I got my One X few days ago, I unlocked the device and flashed custom ROM right away, then I noticed that the screen is little broken. It's moving and it makes creaking noise when you press it, so I want to take it back and have it fixed or changed. So should I revert back to stock and relock the device or not? I'm little worried about warranty though, they shouldn't really care what I did with the software.
Revert to stock, it will increase the possibility to get it repaired for free.
Sent from my HTC One X using xda app-developers app
TToivanen said:
Revert to stock, it will increase the possibility to get it repaired for free.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Thank you! So is there currently a way to go back to official JB version that HTC released if I'm on 1.36 hboot?
vasar said:
Thank you! So is there currently a way to go back to official JB version that HTC released if I'm on 1.36 hboot?
Click to expand...
Click to collapse
Sure. Do these fastboot commands and post results here.
"fastboot getvar cid"
"fastboot oem readcid"
Sent from my HTC One X using xda app-developers app
TToivanen said:
Sure. Do these fastboot commands and post results here.
"fastboot getvar cid"
"fastboot oem readcid"
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
HTC__032
Whoops, I meant
Code:
fastboot getvar version-main
vasar said:
HTC__032
Click to expand...
Click to collapse
http://htcruu.com/securekey.php?fil...Radio_5.1204.162.29_release_302015_signed.exe
Technically, 3.14.401.27 is for hboot 1.36, but the link above is to the latest (1.39)
You need to relock:
fastboot oem lock
And then run the RUU as administrator (right click).
It will wipe your phone.
TToivanen said:
Whoops, I meant
Code:
fastboot getvar version-main
Click to expand...
Click to collapse
version-main: 3.14.401.27
BenPope said:
http://htcruu.com/securekey.php?fil...Radio_5.1204.162.29_release_302015_signed.exe
Technically, 3.14.401.27 is for hboot 1.36, but the link above is to the latest (1.39)
You need to relock:
fastboot oem lock
And then run the RUU as administrator (right click).
It will wipe your phone.
Click to expand...
Click to collapse
That will get me on the same version of JB I got from HTC OTA?
vasar said:
version-main: 3.14.401.27
That will get me on the same version of JB I got from HTC OTA?
Click to expand...
Click to collapse
No, it will get you a slightly newer one, one that was released just after.
BenPope said:
No, it will get you a slightly newer one, one that was released just after.
Click to expand...
Click to collapse
Okay, thank you very much!
Yes, and if you want, you can restore a stock nandroid backup. Your choice, the result will be the same.
Seems to me that going with Nandroid Backup would be safer? If I made a backup after unlocking the bootloader and installing recovery, would restoring that work and then just relock the bootloader?
Yes, you have to flash back the stock recovery after restoring the nandroid ! Not the the recovery from the nandroid because that is the custom recovery
This is the stock recovery for the 3.14 software
http://db.tt/C1SWP2ZJ
After that when everything works you have to lock the bootloader
Fastboot oem lock
Then you are as stock as you can be
vasar said:
Seems to me that going with Nandroid Backup would be safer?
Click to expand...
Click to collapse
Not particularly, it amounts to the same thing, but with the RUU there is less chance of typing something wrong or getting the wrong file.
I tried to update with the RUU provided, it started the process and suddenly stopped and said it can't update my device and there was signature error or something on the top of the window. So it rebooted my device into bootloader and I can't boot into the ROM. Recovery and all that is gone as well. What should I do now?
What happens when you try to get to recovery?
What hboot are you on?
What does this command give from fastboot mode:
fastboot getvar version-main
BenPope said:
What happens when you try to get to recovery?
What hboot are you on?
What does this command give from fastboot mode:
fastboot getvar version-main
Click to expand...
Click to collapse
hboot 1.36
When I try to get to recovery it says this version is for development purposes only...
3.14.401.27
I've only ever seen that message on Evita with Endeavoru software.
---------- Post added at 04:36 PM ---------- Previous post was at 04:34 PM ----------
Did you try it again? Are you flashing 3.14.401.27 or .31?
