As the title says I (like some other users) have been experiencing a lot of issues while trying to install any ROM that uses any version of AROMA installer on my N7100.
I googled the issue and i did look here for a solution but unfortunately without any luck... if this problem has been solved in some other threads i didn't find, I'm sorry for my incompetence and you can delete this thread.
If anyone still have this issue could be happy to know I solved it by flashing TWRP recovery 2.3.2.3, I've been putting my trust in clockworkmod recovery since i switched to android powered devices but for now this is the only solution i found to the problem.
thank you for your time and patience, hope I'v been useful to someody.
sabnack said:
As the title says I (like some other users) have been experiencing a lot of issues while trying to install any ROM that uses any version of AROMA installer on my N7100.
I googled the issue and i did look here for a solution but unfortunately without any luck... if this problem has been solved in some other threads i didn't find, I'm sorry for my incompetence and you can delete this thread.
If anyone still have this issue could be happy to know I solved it by flashing TWRP recovery 2.3.2.3, I've been putting my trust in clockworkmod recovery since i switched to android powered devices but for now this is the only solution i found to the problem.
thank you for your time and patience, hope I'v been useful to someody.
Click to expand...
Click to collapse
AROMA works great with CWM 6.0.15 and freeze with CWM above 6.0.15
If you got freeze in Aroma you have to wipe cache and dalvik cache,full wipe then format system and you got no freeze in aroma.
Sory for my english.
ohtoulouz said:
AROMA works great with CWM 6.0.15 and freeze with CWM above 6.0.15
Click to expand...
Click to collapse
I didn't try with that version of CWM thanks for the advice, I'll try when i get the chance
adinfsfocus said:
If you got freeze in Aroma you have to wipe cache and dalvik cache,full wipe then format system and you got no freeze in aroma.
Click to expand...
Click to collapse
unfortunately i tried this with no luck... thanks anyway for your help.
I'm sorry for the OT but could anyone adress me to any thread or solution for the "mount and storage" issue ? it doesn't work with any recovery thanks
Sorry for a lazy noobish question, but i really didn't understand how performe a TWRP installation. Does anybody can tell me or address a usefull link?
Thanks
pirata****zu said:
Sorry for a lazy noobish question, but i really didn't understand how performe a TWRP installation. Does anybody can tell me or address a usefull link?
Thanks
Click to expand...
Click to collapse
you can use mobile odin to flash any zip or tar you wish to flash on device
you can also flash the zip from any recovery menu
pirata****zu said:
Sorry for a lazy noobish question, but i really didn't understand how performe a TWRP installation. Does anybody can tell me or address a usefull link?
Thanks
Click to expand...
Click to collapse
Android purists can think what they like, but the easiest way would be to use GNote 2 Toolkit by MSkip. Makes installation of TWRP/ CWM a breeze
twrp aroma
i have twrp, but ive heard you cant flash a aroma installer on twrp only on cwm is this true?
I had the same issue until reverting to 6.0.1.5. Since then I'm using PhilZ modified CWM and it works perfectly.
Sent from my GT-N7100 using xda app-developers app
Thanks
Thank you for the work.
Personnally i had to install using Team Win Recovery.
Recovery ClockWorkMod 6.0.1.9 made Aroma Installer Freeze...
i have the same problem, i wanted to reflash dr ketan's rom, im using CWM 6.0.4.7 and Phliz Touch 6.19.2, i've found out i have no backup, and aroma freezes during random moments of installation.. that was the first time i flashed something by myself, went great, for some reason i tried to change kernel, and now i can't use my phone.. i would appreciate your help guys so much,
//
edit: i've flashed twrp, and installation went flawlessly, i think i accidently deleted some CWM backup files, with aroma files being in folder.
This worked for me after days of trying
I found and Older version of Philz touch Recovery ( Version 5 ) and flashed it with Odin. My galaxy note 2 N7100 was earlier on Philz 6. now it says Philz touch recover 5. Flashed the Pheonix V17 form SD card without any hang ups this time and now works like a charm. It did not freeze even once. Donno this works on all occations.
Samsung Galaxy Note 2 N7100XXUENA1
Related
Rom Manager doesn't seem to know that I've got CWM installed. When I rooted and installed CWM I didn't do it through Rom Manager originally. Now CWM won't let me use it to manage my backups and keeps asking me if I want to install CWM? I've got Google Wallet installed so I'm a little nervous flashing things needlessly.
