Hi Recently I wanted to run after installing a new rom the phone and instead of the expected effect of the phone vibrated 5-6 times, turn on the green light, the screen is black and nothing. After connecting to the PC starts to look for Qualcomm CDMA Technologies driver MSM but to no avail. POWER + VOL-does not work. Does anyone have any ideas? I would add that I took out the batteries for 10 minutes and put it back in and start up normally, I walked into 4ext and rom threw again, but the next day the problem returned. Removing the battery is no longer helps. Someone knows the solution?
Luniopl said:
Hi Recently I wanted to run after installing a new rom the phone and instead of the expected effect of the phone vibrated 5-6 times, turn on the green light, the screen is black and nothing. After connecting to the PC starts to look for Qualcomm CDMA Technologies driver MSM but to no avail. POWER + VOL-does not work. Does anyone have any ideas? I would add that I took out the batteries for 10 minutes and put it back in and start up normally, I walked into 4ext and rom threw again, but the next day the problem returned. Removing the battery is no longer helps. Someone knows the solution?
Click to expand...
Click to collapse
Post in the link in my Signature (Ace Think Tank). I've seen this problem before but I've never really learnt the solution. An awesome guy called Glevitan will probably help you
Related
I was updating my Dash the other day to Ookba's latest rom when I received an error message. It gave me instructions on how to fix it (loading it in bootloader etc.), and I received a message saying it was successful and the rom would continue updating. I received another error message saying the rom was corrupt, and the program shutdown. My phone will not power up now. It was at(or near) full charge while reflashing, but will not turn on regardless of the button combination I hold while attempting to power it on.
Any ideas? Thanks!
what rom did you attempt to load in the bootloader? it should have been the factory rom..if not, then that is probably the root of the problem....as far as it not powering on now...I leave that open to the forum...cuz' I have no relevant advice on that one....
when trying to do the gold card method to unbrick my phone, it say Invalid certificate ..? wats this and how to fix it.
I was trying the "[ROM][EXCA][WWE][* 3VOLUTION SERIES *][WM6.5 STD 21854][Build 3VO.3.00.112509]" when it locked up on me, and still hasn't been able to power up.
Today when plugging it in after a week of letting sit, a red led light showed where the normal orange/green led would normally light up when charging/charged. The light stayed on for a few seconds, then shut off. Nothing else though. Any other suggestions?
allthrottle said:
I was trying the "[ROM][EXCA][WWE][* 3VOLUTION SERIES *][WM6.5 STD 21854][Build 3VO.3.00.112509]" when it locked up on me, and still hasn't been able to power up.
Today when plugging it in after a week of letting sit, a red led light showed where the normal orange/green led would normally light up when charging/charged. The light stayed on for a few seconds, then shut off. Nothing else though. Any other suggestions?
Click to expand...
Click to collapse
Red light my friend means your battery is gone, probably your phone is not bricked maybe it just needs a battery replacement
I am having the same issue, except that I can place the battery in another Dash and it boots up just fine, so I am assuming it is not the battery. I will buy another one to double check. My problem is the same as which is stated above. Can anyone help? Thank you.
Just an update to see if I can get anymore suggestions. Hadn't touched the phone since the last post. Bought a new battery for it this weekend and it's still dead as ever. Won't boot at all. Not into bootloader, nothing. I get absolutely no response holding power+cam or softkeys+power.
Any advice? I don't absolutely need the phone as I've picked up a G1, but it would be nice to have this working, or at least trash it if it's junk.
Thanks!
Everyone else stumped too?
Have you connected to the wall charger to see if you get some response with your new battery?.
Just unbricked mine after being dropped again by the girlfriend. Try this, plus usb cable into device, press the camera button only. See if that gets you into the bootloader screen. If so, flash the oem build and go from there.
Tried it plugged into a wall charger for 3-4 hours, car charger for another hour, and computer/usb for another hour. No response anytime.
I'll try the camera only method when I get home later.
Thanks!
Just tried plugging it into the computer and holding only the camera. Didn't work. Tried that, tried holding power+cam, power+soft keys etc.. What's weird is I had the battery cover off while doing this, and the battery slipped out while I was holding cam+pwr, it actually loaded into the multicolor(bootloader?) screen twice, but would shutoff within a few seconds. Now I'm back to no response from it.
Finally got it to stay on the boot screen without turning off, but can't get it to establish an activesync with the computer so I can't flash it. The computer is obviously detecting it though, because I see an icon that says "remove smartphone usb sync".
The phone's FINALLY working again! Thanks again guys! I was a couple of days away from junking the thing! I couldn't get Ookba's rom to flash it, so I went back to the unbricking tutorial and saw that he recommended grabbing the factory rom to flash it. I did, it worked, and I just flashed it again using Ookba's rom.
Took quite a few months, but it's back! Thanks!
Hello, i bought an older desire, installed cyanogenmod 7 on it and all was running ok for ~4 days.