BenPope said:
I've only ever seen that message on Evita with Endeavoru software.
Click to expand...
Click to collapse
So have I bricked the phone or should I follow one of those disaster recovery tutorials? (a bit worried here)
Try again, if that doesn't work, download the other (.31 or .27) and try that, it's not bricked, don't worry.
Related
I'm trying to return my One V but i don't have my stock recovery.img
Can anyones out there post this .img for me, just want to return to stock rom.
Sorry for my bad english
To return to stock ROM you need to flash RUU follow these steps to do it.
http://forum.xda-developers.com/showpost.php?p=25036430&postcount=17
You can find the RUU here:
http://forum.xda-developers.com/showthread.php?t=1591059
If you only want to flash the stock recovery than I recommend to use the All In One Tool:
http://forum.xda-developers.com/showthread.php?t=1676686
hlavicka82 said:
To return to stock ROM you need to flash RUU follow these steps to do it.
http://forum.xda-developers.com/showpost.php?p=25036430&postcount=17
You can find the RUU here:
http://forum.xda-developers.com/showthread.php?t=1591059
If you only want to flash the stock recovery than I recommend to use the All In One Tool:
http://forum.xda-developers.com/showthread.php?t=1676686
Click to expand...
Click to collapse
the third sentence he mention relock the bootloader. can you tell me how to relock the bootloader?
anyway this is the first time i flash rom for htc. so thanks youv very much
You can re-lock using the Hansoon2000's All-In-One Kit or using the command fastboot oem lock in Windows. Ten the bootloader screen should say *RELOCKED* on the top of the screen.
hlavicka82 said:
You can re-lock using the Hansoon2000's All-In-One Kit or using the command fastboot oem lock in Windows. Ten the bootloader screen should say *RELOCKED* on the top of the screen.
Click to expand...
Click to collapse
after using the AllInOneSuit to relock the device, i use this ruu_primo_u_ics_40a_htc_asia_wwe_1.58.707.3_radio_20.66.30.0831u_3831.15.00.23_m_release_252880_signed.exe to flash but it said i have a wrong ultilites, and when to fastboot it said cid incorrect? what is wrong here? can you tell me the problem here. im from asia
chiplovez9x said:
...... im from asia
Click to expand...
Click to collapse
Accidently press the thank button
Which part of Asia ? Be more specific, there are a few RUU for Asia.
ckpv5 said:
Accidently press the thank button
Which part of Asia ? Be more specific, there are a few RUU for Asia.
Click to expand...
Click to collapse
..from Viet Nam , so is there any solution?
Btw where are you from?
Then that is the correct RUU for your device.
unlock your bootloader again.
Try to manually flash this recovery in fastboot mode - fastboot flash recovery recovery_signed.img
then relock bootloader again in fastboot mode - fastboot oem lock
then flash RUU
Edit : you also can do as what I posted before : http://forum.xda-developers.com/showpost.php?p=25998043&postcount=16
ckpv5 said:
Then that is the correct RUU for your device.
unlock your bootloader again.
Try to manually flash this recovery in fastboot mode - fastboot flash recovery recovery_signed.img
then relock bootloader again in fastboot mode - fastboot oem lock
then flash RUU
Click to expand...
Click to collapse
when i try to flash that ruu, it said error [131]: Customer ID error? don't know what's wrong right now.
Btw this device i bought from Singapore, sr for my bad
Check what is your CID.. in fastboot mode : fastboot oem readcid
If it is not HTC__044, the RUU is not for your device.
ckpv5 said:
Check what is your CID.. in fastboot mode : fastboot oem readcid
If it is not HTC__044, the RUU is not for your device.
Click to expand...
Click to collapse
I wrote this command to fastboot. It's said Command Error !!
SO what is the problem here, . Please help
You are still on a custom ROM, right ? Download CID Getter from Play Store and run it, it will show your CID.
ckpv5 said:
You are still on a custom ROM, right ? Download CID Getter from Play Store and run it, it will show your CID.