Any suggestions?
Thanks
edit: CWM v5.5.0.4
do you try "wipe cache" and "advanced->wipe dalvik cache?"
Thanks, I just tried, it took quite a while to clear the cache. When I booted up it went through a whole Optimizing Apps process, I'm not sure if that was due to wiping the dalvik cache? But it still didn't fix the Rom Manager issue.
Its probably not yet compatible if you have the touch version of cwm installed, so it wants to flash the standard one. Or you could always just let rom manager just reflash cwm overtop and then you may be good to go.
EvanVanVan said:
Rom Manager doesn't seem to know that I've got CWM installed. When I rooted and installed CWM I didn't do it through Rom Manager originally. Now CWM won't let me use it to manage my backups and keeps asking me if I want to install CWM? I've got Google Wallet installed so I'm a little nervous flashing things needlessly.
Any suggestions?
Thanks
Click to expand...
Click to collapse
Maybe it can't detect it? I know we had to set which CWM version we had installed on the SGS.
Maybe try to run the install?
Sent from my Galaxy Nexus using Tapatalk
I don't have the touch version installed (doesn't seem to be the touch version anyway). I should have said this in the first post but it CWM v5.5.0.4.
Herman76 said:
Maybe it can't detect it? I know we had to set which CWM version we had installed on the SGS.
Maybe try to run the install?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Flashing CWM over CWM shouldn't wipe my phone right? It's only the stock bootloader that requires a full wipe?
I installed ROM manager and then CWM via ROM manager last night and its CWM v5.5.0.2 which ROM manager thinks is the latest: perhaps it can't deal with 5.5.0.4 yet...
Clancy_s said:
I installed ROM manager and then CWM via ROM manager last night and its CWM v5.5.0.2 which ROM manager thinks is the latest: perhaps it can't deal with 5.5.0.4 yet...
Click to expand...
Click to collapse
ah, that would probably do it...guess i'll just wait it out a little longer, thanks
I have the exact same issue as this Rom Manager refuses to see I have CWM installed so just keeps telling me I need to install it it also can't download and flash its own version and just freezes after download
So any updates on this or more users experiencing it ?
I think I've found the solution. In ROM Manager tap the menu button at the top and then tap Manual Flash Override. Next it'll ask you if you've flashed CWM manually so tap OK because that's what we've done. Next pick which GN you have and then choose CWM 3.x+. There you have it, it should work now.
Don't use ROM Manager - problem solved!!
Seriously, though, it's a TERRIBLE piece of software
I'm fairly new to using it but it seems decent, why is it so terrible? I had an eris before this and did everything manually through recovery, this seems like it's a lot better than that.
It's just more trouble than it's worth. Why not just manually flash CWM using fastboot and get your head around that as opposed to an app which can - frankly - break things?
Flashing it via fastboot is what causes the above issue. Since you flash it manually rom manager can't see it, that's why I posted the above steps to kind of "force" rom manager to see the manually installed version.
But if you're not using ROM Manager then what's the issue? Copy ROM to SD card, reboot to recovery, flash ROM...where is ROM Manager needed in that equation?
If you're not using it then there is no issue, but this thread isn't about using it or not, it's about getting it to work with the galaxy nexus when you manually flash CWM.
I like it for the backup and restore feature and being able to change the names used to backup
all,
I am using TWRP 2.5.0.0 yet i keep getting the boot loop. tried wiping multiple times. any ideas how to resolve this?
go into the thread TWRP and there they will explain how to get out of that problem the newest version had a bug with it so they made a flashable zip that will get you out the boot loop hope that helped http://forum.xda-developers.com/showthread.php?t=1768742 go there and start from like page 70 or so and you will get it
krazierokz said:
go into the thread TWRP and there they will explain how to get out of that problem the newest version had a bug with it so they made a flashable zip that will get you out the boot loop hope that helped http://forum.xda-developers.com/showthread.php?t=1768742 go there and start from like page 70 or so and you will get it
Click to expand...
Click to collapse
before updating i also tried 2.4.3.0. and had the same issue
technojinn said:
before updating i also tried 2.4.3.0. and had the same issue
Click to expand...
