I cant get my SX66 to stop vibrating.
It has 1.40.125 on it.
When ever I connect the Battery or Power it jsut starts Vibrating. When I last had the phone it working order it was on Vibrate. I can get it to boot up and switch it to 'on' from 'vibrate' in the volumen, and that makes no difference. It jsut continues to vibrate.
If I disconnect the battery for 10 seconds and reconnect it will not vibrate till I hit the power button, Though as soon as I do... Vibrate, Vibrate, Vibrate, Vibrate, Vibrate, Vibrate, Vibrate, Vibrate, Vibrate, Vibrate, Vibrate, Vibrate
I cant jsut have the Thing Vibrating all day... People will start to notice a spring in my step...
I've dont a hard reset, still no change...
Any Suggestions?
Thanks,
Scott<-
Thats a vibrator with a phone function on it. I think it is for girls
Ok, seriously, if you have already done a hardreset, it means it isn't software fault. The only thing that I can think of is the notification queue. Try checking that (e.g. similar to cases where others have the problem of alarms that doesn't shut up).
Notification Queue?
Where would I find that? To stop it from Vibrating I need to take the Battery out for a bit and each time to tun it on it starts up from the resrt and goes through all the initial setup stuff. Kind of anoying.
Thanks,
Scott<-
Oh, BTW, there is no SIM in it either. I have a junker phone that I use when working on the house so I dont crush the screen. The SX66 was jsut sitting on the desk and I picked it up and turned it on. after that it hasn't stoped vibrating. I tried putting the SIM in and going through all the things to try with the sam vibrating results...
Maybe I'll jsut give the Phone to my Wife...
I'm doing a SpriteBackup Restore on it now...
The Restore did nothing.
Downloaded MemMaid and deleted everything in the Notification Queue, not jsut the Dups. (-; Still vibrating away...
Then Removed the Battery...
Put it back in, And it was not Vibrating. Well Not untill I got to the Alighment test on setup.
Back to Vibrating...
Related
Hi,
Sometimes (usually when I wake up in the morning), when i turn my xda iis on, it freezes, showing a black screen, but most time it doesn't turn on at all, the weird thing is that the network led keeps blinking. It looks like as if the phone is in standby but doesn't respond to any key at all, and doesn't ring... basically it is dead, except for the led that blinks :?
The only way to bring it back to life is to soft reset... every morning, and sometimes during the day... quite annoying if you're expecting a call.
Anyone has this problem?
Hey all, I have Kavanas latest wm6.1 upgrade on my phone... For some reason my phone does not vibrate anymore, any way to fix this problem? Or is my phone jacked?
I'd bet it's a burned out vibrating motor. Check the Wiki, I think it has a link to figure out how to disassemble and motor's can be had for reasonable prices on eBay where people are usually selling broken Excalibur's just for parts.
That would suck... My phone is 2 weeks old...
same
same thing happened to me but if i go back to the tmo rom it works fine idk y
Nano3 said:
Hey all, I have Kavanas latest wm6.1 upgrade on my phone... For some reason my phone does not vibrate anymore, any way to fix this problem? Or is my phone jacked?
Click to expand...
Click to collapse
ok so if you press and hold the "A" key ( also called the # key) for about 3 seconds and the profile changes to vibrate, the phone doesnt vibrate indicating the profile change?
pudgedaddy said:
ok so if you press and hold the "A" key ( also called the # key) for about 3 seconds and the profile changes to vibrate, the phone doesnt vibrate indicating the profile change?
Click to expand...
Click to collapse
No, my phone does not vibrate at all, i tried putting it on the vibrate profile, tried setting my text messages as a vibrate alert... nothing, no vibration at all...
Nano3 said:
No, my phone does not vibrate at all, i tried putting it on the vibrate profile, tried setting my text messages as a vibrate alert... nothing, no vibration at all...
Click to expand...
Click to collapse
what i mean was if you hold down the #(A) key it will put it into the vibrate profile and the phone will actually vibrate at the same time. which is different from when you manually pick the vibrate profile. i was wondering if you had done this yet. im not saying it will fix your problem, more of a confirmation that your vibrate hardware is fubared or not. so take your phone out of the vibrate profile, then press and hold your "#"(A) key until you see the vibrate icon at the top of your iconbar....see if it vibrates.... if it doesn't your, vibrate hardware is toast.
