OK...
The locks on my phone are very redundant to say the least.
In order to get to my home screen I have to do the following:
1. Press the button on top of the phone.
2. Slide the first lock down.
3. Draw in my security code to get past the lock out.
Step 3 can be shut on and off but I like this security so people can't mess with my phone. However considering I have to do step 1 before and step two also, it seems a tad over kill.
Can I disable step 2, the slide down lock screen?
Basically when I press the button on the top of the phone I want to be RIGHT at the screen where I draw in my lock pattern and or hit emergency call. I was unable to find anything in the settings. Did I miss it or is it really not there? If it's not there is there any other way to do it?
I'll fully rooted if that helps.
Try "No Lock" in the Market. It gets rid of the lock screen (and has a toggle widget). Not sure the effect on the security though.
No Lock gets rid of both the slide to unlock and the security passcode entry. Very handy if you don't care about security, but you get your mail from an Exchange server and they force you to have a security password.
Don't know how to just get rid of the slide to unlock.
i have a droid incredible with the same setup..sorta...i am running virtuous2.7
have u found a way to do this without No Lock?
You can do exactly what you're asking for with Switch Pro widget
nebenezer said:
You can do exactly what you're asking for with Switch Pro widget
Click to expand...
Click to collapse
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
snovvman said:
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
Click to expand...
Click to collapse
Would like to know, as my buddy was asking me about this.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
If you use cyanogen rom, add power control widget and add the lockscreen option. Any time that widget is off when you hit the power button to unlock the phone you will go straight to pattern lock or home screen if you don't have one.
Sent from my PC36100 using XDA App
I would pay for an app/widget that handled this...
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
deathsled said:
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
Click to expand...
Click to collapse
I'm aware of this mod. People should be aware that you will need root access to delete the file. At the same time, I read that even with the AOSP/standard/vanilla lock screen, it (the standard lock screen) does NOT go away when the pattern lock is ENABLED.
For the Nexus 1, the standard lock DOES go away when pattern is ON, but it does not seem so with the Evo.
Can someone verify/dispute?
Thanks.
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
CzarMatt said:
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
Click to expand...
Click to collapse
Thanks. 1st post for CzarMat!!! Exactly my point--we need to find a way to make the Vanilla lock go away when pattern lock is enabled. But how??
This is all a bit redundant if the OP has Exchange security enabled on his device, which he has yet to clarify (unless I missed something).
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
is there any way to edit or app that enables a longer time period before the lock pattern screen comes up? LIke i think the max is like 15min
I want to be able to at least set the lock pattern screen to a 1hr interval, maybe 2hr
is this possible somehow?
Well, you can hit the "menu" capacitive button instead of sliding for a quicker unlock to the pattern security screen. That's what I normally do since it's a bit of finger acrobactics from the power button->aosp slide unlock->pattern screen.
jaypeezee said:
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
Click to expand...
Click to collapse
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
CzarMatt said:
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
Click to expand...
Click to collapse
Excellent news! Still looking for a solution. I think simulating a "menu" press will unlock the screen. Looking foward to it. Thanks!!
anyone come up with a solution for this?
Hello everyone,
i am rather new to my GNex, till last week i had an N1 and was happy with it.
I am really happy with the new ICS/JB lockscreen enabling me to start the camera from the lockscreen and accessing google now from there, but its lacks the securety of any pin.
if i choose pin, password or gesture under securety the "normal" lockscreen is gone and i am presentet immediantly with the screen to enter my PIN.
with my N1 i first had to swipe to unlock the phone and then enter my PIN, my wife has an HTC One S and ist still has the same behavior.
is there any way to get that behavior back? as of right now i either have to choose the confort of the new lockscreen without any securety and0 give anyone getting hold of my phone full access, or the securety of a PIN without any confort.
as it is right now i can not even take my phone to work having the normal lockscreen enable and have to worry about everyone can use the phone when he finds it.
patlabor said:
Hello everyone,
i am rather new to my GNex, till last week i had an N1 and was happy with it.
I am really happy with the new ICS/JB lockscreen enabling me to start the camera from the lockscreen and accessing google now from there, but its lacks the securety of any pin.
if i choose pin, password or gesture under securety the "normal" lockscreen is gone and i am presentet immediantly with the screen to enter my PIN.
with my N1 i first had to swipe to unlock the phone and then enter my PIN, my wife has an HTC One S and ist still has the same behavior.
is there any way to get that behavior back? as of right now i either have to choose the confort of the new lockscreen without any securety and0 give anyone getting hold of my phone full access, or the securety of a PIN without any confort.
as it is right now i can not even take my phone to work having the normal lockscreen enable and have to worry about everyone can use the phone when he finds it.
