[Q] wildfire S Unlock boot loader - HTC Wildfire S

Dear Guru's
I am new to this rooting / Flashing custom ROM's of Android.
I am trying to unlock the bootloader from HTCDEV.COM. The step says remove the battery and start device with volume key down and power button.
First option is as per FASTboot, when I press the power button it is scanning for PG76IMG.zip and again in the same screen.
No other option reboot bootloader. Thats it.
Because of this if i hit "fastboot oem get_identifier_token" I am getting message <Waiting for Device>
STuck in this for a more than 2 days.
ADB able to recognize my device " adb devices" its showing the serial number
Fastboot not able to recognize "fatboot devices" returns nothing
Kindly help out. I need custom OS and need space to install apps. Stuck with very less internal memory.
Regards
shankar PV

shanbca said:
Dear Guru's
I am new to this rooting / Flashing custom ROM's of Android.
I am trying to unlock the bootloader from HTCDEV.COM. The step says remove the battery and start device with volume key down and power button.
First option is as per FASTboot, when I press the power button it is scanning for PG76IMG.zip and again in the same screen.
No other option reboot bootloader. Thats it.
Because of this if i hit "fastboot oem get_identifier_token" I am getting message <Waiting for Device>
STuck in this for a more than 2 days.
ADB able to recognize my device " adb devices" its showing the serial number
Fastboot not able to recognize "fatboot devices" returns nothing
Kindly help out. I need custom OS and need space to install apps. Stuck with very less internal memory.
Regards
shankar PV
Click to expand...
Click to collapse
did you installed HTC sync on your pc? because fastboot needs drivers to recognize your device.and HTC sync has htc drivers.so once installed htc sync then try it.

crossfire77 said:
did you installed HTC sync on your pc? because fastboot needs drivers to recognize your device.and HTC sync has htc drivers.so once installed htc sync then try it.
Click to expand...
Click to collapse
YEs HTC sync installed is already there. I can able to syncronize with HTC sync.
Even if i execute "adb devices" -> it showing my device in the command prompt.
but while executing "fastboot devices" -> its showing nothing
Regards
Shankar PV

shanbca said:
YEs HTC sync installed is already there. I can able to syncronize with HTC sync.
Even if i execute "adb devices" -> it showing my device in the command prompt.
but while executing "fastboot devices" -> its showing nothing
Regards
Shankar PV
Click to expand...
Click to collapse
i dont think you need to write command fastboot devices,it wont work like that.if adb devices showed your device then that step is correct.
that should be working.
you doing same as,
remove battery and insert it again
then hold volume down and power button.
it shows you bootloader menu,wait for some seconds while it scans some .zip files on your sd card.
then go on fastboot.
done.
after going fastboot you dont need to do anything,like selecting reboot,bootloader or anything.just leave your phone as it is and try commands from cmd.it should be working and yeah when you are doing this process close your htc sync from taskbar.
good luck.

crossfire77 said:
i dont think you need to write command fastboot devices,it wont work like that.if adb devices showed your device then that step is correct.
that should be working.
you doing same as,
remove battery and insert it again
then hold volume down and power button.
it shows you bootloader menu,wait for some seconds while it scans some .zip files on your sd card.
then go on fastboot.
done.
after going fastboot you dont need to do anything,like selecting reboot,bootloader or anything.just leave your phone as it is and try commands from cmd.it should be working and yeah when you are doing this process close your htc sync from taskbar.
good luck.
Click to expand...
Click to collapse
Hello Cross fire,
Amazing help....
YEs I am done with boot loader unlock.
Thaks much for your help :good:
Now i need another favour from your side.
I need to install ICS in my WFS and i need more internal space for the apps.
Please guide me which link i have to follow.
Regards
Shankar PV

shanbca said:
Hello Cross fire,
Amazing help....
YEs I am done with boot loader unlock.
Thaks much for your help :good:
Now i need another favour from your side.
I need to install ICS in my WFS and i need more internal space for the apps.
Please guide me which link i have to follow.
Regards
Shankar PV
Click to expand...
Click to collapse
thats good.okay for ICS roms you can go for int2ext+ scripts.they are famous and fast than others.
here is link:
http://forum.xda-developers.com/showthread.php?t=1716124
and yeah if you chose ICS rom they will support int2ext+ and int2ext4+ scripts.
so its upto your choice.both are great,you can choose any one.
might you know about partitioning sd card,if you dont its here(and also describe in mentioned link)
1)fat32
2)ext3 (if you choose int2ext+ ) or ext4(if you choose int2ext4+)
now you bootloader unlock so root your phone with htcsupertool and
then install recovery via rom manager(you can find that app in market)
and then download appropriate ICS rom and flash it.
after flashing rom,flash int2ext+ file
and then go to "mount and storage" and click on format /sd-ext
(dont worry about int2ext+,instructions are on mentioned link)
hope it ll help.
---------- Post added at 01:33 PM ---------- Previous post was at 01:28 PM ----------
and yeah when you use int2ext+ script make ext3 or ext4 partition upto 1 GB.it will enough for your all apps.

