Does anybody know of one for the epic 4g?
Our front cameras are so bad it don't work worth a darn.
http://www.killthecan.org
Cm10 has it included....I have gotten it to work a couple of times
Sent from my SPH-D700 using Tapatalk 2
phonehunter59 said:
Cm10 has it included....I have gotten it to work a couple of times
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
I've flashed cm10 A. Didn't find it B.gapps screwed the phone completely up fc's like crazy
Sent from my SPH-D700 using xda app-developers app
Silly180sx said:
I've flashed cm10 A. Didn't find it B.gapps screwed the phone completely up fc's like crazy
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
It is included in the gapps file, and make sure you are flashing the gapps for 4.1.2 not 4.2 unless you are on cm10.1 http://goo.im/gapps/gapps-jb-20121011-signed.zip there is the link for 4.1.2 and make sure you do not dirty flash it, clean install oh and you need a file named .forcefaceunlock on the root of the sdcard
phonehunter59 said:
It is included in the gapps file, and make sure you are flashing the gapps for 4.1.2 not 4.2 unless you are on cm10.1 http://goo.im/gapps/gapps-jb-20121011-signed.zip there is the link for 4.1.2 and make sure you do not dirty flash it, clean install oh and you need a file named .forcefaceunlock on the root of the sdcard
Click to expand...
Click to collapse
Everything worked now faceunlock fc's about to wipe and see if that fixes it.. brb
Related
tested many roms now running on juggernaut 5
flashed synergy kernel and phone cant place calls ... just receive calls and send/receive mgs
so i restore and flashed hercules kernel (faux) still same problem
any help
sry for the demon that brought u here
what do u mean u cant make calls ???
answer: once i tap the call button, get the calling screen and call ended right away
Did you just answer and replied to your own thread? Anyways use darksides super wipe and do a fresh clean install. Flash dark side kernel or Eugenes
Sent from my SGH-T989 using Tapatalk
Be aware if you flash TDJ's super wipe you will have to re flash the ROM also. You cant just use it to flash a kernel.
GreggoryD502 said:
Be aware if you flash TDJ's super wipe you will have to re flash the ROM also. You cant just use it to flash a kernel.
Click to expand...
Click to collapse
Do i lose my data ?
Sent from my SGH-T989 using xda premium
nabilbek said:
Do i lose my data ?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Your app data will b deleted
back them all up with titanium backup.
Your internal and SD card with b fine of course...
Sent from my SGH-T989 using XDA
nabilbek said:
Do i lose my data ?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Yes, anything but your "/emmc" and "/emmc/sdcard" will be wiped. Not sure if thats the correct way to put it but it gets the point across
iLeopard said:
Did you just answer and replied to your own thread? Anyways use darksides super wipe and do a fresh clean install. Flash dark side kernel or Eugenes
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
lol no i meant someone will ask this question and thats the answer
imma try the super wipe then jugger then dark side kernel (tho i wanted hercules or synergy)
I know we had a Flashable.zip to return you to 100% stock. anyone have that lying around? i've got to send my broken t989's usb port in to samsung so I can start cranking some stuff out again. since the usb port is fried ODIN is a no go :[ someone help :]
starskyrob said:
I know we had a Flashable.zip to return you to 100% stock. anyone have that lying around? i've got to send my broken t989's usb port in to samsung so I can start cranking some stuff out again. since the usb port is fried ODIN is a no go :[ someone help :]
Click to expand...
Click to collapse
Wish I could help you with that. But I can help you with this sound piece of advice, if you manage to get that .zip, DO NOT FLASH IT UNTIL you flash the flash counter removal .zip, so they can't tell you ever rooted/flashed on your phone. After flashing that, than proceed to flash that stock .zip...all the best and good luck to you!
Ask mrx ... he does everything stock he have bases on t989$
Sent from my SGH-T989 using xda app-developers app
Yeah there were like 3 zips... Rom kernel and recovery. You turn just remove the super user after that. If anything you should be fine flashing stock ROM and kernel. No need to go to stock recovery
Sent from my SGH-T989 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1374868
I just had to flash that too. Good luck. I also flashed the counter reset zip too. That is in the stickies.
Sent from my SGH-T989 using xda app-developers app
starskyrob said:
I know we had a Flashable.zip to return you to 100% stock. anyone have that lying around? i've got to send my broken t989's usb port in to samsung so I can start cranking some stuff out again. since the usb port is fried ODIN is a no go :[ someone help :]
Click to expand...
Click to collapse
Yes someone help him! I'm missing his PA rom!
Sent from my SAMSUNG-SGH-T989 using xda premium
Couldent you just make a image from the ICS Odin flash
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
don728871 said:
Couldent you just make a image from the ICS Odin flash
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
His USB is fryed, so starskyrob can't, can you do that for him!?
Sent from JMT Goodness
CloudTown3 said:
http://forum.xda-developers.com/showthread.php?t=1374868
I just had to flash that too. Good luck. I also flashed the counter reset zip too. That is in the stickies.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
If you didn't see me post it before, here it is again. The links are in the OP.....
