Develop Bugs

[Q] Please HELP, GSM Galaxy Nexus no signal, any SIM

Hello all,
It's been a week flashing ROMs, Radios, Kernels, many combinations and I can't get my Galaxy Nexus to work well. It's picking up AT&T signal sometimes, actually PERFECT reception near home, but then drops 100%
The SIM gets recognized, as the APN settings are correct.
The model I have is the i9250, Engineering model
Thank you for your help, I'm very frustrated

ferx1 said:
Hello all,
It's been a week flashing ROMs, Radios, Kernels, many combinations and I can't get my Galaxy Nexus to work well. It's picking up AT&T signal sometimes, actually PERFECT reception near home, but then drops 100%
The SIM gets recognized, as the APN settings are correct.
The model I have is the i9250, Engineering model
Thank you for your help, I'm very frustrated
Click to expand...
Click to collapse
Take a look at my thread here http://forum.xda-developers.com/showthread.php?t=1487239 and read through and try the combinations recommended. I PERSONALLY recommend the FuGuMod Kernel as it fixed my issues. See my signature for current set up. I use the UGKL1 Radio as well.
Please post your results in that thread as well as here.

Go back to stock 4.0.2 This should work, it normally does... Download it: Here...
It is a zip file, which contains the stock GNex ROM, everything should be back to normal

familyguy59 said:
Go back to stock 4.0.2 This should work, it normally does... Download it: Here...
It is a zip file, which contains the stock GNex ROM, everything should be back to normal
Click to expand...
Click to collapse
This may work as well but I have a feeling the OP is trying to use an AOSP 4.0.3+ ROM.
OP - Read my thread and give it a try. It has helped a few like you (INCLUDING MYSELF). What do you have to lose?

Even with radio and kernels I flashed> does it matter? :-(

ferx1 said:
Even with radio and kernels I flashed> does it matter? :-(
Click to expand...
Click to collapse
Try my exact setup and see what happens...
-FoxHound v1.0 ROM
-FuGuMod 4.0.3 Kernel
-UGKL1 Radio
Give it a try. This set up WORKS for me and the FoxHound ROM is quite nice as well.

yiannisthegreek said:
This may work as well but I have a feeling the OP is trying to use an AOSP 4.0.3+ ROM.
OP - Read my thread and give it a try. It has helped a few like you (INCLUDING MYSELF). What do you have to lose?
Click to expand...
Click to collapse
Thanks! I downloaded the stock 4.0.2 (link provided) and gave me error (aborted installation) I'll try the new combination now...

yiannisthegreek said:
Try my exact setup and see what happens...
-FoxHound v1.0 ROM
-FuGuMod 4.0.3 Kernel
-UGKL1 Radio
Give it a try. This set up WORKS for me and the FoxHound ROM is quite nice as well.
Click to expand...
Click to collapse
Recommended combination not working....

ferx1 said:
Recommended combination not working....
Click to expand...
Click to collapse
Really? Im sorry to hear that. There are some other combos listed there in my thread that have worked for others as well. Maybe try those...
I wish you good luck my friend...

got into stock 4.0.2, unrooted again. NOTHING, maybe antenna issues?

I just had your same problem. I tried any rom and stock flash, but NOTHING.
Then I tried doing "Fix permissions" in CWM recovery and after that PROBLEM SOLVED!
I imagine it's too late for you but maybe this solution could help in future

CM9 for LU6200

freefall12 already wrote info's about the CM9 version for LU6200 in the thread call record empty on 404 stock.
I really think we need an own thread for this.
http://bbs.fengbao.com/thread-997843-1-1.html
I downloaded and flashed it today and must say, very impressive.
But there are bugs no question, not suitable for daily usage now.
Guess if the nightly-time is over that could be a very good ROM.
Some issues i found for the short time i had it:
- Camera cant connect (closes with FC)
- Videoplayer freezes
But things i really like is the design and the languages where i can choose from.
One question, dont know if someone have a solution. Since i had to flash the engineer version of ICS to get root, is it possible to just flash the ICS and after that CM9 with root?

