Just recently flashed EMBRYO 6 on my t989. Everything seams to work fine but the phones will vibrate twice pause and vibrate once more then stop and after 15 seconds repeat again. If the screen locks it will do this one more time then stop. Turned off all vibrating options and still the same thing. Any ideas? I flashed with CWM and TWRP same thing.
is it just randomly doing it, when u get a text? call?
Since the times it boots, it will vibrate for a second twice pause then vibrate again, if I start typing the vibrate will work normally. And the typing vibration goes off when I select it to off, but the other randoms ones still does it.
Edit:It seems something was crashing in the background. Flashed 6.1.1 and now worked.
icenight89 said:
is it just randomly doing it, when u get a text? call?
Click to expand...
Click to collapse
Related
I cant get my SX66 to stop vibrating.
It has 1.40.125 on it.
When ever I connect the Battery or Power it jsut starts Vibrating. When I last had the phone it working order it was on Vibrate. I can get it to boot up and switch it to 'on' from 'vibrate' in the volumen, and that makes no difference. It jsut continues to vibrate.
If I disconnect the battery for 10 seconds and reconnect it will not vibrate till I hit the power button, Though as soon as I do... Vibrate, Vibrate, Vibrate, Vibrate, Vibrate, Vibrate, Vibrate, Vibrate, Vibrate, Vibrate, Vibrate, Vibrate
I cant jsut have the Thing Vibrating all day... People will start to notice a spring in my step...
I've dont a hard reset, still no change...
Any Suggestions?
Thanks,
Scott<-
Thats a vibrator with a phone function on it. I think it is for girls
Ok, seriously, if you have already done a hardreset, it means it isn't software fault. The only thing that I can think of is the notification queue. Try checking that (e.g. similar to cases where others have the problem of alarms that doesn't shut up).
Notification Queue?
Where would I find that? To stop it from Vibrating I need to take the Battery out for a bit and each time to tun it on it starts up from the resrt and goes through all the initial setup stuff. Kind of anoying.
Thanks,
Scott<-
Oh, BTW, there is no SIM in it either. I have a junker phone that I use when working on the house so I dont crush the screen. The SX66 was jsut sitting on the desk and I picked it up and turned it on. after that it hasn't stoped vibrating. I tried putting the SIM in and going through all the things to try with the sam vibrating results...
Maybe I'll jsut give the Phone to my Wife...
I'm doing a SpriteBackup Restore on it now...
The Restore did nothing.
Downloaded MemMaid and deleted everything in the Notification Queue, not jsut the Dups. (-; Still vibrating away...
Then Removed the Battery...
Put it back in, And it was not Vibrating. Well Not untill I got to the Alighment test on setup.
Back to Vibrating...
Hey all, I have Kavanas latest wm6.1 upgrade on my phone... For some reason my phone does not vibrate anymore, any way to fix this problem? Or is my phone jacked?
I'd bet it's a burned out vibrating motor. Check the Wiki, I think it has a link to figure out how to disassemble and motor's can be had for reasonable prices on eBay where people are usually selling broken Excalibur's just for parts.
That would suck... My phone is 2 weeks old...
same
same thing happened to me but if i go back to the tmo rom it works fine idk y
Nano3 said:
Hey all, I have Kavanas latest wm6.1 upgrade on my phone... For some reason my phone does not vibrate anymore, any way to fix this problem? Or is my phone jacked?
Click to expand...
Click to collapse
ok so if you press and hold the "A" key ( also called the # key) for about 3 seconds and the profile changes to vibrate, the phone doesnt vibrate indicating the profile change?
pudgedaddy said:
ok so if you press and hold the "A" key ( also called the # key) for about 3 seconds and the profile changes to vibrate, the phone doesnt vibrate indicating the profile change?
Click to expand...
Click to collapse
No, my phone does not vibrate at all, i tried putting it on the vibrate profile, tried setting my text messages as a vibrate alert... nothing, no vibration at all...
Nano3 said:
No, my phone does not vibrate at all, i tried putting it on the vibrate profile, tried setting my text messages as a vibrate alert... nothing, no vibration at all...
