Related
Hey guys,
I tried to find a thread about my question, but couldn't find a convenient one.
How can I reset my LT18i to complete stock setup? Including ROM, Kernel and Baseband? Maybe unroot it too.
A further question as an alternative for me..
What is the best Kernel to use in CM7? I'm currently on 2.6.32.9-FXP, but games tend to lag, battery unloads very quick. I have to reload the battery at least every night.
Thanks in advice.
echo1991
echo1991 said:
Hey guys,
I tried to find a thread about my question, but couldn't find a convenient one.
Click to expand...
Click to collapse
Hi.
There are plenty out there - return xperia arc to stock
http://forum.xda-developers.com/showthread.php?p=35910775#post35910775
allright Thanks to that!
how about the CM7 Kernel?
echo1991 said:
allright Thanks to that!
how about the CM7 Kernel?
Click to expand...
Click to collapse
Pretty basic kernel. Nothing special.
Try Doomlord CM7 kernel instead!
Sent from my CM9 powered Samsung Galaxy S3
Destroyedbeauty said:
Try Doomlord CM7 kernel instead!
Click to expand...
Click to collapse
okay. I tried doomkernel v22 now, flashed it and installed the modules. but after rebooting the touchscreen doesn't work in CM7 and I got no service. however, the touchscreen works in bootloader/CWM
i'm using CM7 FXP130, baseband 72
I flashed the kernel via fastboot to replace the actual FXP kernel.
echo1991 said:
okay. I tried doomkernel v22 now, flashed it and installed the modules. but after rebooting the touchscreen doesn't work in CM7 and I got no service. however, the touchscreen works in bootloader/CWM
i'm using CM7 FXP130, baseband 72
I flashed the kernel via fastboot to replace the actual FXP kernel.
Click to expand...
Click to collapse
1. You can't use Doomlords Gingerbread kernel on CM7! This one is the correct one -> Doomlord CM7-kernel
2. And baseband 72 is not for 2.3.x based ROMs..
Destroyedbeauty said:
1. You can't use Doomlords Gingerbread kernel on CM7! This one is the correct one -> Doomlord CM7-kernel
2. And baseband 72 is not for 2.3.x based ROMs..
Click to expand...
Click to collapse
okay i'll try that one.
which baseband is the right one? do you recommend one? though baseband 72 actually works =/
echo1991 said:
okay i'll try that one.
which baseband is the right one? do you recommend one? though baseband 72 actually works =/
Click to expand...
Click to collapse
For CM7.2 - baseband 36 with corresponding libs is the ****.
Sent from my CM9 powered Samsung Galaxy S3
thanks! works so far. I'll have a look at my battery if something changed.
everything works fine
thanks!
echo1991 said:
thanks! works so far. I'll have a look at my battery if something changed.
everything works fine
thanks!
Click to expand...
Click to collapse
Trust me, it will change
Sent from my CM9 powered Samsung Galaxy S3
Hey guys I rooted my note 3 and put the wicked v1 rom on. And everything works perfectly except I cant get the one hand gesture to work where the screen gets small. I tried it all ways by doing the gestures,but nothing. Is there any solution to it ? I use to have the darkstalker rom and it worked fine. lmk please and thanks
takhawaja said:
Hey guys I rooted my note 3 and put the wicked v1 rom on. And everything works perfectly except I cant get the one hand gesture to work where the screen gets small. I tried it all ways by doing the gestures,but nothing. Is there any solution to it ? I use to have the darkstalker rom and it worked fine. lmk please and thanks
Click to expand...
Click to collapse
did you check if it was activated in settings ?
sharl1987 said:
did you check if it was activated in settings ?
Click to expand...
Click to collapse
yes it is checked on in settings I even flashed the rom again and it still doesnt work.
takhawaja said:
yes it is checked on in settings I even flashed the rom again and it still doesnt work.
Click to expand...
Click to collapse
I don't really use wicked rom, but I think you should ask the same question in their thread, I am sure someone will help you
sharl1987 said:
I don't really use wicked rom, but I think you should ask the same question in their thread, I am sure someone will help you
Click to expand...
Click to collapse
thanks ! I just flashed back to the darkstalker rom and it works fine. Plus since I am a new comer I cant even post a question on that post until I have 10 posts -___- lol
Q&A for [KERNEL][AGNi][STOCK] 19-10-2014 AGNi pureSTOCK N7100 (ULTRA SMOOTH)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
deleted
hello,
is it possible to compile the "android-keyboard-gadget" mod in this kernel? or tutorial?
https://github(dot)com/pelya/android-keyboard-gadget
thank you in advance
ps: sorry for my bad English
Hi,why i cant use this kernel since 4.2.8. First boot working,but after entering homescreen it reboots and stuck in samsung logo. But works ok on 4.2.7 to all previous. Im on old botloader. thanks.
