Hello,
I'm having issues to get the Pacman 19.1a (GSM) to start. It's stuck at boot. I've tried flashing 19.1, which is booting fine, however this is not allowing me to enter a PIN code. This issue was reported fixed in 19.1a which is why I tried.
I'm using the following kernel: boot-HELLBOY-CM10-201212251747.img
Is anyone else experiencing this issue?
Thanks!
Did u do factory reset n cache wipe
Sent from my One V using Tapatalk 2
bahubali67 said:
Did u do factory reset n cache wipe
Click to expand...
Click to collapse
Sorry forgot to mention that; yes I did and I wiped Dalvik as well.
flash the latest kernel then in recovery do a wipe data/factory reset then try to install
FTMC said:
Sorry forgot to mention that; yes I did and I wiped Dalvik as well.
Click to expand...
Click to collapse
The same experience, also fully wiped. Stuck on Pacman logo.
gulsher said:
flash the latest kernel then in recovery do a wipe data/factory reset then try to install
Click to expand...
Click to collapse
As far as I know, I'm using the latest hellboy kernel. I've tried CM9 and CM10, but they both have the same effect. Should I be mistaken, could you provide me with a download link or version number I should get?
@brusell: So it seems I'm not the only one? I would have reported it in the ROM's topic, however my current postcount does not allow me to...
Resolved in Verdion 19.3
Just wanted to post the "solution"; the issue has been resolved in version 19.3.
Ok so I did a factory reset wiped cache and wiped dalvic, installed pacman 19.3 using twrp and then flashed hellboy kernel and rebooted, but I've been stuck at the pacman logo for 2 hours!! Did I do anything wrong? Can you tell me how u got out of it on 19.1?Do i just wait for the battery to die?
nvr mind got it
swhatevers said:
Ok so I did a factory reset wiped cache and wiped dalvic, installed pacman 19.3 using twrp and then flashed hellboy kernel and rebooted, but I've been stuck at the pacman logo for 2 hours!! Did I do anything wrong? Can you tell me how u got out of it on 19.1?Do i just wait for the battery to die?
nvr mind got it
Click to expand...
Click to collapse
Hey mate, i'm having the same problem as you did. Could you post the solution? Thanks in advance!
Related
Hi everyone,
Having an ongoing issue after I have rooted. Every time I try to play a flash video (youtube etc.) or play any kind of game my phone freezes for around 3 seconds, crash and then restart the whole system. I noticed however that when I plug in the headphones into the jack it sometimes gets rid of the issue while other times it will still restart the phone. I didn't install an custom ROMs, just straight unrooted and I have tried unrooting but the issue still remains. I tried finding an appropriate RUU for my phone but as far as I am aware there is none available for the 1.29 Vodaphone Australia version. If anybody could help I would greatly appreciate it. Thanks in advance.
Did you try to wipe data factory reset.. and wipe dalvik cache from recovery..
1X using ARHD
xhaniGS2 said:
Did you try to wipe data factory reset.. and wipe dalvik cache from recovery..
1X using ARHD
Click to expand...
Click to collapse
Yes I tried factory data reset as well as wiping cache through recovery. What do you mean by dalvik cache?
cooledy66 said:
Yes I tried factory data reset as well as wiping cache through recovery. What do you mean by dalvik cache?
Click to expand...
Click to collapse
In recovery go to advance, first menu is wipe dalvik
Htc One X Venom ViperX Rom & faux123 b004b7 Kernel
dragonesdenano said:
In recovery go to advance, first menu is wipe dalvik
Htc One X Venom ViperX Rom & faux123 b004b7 Kernel
Click to expand...
Click to collapse
Yeah that didn't work.. Any other solutions?
Maybe installing a new rom will help. Try arhd ... Looks like stock rom. No visual changes.
1X using ARHD
xhaniGS2 said:
Maybe installing a new rom will help. Try arhd ... Looks like stock rom. No visual changes.
1X using ARHD
Click to expand...
Click to collapse
Hey I just tried installing a custom ROM but the issue still remains.. really don't know what to do at this stage..
I was using Shpongle (20130518) with latest HELLBOY Kernel. Yesterday I've flashed 20130521 version and I'm experiencing random reboots now. I've returned to 20130518 version via recovery but issue didn't vanished. So I've done a factory reset, cleaned cache and dalvik cahe and reflashed rom(20130521) and gapps. but the issue is still there. what should i do?
gutrea said:
I was using Shpongle (20130518) with latest HELLBOY Kernel. Yesterday I've flashed 20130521 version and I'm experiencing random reboots now. I've returned to 20130518 version via recovery but issue didn't vanished. So I've done a factory reset, cleaned cache and dalvik cahe and reflashed rom(20130521) and gapps. but the issue is still there. what should i do?
