Related
So ive gone ahead rooted my P935 many times now quite simple to do. The question is its a Telus phone i'm with rogers, when i flash the v10f kdz i get origninal GB korean rom fully unlocked phone shows using rogers network. When then doing nitro hd unbrick guide and if i only DD the system.img file to install the att version p930 then do the battery pull factory reset my phone still is network unlocked. What i'm tryin to find out is which .img files baseband firmware etc would control this network lock, since when i tried to flash H!ONO v20c P930 cmw flashable ics leak my phone became network locked again. Ijust cant seem to straighten it all out , information overload .
That's very strange, flashing ROMs should not affect network lock. I'm using Bell P930 on Fido, I've flashed AT&T leak and Bell official ICS and neither have re-locked the phone. As long as the IMEI remains unchanged you should be able to use the original unlock code you received to unlock the phone again.
jekostas said:
That's very strange, flashing ROMs should not affect network lock. I'm using Bell P930 on Fido, I've flashed AT&T leak and Bell official ICS and neither have re-locked the phone. As long as the IMEI remains unchanged you should be able to use the original unlock code you received to unlock the phone again.
Click to expand...
Click to collapse
Interesting indeed would it be the v10f .kdz korean somehow. And heres the thing I have recieved no unlock code to unlock. And now am back to running the CM9.1 unlocked working on Rogers Network .
Aha! I figured it out. CM has your Rogers APN preconfigured. The official roms would not lol. I don't know why the SU640 rom was letting you connect. It really shouldn't because your firmware and baseband should be incorrect if you flash it. Anyway, APN has nothing to do with your phone being locked or not
w0095157, are you certain your phone was never carrier unlocked by someone? Did you purchase it brand new in box from a store?
drumist said:
w0095157, are you certain your phone was never carrier unlocked by someone? Did you purchase it brand new in box from a store?
Click to expand...
Click to collapse
brand new in box i swear, telus store,. must be a fluke. but it works id like to find more information on different radios modems, which may change service for me, but i was comparing this to what iphone 4 service was saying side b y side.
Yeah, that makes more sense. Unlock codes are $2 off of eBay, it's worth it just to make sure you don't have any hassles switching between ROMs.
Does LTE work on Rogers when using the Bell unlocked version (P930)?
I know you have to get an LTE Sim card and an LTE enabled plan, but before i buy on eBay and update my plan, i was wondering if the LTE band works on Rogers even if it is a Bell phone.
Yes, i have LTE in my area.
Cheers!
j1paque said:
Does LTE work on Rogers when using the Bell unlocked version (P930)?
I know you have to get an LTE Sim card and an LTE enabled plan, but before i buy on eBay and update my plan, i was wondering if the LTE band works on Rogers even if it is a Bell phone.
Yes, i have LTE in my area.
Cheers!
Click to expand...
Click to collapse
I don't live in Canada, but from what I'm able to find online, Rogers and Bell are using compatible LTE frequencies so it should work just fine.
It works!!!
w0095157 said:
So ive gone ahead rooted my P935 many times now quite simple to do....
Click to expand...
Click to collapse
:laugh:
So after trying million and 1 things I made it work! Baseband and firmware go together and I thought they contain the SIM/network lock so i tried changing them, but apparently all the versions i tried were locked too.... so since the Korean version is with unlocked SIM, why not change directly from it to Cyanogen build ??? Because the wifi is not working!!! and since i did not manage to fine how to install in while offline (CM or Clockworkmod) i flashed from the Korean version just the system.img and voila! I have unlocked SIM with working WIFI ... so putting CM after this was a breeze!
so:
1. flash to Korean V10F_00.kdz
2. root the phone
3.adb shell
su
dd if=/sdcard/system.img of=/dev/block/mmcblk0p27
should have unlocked SIM + everything else working on the ATT version which you can now install Clockworkmod and go for Cyanogen mod of your choice. i did cm-10-20121105-NIGHTLY-p930.zip - works great!
I have a p930 with at&t permanent locked network, I discovered too that the baseband of the korean version is unlocked, I made a thread about this but nobody commented or cared i think lol, you can install any rom you want but remove the baseband of the rom before install.
Dreven said:
:laugh:
So after trying million and 1 things I made it work! Baseband and firmware go together and I thought they contain the SIM/network lock so i tried changing them, but apparently all the versions i tried were locked too.... so since the Korean version is with unlocked SIM, why not change directly from it to Cyanogen build ??? Because the wifi is not working!!! and since i did not manage to fine how to install in while offline (CM or Clockworkmod) i flashed from the Korean version just the system.img and voila! I have unlocked SIM with working WIFI ... so putting CM after this was a breeze!
so:
1. flash to Korean V10F_00.kdz
2. root the phone
3.adb shell
su
dd if=/sdcard/system.img of=/dev/block/mmcblk0p27
should have unlocked SIM + everything else working on the ATT version which you can now install Clockworkmod and go for Cyanogen mod of your choice. i did cm-10-20121105-NIGHTLY-p930.zip - works great!