Click to expand...
Click to collapse
like what i said before, i relocked my phone and now try to flash the ruu. so is there another way to see cid code?
chiplovez9x said:
like what i said before, i relocked my phone and now try to flash the ruu. so is there another way to see cid code?
Click to expand...
Click to collapse
If the custom ROM is still intact (you never wipe the system & data in recovery), relocked bootloader has no effect on it. Can you still boot your phone ?
chiplovez9x said:
like what i said before, i relocked my phone and now try to flash the ruu. so is there another way to see cid code?
Click to expand...
Click to collapse
ckpv5 said:
If the custom ROM is still intact (you never wipe the system & data in recovery), relocked bootloader has no effect on it. Can you still boot your phone ?
Click to expand...
Click to collapse
Of course, is there another way to see or i should reflash a custom rom
help please
If you still can boot your device, as I mentioned earlier download CID Getter from Play Store.
Else, it seems that you need to reflash a custom ROM and download the app to check your CID.
Here is mine as example (details from CID Getter)
ckpv5 said:
If you still can boot your device, as I mentioned earlier download CID Getter from Play Store.
Else, it seems that you need to reflash a custom ROM and download the app to check your CID.
Here is mine as example (details from CID Getter)
Click to expand...
Click to collapse
My cid is HTC_621.
chiplovez9x said:
I wrote this command to fastboot. It's said Command Error !!
SO what is the problem here, . Please help
Click to expand...
Click to collapse
Just test, yes the command does not work on One V.
But fastboot getvar cid works
---------- Post added at 01:21 AM ---------- Previous post was at 01:13 AM ----------
chiplovez9x said:
My cid is HTC_621.
Click to expand...
Click to collapse
It is a TW version. Not so sure whether it is a branded for Taiwan Mobile, but give this RUU a try.
RUU_PRIMO_U_ICS_40A_hTC_Asia_TW_1.57.709.2_Radio_2 0.66.30.0831U_3831.15.00.20_M_release_252814_signe d.exe
Link : http://dl.dbank.com/c00cmbkmpp
I don't read chinese, but click on the filename written in blue, it will download.
ckpv5 said:
Just test, yes the command does not work on One V.
But fastboot getvar cid works
---------- Post added at 01:21 AM ---------- Previous post was at 01:13 AM ----------
It is a TW version. Not so sure whether it is a branded for Taiwan Mobile, but give this RUU a try.
RUU_PRIMO_U_ICS_40A_hTC_Asia_TW_1.57.709.2_Radio_2 0.66.30.0831U_3831.15.00.20_M_release_252814_signe d.exe
Link : http://dl.dbank.com/c00cmbkmpp
I don't read chinese, but click on the filename written in blue, it will download.
Click to expand...
Click to collapse
How did you find this rom? I successfully installed this rom on my device
Btw thanks you very much
chiplovez9x said:
How did you find this rom? I successfully installed this rom on my device
Btw thanks you very much
Click to expand...
Click to collapse
No problem mate, glad it works for you
There are a few thread in Sensation and One X forum that listed the CID no. and the RUU already posted here : http://forum.xda-developers.com/showpost.php?p=26291033&postcount=18
Good night friend.
hello
i want to go back to stock jb. Now i dont know wich ruu i need
hox data:
HTC ONE X (International Tegra 3)
S-ON
Main-Version:
3.14.401.619
CID:
HTC_102
HBoot:
1.31.0000
Radio:
RADIO-5.1204.162.29
Region:
Europe-Germany
i found this but not sure it is the right
htcfanboys.com/download/rawdealer/?action=view&file=16036
cant post the direkt link... xda rules
thanks for anwers
Go to software number in settings..it'll be easier to find it that way
no signature....problem ?!?!?!
donhashem.dh said:
no signature....problem ?!?!?!
Click to expand...
Click to collapse
first what do u mean with this ?
and on software number there is ordroid 11.1.2 that i am actually running ... but thats not important for the ruu or ?
