Develop Bugs

TouchWiz plus JB combo?

Hey guys, is it possible to combine these two ROMs? As in, add sounds and wallpaper to a jellybean ROM? As a test, I saved the deep sea live wallpaper from TouchWiz on my SD card and then tried to install on JB. It didn't work. Also tried saving the alarms, ringtones, and sounds from TouchWiz on the SD card and then moving them back into system while on JB. didn't work, and my phone crashed. I understand that Samsung apps will not run on a JB rom, but this also applies to the sounds and live wallpapers as well?
I love TouchWiz features , but think JB is a much snappier ROM. It would be great to see a combo ROM.

No one is going to spend the time or resources to do such a thing. Sorry bud but don't keep your hopes up. The probability of this happening is slim to none.
Sent from my SPH-L710 using xda premium

mrg02d said:
Hey guys, is it possible to combine these two ROMs? As in, add sounds and wallpaper to a jellybean ROM? As a test, I saved the deep sea live wallpaper from TouchWiz on my SD card and then tried to install on JB. It didn't work. Also tried saving the alarms, ringtones, and sounds from TouchWiz on the SD card and then moving them back into system while on JB. didn't work, and my phone crashed. I understand that Samsung apps will not run on a JB rom, but this also applies to the sounds and live wallpapers as well?
I love TouchWiz features , but think JB is a much snappier ROM. It would be great to see a combo ROM.
Click to expand...
Click to collapse
Sounds and wallpapers are totally possible just did it myself in about 5 mins from the phone. got the tw sounds and original wallpapers on my jb rom right now. So definatley possible at least in part. I'd says sound and wallpapers a deffinate go

billard412 said:
Sounds and wallpapers are totally possible just did it myself in about 5 mins from the phone. got the tw sounds and original wallpapers on my jb rom right now. So definatley possible at least in part. I'd says sound and wallpapers a deffinate go
Click to expand...
Click to collapse
Awesome. How did you do it? I tried and failed. I was using root explorer.

mrg02d said:
Awesome. How did you do it? I tried and failed. I was using root explorer.
Click to expand...
Click to collapse
Root explorer for most of the sounds then my thumb got tired so just made a zip to do it all for me.its kinda half assed but the stock wallpaper apps showed up and the sounds worked after renaming a few. I'll upload the zip if u wanna flash and see if were on the same page
http://db.tt/MJYl88QP

kram4362 said:
No one is going to spend the time or resources to do such a thing. Sorry bud but don't keep your hopes up. The probability of this happening is slim to none.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Time + resources =about 10 minutes, a phone w/ root explorer/windows PC w/7zip. Not exactly rocket science. Hell took longer to upload to my dropbox on this God awful network then it did to throw it 2gether

Thanks for the zip. Everything works but I have to reinstall the deep sea live wallpaper each time I reboot. Anything else I need to do? I tried wiping dalvik and cache as well as fixing permissions.

mrg02d said:
Thanks for the zip. Everything works but I have to reinstall the deep sea live wallpaper each time I reboot. Anything else I need to do? I tried wiping dalvik and cache as well as fixing permissions.
Click to expand...
Click to collapse
Can't say for sure as I'm not having that problem but try to install this normally and see if it works/sticks. Just a shot in the dark..
http://db.tt/c4vB7Ngp

billard412 said:
Can't say for sure as I'm not having that problem but try to install this normally and see if it works/sticks. Just a shot in the dark..
http://db.tt/c4vB7Ngp
Click to expand...
Click to collapse
After dirty flashing the cm10 8/12 build, the wallpaper sticks and works good.
Now for a new feature... Haptic feedback. I hate how heavy cm10 haptic feedback is. Is this something that can be adjusted or moved from tw?