crossfire77 said:
thats good.okay for ICS roms you can go for int2ext+ scripts.they are famous and fast than others.
here is link:
http://forum.xda-developers.com/showthread.php?t=1716124
and yeah if you chose ICS rom they will support int2ext+ and int2ext4+ scripts.
so its upto your choice.both are great,you can choose any one.
might you know about partitioning sd card,if you dont its here(and also describe in mentioned link)
1)fat32
2)ext3 (if you choose int2ext+ ) or ext4(if you choose int2ext4+)
now you bootloader unlock so root your phone with htcsupertool and
then install recovery via rom manager(you can find that app in market)
and then download appropriate ICS rom and flash it.
after flashing rom,flash int2ext+ file
and then go to "mount and storage" and click on format /sd-ext
(dont worry about int2ext+,instructions are on mentioned link)
hope it ll help.
---------- Post added at 01:33 PM ---------- Previous post was at 01:28 PM ----------
and yeah when you use int2ext+ script make ext3 or ext4 partition upto 1 GB.it will enough for your all apps.
Click to expand...
Click to collapse
Thanks for the reply..
Could you please through some light on how to proceed further.
I just done with Bootloader unlock. Read from some thread to take a backup of the phone with Rom manager and Clock work mod.
then what should be my next step.
Any proper links which you can recommend for me to follow?
Thanks
Shankar PV

shanbca said:
Thanks for the reply..
Could you please through some light on how to proceed further.
I just done with Bootloader unlock. Read from some thread to take a backup of the phone with Rom manager and Clock work mod.
then what should be my next step.
Any proper links which you can recommend for me to follow?
Thanks
Shankar PV
Click to expand...
Click to collapse
yeah sure..now you restart your phone and you can see nothing changed.next step only needs usb debugging enabled.
after unlocking your bootloader you should root your phone.(unlocking bootloader won't add root permissions so,)
so for that follow this link (see step 3)
http://www.htcwildfiresblog.com/2012/03/guide-to-rooting-htc-wildfire-s-235-s.html
then after this your phone is rooted..congrats.
you can see superuser app in your app list.
then download ROM Manager from play store.
after open this app you can see first option "flash clockworkmod recovery"
click on that.
that will show your model as wildfire s and after you click on it.it ll download recovery itself and flash itself.
then you done.now you can flash custom roms.
next step is backup your current stock rom,so you can see backup option in ROM Manager app.
then click on it and it ll made backup of it.(dont worry while backup of ur rom,your phone restart and go to recovery and you can see process)
after finishing backup you can restart your phone.
you can see restart option in recovery..
then you done..now dont worry about anything..you can port any available roms and something went wrong someday or if u want back ur stock rom you can restore it.
---------- Post added at 02:58 PM ---------- Previous post was at 02:48 PM ----------
crossfire77 said:
yeah sure..now you restart your phone and you can see nothing changed.next step only needs usb debugging enabled.
after unlocking your bootloader you should root your phone.(unlocking bootloader won't add root permissions so,)
so for that follow this link (see step 3)
http://www.htcwildfiresblog.com/2012/03/guide-to-rooting-htc-wildfire-s-235-s.html
then after this your phone is rooted..congrats.
you can see superuser app in your app list.
then download ROM Manager from play store.
after open this app you can see first option "flash clockworkmod recovery"
click on that.
that will show your model as wildfire s and after you click on it.it ll download recovery itself and flash itself.
then you done.now you can flash custom roms.
next step is backup your current stock rom,so you can see backup option in ROM Manager app.
then click on it and it ll made backup of it.(dont worry while backup of ur rom,your phone restart and go to recovery and you can see process)
after finishing backup you can restart your phone.
you can see restart option in recovery..
then you done..now dont worry about anything..you can port any available roms and something went wrong someday or if u want back ur stock rom you can restore it.
Click to expand...
Click to collapse
thats it all.
now after root,backup your phone.
you need to find roms which you want to install on your phone.here is that android dev thread link:
http://forum.xda-developers.com/forumdisplay.php?f=1038
&
this thread is for internal memory,
http://forum.xda-developers.com/showthread.php?t=1716124
(use int2ext+ or int2ext4+ )

Related

[Q] [Ask]CyanogenMod7.1 (Android 2.3.7)