Dude the software number is the most important thing ....the name if the ruu comes as the name as the software number
no signature....problem ?!?!?!
donhashem.dh said:
Dude the software number is the most important thing ....the name if the ruu comes as the name as the software number
no signature....problem ?!?!?!
Click to expand...
Click to collapse
what did u mean exactly ... how i say software number is ordroid 11.1.2
build.number 3.14.401.27... u mean this ?
Do this,
Phone in bootloader USB menu
Fastboot oem readcid
And
Fastboot getvar version-main
Post these 2 results here !
I think this is the one you need.
http://www.htcruu.com/Endeavor/RUU_...Radio_5.1204.162.29_release_298897_signed.exe
Put the phone in bootloader Fastboot USB menu
Fastboot oem lock
After that run the ruu from pc WITH admin rights !
Yeah yeah...both are important .....why am I imagining you an 14 year old,spoiled, Italian guy
no signature....problem ?!?!?!
MarcelHofs said:
Do this,
Phone in bootloader USB menu
Fastboot oem readcid
And
Fastboot getvar version-main
Post these 2 results here !
Click to expand...
Click to collapse
???? what i have i wrote in my first post ???
hello
i want to go back to stock jb. Now i dont know wich ruu i need
hox data:
HTC ONE X (International Tegra 3)
S-ON
Main-Version:
3.14.401.619
CID:
HTC_102
HBoot:
1.31.0000
Radio:
RADIO-5.1204.162.29
Region:
Europe-Germany
i found this but not sure it is the right
htcfanboys.com/download/rawdealer/?action=view&file=16036
cant post the direkt link... xda rules
thanks for anwers
Click to expand...
Click to collapse
Then use my answer + link
MarcelHofs said:
Then use my answer + link
Click to expand...
Click to collapse
thanks i will try it...
and donhashem.dh what was your problem ? all infos was posted and no im not 14 and iam not an italia guy
Maybe he got out of bed on the wrong foot today
MarcelHofs said:
Maybe he got out of bed on the wrong foot today
Click to expand...
Click to collapse
maybe ok i extract the rom.zip...there inside was an .img named HBOOT 1.36..but im on an cid that only support hboot 1.31 ... what now ?
Why don't u just run the ruu as it is ?
Ow and by the way ..... Your cid is in the list with the 1.36 hboots !
Ow and back up your sd card as it may be wiped !
MarcelHofs said:
Why don't u just run the ruu as it is ?
Ow and by the way ..... Your cid is in the list with the 1.36 hboots !
Ow and back up your sd card as it may be wiped !
Click to expand...
Click to collapse
i see i am not up to date okay ehm what are the steps to go back to stock ?
i read so much tutorials and some says flash first stock recovery and so on...
i heard a lot about bricking hox after flash an ruu so i want make any mistakes
Do you have the stock nandroid backup ?
Strange.....i never saw somebody brick his phone by running a ruu
But you should have took a backup from the original Rom.
Flash is.back with its boot.img after that you download the 3.14 stock recovery and you are done !
MarcelHofs said:
Do you have the stock nandroid backup ?
Strange.....i never saw somebody brick his phone by running a ruu
But you should have took a backup from the original Rom.
Flash is.back with its boot.img after that you download the 3.14 stock recovery and you are done !
Click to expand...
Click to collapse
no as i flashed the first custom rom i missed to backup with nandroid
zottel1993 said:
no as i flashed the first custom rom i missed to backup with nandroid
Click to expand...
Click to collapse
:thumbdown: well if you don't want to run the ruu you have to extract the rom.zip and the boot.img. I have the stock recovery here
http://db.tt/1aAq4ihB
Run the ruu WITHOUT the phone connected, it will create a temp folder (search for the newest temp folder) it will contain the Rom.zip with the boot.img inside (at least i assume that, as i never did this)
Flash the boot.img, perform a full wipe and flash the rom, boot into android to confirm that it works and then flash the stock recovery
MarcelHofs said:
:thumbdown: well if you don't want to run the ruu you have to extract the rom.zip and the boot.img. I have the stock recovery here
http://db.tt/1aAq4ihB
Click to expand...