[ROM][2.2.1][Sense]AnthraX - "Resistance is futile, you will be intoxicated"[BETA]

[ROM][2.2.1][Sense]AnthraX - "Resistance is futile, you will be intoxicated"[BETA]
AnthraX - "Resistance is futile, you will be intoxicated"
Ported from:
Using Flykernel 13
Ported from HTC Hero CDMA froyo ROM by zenulator = http://forum.xda-developers.com/showthread.php?t=834840
Problems:
GPS
Camera, open and see, it takes awsome pictures, artistic...
Notification LED and buttons backlight aren't working
Power menu shut down wont actually shut down the phone (LOL)
It'd be cool to have a reboot to recovery, fastboot menu..
Report if you notice any more bugs
If there are any devs that know how and are willing to fix some of these bugs, be my guest, if you manage to fix them post a patch and I'll incorporate them into the ROM
How to install:
---Download the rom and put it on your SD card
---Reboot to clockworkmod
---Wipe data, wipe cache
---Go to advanced tab/Wipe dalvik cache
---Flash the ROM
---Reboot and say hello to your new ROM
Tips:
Get Antutu CPU Master from market and overclock as much as you can, like always, change governor to smartassV2..
Get Spare Parts from market, open Spare parts, window animations and transition animations, set both to very slow, it will give you an animation that is slow till the app you wanted loads, nice trick for your brain
Credits:
---zenulator (His awsome CDMA ROM)
---1ceb0x (Helped me with speeding this up)
---Me
Download links:
http://goo.im/devs/Enverbalalic/AnthraX-FroYoHero-kemoba.zip
Screenshots:
None so far

Project update, started working on a new version, i wont release till im 100% sure everything is working, maby some of you will get a PM with a pre-release version just to help me test, currently working on the camera, i have no idea what is wrong

Downloading right now thanks for this bro, i cant wait to try this

Can't wait to dust off my Hero and try this. It's been so long since I flashed something
Sent from my HTC One X using xda app-developers app

http://forum.xda-developers.com/showpost.php?p=34154779&postcount=829
Aha! I was right !
Are GPS and camera gonna be fixed in next release(s)? Or no hope to get that working?
No problem with bluetooth?

Camera and GPS are fixed in herolatte: http://forum.xda-developers.com/showthread.php?t=1026699
maybe this could help you or just ask erasmux if he is still here

Bluetooth is ok, im aware of herolatte, im going to try to use some stuff from it, hopefully we'll get a 100% functioning ROM in a next couple of days, if some of you can test this and report if there are any bugs please

"Doing some boring stuff"... ^^

I'm about to try.

2 more issues :
- Notification LED and buttons backlight aren't working
- mobile Data gets on by itself
Your ROM is very fast. Good work, dude. Keep on doing great job.

pirlouit2 said:
2 more issues :
- Notification LED and buttons backlight aren't working
- mobile Data gets on by itself
Your ROM is very fast. Good work, dude. Keep on doing great job.
Click to expand...
Click to collapse
Thanks, you would like data to be off by default ???

kemoba said:
Thanks, you would like data to be off by default ???
Click to expand...
Click to collapse
No, problem is that if you put it off, it gets on randomly by itself...

Great work on getting this up on the forums, kemoba!
Guys, give you the full support for this because he needs it, he's prolly the last developer for Hero (until I come back ).

1ceb0x said:
Great work on getting this up on the forums, kemoba!
Guys, give you the full support for this because he needs it, he's prolly the last developer for Hero (until I come back ).
Click to expand...
Click to collapse
Thanks man, this could be my last ROM for Hero so i'll try to make it awsome

I would really like to use or at least test this ROM but I really use both GPS and camera so
I hope that gets cleared so I can use it :good:

I took it for a spin, but when I push the button to lock the screen, the phone freezes. I left it for 10 min, but there was no change. Also i left the screen to turn black by itself but the phone became unresponsive after that. Is anybody experiencing anything like this?

f1r3fl3x said:
I took it for a spin, but when I push the button to lock the screen, the phone freezes. I left it for 10 min, but there was no change. Also i left the screen to turn black by itself but the phone became unresponsive after that. Is anybody experiencing anything like this?
Click to expand...
Click to collapse
The clock is probably too high for you, i'll set it lower in the next version, sorry about that...