hello to all Xda member.
im a newbie about CyanogenMod7.1 (Android 2.3.7)
i currently facing a problem about the insufficient internal memory of my Desire.
and i would like to ask that, arent that suppose those apps can be fully move into SD card?
becoz i saw n heard that rooted phone can do so.
is there any assistance to help me out here? thx guys.
i really hate short of internal memory.
btw, if i posted at the wrong section, pls move me to the correct section. thx.
are you s-off?
you can use different hboot to increase data partition or use a2sd script
just install from market an app called s2e
And move application and dalvik to ext!
You will have plenty of space.
Go to alpharev.nl and apply this Bravo Data++. You will have enough storage and your rom will be prepared for ICS.
--
Sent from my unstable ROM
i don understand la guys, can giv more guide n explanation?
changing hboot will provide a new partition layout
stock one:
system-250 MB
cache-40 MB
data-147 mb
CM7/r2:
system-145 MB
cache-5 MB
data-287 MB
So you can see the increase on data partition. As you running CM7.1 i would change hboot to cm7 or cm7r2(on alpharev.nl) depends on developer instruction
ClockWorkMod Recovery Problem..
Folks Would really appreciate some advice here stuck with a problem. I have two other phones I have installed custom ROMS on so got a little knowledge but Im a bit stuck with my daughters HTC desire..
I use revolutionary to S-off & aquire root. I then installed ROM manager & flashed latest ClockworkMod (ver 5.0.2.0). After that I copied CM7 & GBAPPS to the external SD card in preparation for the install. I then choose install ROM from SD card, the phone rebooted & nstalled CM7 but no google apps. NOW when i boot into recovery and select install zip from file I only get a clockwork logo so I am now stuck & dont know what to do really appreciate some help !!! Im panicing !!
Don't panic. Go to recovery again. "back button + power button" and then select recovery. Wipe all, cache, dalvik and install again. Don't reboot. Install gapps also then reboot.
--
Sent from my Desire CM7 nightly
can you boot normally? if yes uzip the googleapps zip and copy/move them to app directory and reboot
jjjkkklll said:
i don understand la guys, can giv more guide n explanation?
Click to expand...
Click to collapse
Download Ubuntu Linux or any other live system. Run it. Download fastboot program. Run terminal. Enter 'chmod 777 fastboot' in terminal . Put your phone in hboot mode. "back button + power button" attach USB to your phone and PC. Run ./fastboot --help in terminal to see options.
--
Sent from my Desire CM7 nightly
---------- Post added at 10:44 PM ---------- Previous post was at 10:00 PM ----------
Now I'm at my PC so I can be more specific. Fastboot is a program that you need to download. You can find it on web. It runs on Linux OS. So you need some Linux distribution. Try linux mint debian (my favorite) or Ubuntu. You don't have to install it, just run it in Live mode. After you boot Linux in Live mode, download fastboot-linux program and bravo_alphaspl-data.img from alpharev.nl site. In programs find terminal. Enter these commands and press enter
- sudo su
- cd Download (or where you have downloaded the fastboot-linux and bravo_alphaspl-data.img) files
- chmod +x fastboot-linux
Power up your HTC with "back button and power button" and connect it with your PC with USB cable
Finaly enter this command
./fastboot-linux flash hboot bravo_alphaspl-data.img
That's it. You should see some info in terminal. I'm a Linux sys admin and first time I didn't understand it also what the heck is going on. AlphaRev should make their docs better.
Hope it helps.
Unrevoked Can not Get Root . Is there an Alternative ?????
People/Gurus
Yesterday got one HTC Desire off stock & running CM7 but having problems with my other daughters....
Procedures that lead me to this point
1. Installed revolutionary & gained S-OFF.
2. Used unrevoked 3 to try & gain root but have been unable to do so. All looks good till near the end when it says "running root" then a message that says "Error: failed to get root. Is your firmware too new ?"
I am desparately needing some advice. Yesterdays went fine, with a little help from you angels of mercy !! Now I need you all again :-(
Thanks for reading
John
did you flash zip file from question 4 from http://unrevoked.com/rootwiki/doku.php/public/revolutionary
?
kotag82 said:
did you flash zip file from question 4 from http://unrevoked.com/rootwiki/doku.php/public/revolutionary
?
Click to expand...
Click to collapse
I did not. The reason why I did not was because I had read a post that said the CMW recovery that comes with revolutionary can be ignored, so I did not install it. My intention was to install ROM Manager & insall newest version of CWM from there, but now I cannot boot into recovery to install the zip. Is there another way ?
flash one of recoveries(via fastboot) from my signature then flash the zip... without recovery you can push files via adb to proper location then change permission but recovery is safer way and not painful...
See bortak guide step 10
kotag82 said:
flash one of recoveries(via fastboot) from my signature then flash the zip... without recovery you can push files via adb to proper location then change permission but recovery is safer way and not painful...
See bortak guide step 10
Click to expand...
Click to collapse
Can I ask your advice on one other thing please. During this adventure I have noticed many references to PVT4 and a size of 40000. This has caused me a little concern as mine does show PVT4 but cat /proc/mdc shows 20000 should I still be able to go ahead safely ?
One of mine is 40000 using rmd and 20000 I was using both rmd and touch recovery without any problem, I think it is related to old cwm recovery 2.x.x.x risk of sdcard and USB brick
Sent from my HTC Runnymede using XDA Premium App
kotag82 said:
One of mine is 40000 using rmd and 20000 I was using both rmd and touch recovery without any problem, I think it is related to old cwm recovery 2.x.x.x risk of sdcard and USB brick
Sent from my HTC Runnymede using XDA Premium App
Click to expand...
Click to collapse
Yeah, just found that via google... Just clicked your thanks metre, all good and working, really really really REALLY appreciate your time & patience, thanks again m8..
Welcome anytime
Sent from my HTC Runnymede using XDA Premium App
mlerota said:
Download Ubuntu Linux or any other live system. Run it. Download fastboot program. Run terminal. Enter 'chmod 777 fastboot' in terminal . Put your phone in hboot mode. "back button + power button" attach USB to your phone and PC. Run ./fastboot --help in terminal to see options.
--
Sent from my Desire CM7 nightly
---------- Post added at 10:44 PM ---------- Previous post was at 10:00 PM ----------
Now I'm at my PC so I can be more specific. Fastboot is a program that you need to download. You can find it on web. It runs on Linux OS. So you need some Linux distribution. Try linux mint debian (my favorite) or Ubuntu. You don't have to install it, just run it in Live mode. After you boot Linux in Live mode, download fastboot-linux program and bravo_alphaspl-data.img from alpharev.nl site. In programs find terminal. Enter these commands and press enter
- sudo su
- cd Download (or where you have downloaded the fastboot-linux and bravo_alphaspl-data.img) files
- chmod +x fastboot-linux
Power up your HTC with "back button and power button" and connect it with your PC with USB cable
Finaly enter this command
./fastboot-linux flash hboot bravo_alphaspl-data.img
That's it. You should see some info in terminal. I'm a Linux sys admin and first time I didn't understand it also what the heck is going on. AlphaRev should make their docs better.
Hope it helps.
Click to expand...
Click to collapse
hey there bro, any page / thread which give me a full guide? coz im new. =(

