Strange interference noise on my phone - Desire HD Q&A, Help & Troubleshooting

Hi,i have a problem.For some weeks my DHD makes some strange noises when i call someone and the battery has a low utilization level , it makes interference-like sounds when i play a game but when i close the game/app/internet or something else it stops and everything gets back to normal, i tried a few different ROM-s and kernels but no change so far not sure if its a sfotware problem or a hardware one. Any idea what the problem is and if so some advices would help. Cheers

you could even try a different RADIO :/

I will try these days .. But not sure if that is the problem

else? anyone? any solution?

Grady22 said:
else? anyone? any solution?
Click to expand...
Click to collapse
Try the latest radio, reflash it even you have it installed the latest one.

Insecret said:
Try the latest radio, reflash it even you have it installed the latest one.
Click to expand...
Click to collapse
Suggest me a good radio for Romania, Bucharest (Cosmote) .. I changed the radio a few times and was a small change for better ..
The sound comes from the rear speaker
My actual radio is 12.65.60.29P_26.14.04.28_M
My actual rom is Sabsa Prime V12
Actual Kernel ucxl-ace-2wcr
Signal Strength HSDPA -77 / -81 dBm 17 asu ... EDGE -67 / -71 dBm 23 asu

Related

calling sound problems

I'm having problems that others don't understand me after calling a few minutes (> 10minutes mostly).They hear sometimes only beep.beep.beep.(like signial loss).
This makes the phone actually useless.
Tried downgrading radio to 1.65 series? Some have reported that older radios sometimes work better on android than the latest.
zenity said:
Tried downgrading radio to 1.65 series? Some have reported that older radios sometimes work better on android than the latest.
Click to expand...
Click to collapse
Upgrading radio using nbh method on android ? (camera+power+reset): edit:yes
I also only have always 3 out of 4 signal bars (on both kaisers, everywere).
- Rename radio ROM to "KIASimg.nbh" and place in root of SD.
- Boot into bootloader mode by powering off phone then booting by pressing power and camera buttons at the same time.
- Follow prompts to flash the radio ROM and reboot.
I recommend using an SD that is empty or has been backed up.
mr_fosi said:
- Rename radio ROM to "KIASimg.nbh" and place in root of SD.
- Boot into bootloader mode by powering off phone then booting by pressing power and camera buttons at the same time.
- Follow prompts to flash the radio ROM and reboot.
I recommend using an SD that is empty or has been backed up.
Click to expand...
Click to collapse
Too late...already did it (got 2nd phone to try).
Did it work?
With 1.65 I stil haven't 4 bars of signal.
Anyone having full signal on android with any radio (that's maybe the issues causing this) ?
What about the "beep beep beep".
mr_fosi said:
What about the "beep beep beep".
Click to expand...
Click to collapse
Don't know, it's diffucult to test (need to talk for a while).
I've installed radio 1.58
no one gets 4 bars here?
Never had 4 bars on android, but what exactly does 4 bars mean?
Lets put it this way, it's a graphical representation of the received signal strength, ok, but what exactly is the scale, 0-100? 0-4? Db? It's just an indication, don't treat it as accurate in any way.
Where I work I am within 100M of a cell tower, and my signal meter never reads higher than 3 bars, on winmo it's 4, does this mean that using winmo means I receive a larger signal? I doubt it, I think it just means that the scale of measurement is different.
So don't worry about the signal meter.
zenity said:
Never had 4 bars on android, but what exactly does 4 bars mean?
Lets put it this way, it's a graphical representation of the received signal strength, ok, but what exactly is the scale, 0-100? 0-4? Db? It's just an indication, don't treat it as accurate in any way.
Where I work I am within 100M of a cell tower, and my signal meter never reads higher than 3 bars, on winmo it's 4, does this mean that using winmo means I receive a larger signal? I doubt it, I think it just means that the scale of measurement is different.
So don't worry about the signal meter.
Click to expand...
Click to collapse
thxs, what are your experiences when calling?
Is there a way to increase volume (market?)?
I've had no issues when calling, and for me volume is usually on the loud side, I normally have it set as low as possible, my radio is 1.70.xx from the latest htc stock rom.
I'm not sure that any problems you have with volume are software related, as far as my experience goes, speaker and headphone volume has always been rather high on Android.
I also had the beeps during a call the other day after installing Myn's Warm Eclair. It was the same sound you get when dialing a number using the on-screen dial pad but the beeps just came randomly whilst i was talking. The person on the other end of the phone couldn't hear it but i couldn't hear a word they were saying over the beeps. I need to play with it some more and see what was causing it.
robuser007 said:
no one gets 4 bars here?
Click to expand...
Click to collapse
not to brag...
but I almost always have full signal.
in android.
zenity said:
I've had no issues when calling, and for me volume is usually on the loud side, I normally have it set as low as possible, my radio is 1.70.xx from the latest htc stock rom.
I'm not sure that any problems you have with volume are software related, as far as my experience goes, speaker and headphone volume has always been rather high on Android.
Click to expand...
Click to collapse
I tried latest 1.70: sound volume is even less compared to 1.71
Anyway I've bought an HTC G1 (for 120eur= 140 dollar), I really need a good working phone that I can rely on (with android).
I've bought two kaisers in the past for 90eur each, I've learned a lot of android, but I want a build that I can use for a while.
Sometimes when I turn Bluetooth or wireless off/on I get less signial.