2 hours ago i left the phone on the table, battery was around 70%, when i came back screen was blank and i was unable to turn it on or restart it. I pulled out the battery and then inserted it back, after turning on the screen is blank and the phone permanently vibrates.
i have tried common key combinations mentioned on forums (vol - + power, back + power, vol - + power + home) with no change, the screen remains blank and the phone constantly vibrates.
i have tried to connect it to pc and to boot into recovery blindly, adb / fastboot doesnt list it after any of the key combinations, lsusb also doesnt list it, it only drains some power from usb.
I would like to know what happened, i would have understood if something like that had happened while i was flashing it / rebooting it after flashing, but it ran just fine for over 4 days. Now i have a nice usb powered vibrator :]
Would anyone care to help me with my issue? It doesnt seem to be covered anywhere on the forums. I am an android newbie but i can test probably any idea you may give me. Many thanks.
Very strange...
Try to remove the SD and the SIM to discard them as the problem.
Good luck
i have already tried that. and i have tried all combinations of sim / no sim, sd / no sd.
no effect.
i have got the same problem!!!
i've tried to root my desire following the instructions from internet, maybe i did something wrong. after i running bootloader from hdbootscreen it run in cmd window from pc the moment later it automatic shutdown the screen to black but the phone system was seem still work. ive tried to remove battery SIM SD card and reboot by combined button like instructions but nothing above screen, just stayed black screen, but my phone vibrated when i try to push power on
i hope anyone can helps us, ive just bought it 2day ago.
thank in advancej
Hey mate
I gave my old desire phone to my dad to use and I got that problem. According to him, he turned the phone off to charge and when he turned it on it just constantly vibrated.
Kinda puzzled me at first, I pulled the battery, sim and SD out but didn't fix it. Found my other genuine spare battery for it and put it in, I let it charged for a bit and turned it on.
Phone's now working with the other battery, I think I eliminated the problem but I'll have to hear back from my dad to see if he encounters the problem again.
Hope that helps you mate
Hi i know there are threads on this and ive read countless ones. i installed BlackZax'7 [The Next Level Begin] on my LT28AT running LT28H LT28h_6.2.B.0.211. everything was working fine after first reboot. call texts 4g lte everything was perfect i was extremely satisfied. then restarted once all my apps were downloaded and went to put cwm recover on it and boom i got bootloop.
Naturally i headed to the forums here on XDA to follow the tutorial to recover from bricked state. what happened was i got bootloop and held Power and Volume + to reset to go to download mode, felt 3 vibrations which from my understanding was a hard reset. i followed the tutorial which said to leave it plugged in until solid red light turns green. well when i plug it in i get the solid red light however no green led. every once and a while ill see the sony logo and starts to bootloop. held volume down to try to get to download mode but refuses to do soo........
after a while bootloop stops and goes to solid red led.....and repeats the same process after a while.
what do i do ive searched forums and some have said to take the battery out however unfortunately i dont own the right tool to get the plating off after the cover.
what should i do its my only phone.......
Any help or a way to fic would be life saving
Same problem here
Hello,
I have recently stumbled upon the same problem and am completely clueless of what to do.....did you find a solution for this without disassembly?
I think what makes sense is to let the phone sit for a couple of days till the battery drains out and to put on the charger then for a couple of days......
please do reply.
Thanks.
Haider4711 said:
Hello,
I have recently stumbled upon the same problem and am completely clueless of what to do.....did you find a solution for this without disassembly?
I think what makes sense is to let the phone sit for a couple of days till the battery drains out and to put on the charger then for a couple of days......
please do reply.
Thanks.
Click to expand...
Click to collapse
Yea I fixed it. What You have to do is let it die then have flashtool ready connect to pc to charge use a rubber band or hair tie to hold the volume down button pressed (You have to have pressed before the Sony logo appears the first time or you have to start over) if it works then you will come back to a fixed phone.
*you have to flash before first bootloop*
I used a hair tie to keep the volume down button pressed had flashtool waiting for download mode plugged into the pc to charge then after about 1-2 hours I saw my phone boot up. It takes time and patience but the rubber band trick worked like a charm
elowe21 said:
Yea I fixed it. What You have to do is let it die then have flashtool ready connect to pc to charge use a rubber band or hair tie to hold the volume down button pressed (You have to have pressed before the Sony logo appears the first time or you have to start over) if it works then you will come back to a fixed phone.
*you have to flash before first bootloop*
I used a hair tie to keep the volume down button pressed had flashtool waiting for download mode plugged into the pc to charge then after about 1-2 hours I saw my phone boot up. It takes time and patience but the rubber band trick worked like a charm
Click to expand...
Click to collapse
How long does it take to tie?....i left it sitting for about 30 hours i dont think the battery died completely because i tried flashing the tft with flashtool tying a piece of string on the volume down key,but it was boot looping again!
how long should i leave it for the battery to die....it took only 10 minutes for the mobile to charge after the 30 hrs period and it started boot looping without entring flash mode.....i even tried to flash a kernel through fastboot....no use...boot looping!!
PLEASE HELP!!!
You need to read the forum with more attention: it is all written up...
Start your flashtool and pick stock rom. Let the program unzip the files. When you get pop up to connect the phone, connect your fully disharged phone and leave it alone. It will start flashing automatically in about 15 min.