my phone keeps booting into fastboot mode

hello,
after i failed to root my phone
everytime i try to put it in recovery mode it goes back to fastboot mode ..
even if i tried to flash a recovery on it , it would boot to fastboot mode
even when trying to install a official htc software update it just boots into fastboot ..
now i want to get it back to stock..
can you please help me !!
if someone would like to help me .. i can open teamviewer and he can do it for me ..
thx
zsnorow said:
hello,
after i failed to root my phone
everytime i try to put it in recovery mode it goes back to fastboot mode ..
even if i tried to flash a recovery on it , it would boot to fastboot mode
even when trying to install a official htc software update it just boots into fastboot ..
now i want to get it back to stock..
can you please help me !!
if someone would like to help me .. i can open teamviewer and he can do it for me ..
thx
Click to expand...
Click to collapse
If you are able to boot into fastboot, search the latest TWRP and flash it via adb. Connect your device while in fastboot mode and see if it recognize it.
If it does put the recovery file you have downloaded on your desktop and open a command window, press shift and right click at the same time and click on Open command window here.
Type adb devices, if you see a serial number go on and type adb reboot bootloader, then type fastboot flash recovery [ the name of the recovery file you have just downloaded ]
You can do this just by powering on your phone, no need to be already in fastboot mode, just follow the commands.
Press shift and right click : open command window here : adb devices : adb reboot bootloader : fastboot flash recovery [ the name of the recovery file you have just downloaded, do not forget the .img extension ]
fastboot reboot
Once you have a working TWRP you can flash your corresponding backup and go back to stock. The backup will be flashed from TWRP, search for instructions.
XSL-FO said:
If you are able to boot into fastboot, search the latest TWRP and flash it via adb. Connect your device while in fastboot mode and see if it recognize it.
If it does put the recovery file you have downloaded on your desktop and open a command window, press shift and right click at the same time and click on Open command window here.
Type adb devices, if you see a serial number go on and type adb reboot bootloader, then type fastboot flash recovery [ the name of the recovery file you have just downloaded ]
You can do this just by powering on your phone, no need to be already in fastboot mode, just follow the commands.
Press shift and right click : open command window here : adb devices : adb reboot bootloader : fastboot flash recovery [ the name of the recovery file you have just downloaded, do not forget the .img extension ]
fastboot reboot
Once you have a working TWRP you can flash your corresponding backup and go back to stock. The backup will be flashed from TWRP, search for instructions.
Click to expand...
Click to collapse
can you sir please give me a link for the TWRP and teach em how to flash it ? it would be much appreciated..
zsnorow said:
can you sir please give me a link for the TWRP and teach em how to flash it ? it would be much appreciated..
Click to expand...
Click to collapse
http://teamw.in/project/twrp2 and click on the upper right Get TWRP for your device.
Choose your device recovery and download the adb version. That is the .img
Once you have downloaded TWRP put it on your desktop.
Connect your device with your laptop/pc with the unknown sources checked also the usb debugging checked.
Move your mouse over a free space on your desktop, click once just to be sure there is no app or file clicked.
Then press shift and keep it pressed while you right click your mouse.
Press open command window here
in that command window type : adb devices
if you see a serial number type : adb reboot bootloader
then type : fastboot flash recovery openrecovery-twrp-2.8.1.0-m8.img
fastboot reboot
openrecovery-twrp-2.8.1.0-m8 : This is an example, you will write the name of your recovery but it should be pretty much the same.
Good luck.
Are you familiar with
adb/fastboot commands?
It's a bad idea to mess with your phone if you don't know how to repair it if something goes wrong
spinninbsod said:
It's a bad idea to mess with your phone if you don't know how to repair it if something goes wrong
Click to expand...
Click to collapse
I agree with you but maybe he has done some reading and has fixed it sense he hasn't given us an update
ive tried everything
jball said:
I agree with you but maybe he has done some reading and has fixed it sense he hasn't given us an update
Click to expand...
Click to collapse
i tried everything to fix my phone like sideloading (my phone doesent get recognised when in sideload mode) , pushing a ROM and the flashing it with TWRP (it says that its completed but it doesent work)..
what else can i do .. cant someone do it for me via teamviewer ..
zsnorow said:
i tried everything to fix my phone like sideloading (my phone doesent get recognised when in sideload mode) , pushing a ROM and the flashing it with TWRP (it says that its completed but it doesent work)..
what else can i do .. cant someone do it for me via teamviewer ..
Click to expand...
Click to collapse
What guides/tutorials have you followed to get to the point you are at now.I'm sure someone wouldn't mind teamviewing the whole process but what would you learn by having that done .
From start to finish what have you used?
i honestly cant remember everything i did
jball said:
What guides/tutorials have you followed to get to the point you are at now.I'm sure someone wouldn't mind teamviewing the whole process but what would you learn by having that done .
From start to finish what have you used?
Click to expand...
Click to collapse
i cant remember everything i did but im sure that i followed the tutorials that are on youtube/XDA/android forums correctly
zsnorow said:
i tried everything to fix my phone like sideloading (my phone doesent get recognised when in sideload mode) , pushing a ROM and the flashing it with TWRP (it says that its completed but it doesent work)..
what else can i do .. cant someone do it for me via teamviewer ..
Click to expand...
Click to collapse
You say "pushing a ROM" with what?
You don't push a ROM with TWRP you just flash it.
Or are you talking about pushing the ROM with fastboot?