Yes, base on the engineer KDZ, not ICS KDZ.
In fact just need the bootloader based on engineer version.

i'm not sure what you want. but you can easily go back to official ICS using CWM recovery,without reflashing the whole kdz or the other way around. is that what you're asking for ?
---------- Post added at 01:07 PM ---------- Previous post was at 01:02 PM ----------
jxxhwy, i'm curious about what changes you've made to the CM9 kernel? thanks for the great work!

P930 github link
device:https://github.com/CyanogenMod/android_device_lge_p930
930 kernel:https://github.com/CyanogenMod/lge-kernel-iproj
based on the above compiled, modify some scripts files and kernel source file。

you just made some modifications to the kernel and no changes to the ROM? you compiled it on ubuntu 12.04 ? i'd be grateful if you elaborate!

CM9 is still not fix vibration & 3G.

freefall12 said:
i'm not sure what you want. but you can easily go back to official ICS using CWM recovery,without reflashing the whole kdz or the other way around. is that what you're asking for ?
---------- Post added at 01:07 PM ---------- Previous post was at 01:02 PM ----------
jxxhwy, i'm curious about what changes you've made to the CM9 kernel? thanks for the great work!
Click to expand...
Click to collapse
No, sorry if i didn't make it clear enough... if i go back to stock ICS, on the first LG bootscreen it still shows "engineer version".
Because i had to flash the engineer version (KDZ) before i flashed the ICS in order to get root and CWM after that.
So how does it work if i come from GB 2.3 to CM9... just flash the ROM in CWM?

Cromson said:
No, sorry if i didn't make it clear enough... if i go back to stock ICS, on the first LG bootscreen it still shows "engineer version".
Because i had to flash the engineer version (KDZ) before i flashed the ICS in order to get root and CWM after that.
So how does it work if i come from GB 2.3 to CM9... just flash the ROM in CWM?
Click to expand...
Click to collapse
if you upgrade to CM9 from GB,you will need to flash engineer version's mmcblk0p7 and ICS cwm recovery first.otherwise your phone probably will not boot and recovery will not work.that's because the mmcblk0p7 part is responsible for bootstrapping. hope i made myself understood!

OMG.. I thought CM9 would never come.. A Korean guy is also porting the AOKP to LU6200 and heard it's also in quite usable state. I'm restarting my phone to make a nand backup.

pins2u said:
OMG.. I thought CM9 would never come.. A Korean guy is also porting the AOKP to LU6200 and heard it's also in quite usable state. I'm restarting my phone to make a nand backup.
Click to expand...
Click to collapse
Thanks for the info! Do you have any link to the AOKP version, or is it not public now?
I really like the CM9, hope soon it will be stable. Right now if i connect via USB there is no dialog appearing, asking me to choose mass storage or any other option. My USB drivers are ok, it also connects without any problem in CWM.
An older version of this CM9 (19.06.2012) didn't have this issue.

jxxhwy said:
P930 github link
device:https://github.com/CyanogenMod/android_device_lge_p930
930 kernel:https://github.com/CyanogenMod/lge-kernel-iproj
based on the above compiled, modify some scripts files and kernel source file。
Click to expand...
Click to collapse
Greetings!
I saw RC is now released for p930, any updates for our LU6200?
Thank you for your efforts!

http://bbs.fengbao.com/forum.php?mod=viewthread&tid=997843&page=1&extra=#pid28312480

128firmware+143baseband ? Is this working well with CM9/ICS and is this because of the GPRS/Data Network issue?

Flashed it, but GPRS/Data is still not working for me.

Cromson said:
Flashed it, but GPRS/Data is still not working for me.
Click to expand...
Click to collapse
Cromson, do you have any issue with sms? no problem?
and do you know if p930 doesn't have any issue with vibration with their CM9?
---------- Post added at 02:39 AM ---------- Previous post was at 02:21 AM ----------
jxxhwy said:
http://bbs.fengbao.com/forum.php?mod=viewthread&tid=997843&page=1&extra=#pid28312480
Click to expand...
Click to collapse
Thank you!! Keep up the great work!

wifi not work with cm9 last build

SHaDoHaCK said:
wifi not work with cm9 last build
Click to expand...
Click to collapse
Wifi was working for me without problems. Also in the nightlies...

pins2u said:
Cromson, do you have any issue with sms? no problem?
and do you know if p930 doesn't have any issue with vibration with their CM9?
---------- Post added at 02:39 AM ---------- Previous post was at 02:21 AM ----------
Thank you!! Keep up the great work!
Click to expand...
Click to collapse
No issue with SMS so far, but i'm back to ICS now. If GPRS/DataNetwork would working, i would really use the CM9.
I have no clue about the P930 vibration issue.