Click to expand...
Click to collapse
it's a kernel issue
flash this one http://www.mediafire.com/download/vj8vv8hjyhzg3xv/boot-HELLBOY-42-201305202359.img
Seraz007 said:
it's a kernel issue
flash this one http://www.mediafire.com/download/vj8vv8hjyhzg3xv/boot-HELLBOY-42-201305202359.img
Click to expand...
Click to collapse
ty but I've already using that kernel. I've returned to 20130518 version with full wipe. it's ok for 1 hour or so.
no problem for me with that kernel and the latest build from 1ce
I know man I've read the whole forum, I've seen nobody with random reboot except the scrolling problem with the 20130518 build with old kernel. can this TURBO BOOST mod I've installed be the cause? It was already installed when I have tried the older versions of the ROM and didn't cause any harm that I've noticed though.
nope that mod is gold!
i think it's with the kernel
just try the one i provided and hope it works :fingers-crossed::fingers-crossed::fingers-crossed:
i will try again
well whatsapp doesnt seem to have the third option of privacy uploading dp etc...if u cud luk into the matter
Hey,
I used the 18.5 version of Shpongle with the 14.5 version of HELLBOY kernel until today.
I tried to update only the kernel today to the latest HELLBOY (21.5), so what I did I booted into recovery (TWRP), erased only cache and dalvik, and flash the new version of the kernel using cmd, with these two commands:
Code:
Fastboot flash boot boot.img
fastboot reboot
After my One V rebooted, it got stuck on the HTC welcome screen (with the red development purposes warning) and I can't get out of it, all I can do is reboot then it comes back to that screen.
What did I do wrong? Can I fix that somehow? I can't seem to go back to recovery so it feels lost...
Thank you for any help.
Might be a bad flash. Wipe everything and reflash, then try to reboot.
MameTozhio said:
Might be a bad flash. Wipe everything and reflash, then try to reboot.
Click to expand...
Click to collapse
How do I wipe everything? My PC doesn't recognize the SD and I can't go to recovery...
amiregelz said:
How do I wipe everything? My PC doesn't recognize the SD and I can't go to recovery...
Click to expand...
Click to collapse
Turn off the phone and quickly press volume down and power on to try to get into bootloader otherwise it will turn itself back on (happened to me before when I got a bad flash). Try to get into recovery from there.
MameTozhio said:
Turn off the phone and quickly press volume down and power on to try to get into bootloader otherwise it will turn itself back on (happened to me before when I got a bad flash). Try to get into recovery from there.
Click to expand...
Click to collapse
Thank you! that's what I was looking for. I was hopeless. Thanks again!
Is there something wrong with what I did to update the kernel? I kept the ROM and just deleted the cache and dalvik and then flashed the new kernel. I just don't want to lose all the data so I'm hoping to fix it without wiping everything.
amiregelz said:
Thank you! that's what I was looking for. I was hopeless. Thanks again!
Is there something wrong with what I did to update the kernel? I kept the ROM and just deleted the cache and dalvik and then flashed the new kernel. I just don't want to lose all the data so I'm hoping to fix it without wiping everything.
Click to expand...
Click to collapse
No there was nothing wrong with what you did to update the kernel, you were just unlucky and got a bad flash. If it still gets stuck try reflashing the ROM, without wiping data.
MameTozhio said:
No there was nothing wrong with what you did to update the kernel, you were just unlucky and got a bad flash. If it still gets stuck try reflashing the ROM, without wiping data.
Click to expand...
Click to collapse
Thank you for your help, it was the wrong HELLBOY version - the HELLBOY kernel MediaFire library is very confusing. I picked the CM9 kernel instead of the 42 one. Now everything's working
amiregelz said:
Thank you for your help, it was the wrong HELLBOY version - the HELLBOY kernel MediaFire library is very confusing. I picked the CM9 kernel instead of the 42 one. Now everything's working
Click to expand...
Click to collapse
That's good , and you're welcome btw!
Help
How can i flash kernel under Ubuntu 13.04???
Yes I am a noob. and i need help.
currently I am using Shpongle by 1ceb0x. but i wanted to try the ROM SAMSUNG PSSR - ver.2B1
so I wiped Data, Cache, dalvik and installed the zip file and flashed the boot.img and rebooted the phone.