Fm radio does not work at all , only static

My problem is , that my FM Radio doesn't work....I GET ONLY STATIC i discovered that after few months, cause i never used, and without beingn a big issue is like a splinter in my mind, that is somethig on my phone that doesn't work
i've tried reverting phone to stock, 1.32, 1.72....almost every custom rom, Lee, Miui , Cyanogen..etc, changed RADIOS and headsets...but nothing seemed to work
well the next step is to revert-it to stock and send it to waranty...but from various reasons i'm very reluctant in doing that
so is there anyone who encountered the same problem ????
Do you have head phones plugged in? Sometimes they are used for antennas
Sent from my HERO200 using XDA App
Kaoshin said:
Do you have head phones plugged in? Sometimes they are used for antennas
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
WHAT DO YOU THINK....that i flashed diffret radios and ROMS....and i forgit too plug in the headsets ....and i said...i've tried diffrent headsets.....
anyway ..tnx for trying to help
Saluco said:
My problem is , that my FM Radio doesn't work....I GET ONLY STATIC i discovered that after few months, cause i never used, and without beingn a big issue is like a splinter in my mind, that is somethig on my phone that doesn't work
i've tried reverting phone to stock, 1.32, 1.72....almost every custom rom, Lee, Miui , Cyanogen..etc, changed RADIOS and headsets...but nothing seemed to work
well the next step is to revert-it to stock and send it to waranty...but from various reasons i'm very reluctant in doing that
so is there anyone who encountered the same problem ????
Click to expand...
Click to collapse
I've just remembered I've got some headphones in the drawer here at work, so I thought I'd give it a test for you - worked straight away mate!
First time I've even tried the radio, had to search for the app to turn it on Running ARHD 5.1.3 (until 5.1.4 gets released hopefully soon!)
Lanky Git said:
I've just remembered I've got some headphones in the drawer here at work, so I thought I'd give it a test for you - worked straight away mate!
First time I've even tried the radio, had to search for the app to turn it on Running ARHD 5.1.3 (until 5.1.4 gets released hopefully soon!)
Click to expand...
Click to collapse
thats exact how it hapends...i didnt evere tried ...but when i tried ups...ands its do no,, some how, annoyin, to know that i have a BUG
I'm sorry I can't remember the specifics of it, but I had this problem. It turned out it was a quirky fix. I think I had to plug in the headset, start the radio, then click menu > speaker, then menu > headset & it worked. I only had to do that the first time I used the radio in a particular ROM. That sequence has been talked about in another thread here. That's where I found it originally.
Saluco said:
My problem is , that my FM Radio doesn't work....I GET ONLY STATIC i discovered that after few months, cause i never used, and without beingn a big issue is like a splinter in my mind, that is somethig on my phone that doesn't work
i've tried reverting phone to stock, 1.32, 1.72....almost every custom rom, Lee, Miui , Cyanogen..etc, changed RADIOS and headsets...but nothing seemed to work
well the next step is to revert-it to stock and send it to waranty...but from various reasons i'm very reluctant in doing that
so is there anyone who encountered the same problem ????
Click to expand...
Click to collapse
Hi,
Yes I have the same issue mate,
just got the new HD (on net) and didn't test the radio prior to rooting and applying custom rom (coredroid).
did note the wireless was hopeless on the original rom prior to upgrade.
I opened Fm radio and scanned (as i have on my 3 other htcs in the family) and no channels are being picked up, changing locations, headsets etc no difference.
I have reflashed different radios, no diff
reflashed stock 2.2 flashed several radios and kernals, no diff
restored my custom image with recommended radio versions, no diff.
I have given up, it looks like its possibly a warranty issue, but i am reluctant to go through the BS just for the radio
Any fixes?
Col
any developers thoughts on this?
Col
how mines worked...use headphone as an antenna
Static reduction methods
did you try to use the headphone as an antenna? Raise the headphone higher make it act like an antenna, and put device/phone on speaker.
edit: and sometimes leave fm radio on and minimize it/push home button
It reduces the static for me.