Cromson said:
No issue with SMS so far, but i'm back to ICS now. If GPRS/DataNetwork would working, i would really use the CM9.
I have no clue about the P930 vibration issue.
Click to expand...
Click to collapse
with 0627 nightly I had wifi issue. I can't turn on the wifi. I'm also reverting back to ICS.

lu6200-cm9-20120702-NIGHTLY.zip
- unfortunatly still no working GPRS/DataNetwork

Can we port paranoid android ROM to our N2? With working s pen?

Sent from my SGH-T889 using xda premium

im not seeing any aosp action happening for the tmobile variant yet which is kinda disappointing but i do know a at&t version is being worked on and i tried it the other day, it's good and works for the most part. you just have to flash our radio after installing the rom. hopefully we will get some aosp/aokp roms soon enough.

Could you send me the link to that version?
Sent from my SGH-T889 using xda premium

fix-this! said:
im not seeing any aosp action happening for the tmobile variant yet which is kinda disappointing but i do know a at&t version is being worked on and i tried it the other day, it's good and works for the most part. you just have to flash our radio after installing the rom. hopefully we will get some aosp/aokp roms soon enough.
Click to expand...
Click to collapse
been kinda searching around the forums, but haven't come across a recovery flashable modem.. i've got the bin file to flash via odin or heimdall.. but haven't seen a zip anywhere..

pvtjoker42 said:
been kinda searching around the forums, but haven't come across a recovery flashable modem.. i've got the bin file to flash via odin or heimdall.. but haven't seen a zip anywhere..
Click to expand...
Click to collapse
Hey Joker.
And OP, PA is being merged with the latest fixes for CM10 in the ATT forums.
madmack got freaking everything working. What an update.

darkierawr said:
Hey Joker.
And OP, PA is being merged with the latest fixes for CM10 in the ATT forums.
madmack got freaking everything working. What an update.
Click to expand...
Click to collapse
Thanks Darkie.. been watching the CM10 thread on the AT&T side all day.. Been watching the PA thread as well.
nevermind.. found the modem.zip..

Have u guys seen this yet?
JellyBeer with Multi dpi groups
Wanna try flashing..
---------- Post added at 09:18 PM ---------- Previous post was at 09:16 PM ----------
darkierawr said:
Hey Joker.
And OP, PA is being merged with the latest fixes for CM10 in the ATT forums.
madmack got freaking everything working. What an update.
Click to expand...
Click to collapse
Hmm.. am I crazy? looking on the AT&T section and not seeing it..
EDIT: Unless this is it.. http://forum.xda-developers.com/showthread.php?t=1970335

decalex said:
Have u guys seen this yet?
JellyBeer with Multi dpi groups
Wanna try flashing..
Click to expand...
Click to collapse
Looks amazing, did you try it?

konceptz said:
Looks amazing, did you try it?
Click to expand...
Click to collapse
Going to flash in a few and see
Sent from my SGH-T889 using Tapatalk 2

decalex said:
Going to flash in a few and see
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Can't wait!
I'm assuming you flash in the proper fashion and then flash the t mobile modem?
Or are you going back to stock and then flashing forward?

konceptz said:
Can't wait!
I'm assuming you flash in the proper fashion and then flash the t mobile modem?
Or are you going back to stock and then flashing forward?
Click to expand...
Click to collapse
Yes.. the first one. No go tho without some other modification. Getprop fail in the script since not supported device..
Restoring nandroid now -- was gonna try flashing something else, but can't get my sdcard to mount (or adb to recognize) while in cwr.
---------- Post added at 11:50 PM ---------- Previous post was at 10:55 PM ----------
EDITs (abridged).
Flashed MIUI (just for kicks), odin'd modem (since flashable wasn't working).
Booted fine.. looked great. Everything seemed to be working, including S-Pen, except for Sound and calls (lol). Outgoing calls might have been working, but got no audio. Permissions manager was freaking out too.. tons of related FCs. Anyway.. was nice to see it on the Note 2.
Reading thru the thread now.. and see the permissions and calls are a known issue.