Click to expand...
Click to collapse
Ok I have a similar problem with an at&t Lp 930, did the unbrick guide to sim unlock with the korean baseband. While in the koream ROM sim was succesfully unlocked. But after following the guide, flashing to AT&T Gingerbread and installing ClockWork Mod, I flashed it to HO!NO! AT&T ICS CWM Flashable ROM once in ICS, I lost Sim Unlock and was back to: Network Locked on Phone.
So what your saying is to basically only flash the system.img after the korean ROM is on the phone and ignore the other images, then after flash to desired ROM with CWM?
And if so, if I flashed to HO!NO! At&t flash, would I still have Locked Network?
Thank You
vagrant00 said:
Ok I have a similar problem with an at&t Lp 930, did the unbrick guide to sim unlock with the korean baseband. While in the koream ROM sim was succesfully unlocked. But after following the guide, flashing to AT&T Gingerbread and installing ClockWork Mod, I flashed it to HO!NO! AT&T ICS CWM Flashable ROM once in ICS, I lost Sim Unlock and was back to: Network Locked on Phone.
So what your saying is to basically only flash the system.img after the korean ROM is on the phone and ignore the other images, then after flash to desired ROM with CWM?
And if so, if I flashed to HO!NO! At&t flash, would I still have Locked Network?
Thank You
Click to expand...
Click to collapse
replace everything but the baseband, that is how I did
Hello XDA and Happy New Year!
I have a rooted Note II sgh-i317m locked to Bell Mobility. I would like to use it with another carrier. I have asked one source for an unlock code, and verified that he received the correct IMEI for the phone, but he said he was unable to get one. I have tried "00000000" but that doesn't work.
I rooted it to try GalaxSim Unlock from the Play store. GalaxSim says it is incompatible with this device. When I click "show details" I get "undefined" for IMEI, Sim Lock status, Product code, Serial Number, and all the rest of the fields. (I believe the app is using the android SDK to query the device for these settings and getting nulls.)
Rooting was a piece of cake with Odin, but how do I unlock my phone?
HB
edited to add details:
Android 4.1.1
Build number JRO03C.I317MVLALJ2
My root method was from galaxynote2root.com; it apparently doesn't touch the firmware.
try this method?
http://forum.xda-developers.com/showthread.php?t=2014982
Yes, this worked just fine! I am now happily using my Note 2 unlocked from Bell (AKA Hell) Mobility on Fido LTE.
Sent from my SGH-I317M using xda app-developers app
rogers sgh-i317m
HELP! I have a note 2 from rogers, i recently tried to do the service mode unlock. (#*197328640#) followed the instructions but i was missing the option 4 nv data. found out later that it was 4.1.1 i had 4.1.2. So got impatient took it to the local cell unlocker fella. He ran into trouble with entering the unlock code then attempted a process that reversed what i did and entered the code, this seemed to work the unlock with the code was successful. Or so it seemed until i inserted my telus sim card then my $780 dollar phone that i just paid cash 2 days ago wont accept the sim or any other including rogers. I tried rooting and i put 4.1.1 back on this got me to the point where it will accept a rogers sim but data will only run edge and call out if i set it to gsm only in network settings this is the only way it will accept a rogers sim only
unlocked
me too , i can not unlock my note 2 canada sgh-í7m
Does this method work if im on the latest 4.3 from Bell?
umirza85 said:
Does this method work if im on the latest 4.3 from Bell?
Click to expand...
Click to collapse
No.
i know it a little late but if there are still people reading this today, well... this worked for me, and you need to be on 4.1.x variant of the note 2 i317/m rom.
I was initially on a 4.4.2 Koodo variant and downgraded it to a 4.1.1 Bell variant before i was able to successfully unlock the phone, since anything after 4.1.x that method is blocked/unavailable/patched. After i was done, my Videotron sim card was accepted and LTE is working flawlessly. Flashing Bells 4.4.2 rom posed no issues and phone was back to normal. Software updates were being checked normally (even tho no official lollipop will ever come from Samsung... but just saying) and nothing was acting out of the ordinary.
only problem is (but shouldn't really be anymore) that your KNOX counter will trip and will stay stuck at 1 due to some hardware thingy being physically changed. This is because of the Security enhancements being violated when downgrading from 4.4.x to 4.1.x. (kitkat to jellybean is a big nono to the SE, but the other way around or kitkat to kitkat is fine)
if any issues or questing feel free to ask GL
Hi, and firstly, thanks to any and all who offer their knowledge to assist my conundrum.