kemoba said:
The clock is probably too high for you, i'll set it lower in the next version, sorry about that...
Click to expand...
Click to collapse
Thanks!
AFAIK my Hero can run at 691 mHz max frequency.

f1r3fl3x said:
Thanks!
AFAIK my Hero can run at 691 mHz max frequency.
Click to expand...
Click to collapse
I think it's 633, or 572, what recovery are you using, did you do a full wipe, did you flash any different kernels or anything ?

kemoba said:
I think it's 633, or 572, what recovery are you using, did you do a full wipe, did you flash any different kernels or anything ?
Click to expand...
Click to collapse
I'm using the latest Amon Ra recovery (I think it was 1.7 or sth). I wiped everything, and i flashed just the rom, nothing else. I flashed it twice, first i thought it was a bad download or sth, but the checksums were correct.
Also I needed to sign it, because at first the rom failed the check. I used Auto-Sign_v0.65 Maybe this can cause an issue?

[Q] CleanBean v4.0 (Issues)

I'm running a Sprint Galaxy S3, I went from fully stock ROM / Kernel to CleanBean v4.0 and I have noticed some issues with my LCD, At first I thought it was my Kernel, But then after reading through all the comments on CleanBean thread no one has my issues. So I'm not sure what is wrong with it. But this is what it does, When I'm not using it for awhile and the screen is off, I randomly will grab it and start to use it. And it will "Look" as if the phone has shut off. (Screen won't turn on etc) But my LCD notification lights are still on and blinking normally. So then I have to power button it for a long time, Then it will finally reboot. This has happened about 4-6 times so far and only when I'm not using the phone. It has yet to screw up like that during use. So if someone knows what could cause this please help me!

Is clean bean AOSP? If so, is it using the 3.4 kernel?
If not, did you do a clean flash to CleanBean and check the md5sum of your download?
EDIT: Nvm, just found the thread
Make sure it wasn't a bad download

CNexus said:
Is clean bean AOSP? If so, is it using the 3.4 kernel?
If not, did you do a clean flash to CleanBean and check the md5sum of your download?
EDIT: Nvm, just found the thread
Make sure it wasn't a bad download
Click to expand...
Click to collapse
Yeah it is this one,
http://forum.xda-developers.com/showthread.php?t=2150456
And the MD5 matches perfectly...Is there any other Kernel I could try with that ROM and see if it helps?

SodoNinja said:
Yeah it is this one,
http://forum.xda-developers.com/showthread.php?t=2150456
And the MD5 matches perfectly...Is there any other Kernel I could try with that ROM and see if it helps?
Click to expand...
Click to collapse
There's ktoonesz, agat, or freezas optimized stock kernel (in his stock rooted thread)

SodoNinja said:
Yeah it is this one,
http://forum.xda-developers.com/showthread.php?t=2150456
And the MD5 matches perfectly...Is there any other Kernel I could try with that ROM and see if it helps?
Click to expand...
Click to collapse
Have u tried flashing a different ROM to see if the problem is ROM related? I tried clean bean and personally didn't like it very much after using ROMs like TPR, MOAR , and goodness.
Sent from my SPH-L710 using xda app-developers app

SodoNinja said:
Yeah it is this one,
http://forum.xda-developers.com/showthread.php?t=2150456
And the MD5 matches perfectly...Is there any other Kernel I could try with that ROM and see if it helps?
Click to expand...
Click to collapse
I'm not running Clean Bean, here's my experience. I know that there are some apps that are poorly coded... In particular, there are some games where if I turn the screen off while playing, will do something similar when I try to turn the screen back on. When I press the power button, the hard keys light up but not the screen. I think it has something to do with how the app handles the screen-off (sleep)/screen-on (wake) commands.
Are there any apps that you use regularly that might be causing this?