Click to collapse
oh ehm i want to run the ruu but i dont know what i must do before i can run ist ...sry for missunderstandig
MarcelHofs said:
Do this,
Phone in bootloader USB menu
Fastboot oem readcid
And
Fastboot getvar version-main
Post these 2 results here !
I think this is the one you need.
http://www.htcruu.com/Endeavor/RUU_...Radio_5.1204.162.29_release_298897_signed.exe
Put the phone in bootloader Fastboot USB menu
Fastboot oem lock
After that run the ruu from pc WITH admin rights !
Click to expand...
Click to collapse
Here it is again ......
---------- Post added at 03:12 PM ---------- Previous post was at 03:00 PM ----------
New link for the stock recovery, renamed it
http://db.tt/C1SWP2ZJ
But when you run the ruu you don't need it, the ruu will flash the boot.img and stock recovery back
MarcelHofs said:
Here it is again ......
Click to expand...
Click to collapse
thank you everythink i allright and now i have a clean version of the newest jb
Hey,
I have HOX via the worst carrier ever - Vodafone.
The phone came with 1.29.161.13 version.
During the time, I decided to upgrade the software to 2.17.401.2.
Unfortunately I need to go back to 1.29.161.13 version if I want JB.
I downloaded the 1.29.161.13 RUU but I always get the "ERROR [155]: UNKNOWN ERROR".
Does anyone know why I get this error?
Where could I download the .zip version so I will flash?
Thanks!
You need the ruu that starts with 2.17 ..... and if you can't find it you can download a nandroid backup from here
http://forum.xda-developers.com/showthread.php?t=1975140
The one that matches 2.17.161
Flash the boot.img from the nandroid and do a full wipe in recovery then restore the nandroid and reboot to check if it works ! If it works you have to flash back the stock recovery
http://db.tt/U5CK4noo
Then update officially
fastboot oem lock
Drop to fastboot mode on the phone, right click the RUU and run as administrator.
If that doesn't work, run:
fastboot getvar version-main
And from there figure out the correct RUUBto run, hopefully you can find it on htcruu.com
BenPope said:
fastboot oem lock
Drop to fastboot mode on the phone, right click the RUU and run as administrator.
If that doesn't work, run:
fastboot getvar version-main
And from there figure out the correct RUUBto run, hopefully you can find it on htcruu.com
Click to expand...
Click to collapse
Thanks ben ! Forgot to mention that this time
Mr Hofs said:
Thanks ben ! Forgot to mention that this time
Click to expand...
Click to collapse
We can't be perfect all the time
BenPope said:
We can't be perfect all the time
Click to expand...
Click to collapse
Hahah no ! Spot on mate, we are not robots
Mr Hofs said:
Hahah no ! Spot on mate, we are not robots
Click to expand...
Click to collapse
Not robots... Androids!
BenPope said:
Not robots... Androids!
Click to expand...
Click to collapse
Thanks for your help ppl!
I just needed to run the command fastboot oem lock and the RUU worked as well...
Thank you again!
A friend of mine bought a almost new One X and in fastboot the cid says NONE. It is a Vodafone (not locked) rom with Hboot 0.95.000 with software version 1.29.161.13.
Can he wipe the device (with or without root) and flash a WWE rom?
-Edit- CID is VODAP102.
Is it possible to somehow wipe the device and change the cid to E_11 and flash a WWE RUU?
LOL, he has a ViperX background after factory reset and the bootloader says locked, maybe the device was bricked and repaired.
He should try fastboot oem readcid instead of fastboot getvar cid.
Sent from my HTC One X using xda app-developers app
gee2012 said:
A friend of mine bought a almost new One X and in fastboot the cid says NONE. It is a Vodafone (not locked) rom with Hboot 0.95.000 with software version 1.29.161.13.