[Q] $100 to the man who fixes my wifi

nvm

Try another kernel ? Make sure you use aosp version of the kernel. What exactly is the problem with wifi ?
Sent from my GT-N7100

I tried the Zoot's wipe you suggested earlier, didn't fix the problem. Tried a few different kernels, all bootlooped.
The wifi takes a very long time scanning for networks, and won't connect to any network (unsecured, WEP, WPA, nothing). Works perfect on roms mentioned in first post, but not on 4.1.2 based PA.

Why do you want pa ? For per-app-dpi ? Well that can be done on normal phone also.
Sent from my GT-N7100
---------- Post added at 11:34 PM ---------- Previous post was at 11:29 PM ----------
You might want to take a look in Settings > Wi-Fi hit the Menu button again and choose Advanced and then make sure Keep Wi-Fi on during sleep is set to Always. Disable wifi timer.
Sent from my GT-N7100

do this 100 percent works
To insure this doesn't happen, just follow these steps:
1. Dial *#0011#
2. Hit the left menu softkey to bring up the menu, and select 'Wifi'
3. Turn OFF the 'Wifi Power Saving'
4. Exit, and Reboot
Where is my 100 dollar

nabilsweet007 said:
To insure this doesn't happen, just follow these steps:
1. Dial *#0011#
Click to expand...
Click to collapse
"Connection problem or invalid MMI code."

Did you try what I did ?
Sent from my GT-N7100

Try to change the flash root file. Look for cwm6-root-n7100 and flash it through Odin. It should work fine after that. Good Luck =D

Wow $100. Just trying to help only.
Odin back to original stock rom. Check all connection its ok or not.
Check ur note 2 version *#1234# and also imei *#06#.
Flash pa according to ur note2 version.
Check ur imei.
Flash kernel n modem based on ur note2 version.

I've tried all these things and none of them make wifi work for me on cm10 4.1.2 based roms. I don't think the problem is as simple as changing a setting or root/recovery, because simply flashing a different rom (TW 4.1.2 or 4.2 based PA) fixes the wifi issue entirely.
The $100 offer still applies to any developer who knows what the problem is and can provide files & specific instructions on how to fix the wifi connection issues I have with 4.1.2 based PA roms. Until then I'm gonna run an unofficial PA3 rom, with zero wifi issues.

Try this
First do a mega wipe.
Then flash the latest stock rom for your country.
Then do a mega wipe again.
Then flash aosp kernel(redpill or uneak)
Then flash pa .
Then flash gapps.
Try all the aosp kernels.
Try previous versions of the rom.
Try different versions of gapps.
Sent from my GT-N7100

UtkarshGupta said:
Try this
Click to expand...
Click to collapse
Please stop posting.

jakeordie said:
Please stop posting.
Click to expand...
Click to collapse
Why ? I am just trying to help.
Sent from my GT-N7100

I have a feeling you have the wrong kernel. Try finding the correct kernel for your baseband. Can you also take a screenshot of what is happening?
Sent from my GT-N7105 using xda app-developers app

stratex5 said:
I have a feeling you have the wrong kernel. Try finding the correct kernel for your baseband. Can you also take a screenshot of what is happening?
Click to expand...
Click to collapse
In Settings it says the baseband is N7100XXDLK7. This is probably because I've since flashed a stock rom from Dr. Ketan's thread. The label on the retail box says N7100ZNDXSG (but it doesn't say that's the baseband).
Are there AOSP kernels made for specific basebands?
Wifi works perfectly with every rom I've tried except anything CM10 4.1.2 based. The screen tear happened the same way with PA 2.99, and the same neak kernel fixed it, but there was never a problem with wifi on 2.99

Have you flashed isolated baseband from working rom?
If you have stock rom, extract tar and you will find modem.bin and flash it using odin for 'phone' tab
Just for safety make nandroid backup before it.
Sent from my GT-N7100 using xda premium

dr.ketan said:
Have you flashed isolated baseband from working rom?
Click to expand...
Click to collapse
Isolated, no. Are you saying that flashing a rom zip via CWM overwrites the existing baseband?
At this point, the unofficial PA 3.1 is working for me where the official PA 2.99 wasn't.....so the $100 offer is no more. Thanks everyone for trying to help me fix the problem, but now I've got the phone set up how I wanted with another rom.