Click to collapse
i will try again
sometimes older recoveries behave different than others but i dont use TWRP so im not to familiar with it i stick with the tried and true if it aint broke dont fix it type of guy lol but when flashing that rom what rom was you on and how many times have you flashed before ? was you already rooted when you flashed that or did you do it through odin what were youre steps
technojinn said:
all,
I am using TWRP 2.5.0.0 yet i keep getting the boot loop. tried wiping multiple times. any ideas how to resolve this?
Click to expand...
Click to collapse
i'm using twrp 2.2.2.0, which is an older version, but it works just fine. i installed JMT JB 1.1 yesterday. didn't have any problem.
boot loop
ntdatter said:
i'm using twrp 2.2.2.0, which is an older version, but it works just fine. i installed JMT JB 1.1 yesterday. didn't have any problem.
Click to expand...
Click to collapse
i used clockwork mod to install Jedi Mind Trick Jelly Bean ROM and I'm in a boot loop. Can someone help please?
---------- Post added at 03:40 PM ---------- Previous post was at 03:17 PM ----------
rvmehta said:
i used clockwork mod to install Jedi Mind Trick Jelly Bean ROM and I'm in a boot loop. Can someone help please?
Click to expand...
Click to collapse
nevermind - fixed it by installing a newest version of clockwork mod and redoing the install.
Please remember with the newest TMo 4.1.2 base there is a preload partition that is wiped when you wipe cache/dalvik. You WILL bootloop without preload. Jamison has modified the old TDJ wipe scripts to add preload back in and I recommend using those instead of wiping from recovery. They can be found in his Infamous 4.1.2 ROM thread in development.
Can't enter recovery after restore, following bootloop
Hi Everyone,
I was running CM 10.1.2 and wanted to flash Jedi Mind Trick v6. Followed instructions to flash Darkside Super Wipe, then ROM, then Darkside cache wipe. Phone began to bootloop after showing the Deviant Developer boot image. I tried to do a full wipe with CWM recovery but it kept freezing on the cache wipe. When that failed I successfully restored a backup (AOKP JB-mr1_build-6) but was still experiencing a freeze with CWM anytime I tried to wipe. I thought that it might help to install TWRP so I installed goomanager and successfully installed the recovery from there but now I can't get into recovery at all (neither from CWM nor from TWRP). The AOKP is still working as well as it ever did but I'd like to reboot into recovery somehow and maybe even finish flashing Jedi Mind Trick v6. Does anyone have any idea what I may have done wrong here? I'm a relative noob and this is my first post so your patience is much appreciated. Thank you very much for any insight you might provide!
sleepingcrow123 said:
Hi Everyone,
I was running CM 10.1.2 and wanted to flash Jedi Mind Trick v6. Followed instructions to flash Darkside Super Wipe, then ROM, then Darkside cache wipe. Phone began to bootloop after showing the Deviant Developer boot image. I tried to do a full wipe with CWM recovery but it kept freezing on the cache wipe. When that failed I successfully restored a backup (AOKP JB-mr1_build-6) but was still experiencing a freeze with CWM anytime I tried to wipe. I thought that it might help to install TWRP so I installed goomanager and successfully installed the recovery from there but now I can't get into recovery at all (neither from CWM nor from TWRP). The AOKP is still working as well as it ever did but I'd like to reboot into recovery somehow and maybe even finish flashing Jedi Mind Trick v6. Does anyone have any idea what I may have done wrong here? I'm a relative noob and this is my first post so your patience is much appreciated. Thank you very much for any insight you might provide!
Click to expand...
Click to collapse
1) You used Darkside wipe with a version of CWM other than 5.xx.
2) You used Goo Manager.
Those are your problems. You need to Odin a recovery to fix it.
You can find a TWRP tar file here:
http://techerrata.com/browse/twrp2/hercules
Get rid of Goo and Darkside.
So I just an hour ago booted my phone and used FreeGee to unlock the bootloader and install ClockworkRecovery. I factory reset, cleared the cache and the Dalvik cache, and flashed the latest stable Cyanogenmod no problem. Ever since then, however, my phone will only boot into Clockwork, and not a single thing I do is helping. Is there anyone here who can help me with this?
Altamont_Wolfe said:
So I just an hour ago booted my phone and used FreeGee to unlock the bootloader and install ClockworkRecovery. I factory reset, cleared the cache and the Dalvik cache, and flashed the latest stable Cyanogenmod no problem. Ever since then, however, my phone will only boot into Clockwork, and not a single thing I do is helping. Is there anyone here who can help me with this?