[Q] Android Revolution HD™ 6.1.5 - BUGs

Hi guys,
I flashed the new 6.1.5 ver yesterday and today I found a few bugs.
- After restart in no WIFI area, battery status icon and CPU usage icon aren't loaded to the status panel.
- Not always 3G internet is connecting after WIFI disconnection.
- Can't Restart/TurnOff the phone after restart and no WIFI connection. The button is not responding to long press.
Only when i'm turning the WIFI i can restart or turn off the device and automataly battery and cpu status bar are loaded.
How can I fix it?
Im having the same problems too
I found something else, please see and tell if it's happening to you:
Evil_Zo said:
I think I've found a bug/problem in Android Revolution HD ROM (both versions 6.1.4 & 6.1.5). It has a sound issue. When a ringtone (or any sound from the speaker) finishes ringing, next thing is the speaker turning off after a second or so, and in that moment the speaker produces some crackle sound. I've flashed a CM 7.1 ROM after that and no issues there. After new flashing of ARHD, the problem is back again, so it's definitely ROM (or Kernel) related It's not loud, but sometimes it's very annoying.
Click to expand...
Click to collapse
vovak43r said:
Hi guys,
I flashed the new 6.1.5 ver yesterday and today I found a few bugs.
- After restart in no WIFI area, battery status icon and CPU usage icon aren't loaded to the status panel.
- Not always 3G internet is connecting after WIFI disconnection.
- Can't Restart/TurnOff the phone after restart and no WIFI connection. The button is not responding to long press.
Only when i'm turning the WIFI i can restart or turn off the device and automataly battery and cpu status bar are loaded.
How can I fix it?
Click to expand...
Click to collapse
I don't have none of these problems...
Sent from my refrigerator using Tapatalk
Evil_Zo said:
I think I've found a bug/problem in Android Revolution HD ROM (both versions 6.1.4 & 6.1.5). It has a sound issue. When a ringtone (or any sound from the speaker) finishes ringing, next thing is the speaker turning off after a second or so, and in that moment the speaker produces some crackle sound. I've flashed a CM 7.1 ROM after that and no issues there. After new flashing of ARHD, the problem is back again, so it's definitely ROM (or Kernel) related It's not loud, but sometimes it's very annoying.
Is it possible that I am the only one experiencing this?
Click to expand...
Click to collapse
Evil_Zo said:
I found something else, please see and tell if it's happening to you:
Click to expand...
Click to collapse
Seems to be kernel related.
Reports show that issue isn't there with kernel RCMIX_ACS_v8_OC_UV ..
Both NCR (= default ARHD) and 2WCR can be found here ..
Cheers,
---------- Post added at 02:03 AM ---------- Previous post was at 01:55 AM ----------
vovak43r said:
Hi guys,
I flashed the new 6.1.5 ver yesterday and today I found a few bugs.
- After restart in no WIFI area, battery status icon and CPU usage icon aren't loaded to the status panel.
- Not always 3G internet is connecting after WIFI disconnection.
- Can't Restart/TurnOff the phone after restart and no WIFI connection. The button is not responding to long press.
Only when i'm turning the WIFI i can restart or turn off the device and automataly battery and cpu status bar are loaded.
How can I fix it?
Click to expand...
Click to collapse
Devas4 said:
Im having the same problems too
Click to expand...
Click to collapse
Maybe try this:
Go to Menu - Settings - Security - Enable "Use secure credentials" and look for "clear all credentials" and clear it ..
Hope it helps...
Cheers,
Wacco001 said:
Seems to be kernel related.
Reports show that issue isn't there with kernel RCMIX_ACS_v8_OC_UV ..
Both NCR (= default ARHD) and 2WCR can be found here ..
Click to expand...
Click to collapse
I just flashed NCR V8 and it's still there It's a bit quieter but still present
Wacco001 said:
Seems to be kernel related.
Reports show that issue isn't there with kernel RCMIX_ACS_v8_OC_UV ..
Both NCR (= default ARHD) and 2WCR can be found here ..
Cheers,
Click to expand...
Click to collapse
Evil_Zo said:
I just flashed NCR V8 and it's still there It's a bit quieter but still present
Click to expand...
Click to collapse
You could try "lordmodNCTeam-4.0-CFS" kernel ... (can be found here ..)
I don't really have that sound issue, so can't help to much from own experience ..
Cheers,
It worked! Thank you very very very much!
Evil_Zo said:
It worked! Thank you very very very much!
Click to expand...
Click to collapse
Wow, i wasn't so patienced and flashed another rom because of the button bug.
I have the same Sound issue, i'll try to change the kernel. Thank you!!! I think i'll back to 6.1.5...
Sort of the same issues here:
- videos (divx) crackle and pop like old turntable records with Rockplayer
- restart/flightmode menu while holding power-button mostly doesn't appear anymore (if seen it last week once though).
- wifi connections/credentials had to be refreshed and/or my own accespoint had to be reset twice, it just stopped working (not givig IP first time, later just no internet traffic).
- the Ad-free/blocker doesn't work with Alarm Clock Plus
Only used AR so far, now considering different rom, don't wanna fiddle with kernels, 6.1.6 is probably round the corner, so that should have a proper kernel included. (considering the update rate, just last weeks I'v gone from 4.6? to 6.1.1-6.1.2-6.1.5 and it seems to get worse each time)
One thing I didn't do though, is update the radio, could that be the cause? The reason I update 4.6 was because the microphone reception was very bad, people almost couldn't hear me. 6.1.1 picked up incoming calls always on the speaker na the distortion in the video sound.
Hey,
i have some issues, too...
My Apps like CurrentWidget dont save their settings (only for some minutes). And every first APP Installation Ends in an Error "-110" (unknown error).
If try it once again it works...
Anybode an Idea?