If you have TWRP than download a stock backup and flash it.
Take a long look at my profile man and if you look just right you will see I've done and asked some stupid things in my travels here on XDA.I can tell you I remember every phone and ridiculous thing I've done to each of them,I still feel crunchy when I think of the mistakes.
We really need more info about the full process.please I'm not trying to offend you and I'm trying to help
zsnorow said:
i cant remember everything i did but im sure that i followed the tutorials that are on youtube/XDA/android forums correctly
Click to expand...
Click to collapse
If you can't remember what you did, or at least even try to list in detail the steps you did as best you can remember; it makes it very hard for anyone to help.
Saying you followed some tutorials on an entire website (3 websites actually) doesn't tell us jack, and isn't any better than telling us nothing.
Its not even clear the current condition of the phone. Your OP says TWRP doesn't work, then a later post says you are trying things with TWRP, so presumably you have TWRP. But since you never stated that, we can only guess.
What happens when you try to adb push or sideload? What error messages, does it make the phone reboot, stuck on boot screen, etc?
TWRP working? Bootloader is unlocked? If yes to both of those, you should be able to just adb push a ROM, or put one on removable SD with a card reader attached to your computer. Than flash the ROM in TWRP.
same thing happened with me but i remember what i did
redpoint73 said:
If you can't remember what you did, or at least even try to list in detail the steps you did as best you can remember; it makes it very hard for anyone to help.
Saying you followed some tutorials on an entire website (3 websites actually) doesn't tell us jack, and isn't any better than telling us nothing.
Its not even clear the current condition of the phone. Your OP says TWRP doesn't work, then a later post says you are trying things with TWRP, so presumably you have TWRP. But since you never stated that, we can only guess.
What happens when you try to adb push or sideload? What error messages, does it make the phone reboot, stuck on boot screen, etc?
TWRP working? Bootloader is unlocked? If yes to both of those, you should be able to just adb push a ROM, or put one on removable SD with a card reader attached to your computer. Than flash the ROM in TWRP.
Click to expand...
Click to collapse
firstly i unlocked my bootloader via htcdev website then i installed twrp recovery successfully and then when i tried to root my phone by installing two zip files (mm-su-boot. & beta super su) i installed these two files and then tried to reboot my phone it opened in fastboot mode only . then i read here about the revolution hd rom installed it successfully but it does not reboot . help needed
farhanakhtar39 said:
firstly i unlocked my bootloader via htcdev website then i installed twrp recovery successfully and then when i tried to root my phone by installing two zip files (mm-su-boot. & beta super su) i installed these two files and then tried to reboot my phone it opened in fastboot mode only . then i read here about the revolution hd rom installed it successfully but it does not reboot . help needed
Click to expand...
Click to collapse
Your device is M8 dual SIM .. mm-su-boot is for M8 single SIM, won't work on your device.
Install custom ROM with support for Dual SIM or restore your stock ROM backup
please can you provide any link of the rom for dual sim addition
farhanakhtar39 said:
please can you provide any link of the rom for dual sim addition
Click to expand...
Click to collapse
Not so sure,
if Sense ROM - https://forum.xda-developers.com/htc-one-m8/development/rom-sense-6-12-401-4-mra58k-stock-t3296066
maybe S.ROM too has dual SIM support, you need to ask in their thread
https://forum.xda-developers.com/ht...the-worlds-first100-m9-port-m8upload-t3064838
if non-Sense ROM
CM13 ROM - https://forum.xda-developers.com/htc-one-m8/development/rom-cyanogenmod-13-0-experimental-t3259068
Nougat ROM -
https://forum.xda-developers.com/showthread.php?t=2753248
https://forum.xda-developers.com/htc-one-m8/development/rom-resurrection-remix-v5-8-0-t3507210
https://forum.xda-developers.com/ht...cyanogenmod-14-1-htc-one-m8-dual-sim-t3507192
There are a few more that support Dual SIM but you have to check & ask in their development thread as I'm not familiar with most of the available custom ROMs .. I don't try most of them
Thnks
Thanks buddy it worked
cm 13 worked for me !
God bless you
If I may jump in on this post and ask some advise my m8s is only booting to fastboot screen it has never been flashed, have tried recovery: nothing just goes back to fastboot, also wiped cache and factory reset: same result..... It has done this 2 times previous but only after restarting phone, usually repeatedly doing reboot it loads but it's been 2 days now and still only getting fastboot screen...plez help
My phone is having similar issues
Stanna16 said:
If I may jump in on this post and ask some advise my m8s is only booting to fastboot screen it has never been flashed, have tried recovery: nothing just goes back to fastboot, also wiped cache and factory reset: same result..... It has done this 2 times previous but only after restarting phone, usually repeatedly doing reboot it loads but it's been 2 days now and still only getting fastboot screen...plez help
Click to expand...
Click to collapse
I recently decided to root and install a custom rom on my old stock sprint HTC one m8. I unlocked the boot loader via HTC Dev website. I then flashed the TWRP recovery. Since doing the latter step, it's been booting into fast boot all the time! Did you ever figure out what was wrong with your phone?
pancho2009 said:
I recently decided to root and install a custom rom on my old stock sprint HTC one m8. I unlocked the boot loader via HTC Dev website. I then flashed the TWRP recovery. Since doing the latter step, it's been booting into fast boot all the time! Did you ever figure out what was wrong with your phone?
Click to expand...
Click to collapse
You only flashed TWRP onto the phone? Or did you root also?
Not nearly enough info to provide the proper help.
Please do fastboot getvar all, and post the results (delete IMEI and serial number before posting).
What version TWRP?
What version SuperSU did you flash (if you got that far)?