Click to expand...
Click to collapse
Try this. Not sure if this is the same situation
http://forum.xda-developers.com/showthread.php?t=2523807&page=2
Check all of the threads but their unique solution is on the last post.
im having this problem too except im on Phill's recovery. @jimi_pooh thanks for the help but it's kind of vague. Im still confused on what the fix is. Is their a flashable cwm or twrp? I cannot find Madmack's hacked twrp either.
Altamont_Wolfe said:
So I just an hour ago booted my phone and used FreeGee to unlock the bootloader and install ClockworkRecovery. I factory reset, cleared the cache and the Dalvik cache, and flashed the latest stable Cyanogenmod no problem. Ever since then, however, my phone will only boot into Clockwork, and not a single thing I do is helping. Is there anyone here who can help me with this?
Click to expand...
Click to collapse
which version of CWM do you ave?
bor3d2damax said:
im having this problem too except im on Phill's recovery. @jimi_pooh thanks for the help but it's kind of vague. Im still confused on what the fix is. Is their a flashable cwm or twrp? I cannot find Madmack's hacked twrp either.
Click to expand...
Click to collapse
I'm on Philz too but not the updated one. That one seems to be having problems. I also see Esimon311 helped you out. Did that work? If not try using the first version of Philz recovery assuming you already had a lokied version of CWM running before this happened. It can be found in the General Section. The information I posted before was for ADB commands. I would not suggest that if you are not familiar with ADB.
jimi_pooh said:
I'm on Philz too but not the updated one. That one seems to be having problems. I also see Esimon311 helped you out. Did that work? If not try using the first version of Philz recovery assuming you already had a lokied version of CWM running before this happened. It can be found in the General Section. The information I posted before was for ADB commands. I would not suggest that if you are not familiar with ADB.
Click to expand...
Click to collapse
I was able to fix it. I found a download to madmack's hacked recovery and flashed beanstalk. Booted perfectly!
Sent from my LG-E980 using XDA Premium 4 mobile app
Hello!
I recently got a Note 2 (GT-N7105)
And for some silly reason wich even disappoints myself i wanted to overclock , well that didn't make sense i know but however i did it! and directly after i installed the required file (I don't remember wich one but it was for 1.8Ghz) after the installing my phone kept showing the boot logo , i tried to use my backup but even after restoring it didnt boot! I cleaned everything wich also cleaned my backup...
I been on it for about 7 hours now trying different roms , kernels , and every file i could find but nothing helps.
I now installed Cyanogenmod using CMW but even that bootloops.
The last thing i could notice is CMW showing me a E: failed to Mount /efs (Invalid argument) Wich makes me worry even more...
I honestly hope there are some good peaple who could help me with this... Finally got a great phone and by stupid mistakes i made it won't work anymore..
I don't care what rom gets on it , Even if its a hello kitty rom u won't hear me complain , If the phone works again i'll be happy!
Not sure if this helps but its a GT-N7105 , i know it had the newest android there was (4. something, i think it was 4.3)
Odin does see the device , My CMW (6.0.4.1) works and Download Mode works.
I hope anybody can help me!
In case you want to help me live wich would be awesome my skype is : chrishendriks92
If it gets fixed i will Offcourse place the solution here.
(The note is not a new one , its used and a few months old , worked 100% before my stupid decisions bricked it)
(so here's a small version)
-Every rom i tried will bootloop , It shows a different boot video/logo everytime tho
-It all happened after i tried a 2.8Ghz Overclock
-i get a EFS error in CMW
-Accidentily i deleted my backup but i don't mind whatever rom gets on it
-Download mode and CMW (6.0.4.1) works
dodemans said:
Hello!
I recently got a Note 2 (GT-N7105)
And for some silly reason wich even disappoints myself i wanted to overclock , well that didn't make sense i know but however i did it! and directly after i installed the required file (I don't remember wich one but it was for 1.8Ghz) after the installing my phone kept showing the boot logo , i tried to use my backup but even after restoring it didnt boot! I cleaned everything wich also cleaned my backup...
I been on it for about 7 hours now trying different roms , kernels , and every file i could find but nothing helps.
I now installed Cyanogenmod using CMW but even that bootloops.
The last thing i could notice is CMW showing me a E: failed to Mount /efs (Invalid argument) Wich makes me worry even more...