jakeordie said:
Isolated, no. Are you saying that flashing a rom zip via CWM overwrites the existing baseband?
At this point, the unofficial PA 3.1 is working for me where the official PA 2.99 wasn't.....so the $100 offer is no more. Thanks everyone for trying to help me fix the problem, but now I've got the phone set up how I wanted with another rom.
Click to expand...
Click to collapse
There is no official pa for note 2.
Just ports.
Sent from my GT-N7100

jakeordie said:
Please stop posting.
Click to expand...
Click to collapse
That's rude. anyways try contacting other PA users , if they have the same problem there's something wrong with the rom, if its only you then something is wrong with the phone ( i had something like that back in s2 days and aokp, only my phone had wifi problems with it, other s2's worked good). and why not try this

UtkarshGupta said:
There is no official pa for note 2.
Just ports.
Click to expand...
Click to collapse
I was referring to this one http://forum.xda-developers.com/showthread.php?t=1970341, is it not official?
lesalloum said:
That's rude. and why not try this
Click to expand...
Click to collapse
I said please. Personally I think it's rude for someone to be giving advice when they don't know WTF they're saying.
Before I edited the OP, it said I had tried replacing the etc/wifi files from 4.1.1 and it didn't work.....maybe you missed that, no worries and thanks anyways.

Losing all the Baseband and Modem settings after flashing an AOSP ROM.

Good evening everyone. I recently got this phone from the Black Friday deal at Best Buy for 80$ and rooted and did all of that without much problem. I installed the Wicked ROM without any issues, and tested it out but I prefer AOSP. But when I flash Cyanogen or Bliss, I lose all of the mobile data , the baseband, here I include a screenshot. I have flashed a stock ROM once again, activated it again without any problem, but when I try to flash an AOSP ROM again I lose everything. Is there anything I can do about that? I have searched the forums and Google and found no solutions. Any help would be greatly appreciated.

Did you check to make sure that the md5 matched? Anytime I've had that happen either the md5 didn't match, or I needed to use a different kernel. My Goto kernel for AOSP ROMs has been BMS.

mattzeller said:
Did you check to make sure that the md5 matched? Anytime I've had that happen either the md5 didn't match, or I needed to use a different kernel. My Goto kernel for AOSP ROMs has been BMS.
Click to expand...
Click to collapse
Thanks for the tip, tried flashing Cyanogenmod with that kernel and the same thing happens, I lose all of the settings related to the Baseband, Modem and IMEI. I checked the md5 and it matches completely. I have no idea what is happening. For now I settled into the Conquest Singulalirty ROM which provides an ASJOP look but on offical firmware. But still I would like to know how to solve this problem so if anyone has any tips that would be greatly appreciated.

Is your phone the L710T model by any chance? I had the same problem with every rom I tried EXCEPT for Gummy 3.0. For some reason Gummy 3.0 recognizes my baseband/modem but if I try Gummy 4.0 or any other AOSP rom, no baseband.

Flash universal fix
luisro said:
Good evening everyone. I recently got this phone from the Black Friday deal at Best Buy for 80$ and rooted and did all of that without much problem. I installed the Wicked ROM without any issues, and tested it out but I prefer AOSP. But when I flash Cyanogen or Bliss, I lose all of the mobile data , the baseband, here I include a screenshot. I have flashed a stock ROM once again, activated it again without any problem, but when I try to flash an AOSP ROM again I lose everything. Is there anything I can do about that? I have searched the forums and Google and found no solutions. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Flash the file here: http://androidforums.com/threads/mo...apn-fix-wip-cm-aosp-4-4-x.840298/#post6516416
It will modify necessary files in the system to allow you to connect. Also, dial ##72786# to reactivate after flashing. That all worked for me on my Virgin S3 running Carbon. Good luck!