Click to expand...
Click to collapse
what i mean was if you hold down the #(A) key it will put it into the vibrate profile and the phone will actually vibrate at the same time. which is different from when you manually pick the vibrate profile. i was wondering if you had done this yet. im not saying it will fix your problem, more of a confirmation that your vibrate hardware is fubared or not. so take your phone out of the vibrate profile, then press and hold your "#"(A) key until you see the vibrate icon at the top of your iconbar....see if it vibrates.... if it doesn't your, vibrate hardware is toast.
I guess my phone is toasted huh? I tried, it switched to vibrate... but no vibration... gah, whatevs...
my only suggestion for a last ditch effort would be to either/ and hard reset your phone/Reload the official WM6 ROM from your mobile provider.
If re-loading your stock official ROM seems to make it work again, it's up to you if you want to re-try kavana or rick's WM 6.1 ROM. If you do and it stops again, you may just end up being stuck with the Standard RO mon your phone or if the phone's new, you can complain to your mobile provider and have then replace it for you. (just make sure the official ROM is reloaded on it b-4 you send your in)
That happened to me as well. Turned out it was the vibrator motor that was slightly disconnected (probably due to a fall). Took about 5 minutes to get it working again. It's just a matter of opening the back plastic. With the right set of tools, you'll have it done and diagnoses in no time. Even if you need to get a new vibrator motor, it's pretty cheap. Just Google it around.
Hello. I have Cyanogenmod 7 installed on my HTC wildfire. The problem is that when i want hang up the call, i press of course hang up button (whatever it is).
Then the phone freezes 2-5 seconds before the call stops, its very annoying that the call wont stop, no matter how many times i press the hang up button. Then after 3-5 seconds it stops.
Can somebody help me with this!
Thanks already
and sorry for my bad English
+1, any solution?
I have similar problem, phone starts ringing and screen is still off, it tings for few seconds and then it turns on, sometimes it's anoying because I want to answer and I can't. This was on CM7 stable and on nightly I have the same problem.
My phone just started acting up really weird. Whenever I would graze the power button (not even when I push it in all the way) the screen would lock and sometimes immediately turn back on. Some times the power menu would come up. Other times it would just restart and go into this weird loop where the screen would be black, the phone vibrates, and the LED just flashes. Does anyone know what I should do about this? I was using CM9, but this happened pretty randomly so I don't think its a software issue.
DinkinFlicka said:
My phone just started acting up really weird. Whenever I would graze the power button (not even when I push it in all the way) the screen would lock and sometimes immediately turn back on. Some times the power menu would come up. Other times it would just restart and go into this weird loop where the screen would be black, the phone vibrates, and the LED just flashes. Does anyone know what I should do about this? I was using CM9, but this happened pretty randomly so I don't think its a software issue.
Click to expand...
Click to collapse
Try flashing a different ROM. There may a bug or something on that ROM that could be doing that.
DinkinFlicka said:
My phone just started acting up really weird. Whenever I would graze the power button (not even when I push it in all the way) the screen would lock and sometimes immediately turn back on. Some times the power menu would come up. Other times it would just restart and go into this weird loop where the screen would be black, the phone vibrates, and the LED just flashes. Does anyone know what I should do about this? I was using CM9, but this happened pretty randomly so I don't think its a software issue.
Click to expand...
Click to collapse
You just got a malfunction power button. It happens a lot. You need to call samsung/tmobile for warranty service.
Sent from my SGH-T989 using xda app-developers app
Hey guys,
I am having a weird issue,
so today i had a pinch and installed latest CM11 build on my Note 2 using latest CWM. Everything runs perfectly but when i press the power or home button to turn screen on, it lags for over 3 seconds and then screen shows up. same is the case with shutdown.
Furthermore the same thing happens when i receive a call, i stare at the screen with the ringtone playing in the background until the screen shows up. Otherwise everything seems OK.
In my frustration i installed latest version of SlimKat rom but the same issues persist. Anyone got any clues?