I honestly hope there are some good peaple who could help me with this... Finally got a great phone and by stupid mistakes i made it won't work anymore..
I don't care what rom gets on it , Even if its a hello kitty rom u won't hear me complain , If the phone works again i'll be happy!
Not sure if this helps but its a GT-N7105 , i know it had the newest android there was (4. something, i think it was 4.3)
Odin does see the device , My CMW (6.0.4.1) works and Download Mode works.
I hope anybody can help me!
In case you want to help me live wich would be awesome my skype is : chrishendriks92
If it gets fixed i will Offcourse place the solution here.
(The note is not a new one , its used and a few months old , worked 100% before my stupid decisions bricked it)
(so here's a small version)
-Every rom i tried will bootloop , It shows a different boot video/logo everytime tho
-It all happened after i tried a 2.8Ghz Overclock
-i get a EFS error in CMW
-Accidentily i deleted my backup but i don't mind whatever rom gets on it
-Download mode and CMW (6.0.4.1) works
Click to expand...
Click to collapse
Ok, so what I would do.
I would wipe data through CWM.
Download official ROM from sammobile.com and flash it through Odin.
I hope this will help to get the phone booted.
After that we will worry about imei recovery.
dzejju said:
Ok, so what I would do.
I would wipe data through CWM.
Download official ROM from ... and flash it through Odin.
I hope this will help to get the phone booted.
After that we will worry about imei recovery.
Click to expand...
Click to collapse
Thank you for your reply:good:
I'm downloading it , looks like its going to take a while so i'll let you know!
Try mskips toolkit from skipsoft.net. It has a recovery package that should do the trick. There is a thread on it on here but i think it's closed due to Microsoft signature issues
Sent from my GT-N7105 using XDA Premium 4 mobile app
I'm afraid downloading/Flashing the rom didnt work.
ill get the T-Mobile screen , and then the samsung logo where it gets stuck , the install was completed tho so no errors whatsoever
This is a picture link s30.postimg.org/8l0bgrxa8/image.jpg
Would be amazing if you could help me out with this because i can't choose ''Option 2'' right picture , it just won't take it.
I can install teamviewer or whatever programm you want
I have the same problem, I'm on 4.3 version and tried to downgrade to 4.1.1 and went back to 4.3, I formatted the system through twrp with NO OS INSTALLED to be sure it is totally cleaned but all the way, I still experiencing reboot issue.
At first I encountered unfortunately systemui has stopped, done rooting and fixing permission but still no luck.
One more thing, I already flashed pit file.
.
(Update , I tried anything i could but it didnt work out , its going to Samsung Support)
cz4r3n said:
I have the same problem, I'm on 4.3 version and tried to downgrade to 4.1.1 and went back to 4.3, I formatted the system through twrp with NO OS INSTALLED to be sure it is totally cleaned but all the way, I still experiencing reboot issue.
At first I encountered unfortunately systemui has stopped, done rooting and fixing permission but still no luck.
One more thing, I already flashed pit file.
Click to expand...
Click to collapse
Flash right bootloader, then install fresh rom. Should be good to go.
Mufrad said:
Flash right bootloader, then install fresh rom. Should be good to go.
Click to expand...
Click to collapse
the problem persist.I flashed different bootloader already
cz4r3n said:
the problem persist.I flashed different bootloader already
Click to expand...
Click to collapse
You installed a kernel right? To over clock? First flash new bootloader, then flash stock kernel, then again flash stock rom, do not let the device boot up before you have done all three.
--------------------------------------------
_________________________
Mufrad said:
You installed a kernel right? To over clock? First flash new bootloader, then flash stock kernel, then again flash stock rom, do not let the device boot up before you have done all three.
Click to expand...
Click to collapse
I tried Agni pure kernel and followed your instructions but no avail,I think there is problem with the board,because when I wipe, the SuperSu also erased.
cz4r3n said:
I tried Agni pure kernel and followed your instructions but no avail,I think there is problem with the board,because when I wipe, the SuperSu also erased.
Click to expand...
Click to collapse
I said to install stock kernel not custom kernel, and after wipe when you install stock rom you will loose root and also loose all data and apps from previous rom anyway.
Mufrad said:
I said to install stock kernel not custom kernel, and after wipe when you install stock rom you will loose root and also loose all data and apps from previous rom anyway.
Click to expand...
Click to collapse
yup I already did that,I flashed stock kernel from http://opensource.samsung.com/.I know reflashing stock rom will delete everything including root.