Sent from my GT-N7100 using Tapatalk
dollyaja said:
Hi,why i cant use this kernel since 4.2.8. First boot working,but after entering homescreen it reboots and stuck in samsung logo. But works ok on 4.2.7 to all previous. Im on old botloader. thanks.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Try to reset all settings in AGNi Control app and clean init.d folder. Then flash 4.2.9 and mali blobs (the old ones).
fx-raziel said:
hello,
is it possible to compile the "android-keyboard-gadget" mod in this kernel? or tutorial?
https://github.com/pelya/android-keyboard-gadget
thank you in advance
ps: sorry for my bad English
Click to expand...
Click to collapse
will hav a look
psndna88 said:
will hav a look
Click to expand...
Click to collapse
Thank you in advance , keep us informed , please
ps: sorry for my bad English
squicky said:
Try to reset all settings in AGNi Control app and clean init.d folder. Then flash 4.2.9 and mali blobs (the old ones).
Click to expand...
Click to collapse
Just did. Still having same issue. Well..i guess ill stick with 4.2.5 sunce its the most stable one for me. Thanks anyway mate
Sent from my GT-N7100 using Tapatalk
i think i have clue for sod issue
fx-raziel said:
hello,
is it possible to compile the "android-keyboard-gadget" mod in this kernel? or tutorial?
https://github(dot)com/pelya/android-keyboard-gadget
thank you in advance
ps: sorry for my bad English
Click to expand...
Click to collapse
I have it working on my i9300 and i9305 on cm v2.9.0 kernels published on xda.
check threads...
will be made on note 2 shortly.
psndna88 said:
I have it working on my i9300 and i9305 on cm v2.9.0 kernels published on xda.
check threads...
will be made on note 2 shortly.
Click to expand...
Click to collapse
hi, this is good news, thank you
http://forum.xda-developers.com/devdb/project/dl/?id=9185
@psndna88
Hi bro!
What setting should i set in Agni if i want to squeeze the maximum performance w/o worrying about battery life as i have a spare one.
sod
Rom Phoeninx 18.5 problem of sod. With kernel 2.3.9 and 2.4.0 with default settings. Changing gpu min clock and gpu power saving seem ok. But my question is: so I have a very big consumption fo battery?
simona.pisano.70 said:
Rom Phoeninx 18.5 problem of sod. With kernel 2.3.9 and 2.4.0 with default settings. Changing gpu min clock and gpu power saving seem ok. But my question is: so I have a very big consumption fo battery?
Click to expand...
Click to collapse
is that 4.4.2 rom or 4.3 ?
r u using latest version kernel? latest 4.3.0 for 4.4.x roms .....
zeeshanonlyme said:
@psndna88
Hi bro!
What setting should i set in Agni if i want to squeeze the maximum performance w/o worrying about battery life as i have a spare one.
Click to expand...
Click to collapse
gaming profile in agni control.
4.4.2
Simona Pisano - Note 2
simona70 said:
4.4.2
Simona Pisano - Note 2
Click to expand...
Click to collapse
simona.pisano.70 said:
Rom Phoeninx 18.5 problem of sod. With kernel 2.3.9 and 2.4.0 with default settings. Changing gpu min clock and gpu power saving seem ok. But my question is: so I have a very big consumption fo battery?
Click to expand...
Click to collapse
change to a latest 4.4.x rom.... n use latest kernel....
I just upgraded to DN4, which has a Kernel version of 3.0.101-India-v.4.2.5-OC-INTL-KitKat [email protected] #1, from August 16th 2014.
I'd like to try out 4.3 but have the option to flash back later if I find that 4.2.5 was better. However, I don't see it in the Downloads list here, so where can I get it?
jshare said:
I just upgraded to DN4, which has a Kernel version of 3.0.101-India-v.4.2.5-OC-INTL-KitKat [email protected] #1, from August 16th 2014.
I'd like to try out 4.3 but have the option to flash back later if I find that 4.2.5 was better. However, I don't see it in the Downloads list here, so where can I get it?
Click to expand...
Click to collapse
Its on the 1st page kernel thread. Here http://d-h.st/users/psndna88/?fld_id=36625#files
Sent from my GT-N7100 using Tapatalk
dollyaja said:
Its on the 1st page kernel thread. Here http://d-h.st/users/psndna88/?fld_id=36625#files
Click to expand...
Click to collapse
Thanks!
Is there any way I can get it without installing all the adware junk?
ok, so i was trying to mess around a lil bit and i flashed DN4 for the N7100 . Amazingly , everything worked perfectly except the baseband was unknown. I flashed a modem but it still didnt work. Apart from that, everything works great including the wifi too. Anyone with a workaround for the baseband fix could kindly help.....