Sent from my SGH-T989 using xda app-developers app
CloudTown3 said:
If you didn't see me post it before, here it is again. The links are in the OP.....
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Dude, he cannot use Odin, his USB is fried. He needs a FLASHABLE zip of stock ROM.
Sent from JMT Goodness
LoopDoGG79 said:
Dude, he cannot use Odin, his USB is fried. He needs a FLASHABLE zip of stock ROM.
Sent from JMT Goodness
Click to expand...
Click to collapse
LD, there is a way to return to stock enough'
Sent from my SAMSUNG-SGH-T989 using xda premium
LoopDoGG79 said:
His USB is fryed, so starskyrob can't, can you do that for him!?
Sent from JMT Goodness
Click to expand...
Click to collapse
Was I not clear or are u stupid you can extract the image from odin and convert it to a flash able cwm ...get it now
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
don728871 said:
Was I not clear or are u stupid you can extract the image from odin and convert it to a flash able cwm ...get it now
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
My bad, didn't read enough
Sent from JMT Goodness
Anyways rob if u want closest to stock flash the MR.X flash able ICS its floating around bro
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
I can try to make a CWM/TWRP not De-odexed or rooted out of the stock T989 UVLH1 tar file and make a flashable stock recovery, once I get off work.
Edit 1:Uploading Flash-able SGH-T989 UVLH1 stock rom to Dev-host(20 minutes to finish upload) wait for confirmation i need to test it on my device 1st once is done uploading in the mean time i will make flash-able stock recovery and test it also.
Edit 2:Uploading done both rom and recovery, going to download now both and test it.
Sent from my SGH-T989 w/CM10-Hybrid ParanoidAndroid v2.1(9-8-12)by: gs2usr using XDA app.
Ok testing completed, everything works as it should. The ROM zip will update your kernel to stock.
Might need to flash the UVLH1 radio 1st before flashing the stock recovery.
This is how I did it(tested it):
1. install/flash stock ROM 1st.
2. Once installation completed Reboot to custom recovery.
3. install/flash stock recovery.zip.
4. Power off to verified stock recovery.
SGH-T989_UVLH1_Stock_Odex_zipaligned_signed.zip
http://d-h.st/MAT
SGH-T989_UVLH1_Stock_Recovery.zip
http://d-h.st/UwL
I also have a de-odex and rooted version of this ROM @:
http://forum.xda-developers.com/showthread.php?t=1858435
KRZ-2pa said:
Ok testing completed, everything works as it should. The ROM zip will update your kernel to stock.
Might need to flash the UVLH1 radio 1st before flashing the stock recovery.
This is how I did it(tested it):
1. install/flash stock ROM 1st.
2. Once installation completed Reboot to custom recovery.
3. install/flash stock recovery.zip.
4. Power off to verified stock recovery.
SGH-T989_UVLH1_Stock_Odex_zipaligned_signed.zip
http://d-h.st/MAT
SGH-T989_UVLH1_Stock_Recovery.zip
http://d-h.st/UwL
Click to expand...
Click to collapse
Awesome and thanks! I know starskyrob needs this as has been working on the PA rom. I'm currently using another one posted in his thread and it works great! I honestly have no idea if the guy made it or if he just posted it.
Sent from my SAMSUNG-SGH-T989 using xda premium
LoopDoGG79 said:
Dude, he cannot use Odin, his USB is fried. He needs a FLASHABLE zip of stock ROM.
Sent from JMT Goodness
Click to expand...
Click to collapse
Dude if you look at that thread again there's a flashable zip towards the the top of the OP. It's zedomax's stock flashable zip.
Sent from my SGH-T989 using xda app-developers app
CloudTown3 said:
Dude if you look at that thread again there's a flashable zip towards the the top of the OP. It's zedomax's stock flashable zip.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Been dualy noted. I jumped the gun when I read Odin in the links page. My apologies.
Sent from JMT Goodness
---------- Post added at 02:11 PM ---------- Previous post was at 02:07 PM ----------
KRZ-2pa said:
Ok testing completed, everything works as it should. The ROM zip will update your kernel to stock.
Might need to flash the UVLH1 radio 1st before flashing the stock recovery.
This is how I did it(tested it):
1. install/flash stock ROM 1st.
2. Once installation completed Reboot to custom recovery.
3. install/flash stock recovery.zip.
4. Power off to verified stock recovery.
SGH-T989_UVLH1_Stock_Odex_zipaligned_signed.zip
http://d-h.st/MAT
SGH-T989_UVLH1_Stock_Recovery.zip
http://d-h.st/UwL
Click to expand...
Click to collapse
I'm saving the link to this comment. Never know when you run into the same situation as starskyrob. Plus its pretty convenient :thumbup:
Sent from JMT Goodness
Thank you all for your help. Phone is on its way to Samsung tomorrow. Then expect some paranoid android 2.2 for our beloved t989!