What I mean is when Im rooted and tried to wipe the phone, SuperSu also deleted.Im wondering that I have a corrupted emmc, It seems that it is not mounted correctly, although I tried to flash a pit file already.
cz4r3n said:
yup I already did that,I flashed stock kernel from http://opensource.samsung.com/.I know reflashing stock rom will delete everything including root.
What I mean is when Im rooted and tried to wipe the phone, SuperSu also deleted.Im wondering that I have a corrupted emmc, It seems that it is not mounted correctly, although I tried to flash a pit file already.
Click to expand...
Click to collapse
What method did you use to root and inject supersu?
Mufrad said:
What method did you use to root and inject supersu?
Click to expand...
Click to collapse
The so called SAFEROOT
And I even tried the CF ROOT by Chainfire
butmena said:
--------------------------------------------
_________________________
Click to expand...
Click to collapse
? What!
Sent from my GT-N7100 using XDA Premium 4 mobile app
Hello. I tried to root my Samsung Galaxy Tab 3 - T210 and i think i really screwed it up. I did not make any backup, that was mistake NR one.
I got clock work mode up and running but i cant install any ROM, have tried The original Firmware, RocketTab, Cyanogenmod and cant pass the installation process and i think i cant turn back cause i got no backup and no way to install it again.
When i run any of these ROMs i get this error :
format() expects 4 args, got 5
Click to expand...
Click to collapse
No matter what i do, im a a bit scared know cause i think i am really close on destroying the tablet.
Can any one help me ? give me tips ?
CWM that i am running is : T210_CWM.6.0.4.7.recovery that i downloaded frome the XDA forum.
A,
panic solves nothing.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
when in doubt choose the most recent. zip or tar for odin.
for a rom i suggest svelte to get things straight.
then go from there.
m
1
Thank you for a quick answer, so i should change out CWM for Philz Touch ?
What is "Svelte" ? have no clue what that means.
What to have 110% solid answer before i go wreck some thing more.
Ah, of course.
Audriuss95 said:
Thank you for a quick answer, so i should change out CWM for Philz Touch ?
What is "Svelte" ? have no clue what that means.
What to have 110% solid answer before i go wreck some thing more.
Click to expand...
Click to collapse
I hear you, okay,
svelte rom thread - http://forum.xda-developers.com/showthread.php?t=2722582
great rom, minimal issues. philz advanced recovery is cwm with a good touch interface and more and very helpful options.
So yes, switch. All else is almost always solveable as long as your recovery is solid.
m
1
moonbutt74 said:
A,
panic solves nothing.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
when in doubt choose the most recent. zip or tar for odin.
for a rom i suggest svelte to get things straight.
then go from there.
m
Click to expand...
Click to collapse
moonbutt74 said:
I hear you, okay,
svelte rom thread - http://forum.xda-developers.com/showthread.php?t=2722582
great rom, minimal issues. philz advanced recovery is cwm with a good touch interface and more and very helpful options.
So yes, switch. All else is almost always solveable as long as your recovery is solid.
m
Click to expand...
Click to collapse
To be 100% sure when people say recovery they mean the programs like CWM or TeamWin and so on right ?
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
But the thing is that the problem is the installation process, it does not matter what ROM i use i get still the same error.
And for the Philz Touch could you copy the name of the link that i should download, they all look the same and way more links that i am used to.
Audriuss95 said:
To be 100% sure when people say recovery they mean the programs like CWM or TeamWin and so on right ?
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
But the thing is that the problem is the installation process, it does not matter what ROM i use i get still the same error.
And for the Philz Touch could you copy the name of the link that i should download, they all look the same and way more links that i am used to.
Click to expand...
Click to collapse
The reason you can't install any rom is because you do not have the latest version of CWM installed. You should always install the newest version when you install any recovery.
The newer roms are using an updater-script that will not work on CWM 6.0.4.7. Install an updated recovery and then install the rom that you want.
Sent from my SM-T310 using Tapatalk
Audriuss95,
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
To answer your question no yes maybe. Travel around through XDA and read/learn and you will understand.
as for philz i would try this one https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/philz_touch_6.44.9-lt02wifi.zip
in general find a recovery that works for you and stick with it until an update is actually called for.
m
If I were you, I would unroot and return to stock using ODIN first before I try anything else. If you need instructions, Google "unroot and return to stock using ODIN".