Click to expand...
Click to collapse
The easiest way to fix this would be to use a third party lockscreen, I've hear 'GO Locker' offers what you're after.
Or get an app lock application and choose which apps you need a password for. I personally like app locker pro. You can choose pin or pattern locks, whichever you prefer.
Sent from my Sprint Galaxy Nexus CDMA using xda app-developers app
I just got a Note 2 for AT&T, I rooted, flashed Team Asylums slim and fast ROM, and everything was been awesome until... I decided to set up a pattern unlock, and did. But I lost my lock screen shortcuts so I decided to remove the pattern. When I go into setting and enter my patter again I only have the option to enter a new pattern, a pin or a password -- the none, slider and face option are grayed out **see picture below** Any ideas?
Is your device encrypted?
No I do not have it encrypted and it is not an administrator issue, I think it is related (aside from my stupidity) to a VPN app (open VPN for android) that I started setting up but deleted before I finished. I'm guessing it left a security certificate in the system that is preventing me from going without a secure lock screen. I think it is time to swallow my pride/factory wipe and stop goofing around with settings I don't understand.
Sent from my GT-N7105 using xda app-developers app
Before installing the new Kit Kat upgrade, I had no password and was able to press the top power button to awaken or sleep the home screen without also having to swipe the little "lock" icon upward. With the new updated software, I now have to swipe the little lock every single time. So now I have two steps to complete before accessing my phone. Does anyone know how to remove it?
The first two options in the settings / security menu.
No Lock app
No Lock has been working for me: https://play.google.com/store/apps/details?id=org.jraf.android.nolock&hl=en
I'm rooted but running stock rom.
Blair
cmlusco said:
The first two options in the settings / security menu.
Click to expand...
Click to collapse
I have no screen lock at all on those settings and I still have to swipe to get to my home screen. This was removable in the previous update.
Huh? Set the first option to what kind of lockscreen you want pin pattern etc. Then put a check on the second option. This should bring up the security screen when the phone first wakes, then once you enter your pin pattern etc it should go straight to your home screen.
cmlusco said:
Huh? Set the first option to what kind of lockscreen you want pin pattern etc. Then put a check on the second option. This should bring up the security screen when the phone first wakes, then once you enter your pin pattern etc it should go straight to your home screen.
Click to expand...
Click to collapse
I do not want to have to swipe the "lock" icon. I never needed to before and now with KitKat I do. I'm wondering whether there is a way to remove that little feature.
These are my current settings.
I have no pin or lock, yet I still have to swipe the little lock up before accessing my home screen. Is there a way to go straight to my home screen without having to swipe the lock icon up?
That is very strange. I have the same settings for mine, screen lock none and the bypass lockscreen on wake box checked. When my phone is off and i hit the power button it goes straight to my home screen, no lock swipe involved.
Are you rooted?
cmlusco said:
That is very strange. I have the same settings for mine, screen lock none and the bypass lockscreen on wake box checked. When my phone is off and i hit the power button it goes straight to my home screen, no lock swipe involved.
Are you rooted?
Click to expand...
Click to collapse
Ditto. There must be something messed up with his rom or some app interfering with the settings.
There is also a setting for skipping the lock screen in the Sense 5 Toolbox so you could try that too if you're rooted and have Xposed.
No i think the reason it does this for me is because i have sense 5 toolbox and never realized it was an always on option. If your rooted, and dont want xposed or sense 5 toolbox, i made a flashable zip that will remove the lock screen.
http://forum.xda-developers.com/showthread.php?t=2642574
I'm not rooted.
Sent from my HTC6500LVW using xda app-developers app
Well then either root, or as stated in an earlier post try no lock from the market. Its free and does not require root.
Hi,
Under screen lock I marked swipe.
It stopped working.
When I press the lock button, the screen just appeared like the none option is marked although the swipe is marked.
I have tried the following:
Restart
Shut down
Change user to guest
Clear credentials
Change to password and change back
After changing to password go to smart lock and make sure there are not trusted places
After changing to swipe the smart lock option is grey like it is set to None.
Any ideas?
Thanks
I recently updated to the latest ElementalX kernel (1.15) and am experiencing the same issue, lock button doesn't lock or wake up screen, gestures work fine though.
Edit: After hard resetting the lock & wake functionality is back to normal!