Can he wipe the device (with or without root) and flash a WWE rom?
Click to expand...
Click to collapse
if you can boot into custom recovery (TWRP), then I don't see why you wouldn't be able to flash a custom rom, without rooting.
I would definitely reccomend you make a backup first, before flashing a custom ROM.
I'm also unfamiliar with Hboo 0.95.000. Research to make sure you don't have to fastboot flash the boot.img, before flashing the custom ROM.
gee2012 said:
A friend of mine bought a almost new One X and in fastboot the cid says NONE. It is a Vodafone (not locked) rom with Hboot 0.95.000 with software version 1.29.161.13.
Can he wipe the device (with or without root) and flash a WWE rom?
-Edit- CID is VODAP102.
Is it possible to somehow wipe the device and change the cid to E_11 and flash a WWE RUU?
LOL, he has a ViperX background after factory reset and the bootloader says locked, maybe the device was bricked and repaired.
Click to expand...
Click to collapse
No its not possible t change the CID, and no he can't use a different RUU. If he wants to use a RUU te numbers from the main version has to match ! He has to unlock the bootloader with the HTCDev site and flash a custom recovery to flash roms.
And when the CID comes out as VODAP102 it's def locked to the carrier otherwise it should say HTC__CIDnumber
and some more info : Hboot 0.95 means he was originally on a software version 1.29.***.** that's android 4.0.3.....most phones have already been upgraded to hboot 1.12 (software 2.17.***.**) and then the JB versions (software 3.14.***.** and up)
Mr Hofs said:
No its not possible t change the CID, and no he can't use a different RUU. If he wants to use a RUU te numbers from the main version has to match ! He has to unlock the bootloader with the HTCDev site and flash a custom recovery to flash roms.
And when the CID comes out as VODAP102 it's def locked to the carrier otherwise it should say HTC__CIDnumber
Click to expand...
Click to collapse
He uses a T-Mobile simcard and he has a call/data connection!
gee2012 said:
He uses a T-Mobile simcard and he has a call/data connection!
Click to expand...
Click to collapse
Never seen that before, you got this cid with the fastboot oem readcid command ?
is it possible he got a carrier unlock code from ebay or something, probably not know because he bought it second hand.....
Mr Hofs said:
Never seen that before, you got this cid with the fastboot oem readcid command ?
Click to expand...
Click to collapse
Yes. Does he have to flash a different Hboot to install ViperX after unlocking the bootloader?
He might have got a network unlock code from vodafone or a 3rd party unlocking business.
Sent from my HTC One X using xda app-developers app
TToivanen said:
He might have got a network unlock code from vodafone or a 3rd party unlocking business.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Yeah just thought of that, edited my post
---------- Post added at 09:16 PM ---------- Previous post was at 09:15 PM ----------
Yes to run the JB viper x he needs a hboot 1.3* ..... He can run the viper x ics version without problems at the moment
Mr Hofs said:
Yeah just thought of that, edited my post
---------- Post added at 09:16 PM ---------- Previous post was at 09:15 PM ----------
Yes to run the JB viper x he needs a hboot 1.3* ..... He can run the viper x ics version without problems at the moment
Click to expand...
Click to collapse
Not the Yellybean rom`s or should he wait for a Vodafone Jellybean update first?
gee2012 said:
Not the Yellybean rom`s or should he wait for a Vodafone Jellybean update first?
Click to expand...
Click to collapse
Yes correct, but he is not on a stock rom so he can't update now......let me find the ruu he needs to get back to stock. Be back in a minute !.
Download this one
http://androidfiles.org/ruu/securek...Radio_1.1204.105.14_release_264070_signed.exe
Put the phone in fastboot usb and lock the bootloader
Fastboot oem lock
Keep the phone in fastboot usb mode with the locked bootloader and right click the ruu on the pc and select run as administrator
Should do the trick, after this he is back to stock and ready for the update to JB
Thanks a lot mate :good:
Will post how it went.
gee2012 said:
Thanks a lot mate :good:
Will post how it went.