1
gr8nole said:
The reason you can't install any rom is because you do not have the latest version of CWM installed. You should always install the newest version when you install any recovery.
The newer roms are using an updater-script that will not work on CWM 6.0.4.7. Install an updated recovery and then install the rom that you want.
Sent from my SM-T310 using Tapatalk
Click to expand...
Click to collapse
What is then the newest version that i can use on this device ? could you maybe throw a link at me ?
moonbutt74 said:
Audriuss95,
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
To answer your question no yes maybe. Travel around through XDA and read/learn and you will understand.
as for philz i would try this one
in general find a recovery that works for you and stick with it until an update is actually called for.
m
Click to expand...
Click to collapse
Thank you for the answear. gone try a little bit more with the recovery i already have and update it like gr8nole said. Maybe that could be my big problem.
ikeny said:
If I were you, I would unroot and return to stock using ODIN first before I try anything else. If you need instructions, Google "unroot and return to stock using ODIN".
Click to expand...
Click to collapse
Yeah i have thought of that but the thing is i never took a backup so i cant go back atleast from what i read on google.
Audriuss95 said:
Yeah i have thought of that but the thing is i never took a backup so i cant go back atleast from what i read on google.
Click to expand...
Click to collapse
Without a backup, you will lose your data and files. But you can restore, since you can download the firmware from SamMobile.
Audriuss95 said:
What is then the newest version that i can use on this device ? could you maybe throw a link at me ?
Click to expand...
Click to collapse
6.0.4.9 is the latest.
http://www.androidfilehost.com/?w=files&flid=12949
Choose the one with "flashable" in the name and then flash it using your current CWM recovery; then reboot recovery.
1
ikeny said:
Without a backup, you will lose your data and files. But you can restore, since you can download the firmware from SamMobile.
Click to expand...
Click to collapse
I downloaded the FirmWare from SamMobile still get an error. the one that a wrote above.
gr8nole said:
6.0.4.9 is the latest.
Choose the one with "flashable" in the name and then flash it using your current CWM recovery; then reboot recovery.
Click to expand...
Click to collapse
Ok i am going to try out that file.
I use that flashable file like i would install ROM ? right but it on SD card and not use ODIN or ?
1
I updated to to the newest CMW tried the CM mod and got an error but it only said "Installation Aborted" the i tried to install the RocketTab 3.1 and it worked. I downloaded it from the this thread [ROM][SM-T210/T210R][Jan 30] RocketTab v3.1 Lite / Full / MODs
But i would rather like to have CM what can do ?
hey
Audriuss95 said:
I updated to to the newest CMW tried the CM mod and got an error but it only said "Installation Aborted" the i tried to install the RocketTab 3.1 and it worked. I downloaded it from the this thread [ROM][SM-T210/T210R][Jan 30] RocketTab v3.1 Lite / Full / MODs
But i would rather like to have CM what can do ?
Click to expand...
Click to collapse
good to hear you got it sorted. CM just isn't happening yet. just watch the forum like a hawk like everyone else is...:cyclops:
If your worried about destroying your tab you prolly shouldn't have come to mod it.I know sounds like a douche bag thing to say but even putting on the flash or roms that go with the tab can destroy your tab if done improperly or even if they glitched while flash which does happen or even worse power outage when flashing.
1
moonbutt74 said:
good to hear you got it sorted. CM just isn't happening yet. just watch the forum like a hawk like everyone else is...:cyclops:
Click to expand...
Click to collapse
So i should put the CM mod aside ?
piercejpierce said:
If your worried about destroying your tab you prolly shouldn't have come to mod it.I know sounds like a douche bag thing to say but even putting on the flash or roms that go with the tab can destroy your tab if done improperly or even if they glitched while flash which does happen or even worse power outage when flashing.
Click to expand...
Click to collapse
Nono it is okey to say something like this, but the thing is i like to learn this stuff, took me about 3 days to learn how to flash a BIOS on a computer but when i got the hang of it i learned it.
I am scared of destroying the tablet but how else would i learn ? cause reading does not always help But i got it back up again. And i knew when to ask for help.
But the RocketTab looks to work well at least for know, but would love CM mod couse i have it on my S4 and when and with the RocketTab i only get android version 4.1.2
1
Thank you for the fast help, the tablet is up and running, gone skip for know trying to use CM mod.