[Q&A] [Guide] [XAS] Xperia Unlocking bootloader, flashing ROMs/kernels (BPaul's 5.1.

[Q&A] [Guide] [XAS] Xperia Unlocking bootloader, flashing ROMs/kernels (BPaul's 5.1.
Q&A for [Guide] [XAS] Xperia Unlocking bootloader, flashing ROMs/kernels (BPaul's 5.1.1)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Guide] [XAS] Xperia Unlocking bootloader, flashing ROMs/kernels (BPaul's 5.1.1). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thanks
But the operation did not succeed with me banning comes from the start
From the beginning of the open( unlocking bootloader)
After the work steps is supposed to restore the device restarts itself
But doing a black screen remains
Until I unplug the (USB)
And open the phone itself
Can I ask you how I know the bot loader is opened؟
I may have missed it I I I don't know
Wait for a response from you, sorry if I ask too much
installing essential fastboot drivers doesn't occur
while Pressing and Holding volume up button and then connect usb to computer.
the blue led turn off after a short time and installing essential fastboot drivers doesn't occur
fadyashraf said:
while Pressing and Holding volume up button and then connect usb to computer.
the blue led turn off after a short time and installing essential fastboot drivers doesn't occur
Click to expand...
Click to collapse
That means your PC isn't installing fastboot drivers.
You have to install it manually. Just download below flashtool (also you'll need it later in final installation) (link below)
http://d-h.st/Kb8
Install it in your default PC drive.
Navigate to;
flashtool folder (default drive) > drivers > flashtool driver.exe > double click on it > next > fastboot drivers (at bottom of the list) install it and now connect your phone in fastboot mode.
Now follow and Complete popups for fastboot.
(If there's popup for MTP drivers, just cancel it)
After installation is finished Disconnect device and connect again in fastboot mode.
(VolUP and then connect USB )
If above process fails, let me know
Regards,
hitman-xda
---------- Post added at 02:09 AM ---------- Previous post was at 01:40 AM ----------
THEGAME2 said:
But the operation did not succeed with me banning comes from the start
From the beginning of the open( unlocking bootloader)
After the work steps is supposed to restore the device restarts itself
But doing a black screen remains
Until I unplug the (USB)
And open the phone itself
Can I ask you how I know the bot loader is opened؟
I may have missed it I I I don't know
Wait for a response from you, sorry if I ask too much
Click to expand...
Click to collapse
Actually I'm not getting what are you talking about.
If you can't get into fastboot mode (blue LED appears for few second and then continues charging with red LED) then just follow steps written in above post.
Regards,
hitman-xda
thanks again for your reply
[/COLOR]
Actually I'm not getting what are you talking about.
If you can't get into fastboot mode (blue LED appears for few second and then continues charging with red LED) then just follow steps written in above post.
Regards,
hitman-xda[/QUOTE]
All you ask him after the implementation steps
Fastboot
And write its own command on the computer terminates
After the execution of orders is the phone restart of work or I do I disconnect the USB
The complete installation process
How do I know that program fastboot has successfully steps
Please if you have any photos of the installation process to me
Or if a video is similar to the installation process
And thank you
THEGAME2 said:
All you ask him after the implementation steps
Fastboot
And write its own command on the computer terminates
After the execution of orders is the phone restart of work or I do I disconnect the USB
The complete installation process
How do I know that program fastboot has successfully steps
Please if you have any photos of the installation process to me
Or if a video is similar to the installation process
And thank you
Click to expand...
Click to collapse
Okay! So you are at the first step (UBL)
Answer few questions;
1. Which windows version are you using?
2. Do your phone successfully stay in fastboot mode?
(Power off > press volUP > connecting USB )
[Blue LED appears]
3. Did you get your Unlocking Bootloader Code from Sony site?
PS: when you successfully typed those three commands, your phone will auto reboot and bootloader will be unlocked.
To confirm that your bootloader is unlocked, you'll notice that your phone is factory resetted.
Also type *#*#7378423#*#* in dialer and find bootloader unlock status.
Regards,
hitman-xda
Thank you again
hitman-xda said:
Okay! So you are at the first step (UBL)
Answer few questions;
1. Which windows version are you using?
2. Do your phone successfully stay in fastboot mode?
(Power off > press volUP > connecting USB )
[Blue LED appears]
3. Did you get your Unlocking Bootloader Code from Sony site?
PS: when you successfully typed those three commands, your phone will auto reboot and bootloader will be unlocked.
To confirm that your bootloader is unlocked, you'll notice that your phone is factory resetted.
Also type *#*#7378423#*#* in dialer and find bootloader unlock status.
Regards,
hitman-xda
Click to expand...
Click to collapse
Answer your questions are
1- windos 7 32 bit
2-He succeeded in entering the fast mode and the blue led's
3-Yes were already official Sony website code to unpack the boot loader
The command has already provided written
Commands for fast boot
But the device did not restart itself and the system was as
Not a factory as I
And put the code that you wrote you this:*#*#7378423#*#*
service info _ configuration
boot loader unlock allowed: yes
That's exactly what I did I
THEGAME2 said:
Answer your questions are
1- windos 7 32 bit
2-He succeeded in entering the fast mode and the blue led's
3-Yes were already official Sony website code to unpack the boot loader
The command has already provided written
Commands for fast boot
But the device did not restart itself and the system was as
Not a factory as I
And put the code that you wrote you this:*#*#7378423#*#*
service info _ configuration
boot loader unlock allowed: yes
That's exactly what I did I
Click to expand...
Click to collapse
Everything looks fine. You can unlock your bootloader. Your bootloader isn't unlocked yet. Try again with the given steps one by one.
Hope you'll succeed