[Q] the phone loses singnal sometimes

Sometimes the phone loses signal, the dbm goes to -113 and the asu to 0, it still shows im connected to a network.
It just shows 0 bars and i cant receive calls.
When i try to call the bars go back up, although i have to try and call again for it to make the call.
rom mildwild 3.3 oxy
custom hboot
Tried a few radios and it didnt help.
Is it a hardware issue?
Try if a ROM change solves the problem.
Sent from dGB using Transparent XDA App
Changed to oxygen, still the same.
I noticed that if i dont touch the phone and its on the table the signal is always good (shows in battery use).
Edit: Flashed oxygen and there was no reception for a few minutes, hit it a few times on the table and its back.
To bad my warranty expired.
Any way to fix by myself?
Oxygen is bad attempt because MildWild is based on it. I recomemnd to try a complete different ROM, e.g. ICS oder dGB.
Thing is i had oxygen for a while and didnt have that issue.
Hmm since i hit the phone it seems to work fine lol.
Edit: Losing signal again

Signal Issue

I have a strange problem.. I am getting full bars with my signal but still the battery stats is not showing that green colored line.
see the attachment. you will understand what I'm talking about.
with stock everything was fine except the battery was horrible but since i switched to custom roms and after flashing ARHD 7.2 rom, this issue has occured.
Not that it makes much of a difference but its weird.. and i am kinda scared if its some radio problem or something.. I switched to Renovate rom but still the issue is same. So is this something that i should be worried about?
signal strength -75dBm 19asu
anyone?
That's the same with my phone, I'm running ViperX Rom.
I know I've got good signal so it's nothing to be worried about
Sent from my HTC One X using XDA venom premium
I m on 7.2.1 and i confirm i have same bad signal and data connection drop
I was better on 7.1 ..

Categories

Resources