phyba said:
Have u tried flashing a different ROM to see if the problem is ROM related? I tried clean bean and personally didn't like it very much after using ROMs like TPR, MOAR , and goodness.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
No I have not yet done that. I was hoping it was something simple to fix. I will try that though. Do you mind pming me links or posting here the Roms you like and that are good? I'm new to the GS3 so I have no clue what ROM's are good.
topherk said:
I'm not running Clean Bean, here's my experience. I know that there are some apps that are poorly coded... In particular, there are some games where if I turn the screen off while playing, will do something similar when I try to turn the screen back on. When I press the power button, the hard keys light up but not the screen. I think it has something to do with how the app handles the screen-off (sleep)/screen-on (wake) commands.
Are there any apps that you use regularly that might be causing this?
Click to expand...
Click to collapse
I do have alottt of games on it. But I do remember never leaving the screen on in a game..Might have done that with Firefox or something but not a game. I'll test it a few times with games / Locking it etc. Thanks for that idea.

Just tried MOAR ROM, ReFlashed it 4 times. Boots up to Recovery on restart..Then I restart it from recovery and then it sits there for more then 15mins. So I'm out of ideas, Other good stable roms out there?

Mic problems on AOKP ROM

So i'm on to like my third GS2 because it seems like i always have bad luck with ROMs or there is common issue that i haven't yet noticed. I am currently not even rooted but i have this itch to just root once again and flash my beloved AOKP that i love dearly. The problem is that every time i flash the ROM everything is fine and smooth for about a month, but then people start telling me that my mic and my end of the call sounds really bad. I always test speech to text and google now and the phone seems to understand and hear me perfectly, but the issue of phone calls remain. I really wanna know if this is a common issue especially with this ROM so that i can stay away from rooting and flashing for good now or if there is a way to fix this or if someone has worked their way around this. Any help or info would be appreciated, thanks!

AOKP to the death bro i feel you on that and do you have the newest radio installed MC6 (baseband) any of the newer ROMs all recommend to use the newest radio but on a side note yes the issue is know but not everyone gets it but ive never actually had that problem every phone acts differently and behave differently not every phone is created equal

Do I need to install the MC6 radio separately? I've had the issue with all my GS2's :/
Sent from my SGH-T989 using xda app-developers app

yes just download this and flash it in recovery http://goo.im/devs/Void_Dweller/SGH-T989_UVMC6_radio.zip and see if you have any improvements also what radio are you on now ??

OK thank you. Well like I said in my first post I am unrooted and stock right now. I just want info at my reach in case it happens again because its a stressful situation where all my calls are impossible and I want to be able to fix it right away if it happens
Sent from my SGH-T989 using xda app-developers app

I also used to have an issue with AOKP because when I was in USB mass storage connected to my computer it would either freeze and I would have to reboot the phone or it would just disconnect and not recognize the phone until I rebotted again. Any ideas on this issue? I really wanna get back to AOKP, i just run into a lot of issues somrtimes :/
Sent from my SGH-T989 using xda app-developers app

i think you should try out some slim bean by PRBASSPLAYER its what im running now all the AOKP goodness and i dont have any issues whats so ever bro super clean super fast everything works no hiccups no freezing or anything if you flash that id be happy to help you get it going man you will love it http://forum.xda-developers.com/showthread.php?t=2242144 but understand you are lil bit hesitant which is understandable i need a good solid ROM and this one by god does the trick

krazierokz said:
i think you should try out some slim bean by PRBASSPLAYER its what im running now all the AOKP goodness and i dont have any issues whats so ever bro super clean super fast everything works no hiccups no freezing or anything if you flash that id be happy to help you get it going man you will love it http://forum.xda-developers.com/showthread.php?t=2242144 but understand you are lil bit hesitant which is understandable i need a good solid ROM and this one by god does the trick
Click to expand...
Click to collapse
Is there any negative difference from the original AOKP ROM? What's the difference in the look and how it functions? I don't want to lose features. I'm checking out some videos on it right now. Is that the latest build you sent me?

The first page will tell you everything and yes its the latest I'm on build 6 stable though I don't do nightlys
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Alright sounds good and legit, i'll take your word for it. I'll be backing up and rooting soon and let you know if i need help, thanks bro! :good:

Glad to help bro have fun
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Yes, I have the same problem with every aosp rom. I've tried all the fixes, but no luck.
Sent from XDA app

Have you flashed the newest radio??
Sent from my Nexus 7

krazierokz said:
Have you flashed the newest radio??
Sent from my Nexus 7
Click to expand...
Click to collapse
I flashed original aokp milestone1 from this site: http://aokp.co/devices/hercules and everything is fine and well but i'm having problems with it freezing in usb mode. I treid flashing the radio but it would keep aborting it and not flshing. I will try re-downloading the radio and slim bean rom which was also being aborted and try again. do i need gapps when i flash slimbean as well?

OK so i was able to flash the radio you told me to but it was no use, my side of the phone call sounds like if i was talking through a fan, this is really frustrating now :/ any ideas? I will try flashing slimbean again and keep you posted. thanks for all your help up until now, i appreciate it bro.

OK so i re-downloaded the slimbean rom and also flashed the 4.2.2 slim gapps and i am so happy and satisfied that my phone actually works the way it's supposed to now. I only have two small concerns now that i hope you can help me with.
1. When i connect to my pc my phone only gives me the options to connect as a media player or a camera. It's as if it dosn't even have a usb mass storage option? I also noticed it has no developer section in settings.
2. Everything is small. I know you might know this and it might be normal or default but is there any way to change this and make it normal? Is it something to do with Dpi? It's kinda annoying lol

Big-K said:
.
1. When i connect to my pc my phone only gives me the options to connect as a media player or a camera. It's as if it dosn't even have a usb mass storage option? I also noticed it has no developer section in settings.
2. Everything is small. I know you might know this and it might be normal or default but is there any way to change this and make it normal? Is it something to do with Dpi? It's kinda annoying lol
Click to expand...
Click to collapse
1a. Mass storage mode had major problems so it was removed for now.
1b. Go to settings/about phone and tap on build number seven times to turn on developer options.
2. Go to settings/interface/general and follow the directions to change your DPI to 240.

meekrawb said:
1a. Mass storage mode had major problems so it was removed for now.
1b. Go to settings/about phone and tap on build number seven times to turn on developer options.
2. Go to settings/interface/general and follow the directions to change your DPI to 240.
Click to expand...
Click to collapse
Ok so i realized that using it as a media device i have the same options and usability as if it were in usb mass because i can access both internal and external SD storage, and i changed the lcd density to 240 and everything looks just the way it's supposed to. Thank you guys for all your help, i'm such a happy camper right now with this ROM

i told you bro slim bean rocks and rocks hard man!! glad you are back and rolling !!!!

Yeah I'm glad I took your advice, this ROM is amazing. Thanks again for all your help
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

[KJT] [My Device] About my Device...