I guess my phone is toasted huh? I tried, it switched to vibrate... but no vibration... gah, whatevs...
my only suggestion for a last ditch effort would be to either/ and hard reset your phone/Reload the official WM6 ROM from your mobile provider.
If re-loading your stock official ROM seems to make it work again, it's up to you if you want to re-try kavana or rick's WM 6.1 ROM. If you do and it stops again, you may just end up being stuck with the Standard RO mon your phone or if the phone's new, you can complain to your mobile provider and have then replace it for you. (just make sure the official ROM is reloaded on it b-4 you send your in)
That happened to me as well. Turned out it was the vibrator motor that was slightly disconnected (probably due to a fall). Took about 5 minutes to get it working again. It's just a matter of opening the back plastic. With the right set of tools, you'll have it done and diagnoses in no time. Even if you need to get a new vibrator motor, it's pretty cheap. Just Google it around.
Just got my TP2 today, and one of the features I was looking forwards to using was the automatic speaker phone.
I turn the phone over on a call, and the Mute button lights up. Then it vibrates and the speaker turns on. Then it vibrates off, then on. Sometimes it just turns onthe Mute, but not the speaker.
Obviously I have made sure that Phone->Options->Advanced Turn on speaker when flipped is checked.
The speakerphone works fine when I press the button.
I did try searching for this, and all I found was someone whom upgraded to 6.5 and didn't recheck that option.
I'm using stock, just out of the box. Installed apps -> Facebook, PockeTwit, ZoomBar Addon.
Any help is as always, greatly appreciated. Thanks in advanced!
q426669 said:
Just got my TP2 today, and one of the features I was looking forwards to using was the automatic speaker phone.
I turn the phone over on a call, and the Mute button lights up. Then it vibrates and the speaker turns on. Then it vibrates off, then on. Sometimes it just turns onthe Mute, but not the speaker.
Obviously I have made sure that Phone->Options->Advanced Turn on speaker when flipped is checked.
The speakerphone works fine when I press the button.
I did try searching for this, and all I found was someone whom upgraded to 6.5 and didn't recheck that option.
I'm using stock, just out of the box. Installed apps -> Facebook, PockeTwit, ZoomBar Addon.
Any help is as always, greatly appreciated. Thanks in advanced!
Click to expand...
Click to collapse
It's not just turning it over, but putting it *facedown* on a flat surface. Did you try that?
q426669 said:
I turn the phone over on a call, and the Mute button lights up. Then it vibrates and the speaker turns on. Then it vibrates off, then on. Sometimes it just turns onthe Mute, but not the speaker.
Click to expand...
Click to collapse
I'd say that unless you've been setting it down on an uneven surface -- or not actually setting down at all as the other guy suggests -- there must be something wrong with your phone.
There's no setting/configuration that would cause the inconsistent erratic behavior you describe -- going on then off, vibrating, etc -- if it's setting on a flat table-top or similar.
Got a new phone yesterday. Went to the store, called the store, set my phone down and said "Isn't this supposed to be on speaker now?" and that was that lol.
Thanks for the help guys
Yesterday I had a small moment when it didn't want to vibrate. But quickly after it started working again. This morning I pick it up and notice the keyboard doesn't vibrate.
And now it doesn't vibrate at ALL. Nomather what kind of setting, I tried soft reset. Tried Sound Manager and now even tried hard reset. Still no luck.
Well, just hard resetted and while restoring my settings, apparantly the 'Updater' app isn't working.
Edit:
Just great.. and now it hang on a black screen. It's a Sense-less screen. If I hold the power button, I get options to turn off and such.
Okay, hard resetted. Still won't vibrate. What now?
Edit2:
Just great, on my girlsfriend's advice. I just dropped it on my bed to kinda give it that 'throw' effect. And can you believe that it actually works again?
I'm just wondering now for how long
I fully charged the phone and I used the watch for about an hour. It seemed to work fine for a bit but I notieced it would frequently just turn off and I'd have to press the side button for the 3 second reset to get it to work again. Now the watch won't turn on no matter what. When it's plugged in, it will keep vibrating. It will vibrate for a second, stop for a second, vibrate, stop, etc but it still wont' turn on or stop vibrating while it's plugged in. Any ideas?
Did you know what was wrong? I have the same issue.