I recently purchased a Bell Canada version of the SG Note 2 (i317), I am on Telus so I attempted to Unlock the phone. I looked online and found people were having success unlocking these phones for free using the *#197327640# method, (whereby you go into the service mode, turn off the PERSHO_256 and then INITIALLIZ).
I tried this method and the phone then seemed to work with my telus sim, but only for voice, not data. When I put in a Bell SIM from a friend, both voice and data worked fine - which tells me its not a hardware (radio) issue. I also tried using another friends Telus SIM and had the same results as mine - which tells me it's not a SIM error. Also, all the settings in the mobile network area appeared to be correctly set up.
So, my next step was to try and reflash the phone to the stock Bell ROM and then just buy an Unlock code. I downloaded the stock ROM (2 different ones actually) and used Odin 3.07 to reload the ROM. I've tried it several times now, with both Bell ROMs and each time it says it's been successful, but the phone remains in the same, partially unlocked state.
It seems as though by using the PERSHO_256 method I have permanently, PARTIALLY unlocked the phone. I can't seem to re-lock it by installing the stock Bell ROM, and since it's unlocked, I can't get the foreign SIM error to come up to enable me to put in my purchased unlock code.
If anyone has any insights, it would be GREATLY appreciated. Thanks!
-Luke
did you check and/or setup the apn? it may be just the apn is not set correctly or you have to manually input hte apn
sounds like just APN needs setting...
APN?
How would I check/setup the APN? Is this to allow me to do a full reflash to a stock ROM or to access data with the phone in it's current state?
left ownsho
So I went into ACCES POINT NAMES and checked the sp.telus.net box, no change. Did a restart. No change Any ideas?
Wooooo Hooooo!!!
So, it's working now!!! I dug a little deeper and found the correct APN settings for TELUS. NOW IT F*@^&#*&@ING WORKS!
Thanks so much for pointing me in the right direction!!!
I wanted to unlock my note 2, it was on 4.1.2 so i decided lets downgrade to 4.1.1 and unlock it. I used the sasktel stock rom to downgrade it and it succesfully downgrade and used the free method to unlock it (*#197328640#). Now, for some reason whenever i put simcard it gives me Emergency calls only 9laready checked the simcard, its working fine, however when i try to put my old inactivated rogers simcard it does tell me unregistered simcard). Please help...
So far i tried to put bell stock firmware but no luck, didnt make any backup for efs or anything (i already tried the same thing on s3 and it worked fine so i thought it will be same thing)
Please help me
Just want to add few things, i install original stock rom through odin bootloader instead of pda. I do get the signal from my simcard if i turned my phone for few hours and turned on but when i restart i do get the same error emergency calls only. Please someone should help me here, i dont mind making a donation to any developer whoever can help me...
Can somebody help me here and atleast guide me. Should i basically call Samsung and get it replaced, its still under warranty?
Does it say emergency calls only or no sim?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
i have the same problem when i tried to unlocked with z3x, i correct all issues , imei, base-band , .. the cell looks perfect just Emergency Calls Only on bell Note 2 i317m, i tried a lot of tricks but didn't work i think it's network security part problem? any one have an idea ?
Ok So I have a T-Mobile Samsung Galaxy s3 (SGH-T999L) (LTE Version). I previously rooted it and installed custom ROM using Cyanogenmod, then changed to TWRP later. Then, i wanted to revert to stock and unrooted my phone. I was told to install latest firmware and did so (Android 4.3 T999LUVUBOH1). Since then, i went from T-Mobile to MetroPCS. The phone is unlocked. When trying to use metropcs sim card on s3, it works for about 5 minutes (able to call & text), then all of a sudden i get NO SIGNAL and cannot do ANYTHING! I used my husband's metropcs sim card and same thing happened. Then, I tried my mom's AT&T sim card and it did seem to work fine for awhile. I tried accessing mobile networks to change APN while I had my mom's sim in there and was able to but when i insert my sim card it says: "Insert Sim to access network services" and there IS a sim in there. Our sims work fine on other phones. I don't understand what's going on. I've tried to flash a modem and even rooting it again, but Odin keeps failing or not responding. I cannot flash ANYTHING!!! Please help!
Flash back to a stock ROM and make sure everything works. Once this is done, call MetroPCS to see if they need to register the phone's imei on their system.
Thanks. It had official stock Rom already on it. I can try again if Odin decides to work for me. I have USB debugging on. I'll let you know what happens. I will also call Metro PCS. thanks again.
audit13 said:
Flash back to a stock ROM and make sure everything works. Once this is done, call MetroPCS to see if they need to register the phone's imei on their system.
Click to expand...
Click to collapse
Omgoodness!! Thank you SO much! Calling metro pcs worked. I'm in disbelief! So simple, I didn't even think of it. I really appreciate your help!
No problem. Glad it worked. We're all here to help and learn from each other.