The HTC boot screen loads up and the samsung screen doesnt go away, the phone just stucks at samsung screen, nothing happens.
Please help me out.
axayyjoshi said:
Yes I am a noob. and i need help.
currently I am using Shpongle by 1ceb0x. but i wanted to try the ROM SAMSUNG PSSR - ver.2B1
so I wiped Data, Cache, dalvik and installed the zip file and flashed the boot.img and rebooted the phone.
The HTC boot screen loads up and the samsung screen doesnt go away, the phone just stucks at samsung screen, nothing happens.
Please help me out.
Click to expand...
Click to collapse
flash this kernel http://www.mediafire.com/download/svpmrbr17a6o8ck/boot-HELLBOY-CM10-201305202359.img
:good:
Seraz007 said:
flash this kernel http://www.mediafire.com/download/svpmrbr17a6o8ck/boot-HELLBOY-CM10-201305202359.img
:good:
Click to expand...
Click to collapse
Still the same problem. I waited for the samsung screen to go away for almost 30 mins now. http://forum.xda-developers.com/images/smilies/crying.gif
any other solution http://forum.xda-developers.com/images/smilies/confused.gif
axayyjoshi said:
Still the same problem. I waited for the samsung screen to go away for almost 30 mins now. http://forum.xda-developers.com/images/smilies/crying.gif
any other solution http://forum.xda-developers.com/images/smilies/confused.gif
Click to expand...
Click to collapse
try with full wipe aka factory reset FROM RECOVERY :fingers-crossed::fingers-crossed:
Seraz007 said:
try with full wipe aka factory reset FROM RECOVERY :fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
sir, sorry for troubling you again.
the problem is still not solved
I was using Slim bean for a quite a long time. Last month I changed my ROM to shpongle. since then the problem has started.
I found out that GPS doesnt work in shpongle so I wanted to revert back to slim bean. so i did full wipe, factory reset, dalvik cache. installed zip from SD card, flashed the boot.img file. but it was stuck at android screen (startup screen of slim)
so i reinstalled shpongle.
now today i wanted to install samsung ROM but the same problem showed up. so I had to again install Shpongle.
now i tried the boot.img provided by you, tried factory reset, but the problem is still there. Can you help out?
thanks in advance
hmm that is strange
that rom should boot should boot with cm10 kernel
i cant think of anything of now
BTW, the latest shpongle has working GPS so maybe u wanna try that
Sorry you're problem's not solved but i cant think of anything else atm
Seraz007 said:
hmm that is strange
that rom should boot should boot with cm10 kernel
i cant think of anything of now
BTW, the latest shpongle has working GPS so maybe u wanna try that
Sorry you're problem's not solved but i cant think of anything else atm
Click to expand...
Click to collapse
It started working
thanks a lot sir, thank you very much
axayyjoshi said:
It started working
thanks a lot sir, thank you very much
Click to expand...
Click to collapse
haha i knew it!
yea no probs!
My boyfriend's Gnex was having problems so I told him to update his phone. We were both using Rufdroid and since I wanted to try a new rom with 4.3 OS I flashed my phone first. I went quite nicely and I'm loving PA3+ right now. Problem is when my bf flashed his gnex following the same steps I did with mine, his home soft key and most apps aren't working. he tried to reflash the rom and reinstall the apps but it's still the same. how can I fix this??
Did he dirty flashed the ROM?
Sent from my Galaxy Nexus using xda premium
pr0xyw0rm said:
Did he dirty flashed the ROM?
Click to expand...
Click to collapse
I followed the steps on the PA3+ thread here.
TeddyChris said:
I followed the steps on the PA3+ thread here.
Click to expand...
Click to collapse
What he meant was did he not do a factory reset, clear cache and clear dalvik when he flashed the ROM?
You have to do a factory reset which deletes the previous OS (including all your apps) then only flash PA3+.
Factory Reset ALONG with SYSTEM wipe
he did all that
Seraz007 said:
Factory Reset ALONG with SYSTEM wipe
Click to expand...
Click to collapse
System wipe is wasted step. The install script formats the /system partition for you.
Factory reset alone is sufficient for a new ROM flash.
Sent from my Galaxy Nexus
Got the problem solved. I changed the recovery from TWRP to CWM and reflashed the rom. There was an error during the installation, but now it's working great.
Anyway, thanks for your help. :good: