Trying to figure it out turn off 4g on status bar. ... my current version of tmobile note 2 is 4.1.1 which shows current version (true current version is 4.2.1 I believe)
Anyone has 4.2.1 tmobile note2?
if you meant 4.1.2 then not yet
Related
I am assuming d2att is based on AT&T version of I747M,
I have Rogers version of I747M. can I install CM9 or CM10 on it?
and is there clean jelly bean build released for I747M?
hahmjt said:
I am assuming d2att is based on AT&T version of I747M,
I have Rogers version of I747M. can I install CM9 or CM10 on it?
and is there clean jelly bean build released for I747M?
Click to expand...
Click to collapse
Yes but you may run into lte issues
Lte is working fine for all the Canadian i747M gs3's in the current versions of both CM9 and CM10
Sent from my Bell I747M Galaxy S III
Yup I'm running CM9 on my phone and I am with Rogers. Sadly the area I am in Calgary is not covered my LTE, so I can't tell you how well it works. I know I can connect to lte but it is usually while I am driving.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
So there is no issues so far with the ROM on Bell Galaxy SIII?
taiwanese said:
So there is no issues so far with the ROM on Bell Galaxy SIII?
Click to expand...
Click to collapse
Well no issues that aren't present on the AT&T version also...
CM9 has derpy camera
CM10 has various bugs still
If there is 100 threads about this I'm sorry I swear I searched.
Is there any STOCK pretty much JellyBean ROMS for the Verizion Nexus? I have the GSM Version so I only really know mine but I told my friend I would put JellyBean on his Verizon Nexus and just figured I could put Android Revolution HD on it and be done but the LTE Verzion Version of this ROM seems to still be ICS despite being labeled 4.1.1. Is there any ROMS like this that are Stock based or just all ASOP/CM. And if not which ASOP/CM mod has the closest STOCK look...?
Look around.
There is no pure stock version but very close custom ROMs.
BTW, Android Revolution is a 4.0.4 ROM and says it in the description, the version number of the ROM itself is 4.1.1 ironically.
Sent from my Galaxy Nexus using Tapatalk 2
Hi
Upgraded to Jelly Bean 4.1.2 using Wugfresh's excellent Toolkit.
Stock baseband that came with the Wind GNex was Android 4.1.1 running UGLH1. After upgrading to 4.1.2 Stock Yakju build, the baseband changes to XXFL1 - which i assume is the same version as ICS.
So far seems reception is fine. Mostly in Toronto North York area I receive 3 bars signal and switching frequently between 3g/HSPA+.
Wondering from fellow Canadian WIND / AWS users if they have experienced any issues using XXFL1 radio baseband on Jelly bean 4.1 or what the best radio to flash is ?
cheers
Mike
Read through this, see what works for others on your carrier in your location. You will get many answers. You will have to test them all to find which one is BEST for YOU. No one else can answer that but you.
http://forum.xda-developers.com/showthread.php?t=1405345
Hey guys,
I am thinking to try paranoidkangdroid 4.2.2 ROM for galaxy s3 AT&T. but my phone is still running 4.1.1 and there is no update for the at&t yet for 4.2.
I searched whether 4.2.2 rom will work for at&t or not and got the ans saying NO but there will be soon.
so if they release that and if my phone is still running 4.1.1 will i still be able to install the 4.2.2 rom in my phone?
i tried finding the requirments but couldn't find one.
thank you.
siven91 said:
Hey guys,
I am thinking to try paranoidkangdroid 4.2.2 ROM for galaxy s3 AT&T. but my phone is still running 4.1.1 and there is no update for the at&t yet for 4.2.
I searched whether 4.2.2 rom will work for at&t or not and got the ans saying NO but there will be soon.
so if they release that and if my phone is still running 4.1.1 will i still be able to install the 4.2.2 rom in my phone?
i tried finding the requirments but couldn't find one.
thank you.
Click to expand...
Click to collapse
Anyways as a matter of fact, all Custom ROMs for AT&T Galaxy SIII is in the Development section here: http://forum.xda-developers.com/forumdisplay.php?f=1705
I'm still not sure whether you need official Samsung/AT&T update to 4.2.2 in order to try custom ROMs. Anyways I'll flag the Moderator to move this Thread to AT&T Galaxy SIII section, so that people using this device can give you a better suggestion.
siven91 said:
Hey guys,
I am thinking to try paranoidkangdroid 4.2.2 ROM for galaxy s3 AT&T. but my phone is still running 4.1.1 and there is no update for the at&t yet for 4.2.
I searched whether 4.2.2 rom will work for at&t or not and got the ans saying NO but there will be soon.
so if they release that and if my phone is still running 4.1.1 will i still be able to install the 4.2.2 rom in my phone?
i tried finding the requirments but couldn't find one.
thank you.
Click to expand...
Click to collapse
Your stock firmware doesn't really affect what you have to do with flashing a new ROM. I have the i747 as well (on 4.1.1 stock) and i flashed Cyanogenmod 10.1 nightlies (4.2.2) pretty easily. You don't need to worry about what you have right now. Just make sure you back up the ROM and follow all the procedures for installing a new one.
BTW AT&T (or Samsung for all that matters) probably won't release 4.2 at all. It's only out for the Nexus devices at the moment. The only way is to flash a new ROM right now.
and yes, you WILL be able to install 4.2.2, even if you're running 4.1.1 on your stock firmware. (Just make sure to backup in case anything goes wrong!) Your new ROM is not dependent on your old one
here's the thing
4.1.2 came out for S3 international ~4 months ago, U.S S3 yet have yet to have it
and there's no real date when they'll even release 4.1.2
so how long do you think we'll able to get an official version of 4.2.1? and then 4.2.2?
pcshano said:
here's the thing
4.1.2 came out for S3 international ~4 months ago, U.S S3 yet have yet to have it
and there's no real date when they'll even release 4.1.2
so how long do you think we'll able to get an official version of 4.2.1? and then 4.2.2?
Click to expand...
Click to collapse
4.1.2 began slowly rolling out barely 3 months ago on the international variant. one of the features is the multi-view. as has been covered already, this affects the US variants as we have dual core phones vs the i9300s quad. we wont see a 4.1.2 firmware release.
i dont see any real carrier-published updates for the US models until the release of the s4
xBeerdroiDx said:
4.1.2 began slowly rolling out barely 3 months ago on the international variant. one of the features is the multi-view. as has been covered already, this affects the US variants as we have dual core phones vs the i9300s quad. we wont see a 4.1.2 firmware release.
i dont see any real carrier-published updates for the US models until the release of the s4
Click to expand...
Click to collapse
actually there will be 4.1.2 for U.S s3
it's just some features that you saw on international (multi-view, etc..) won't be there for us
pcshano said:
actually there will be 4.1.2 for U.S s3
it's just some features that you saw on international (multi-view, etc..) won't be there for us
Click to expand...
Click to collapse
So then it's not the same 4.1.2 release as people have been inquiring about. And I still say the US S3 won't see a major update until the S4
xBeerdroiDx said:
So then it's not the same 4.1.2 release as people have been inquiring about. And I still say the US S3 won't see a major update until the S4
Click to expand...
Click to collapse
even if they update, i don't really care anyways...
touchwiz just isn't for me... i rooted my phone the 2 or 3 days after i got the phone ;p
Hi all,
I rooted my Rogers S3 then installed with CM4.1.2 last week then updated to 4.1.3. I've noticed since I updated to 4.1.3 that my 4G signal maxes out at 2 bars. So am wondering if the ATT rom that is used has a different baseband file then Rogers? And if so, is it possible to install a Rogers baseband back onto the phone some how?
Thanks...
Pretty sure there is no android 4.1.3 version. And there is a thread with flashable modems u can try...