Ditto Note 4 v2 How To:
1. Write Down Voicemail Number
2. Download DN4v2LTE (Link Below)
3. Download AddOn v1.1 (Link Below)
4. Boot into Recovery
5. Start with a clean wipe including INTERNAL Storage (System, Data, Cache & Dalvik Cache should be included in your clean install)
6. With the Rom saved to your External SdCard Flash DN4v2LTE
7. DO NOT REBOOT
8. Flash AddOn v1.1
9. Reboot
10. Go through the Setup Wizard
11. Open Dialer app > Keypad > Menu > Settings > Call > Voicemail Settings & put Voicemail number in place..
Profit.
Ditto Note 4 Version 2 LTE<-- E-Team Website Link
Add-On Version 1.1<-- pCloud Link from ykkfive
If anyone needs the SecEmail.apk
SecEmail.apk <-- Mega Download
Thank if this helped you
zyfloss said:
ok, so i was trying to mess around a lil bit and i flashed DN4 for the N7100 . Amazingly , everything worked perfectly except the baseband was unknown. I flashed a modem but it still didnt work. Apart from that, everything works great including the wifi too. Anyone with a workaround for the baseband fix could kindly help.....
Click to expand...
Click to collapse
Just a quick update on this entire DN4 thing... the link isnt up yet BUT someone is creating a zip to flash to get the N7100 DN4 to work with N7105 Variants. Look in the N7105 Development Threads... I cant wait to get it going myself...I already made my Nandroid Backup.
Update: The patch is live. But it needs a few things to get it to work on out T889 Toltetmo variant.
Heres whats needed:
Download DN4 for N7100
Download Patch
Download AGNi Kernel for N7105 for TW.
Download Tmo Modem (MK7)
You'll need to fix the updater-script in the patch to say toltetmo before flashing it.
Still cant get it to read my sim so I have no cellular or data connection at the moment.. gonna try a different approach that I just read.
Double0EK said:
Update: The patch is live. But it needs a few things to get it to work on out T889 Toltetmo variant.
Heres whats needed:
Download DN4 for N7100
Download Patch
Download AGNi Kernel for N7105 for TW.
Download Tmo Modem (MK7)
You'll need to fix the updater-script in the patch to say toltetmo before flashing it.
Still cant get it to read my sim so I have no cellular or data connection at the moment.. gonna try a different approach that I just read.
Click to expand...
Click to collapse
Thanks man....i really wish u could find a solution to the cellular issue...waiting patiently...
I have it fully functioning on my T889 now. Check your pm's
Double0EK said:
I have it fully functioning on my T889 now. Check your pm's
Click to expand...
Click to collapse
drop me a pm also thanks.
Awesome!
Double0EK said:
I have it fully functioning on my T889 now. Check your pm's
Click to expand...
Click to collapse
Awesome! D, i flashed and everything works perfectly. Thank u @dOubleOEK....U really helped out.
zyfloss said:
Awesome! D, i flashed and everything works perfectly. Thank u @dOubleOEK....U really helped out.
Click to expand...
Click to collapse
2 bugs that the devs are working on (i think) is GPS not connecting and Signal Bars not showing Signal Strength. But i think the Rom is Stable as hell.
Also pair it with AGNi 4.3.3R3 for the N7105 and its much better!
hello double0ek
if you dont mind i would like to know how to get my sim card working as well
thanks
Could I have a PM as well?
Double
Double0EK said:
2 bugs that the devs are working on (i think) is GPS not connecting and Signal Bars not showing Signal Strength. But i think the Rom is Stable as hell.
Also pair it with AGNi 4.3.3R3 for the N7105 and its much better!
Click to expand...
Click to collapse
Double0EK, is there a fix for the signal bars already? I saw a dude post one with the signal bars showing on Note 2 facebook page and he use the N7105....Please update me if its available...Thanks
zyfloss said:
Double0EK, is there a fix for the signal bars already? I saw a dude post one with the signal bars showing on Note 2 facebook page and he use the N7105....Please update me if its available...Thanks
Click to expand...
Click to collapse
Yes..but ykkfive fixed gps. Im sure it'll be released sometime soon. I'll pm you.
So I was wondering if and when these fixes will be posted. I would love to try dn4. I have loaded it and get all the same issues. If someone could pm me too that would be awesome. Already tried everything that worked for dn3v5. Hope I'm not overstepping my bounds( new to forum here)
Double0EK said:
I have it fully functioning on my T889 now. Check your pm's
Click to expand...
Click to collapse
Could I please get a PM as well?
Double0EK said:
Yes..but ykkfive fixed gps. Im sure it'll be released sometime soon. I'll pm you.
Click to expand...
Click to collapse
Any way I can get a PM on how to set it up and install it?
d34thp1ng said:
Any way I can get a PM on how to set it up and install it?
Click to expand...
Click to collapse
If you don't have it yet I pm'd you.