Hey guys
I have obviously an HTC One X, that started freezing all of a sudden and stopped charging, it even froze in the bootloader menu, then the screen turned off and I don't know what exactly the problem is, I tried everything I saw in every google page I found, and nothing helped, I took it to HTC and they had their all time favorite answer: "you have to change the motherboard", I am still not convinced of that.
anyway, that's not why I am here, the details are, the phone is not rooted, in the same state as when I got it, but with the last stock update that they released, when I connect it to the pc, the pc makes a sound and says that device is not recognized, until couple of minutes ago when I connected it, it's showing in device manager as APX, that's why I am posting.....
the screen is off,and I don't know even if the phone is off or on, and no led indicator that it's charging...
is there a possibility to fix it or is it gone for good?
before I go, yes I tried turning it off and on and every possible combination out there, under a bright light, in the fridge(kidding) still the same thing, but when I press the power button for more than 10 seconds while connected to pc, the pc makes disconnect/connect sound.
thanks for the help and sorry for the long talk.
labibismaiel said:
Hey guys
I have obviously an HTC One X, that started freezing all of a sudden and stopped charging, it even froze in the bootloader menu, then the screen turned off and I don't know what exactly the problem is, I tried everything I saw in every google page I found, and nothing helped, I took it to HTC and they had their all time favorite answer: "you have to change the motherboard", I am still not convinced of that.
anyway, that's not why I am here, the details are, the phone is not rooted, in the same state as when I got it, but with the last stock update that they released, when I connect it to the pc, the pc makes a sound and says that device is not recognized, until couple of minutes ago when I connected it, it's showing in device manager as APX, that's why I am posting.....
the screen is off,and I don't know even if the phone is off or on, and no led indicator that it's charging...
is there a possibility to fix it or is it gone for good?
before I go, yes I tried turning it off and on and every possible combination out there, under a bright light, in the fridge(kidding) still the same thing, but when I press the power button for more than 10 seconds while connected to pc, the pc makes disconnect/connect sound.
thanks for the help and sorry for the long talk.
Click to expand...
Click to collapse
APX=DEAD HOX only chnage mainboard.
yep only changed mainboard can solve it ^^ no way to get it working back...
I have an idol 4s and last night before bed, around 11:30pm, it decided it was a good time to windows update. I looked over and I saw the reboot and the gear icon, so although I knew I had about 50% battery I plugged it in and continued to read my book while waiting for it to finish.... except after the progress bar got to the end my phone never turned back on.
Despite several attempts at holding the power button to get it to come on, or plugging and unpluggin the power , all I get is the White Alcatel Idol4S boot screen, followed by the pink TMobile Logo.
Then, coincidentally as I'm writing this I plug it in again (coincidentally into my pc at work if that makes any difference) and it finally gets passed the windows logo and it shows the message at the top something about finishing up or whatever.
But as I recall, this happened on the last update, whenever that was too. Any idea what the heck is going on? Has this happened to anyone else?
RobbieRobski said:
I have an idol 4s and last night before bed, around 11:30pm, it decided it was a good time to windows update. I looked over and I saw the reboot and the gear icon, so although I knew I had about 50% battery I plugged it in and continued to read my book while waiting for it to finish.... except after the progress bar got to the end my phone never turned back on.
Despite several attempts at holding the power button to get it to come on, or plugging and unpluggin the power , all I get is the White Alcatel Idol4S boot screen, followed by the pink TMobile Logo.
Then, coincidentally as I'm writing this I plug it in again (coincidentally into my pc at work if that makes any difference) and it finally gets passed the windows logo and it shows the message at the top something about finishing up or whatever.
But as I recall, this happened on the last update, whenever that was too. Any idea what the heck is going on? Has this happened to anyone else?
Click to expand...
Click to collapse
I cannot tell much from what you are describing, but my best advice is to let it do what it needs to do and finish.
Just plug it in and leave it alone. Possibly you interrupted the update/upgrade process, but who knows? Unless it hangs there for hours and hours I try to never touch my windows phones to force a soft reset unless I absolutely have to.
Yeah, so it happened again last night. Just as I was going to bed, I saw the black and white screen with the gears rotating, so I just plugged the phone into power and went to bed... but making sure to turn on my other device so I'd atleast have an alarm to wake up to. 8 hours later nothing. If I plug in power or unplug power, I'll see the tmobile splash screen and then nothing else.
[edit] Not sure how relevant this is. But when I plug it in to power. The white led near the camera turns on as usual. But after a while it turns off, which leads me to believe that the device is literally turned off because as I recall, genreally speaking, it is not possible to plug in a windows phone device and not have it charge. What makes it interesting though is that even though the led is turned off, I still see the device in "This PC" when it is connected. I just can't browse the device storage of course. So as soon as I disconnect, it is not visible on my windows 10 pc until I plug it in again. I finally long pressed the power button, and unlike earlier when I would just remove and reconnect usb power, this time, the White Alcatel/windows 10 branding showed up, THEN the pink tmobile logo. And finally it booted up.
Mine's been doing the same since the start of the year... I have to keep rebooting till it finally "works" again... takes about 45-60mins of rebooting.