Click to expand...
Click to collapse
You can PM me in dutch.....limburgs.....LOL
Zal ich doon, ich bin un Winkbuul
gee2012 said:
Zal ich doon, ich bin un Winkbuul
Click to expand...
Click to collapse
Have you tried restarting?
Sent from my HTC One X+ using xda app-developers app
nespid said:
Have you tried restarting?
Sent from my HTC One X+ using xda app-developers app
Click to expand...
Click to collapse
I have received and installed 3 major Vodafone updates and am now on JB. Will unlock the bootloader, make a CWM backup and flash ViperX rom. All is well so far thank god, thanks guys for your help
Nice !!!
So can i say ....
CASE CLOSED ?
Yes you can :victory: Hboot is now 1.36.0000.
I have a wlan issue with my phone and HTC told me to send it into repair.
Do i need to unroot in before i sent it ?
The problem is I have bought it rooted and so i dont have any original backup :S.
http://www.youtube.com/watch?feature=player_embedded&v=7dft95KOZaM
I have the exact problem as in the link
Is it completely stock rom? Only root access has been given? Or is it modified?
If there's only root access, factory reset from Bootloader to remove the root and flash the stock recovery and then relock the Bootloader...
Post the result of
Fastboot getvar version-main
-Sent from my IceCold One X!
vin4yak said:
Is it completely stock rom? Only root access has been given? Or is it modified?
If there's only root access, factory reset from Bootloader to remove the root and flash the stock recovery and then relock the Bootloader...
Post the result of
Fastboot getvar version-main
-Sent from my IceCold One X!
Click to expand...
Click to collapse
It came with android revolution HD
but now i have viper installed.
I think if you're on stock already, you can just unroot from the SuperSU app.
Sent from my HTC One X using Tapatalk 4 Beta
I am not on stock and i dont have a nandroid backup
athulele said:
I think if you're on stock already, you can just unroot from the SuperSU app.
Sent from my HTC One X using Tapatalk 4 Beta
Click to expand...
Click to collapse
He says he's on arhd... :silly:
grandem said:
I am not on stock and i dont have a nandroid backup
Click to expand...
Click to collapse
Post the result of :
Fastboot getvar version-main
We Will find a ruu or a nandroid backup so that can go back to full stock!
-Sent from my IceCold One X!
version-main: 3.14.401.27
grandem said:
version-main: 3.14.401.27
Click to expand...
Click to collapse
Lock your Bootloader if it's not:
Fastboot oem lock
Then run this ruu from pc with admin privileges! Your phone needs to be in bootloader mode when running the ruu.
Download : http://bugsylawson.com/files/file/1...27-radio-5120416229-release-298897-signedexe/
-Sent from my IceCold One X!
Nice thancks relocked securitiy warning beeing displayed is correct ?
Or can i remove this?
vin4yak said:
Lock your Bootloader if it's not:
Fastboot oem lock
Then run this ruu from pc with admin privileges! Your phone needs to be in bootloader mode when running the ruu.
Download : http://bugsylawson.com/files/file/1...27-radio-5120416229-release-298897-signedexe/
-Sent from my IceCold One X!
Click to expand...
Click to collapse
Now i only can get into the bootloader but the htc porgramm doesnt recognize my phone :S.
grandem said:
Now i only can get into the bootloader but the htc porgramm doesnt recognize my phone :S.
Click to expand...
Click to collapse
After locking the bootloader did you run the ruu with admin privileges? If the ruu isn't recognizing your device, it means that connection isn't being established so it's either a faulty driver or cable may be??
Are you able to run fastboot commands??
grandem said:
Nice thancks relocked securitiy warning beeing displayed is correct ?
Or can i remove this?
Click to expand...
Click to collapse
That's because you have locked the bootloader with a custom recovery on AFAIK,.. no need to worry about that.... it comes n goes ...
yes i can do fastboot commands but now it also shows me
Battery level to low.
I hope it loads in fastboot mode ?