Double0EK said:
Yes..but ykkfive fixed gps. Im sure it'll be released sometime soon. I'll pm you.
Click to expand...
Click to collapse
Double0EK, you have fix for gps? Can you please pm me? Thanks.
ddang25377 said:
Double0EK, you have fix for gps? Can you please pm me? Thanks.
Click to expand...
Click to collapse
I dont have a gps fix. It hasnt been published yet...I'll pm you what i have.
That DN4 Goodness! Lol
If you edit the build.prop please be sure to have entered your voicemail number in call settings FIRST or it will gray it out and you'll need to start from scratch.
Guys Here's a new toy. very warm hug for Blisspop team for the nice rom and Cantata for the kernel and RAKT for shareing this supersmooth baby
Rom Link :
Link V1.3:
https://docs.google.com/file/d/0B0btf3xc7XtSa2xSOWg5VmFuUXc
http://4share.vn/f/3a090d090b090309/F240-CM12-BlissPop1.3.rar
New version 1.4
https://drive.google.com/file/d/0Bya...xzZVE1Vk0/view
instruction: full wipe and flash rom>gapps
reboot. install Selinux mode changer and select permissive. reboot.
camera, youtube, display fickers are fixed. :angel:
Deep sleep ..still no luck
Any suggestion tweaks are welcome
Enjoy
Running good so far on my e980 camera works as stated front and back, will continue to test throughout the day and report back.
wifi problem
facing wifi problem while using every custom rom anybody know whats the issue ?
Using E980 at&t
Used CWM 6.0.4.7 for flashing and also use new Phillz touch recovery but same problem on all custom roms working perfect on stock based roms.. any idea ??
zohaibkhan143 said:
facing wifi problem while using every custom rom anybody know whats the issue ?
Using E980 at&t
Used CWM 6.0.4.7 for flashing and also use new Phillz touch recovery but same problem on all custom roms working perfect on stock based roms.. any idea ??
Click to expand...
Click to collapse
collect wifi driver from stock system/lib/hw/wifi...so test with it by replacing at any other roms you love.
ecrum said:
collect wifi driver from stock system/lib/hw/wifi...so test with it by replacing at any other roms you love.
Click to expand...
Click to collapse
no wifi drivers there anything else ? I replace the wifi folder in etc but it didnt work
[/COLOR]
ecrum said:
collect wifi driver from stock system/lib/hw/wifi...so test with it by replacing at any other roms you love.
Click to expand...
Click to collapse
What do you mean by install selinux mode changer and select permissive. Are those zips that I should install/flash?
starboyreid said:
[/COLOR]
What do you mean by install selinux mode changer and select permissive. Are those zips that I should install/flash?
Click to expand...
Click to collapse
its the apk file included in the zip. install it after 1st successful boot
ecrum said:
its the apk file included in the zip. install it after 1st successful boot
Click to expand...
Click to collapse
OK I've booted successfully,but the ROM isn't detecting my external SD card. Please tell me what to do?
Thanks in advance...
i am also having issues with the wifi on my F240S, wifi doesnot turn on once sim is inserted. i have tried wifix , wifi codes, noting worked. someone help
Save issue with me on every custom rom on e980
Sent from my LG-E980 using XDA Free mobile app
New version 1.4
https://drive.google.com/file/d/0ByajgP3cPjCUcjZ3MkxzZVE1Vk0/view
wifi problem is still there
mac address changes on reboot ...
anyone have ideas , please reply
Thanks
Heey good work. Very nice ROM. I liked. Soo I'm facing one problem I cannot receive any file via wifi(ShareIt). My friends cannot see my phone. Except this very very good work. And you wrote this ROM 1.4 version but still there 1.3 version. But changed android version to 5.0.2. Nevermind sooooooo perfect lollipop ROM. Thank you for cared about us.
UzbekBoy said:
Heey good work. Very nice ROM. I liked. Soo I'm facing one problem I cannot receive any file via wifi(ShareIt). My friends cannot see my phone. Except this very very good work. And you wrote this ROM 1.4 version but still there 1.3 version. But changed android version to 5.0.2. Nevermind sooooooo perfect lollipop ROM. Thank you for cared about us.
Click to expand...
Click to collapse
are u facing any voice issues during call like voice breakage of urs or the caller unable to hear ur voice for sometime or low voice?is it stable? any bugs ur facing?
mnaveed said:
New version 1.4
https://drive.google.com/file/d/0ByajgP3cPjCUcjZ3MkxzZVE1Vk0/view
wifi problem is still there
mac address changes on reboot ...
anyone have ideas , please reply
Thanks
Click to expand...
Click to collapse
this is a problem with blisspop itself and i mean it they are working hard. perhaps patience will mend this problem soon . thnx for the update link. i did't tested it bt will update OP. thnx