PS: Type those three commands carefully in minimal adb and fastboot after you connect your phone in fastboot mode)
If you got any error in command line, post it here
Regards,
hitman-xda
Thank you man
hitman-xda said:
Everything looks fine. You can unlock your bootloader. Your bootloader isn't unlocked yet. Try again with the given steps one by one.
Hope you'll succeed
PS: Type those three commands carefully in minimal adb and fastboot after you connect your phone in fastboot mode)
If you got any error in command line, post it here
Regards,
hitman-xda
Click to expand...
Click to collapse
Thank you man but your reply that I did not get anything
I have tried it twice and it didn't work
Thank you for your interest
THEGAME2 said:
Thank you man but your reply that I did not get anything
I have tried it twice and it didn't work
Thank you for your interest
Click to expand...
Click to collapse
When you connect your phone in fastboot mode and open minimal adb and fastboot and type the first Command (fastboot devices), did you get any error or it shows a connected device as shiwn in below pic
http://cdn.teamandroid.com/wp-content/uploads/2012/07/fastboot-devices-600x302.jpg
Regards,
hitman-xda
THANK YOU
hitman-xda said:
When you connect your phone in fastboot mode and open minimal adb and fastboot and type the first Command (fastboot devices), did you get any error or it shows a connected device?
Click to expand...
Click to collapse
I've tried to perform it twice
In the first gave me the mistakes
In the second time it did not give any mistakes
THEGAME2 said:
I've tried to perform it twice
In the first gave me the mistakes
In the second time it did not give any mistakes
Click to expand...
Click to collapse
If you are still not succeeded, maybe you should try it in other PC
I can't enter to cwm or twrp
Sorry for my bad english:
What I do after this???
7.Now select REBOOT DEVICE INTO SYSTEM.
8.Open your respected recovery (CWM or TWRP)
I can't enter to twrp and i can't install gaps =(
9.Install>your downloaded gapps from sdcard/ext_sdcard
10.Wipe cache + Dalvic cache + Factory reset
11.Reboot
cuti666 said:
Sorry for my bad english:
What I do after this???
7.Now select REBOOT DEVICE INTO SYSTEM.
8.Open your respected recovery (CWM or TWRP)
I can't enter to twrp and i can't install gaps =(
9.Install>your downloaded gapps from sdcard/ext_sdcard
10.Wipe cache + Dalvic cache + Factory reset
11.Reboot
Click to expand...
Click to collapse
If you have successfully performed every step till (7) and rebooted into system (7th step) , you shouldn't get any problem.
To enter into TWRP, reboot your device and when you see magenta LED press volUP button for couple of times, you'll successfully enter into TWRP.
Regards,
hitman-xda
Thank you again
hitman-xda said:
If you are still not succeeded, maybe you should try it in other PC
Click to expand...
Click to collapse
Is there another way to set the boot loader is not present or not
If I try and try to install the ROM again
Please, if you have pictures of the decoding process the boot loader that lifted me and I am very thankful to you
We looked at a lot of sites and didn't find results
THEGAME2 said:
Is there another way to set the boot loader is not present or not
If I try and try to install the ROM again
Please, if you have pictures of the decoding process the boot loader that lifted me and I am very thankful to you
We looked at a lot of sites and didn't find results
Click to expand...
Click to collapse
Nope! You can't skip bootloader.
There are some ROMs available that can be flashed with locked bootloader.
Soft bricking is the main drawback of flashing ROM on locked bootloader. Usually it happens once.
PS: I can't provide pics of steps. Its because I already unlocked my bootloader and I can't do it again.
Also I don't have another ACRO S.
I suggest you to unlock your bootloader using other PC to avoid bricking.
Regards,
hitman-xda
hitman-xda said:
That means your PC isn't installing fastboot drivers.
You have to install it manually. Just download below flashtool (also you'll need it later in final installation) (link below)
Install it in your default PC drive.
Navigate to;
flashtool folder (default drive) > drivers > flashtool driver.exe > double click on it > next > fastboot drivers (at bottom of the list) install it and now connect your phone in fastboot mode.
Now follow and Complete popups for fastboot.
(If there's popup for MTP drivers, just cancel it)
After installation is finished Disconnect device and connect again in fastboot mode.
(VolUP and then connect USB )
If above process fails, let me know
Regards,
hitman-xda
---------- Post added at 02:09 AM ---------- Previous post was at 01:40 AM ----------
Actually I'm not getting what are you talking about.
If you can't get into fastboot mode (blue LED appears for few second and then continues charging with red LED) then just follow steps written in above post.
Regards,
hitman-xda
Click to expand...
Click to collapse
I'll try this and let you know the result. Thanks again @hitman-xda.
thanks again
hitman-xda said:
Nope! You can't skip bootloader.
There are some ROMs available that can be flashed with locked bootloader.
Soft bricking is the main drawback of flashing ROM on locked bootloader. Usually it happens once.
PS: I can't provide pics of steps. Its because I already unlocked my bootloader and I can't do it again.
Also I don't have another ACRO S.
I suggest you to unlock your bootloader using other PC to avoid bricking.
Regards,
hitman-xda
Click to expand...
Click to collapse
This has happened with me in another attempt to install from another machine as I
View attachment 3342656
THEGAME2 said:
This has happened with me in another attempt to install from another machine as I
View attachment 3342656
Click to expand...
Click to collapse
Dude! You used brackets for the unlocking code. Just remove them and carry the process.
Also I written in the post that you shouldn't use brackets.
Regards,
hitman-xda
Permission to try again
hitman-xda said:
Dude! You used brackets for the unlocking code. Just remove them and carry the process.
Also I written in the post that you shouldn't use brackets.
Regards,
hitman-xda
Click to expand...
Click to collapse
You mean that my writing of the arches come on after she made the operation fail and the rest of the orders were correct