Hello!
My name is KJT (on the net) and I have a T-Mobile Samsung Galaxy SIII t999. When it came to me it had stock 4.0.4 Android. First thing I did was Root/CWM recovery it so that I could Wi-Fi Tether and have a custom recovery.. I found nothing wrong with the phone and it did everything I needed it to and more! At the time I wasn't willing to customize my firmware because I didn't really care.. Two(almost 3) years passed by and so much has changed in the modding community. So I checked on faster ROM's for my device and found so many to pick from! I didn't know what to pick.. I tried a couple of ROM's, but I found myself going back to SlimKat 4.4.2.build.3-OFFICAL-3061 and WOW was I surprised at how the look and feel made my phone like new again.. I now say to my friends that I upgraded my S3 into the S4.. Not really, but its "like" I did, with a software update. Heheh..
Anyways back to my device.. After updating to SlimKat I found some things a little weird with my phone, but nothing I couldn't figure out (except one thing that I will get into a little later). There was a couple things screwy with it and I had to research for a couple of days to find the answers. After fixing the small issues I wanted to fix the CPU issues and why it would throttle when I played a game longer then 5mins.. I found the option and disabled it, but it seemed to drain my battery way faster with it off. I then looked at new kernels for my phone and what would work good for battery and for performance. I found KTweaker and realized that installing SlimKat changed my model number to Samsung-SGH-I747. So I installed the Kernal (3.4.82-cyanogenmod-g9a7e2a6 [email protected] #1 Sun Mar 9 16:16:31 MST 2014). It seemed to work really well, but I see the LED blinking Blue on bootup(and stay blinking) every time I restart my phone now after installing this Kernal. So I tricked the LED to turn off by using Light Manager's test notification option. Once I turn on test and then shut screen off, the LED turns to the color I was testing in Light Manager and the LED turns off.. So that is the trick, but if there is anyone that can help me understand or fix the Blue LED that stays blinking after boot up, I would really appreciate it. I have no other apps that control notifications, and I have tried turning off all LED options, but nothing seems to work. The only thing I can do is trick the LED..
So after that, I decided I would try and find another Kernel/Tweaks, but after flashing Xtweak it seems to be running a bit smoother. I am stuck no with only one issue and that is the Blue LED flashing at boot and staying on until I trick it. KTweak app (Not XTweak) that is listed in the menu had some crazy OC settings and profiles. Now I think I am set with my CPU issues. I played my game Order and Chaos Online(GAME PLAY) for 4 hours yesterday with no lag and the CPU never throttled.
So my only problem is the Blue LED at boot.. I hope to figure it out and I will report back if I find the solution. Thanks for reading.
------------------------------------------
::UPDATE:: March 01-06, 2014...
------------------------------------------
First off the LED blue light has been fixed with a format of the internal memory and flashing a new rom. I believe the problem was with Slimkat ROM and Ktoons kernel on build 3.
I have SlimKat Build 4 now after some internal data lose(system/data/cache and most of my personal data from the last month... lol). I recommend not trying to fix your phone at 3:am and tired.. I had a back up from last month, but I know I lost a lot of other stuff I can't remember, but I think it was a good thing, because my phone is now running faster and with a lot more space on the internal hdd. So I guess I did a system restore with updating to Build 4. I am really enjoying build 4 and haven't come across any problems. I have not installed KToons kernel yet, but he has updated it and I will try it out when I have more time. I will update later. Thanks for reading..
xKJTx

If you don't need led
Go to
Settings→Display→Light Options→Notification Led
And disable it.
Sent from my Slim Muffin.

Thanks for the reply!
Casanova said:
If you don't need led
Go to
Settings→Display→Light Options→Notification Led
And disable it.
Sent from my Slim Muffin.
Click to expand...
Click to collapse
I do need the notifications turned on, but when ever I restart my phone the blue LED light(top left cover on face of device) continues to stay pulsing way past boot. I use to see it only pulse a few times at boot and then it would stop and load the OS. It only started happening right after I flashed the KToon kernel. I love the kernel and it make my device so much better then it was before with the SlimKat kernel.
I also have tried many different steps to stop the pulse at start up, but only found that if I trick it and put on another LED notification, then it stops after I make it change to the other notification.. Its almost like it gets stuck on the notification for boot up. I uninstalled all apps and also reformatted.. I was thinking of another kernel install, but have not found a better kernel(even with this issue) then KToons..

xkjtx said:
I do need the notifications turned on, but when ever I restart my phone the blue LED light(top left cover on face of device) continues to stay pulsing way past boot. I use to see it only pulse a few times at boot and then it would stop and load the OS. It only started happening right after I flashed the KToon kernel. I love the kernel and it make my device so much better then it was before with the SlimKat kernel.
I also have tried many different steps to stop the pulse at start up, but only found that if I trick it and put on another LED notification, then it stops after I make it change to the other notification.. Its almost like it gets stuck on the notification for boot up. I uninstalled all apps and also reformatted.. I was thinking of another kernel install, but have not found a better kernel(even with this issue) then KToons..
Click to expand...
Click to collapse
Led is related to kernel.
Try to call your kernel dev.
Report him this issue.
Sent from my Slim Muffin.