The SPH-L710T is what was on sale at BestBuy for $80 (as I found out after running into a similar problem), and it's a pain in the ass. It seems that TW ROMs are the only ones that don't break the radio... and the M10 snapshot of CM11 apparently (except rotation is backwards). I'm looking for a fix as well.
It seems that all of this can be fixed by a custom kernel, but there's no AOSP/CM kernel (that I know of) that fixes both.
I wish I knew something about kernel development...

kdude63 said:
The SPH-L710T is what was on sale at BestBuy for $80 (as I found out after running into a similar problem), and it's a pain in the ass. It seems that TW ROMs are the only ones that don't break the radio... and the M10 snapshot of CM11 apparently (except rotation is backwards). I'm looking for a fix as well.
It seems that all of this can be fixed by a custom kernel, but there's no AOSP/CM kernel (that I know of) that fixes both.
I wish I knew something about kernel development...
Click to expand...
Click to collapse
That is exactly the one that I have, the 80$ Best Buy from Black Friday. Yeah, I tried what metalhead131 said and it did not work. Hmmm, M10 snapshot worked for you? I will try it out them to see how it goes. In what way did it break the rotation? It does not rotate or is it inaccurate? It is a pain in the ass that we have so many ROMS available but we can't use them. I have been using the Conquest Singularity by Moon Knight. The one that is here in XDA is kinda of outdated but if you Google it you will find his blog with the latest update. He created an AOSP looking ROM but it is TW underneath. That combined with Gravity Box has satisfied me for now, but I hate no being able to flash AOSP ROMS. I know nothing about kernel development, but if someone wants to help with this I can provide anything they need in order to fix this problem with this T version of the phone.
I will try to take the kernel of the M10 and flash it with another ROM to see if the rotation works. I will update as soon as I do that.

luisro said:
That is exactly the one that I have, the 80$ Best Buy from Black Friday. Yeah, I tried what metalhead131 said and it did not work. Hmmm, M10 snapshot worked for you? I will try it out them to see how it goes. In what way did it break the rotation? It does not rotate or is it inaccurate? It is a pain in the ass that we have so many ROMS available but we can't use them. I have been using the Conquest Singularity by Moon Knight. The one that is here in XDA is kinda of outdated but if you Google it you will find his blog with the latest update. He created an AOSP looking ROM but it is TW underneath. That combined with Gravity Box has satisfied me for now, but I hate no being able to flash AOSP ROMS. I know nothing about kernel development, but if someone wants to help with this I can provide anything they need in order to fix this problem with this T version of the phone.
I will try to take the kernel of the M10 and flash it with another ROM to see if the rotation works. I will update as soon as I do that.
Click to expand...
Click to collapse
Yeah, the radio worked with the M10 snapshot. I was able to get the latest version of ParanoidAndroid to work with the M10 snapshot kernel as well.
When I say rotation is broken I mean when you hold it sideways, it rotates the wrong way, so it's upside down.

kdude63 said:
Yeah, the radio worked with the M10 snapshot. I was able to get the latest version of ParanoidAndroid to work with the M10 snapshot kernel as well.
When I say rotation is broken I mean when you hold it sideways, it rotates the wrong way, so it's upside down.
Click to expand...
Click to collapse
Excellent. Thanks for the good news! That doesn't bother me that much, so I will do that with the Bliss ROM that I wanted to install. I will keep investigating and trying things to see if we can fix the rotation issue. I will keep the thread updated.

Semi-Fix for the rotation issue on the M10 kernel.
After checking some apps out, I found one that worked well for the rotation problem using AOSP ROMS on the troublesome SPH-L710T. The app is called Adaptive Rotation Lock and is available for free on the Play Store. What it does is that a little button pops up everytime you rotate your phone, and if you don't click that button the screen will not rotate. So once you put your phone horizontallly, click on the button that pops up to allow the phone to rotate upside-down, then rotate the phone so it is not upside-down anymore, but do not click the button, so it stays in the correct rotation. It is a little cumbersome, but it beats always being upside down while using the phone horizontally! I think this is a good option while we find out how to fix this issue in the kernel.