m8s root

Hi all I have tried to root the bootloader is unlocked but I can not install a recovery tried them both
I suspect it is the fastboot but they is no option to tick or untick it in the power options can anybody help
thanks
http://forum.xda-developers.com/showthread.php?t=3114245
I dir read them all page after page but to be honest im no wiser wish I had just got the m8
thanks
All info and needed files are in the opening post there. If something isn't working its at your end. Those files are proven to work.
got the files but im not sure how to usr htc fastboot
thanks
rayzor_uk said:
got the files but im not sure how to usr htc fastboot
thanks
Click to expand...
Click to collapse
Then you must stop now and learn what do and why you need it in the first place !
The commands are even there. I have the idea you don't read at all but just scroll over the text !
I have read it and read it copy the twerp recovery to phone use htc fastboot that's what I don't get run from computer or phone no instructions I can se for fast boot
why I want it is because I have no recovery it is there in the boot menu but when I go to it and press power button it switches phone of
I want it to root so I can install a custom rom I do know what I am doing I done the m7 I also have but this is proving difficult
thanks anyway
Cool, well why not ask there in the thread. And are there even custom roms for the m8s ? And why not fastboot flash it via command prompt ?!
cheers for help twerp now installed and rooted
cheers
rayzor_uk said:
I have read it and read it copy the twerp recovery to phone use htc fastboot that's what I don't get run from computer or phone no instructions I can se for fast boot
why I want it is because I have no recovery it is there in the boot menu but when I go to it and press power button it switches phone of
I want it to root so I can install a custom rom I do know what I am doing I done the m7 I also have but this is proving difficult
thanks anyway
Click to expand...
Click to collapse
Not sure if this will help, but occasionally I will forget the hyphen in fastbooot reboot-bootloader
It gives a quick "WTF?", and if you scroll up and read that "WTF?" you will see all of the fastboot commands that are available.

Help I bricked my Oneplus 3

Hi, i played around with my new OP3, and i wanted to root it. Since i'm noob at rooting, it went wrong. (i did it with twrp)
So first it just went in to bootloop, then i was still able to get to rcovery and stuff, but i followed a guide to fix bootloop, and that ****ed it even more up. The guide i followedet told me to use "OnePlus3_Unbrick_Tool"
After using "OnePlus3_Unbrick_Tool", i now cant even go into recovery anymore, the only thing i can do is go to bootloader, but when i'm in bootloader now, it wont connect proberly, so that i can use "flash twrp", so that i can use twrp recovery.
Also when i try to boot it, it because of "OnePlus3_Unbrick_Tool" goes into something, where it says "md5 checksum failed", and then restarts and does it again and again.....
I hope it's not bricked forever, pls help ))
have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.
bonham1988 said:
have you tried re-flashing the stock or twrp recovery adb sideload command?
Click to expand...
Click to collapse
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)
Godeske said:
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)
Click to expand...
Click to collapse
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs
bonham1988 said:
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?
Godeske said:
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?
Click to expand...
Click to collapse
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"
Godeske said:
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"
Click to expand...
Click to collapse
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?
ghostofcain said:
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?
Click to expand...
Click to collapse
Pretty sure i have, but i have booked a session with oneplus costumer service now, so that they do it for me live lololol
bonham1988 said:
have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.
Click to expand...
Click to collapse
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?
gavintoronto2016 said:
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?
Click to expand...
Click to collapse
Adb version is outdated. Just download the latest ones.
Sent from my OnePlus3 using XDA Labs
Hey guys, if there are some of you, who knows a lot about this, would you like to answer this comment? Idk maybe we could use teamviewer to help me or something
simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))
Godeske said:
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))
Click to expand...
Click to collapse
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Thank you, but i have not enabled "allow oem unlocking" in the developer settings when the phone worked, so i get a error message "FAILED (remote: oem unloc is not allowed)
What to do to unlock it then?
Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..
jaganmohans said:
Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..
Click to expand...
Click to collapse
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...
simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Hey i have the same problem but this fix does not work for me.
So I have the bootloader unlocked and I can enter the bootload and my computer detects my device which is nice.
when I flash twrp on my phone trough CMD it doesnt work, my PC tells me that everything is okay but my phone will not boot into twrp and instead it will give me weird errors.
---------- Post added at 03:31 PM ---------- Previous post was at 02:56 PM ----------
this fix worked for me,
On the screen when the phone failed to md5 checksum, you've got several partition failed right? in red text.
- download this : https://www.androidfilehost.com/?fid=24591000424942573
and then extract.
- download platform tools attached below. extract in the same folder with first file you've downloaded.
- Boot your phone to fastboot mode, plug your usb, make sure adb and fastboot driver are installed.
- on the folder, hold shift and right click, click open command here
- type fastboot devices
- make sure your serial number appear.
- now flash the img of the missing file according to the partition in red text on your ms5 checksum failed one by one.
- e.g. "fastboot flash boot_aging boot_aging.img.
- make sure you flash all the missing partition.
- type fastboot reboot.
this will boot you to oos 3.1.2.
unfortunately I couldn't extract the newest oos dat. data. but you could always take the OTA
goodluck mate. sorry for my english
Godeske said:
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...
Click to expand...
Click to collapse
Hmm bad try installing all op3 drivers and see whether phone is detected or not. I was in the same situation previously. Pushing zip through adp terminal is painful process. I got device offline first,after solving that i got service not recognized issue. For solving that usb debugging needs to be enabled i stuck in that step.
can you enter recovery trough fastboot mode? I.e. if you are in fastboot mode you van use the volume keys to select recovery.
100% sure you can't enter recovery?
you can try Fast and pro's option. let us know!

Categories

Resources