Do you know?
Casanova said:
Led is related to kernel.
Try to call your kernel dev.
Report him this issue.
Sent from my Slim Muffin.
Click to expand...
Click to collapse
Thank you and I will speak to him/her.
Question for you.. Do you know of any other kernels that might be better or the same as KToons? If you don't know thats cool.. Thanks for the replies!
-KJT-

xkjtx said:
Thank you and I will speak to him/her.
Question for you.. Do you know of any other kernels that might be better or the same as KToons? If you don't know thats cool.. Thanks for the replies!
-KJT-
Click to expand...
Click to collapse
You want stability, stick with stock

Thank you for reply..
LoopDoGG79 said:
You want stability, stick with stock
Click to expand...
Click to collapse
I had the stock for over 2 years and wanted something new.. More performance and battery life. This kernel has done that with the KTweak settings I have.
-KJT-
EDIT: What I really want is what this kernel is giving me, its just the led problems I need to solve... lol

xkjtx said:
Thank you and I will speak to him/her.
Question for you.. Do you know of any other kernels that might be better or the same as KToons? If you don't know thats cool.. Thanks for the replies!
-KJT-
Click to expand...
Click to collapse
Try this app
https://play.google.com/store/apps/details?id=com.bam.android.androidtweaker.two
It has some cool tweaks
Sent from my Slim Muffin.
Edit
P.S.
You said you have T-Mobile S3 but you are flashing AT&T S3 kernels and ROMs on it .[emoji53]

Thank you for reply!
Casanova said:
Try this app
[link removed because free user]
It has some cool tweaks
Sent from my Slim Muffin.
Edit
P.S.
You said you have T-Mobile S3 but you are flashing AT&T S3 kernels and ROMs on it .[emoji53]
Click to expand...
Click to collapse
I will try that app out and see what its about..
This rom is for both Category: d2att-d2tmo, but when it installed it said that now I am an d2att with I747 model.. When it came to me in the box it had 4.0.4 and was t999 model. After installing the Category: d2att-d2tmo rom it changed my phones specs..
-KJT-

xkjtx said:
I will try that app out and see what its about..
This rom is for both Category: d2att-d2tmo, but when it installed it said that now I am an d2att with I747 model.. When it came to me in the box it had 4.0.4 and was t999 model. After installing the Category: d2att-d2tmo rom it changed my phones specs..
-KJT-
Click to expand...
Click to collapse
But the kernel is obviously for AT&T
Sent from my Slim Muffin.

Casanova said:
But the kernel is obviously for AT&T
Sent from my Slim Muffin.
Click to expand...
Click to collapse
S3 kernels are interchangeable.
Sent from my Nexus 7 2013 edition.

LoopDoGG79 said:
S3 kernels are interchangeable.
Sent from my Nexus 7 2013 edition.
Click to expand...
Click to collapse
[emoji33]
Sent from my Slim Muffin.

Casanova said:
[emoji33]
Sent from my Slim Muffin.
Click to expand...
Click to collapse
Yup, i've been flashing on Galaxy's since the S2. After the S2, Samsung released identical hardware for all carriers, including the international edition. The only software you had to worry about is recoveries, Baseband, and if on T Mobile, the TW version if you wanted Wifi calling.
Sent from my SGH-M919 using Tapatalk

Thanks for the reply!
LoopDoGG79 said:
Yup, i've been flashing on Galaxy's since the S2. After the S2, Samsung released identical hardware for all carriers, including the international edition. The only software you had to worry about is recoveries, Baseband, and if on T Mobile, the TW version if you wanted Wifi calling.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
My wireless calling works fine and I am on T-Mobile network. So I guess I did everything correct.. lol
Still trying to figure out the Blue LED at boot....

UPDATE!!!
Ok, so I found out that it was the Ktoons kernel that was giving the notification Blue LED at start and wouldn't go away. I guess it was set to notify at start, but then never turned off. This is now fixed because of a flash to the new build 4 of slimkat.
So the issues that I was having before with the LED was only because of the kernel I flashed on a slimkat rom. It worked great, but had the LED issue.
::UPDATE::
Ok, now to talk about my new updated build 4 slimkat device.
**MAIN POST**