kdude63 said:
Yeah, the radio worked with the M10 snapshot. I was able to get the latest version of ParanoidAndroid to work with the M10 snapshot kernel as well.
When I say rotation is broken I mean when you hold it sideways, it rotates the wrong way, so it's upside down.
Click to expand...
Click to collapse
Greeting kdude63. Thanks to your tips I was able to test many roms and as you settled on Paranoid Android. The only problem I have right now is that intermittently point I lose cell coverage for like 2 minutes, but then I get it back. Does that happen on your phone?
I have also tried many kernels to see if I find another one that works but no go. I am still using the M10 boot.img. Have you found another one that works?
And thanks for helping out with the ODIN tar for this phone! It makes me feel a lot more safe when I am experimenting.
Sent from my SPH-L710 using XDA Free mobile app

luisro said:
Greeting kdude63. Thanks to your tips I was able to test many roms and as you settled on Paranoid Android. The only problem I have right now is that intermittently point I lose cell coverage for like 2 minutes, but then I get it back. Does that happen on your phone?
I have also tried many kernels to see if I find another one that works but no go. I am still using the M10 boot.img. Have you found another one that works?
And thanks for helping out with the ODIN tar for this phone! It makes me feel a lot more safe when I am experimenting.
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
I don't currently use PA or CM as my daily driver, so I don't know. (I don't like dealing with the rotation issues)
I was testing some other kernels earlier, none of them worked before I got careless and accidentally flashed an i9300 kernel, so I can't use my phone for the time being.

Cnexus and several others have posted debrick images and stock ROMS for various versions of the s3. Good luck debricking
Sent from my CarbonROM 4.4.4 SPH-L710

luisro said:
Good evening everyone. I recently got this phone from the Black Friday deal at Best Buy for 80$ and rooted and did all of that without much problem. I installed the Wicked ROM without any issues, and tested it out but I prefer AOSP. But when I flash Cyanogen or Bliss, I lose all of the mobile data , the baseband, here I include a screenshot. I have flashed a stock ROM once again, activated it again without any problem, but when I try to flash an AOSP ROM again I lose everything. Is there anything I can do about that? I have searched the forums and Google and found no solutions. Any help would be greatly appreciated.
Click to expand...
Click to collapse
wait you had success flashing wicked????? which one????? that's my favorite rom I'm running Conquest at the moment tried to flash Wicked X bare-bones on the new T model but it didn't work sadly :'(
---------- Post added at 03:06 PM ---------- Previous post was at 02:54 PM ----------
metalhead131 said:
Cnexus and several others have posted debrick images and stock ROMS for various versions of the s3. Good luck debricking
Sent from my CarbonROM 4.4.4 SPH-L710
Click to expand...
Click to collapse
The debrick image for the T model was just barely posted last week in Android Forms....and there is a thread in the questions section here on XDA that has it linked

6th_Hokage said:
wait you had success flashing wicked????? which one????? that's my favorite rom I'm running Conquest at the moment tried to flash Wicked X bare-bones on the new T model but it didn't work sadly :'(
---------- Post added at 03:06 PM ---------- Previous post was at 02:54 PM ----------
The debrick image for the T model was just barely posted last week in Android Forms....and there is a thread in the questions section here on XDA that has it linked
Click to expand...
Click to collapse
Yep, I flashed it normally. Using Philz I got the Wicked 8 zip file and a couple of the addons that are available without any problems but since I don't like the Touchwiz UI too much I am currently running Conquest. Maybe try the full Wicked 8 zip? I did not try the barebones, but I can confirm that Wicked 8 works on the T model. It has the rotation issue but a couple of post ago I described how to get around that. Let me know if it works!
Sent from my SPH-L710 using XDA Free mobile app

luisro said:
Yep, I flashed it normally. Using Philz I got the Wicked 8 zip file and a couple of the addons that are available without any problems but since I don't like the Touchwiz UI too much I am currently running Conquest. Maybe try the full Wicked 8 zip? I did not try the barebones, but I can confirm that Wicked 8 works on the T model. It has the rotation issue but a couple of post ago I described how to get around that. Let me know if it works!
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
i was finally able to flash bare-bones i had to flash the updated kernel i used for Conquest beta 10

I'm glad! At least we can use Touchwiz based ROMs while we can find a way to create a kernel that is completely compatible with the T model. Is your rotation working correctly?
Sent from my SPH-L710 using XDA Free mobile app

luisro said:
I'm glad! At least we can use Touchwiz based ROMs while we can find a way to create a kernel that is completely compatible with the T model. Is your rotation working correctly?
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
Yes rotation is working and with the next few updates on CM side they will be fully working on the T model cause CM already updated a fix for the T model

I got spooked when the baseband disappeared and rotation was not working. Went back to stock. Of course you also seem to need the special 2.7 twrp in order to mount system. But the price was right.
Sent from my SPH-L710T using XDA Free mobile app