Sent from my SAMSUNG-SGH-T989 using xda premium
hi guys,
alright some i'm new to this forum. i wouldnt consider myself that great at rooting and flashing etc but i'm getting the hang of it. been following qbking77 cuz he is like my god lol
anyway, i need to post at least 10 times before i can post on the thread that i wanna post on and i searched a little bit but cant seem to find what i'm looking for. and btw i have an Epic 4g.
ok, so ive noticed everyone saying i have CM10 or 9 and this and that and then they say they are on FC19 or El22 etc. I want to know how do i update/change that stuff, what my options are, and what would those benefits be?
i'm currently running CM10 build 9/14 by nightlies on stock FC09. will be going to the most recent build soon but want to maybe play with the baseband version. thanks guys.
You are correct. It is the baseband aka modem software on your phone. There is a thread in development that allows you to flash with clockwork mod and another thread that has you changing modems with Odin.
Sent from my SPH-L710 using xda premium
Since you're on CM10, your first stop should be this thread:
http://forum.xda-developers.com/showthread.php?p=30433583
Should give you better service/speed than any Epic modem.
Sent from my SPH-D700 using Tapatalk 2
Ok. I'm a noob. I'm on stock fc09. So if I go to that link what modem would that put me at? And I'm assuming flashing means all you do is go to recovery mode and install zip from sd card, correct?
Sent from my SPH-D700 using xda app-developers app
bpsears90 said:
Ok. I'm a noob. I'm on stock fc09. So if I go to that link what modem would that put me at? And I'm assuming flashing means all you do is go to recovery mode and install zip from sd card, correct?
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
That will put you on the Nexus 4G modem. Most have reported great results.
And yes, boot to recovery, wipe cache and dalvik, and flash away.
Sent from my SPH-D700 using Tapatalk 2
And then reflash CM10 or no?
Sent from my SPH-D700 using xda app-developers app
bpsears90 said:
And then reflash CM10 or no?
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
Nope. CM10 then the appropriate all in one and you're done.
Sent from my SPH-D700 using Tapatalk 2
ok so when i go to the link i want to download the file thats posted after it says CM10 roaming fixed
i downloaded through my phone and tried flashing it but it failed right away.
bpsears90 said:
ok so when i go to the link i want to download the file thats posted after it says CM10 roaming fixed
i downloaded through my phone and tried flashing it but it failed right away.
Click to expand...
Click to collapse
Mount system in CWM before flashing
Sent from my SPH-D700 using Tapatalk 2
frostedunit said:
Mount system in CWM before flashing
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
i really appreciate all your help frost. but i'm not up to par with the terms and stuff quite yet. sooooo what does that mean? lol
bpsears90 said:
i really appreciate all your help frost. but i'm not up to par with the terms and stuff quite yet. sooooo what does that mean? lol
Click to expand...
Click to collapse
Boot into recovery, go to mounts/storage and mount /system.. when you boot to recovery you'll see it....
/\/\/\This.
And no problem. We were all noobs once.
Sent from my SPH-D700 using Tapatalk 2
i think i got it now. we'll see if it works. i followed the steps from here http://forum.xda-developers.com/showthread.php?t=1848010
i wiped cache and then dalvik and then i rebooted recovery and flashed the modem and then the rom and its working but now it says baseband version unknown. what does that mean?
bpsears90 said:
i think i got it now. we'll see if it works. i followed the steps from here http://forum.xda-developers.com/showthread.php?t=1848010
i wiped cache and then dalvik and then i rebooted recovery and flashed the modem and then the rom and its working but now it says baseband version unknown. what does that mean?
Click to expand...
Click to collapse
The modem package includes a modified kernel. You must flash the ROM first, or its included kernel won't recognize the Nexus modem.
Sent from my SPH-D700 using Tapatalk 2
it keeps failing. i downloaded this: http://darkierawr.com/Android/Users/xboxfanj/nexusmodempatchcm10prevAIO.zip
was that the right one?
I'm pretty sure my baseband said unknown for the first hour or so before it showed the modem version
Sent from my SPH-D700 using xda app-developers app
the only way i could get that file to install was if i did it before the CM10 rom. when i do it after it fails. so i wiped cache and dalvik again and just installed CM10 and now i still have unknown baseband version. what do i do? will i have to do a data reset?
Try mounting system and data in recovery.
Sent from my SPH-D700 using Tapatalk 2
i accidently wiped date, then cache, then dalvik, mounted system and then mounted data. flashed CM10 and then tried the modem and it still failed.
nevermind! i accidently mounted sd card instead of system. wiped everything rebooted recovery, mounted system and data and installed both zips. booting up now. taking a while for the animation tho....
Hey guys, I just picked up a new Galaxy S3 this morning and I'm not sure how to install a custom AOKP rom.
I've already rooted the phone, but because the firmware is 4.1.1 I'm unsure how to proceed.
Should I just install the latest AOKP rom version, or do I need to upgrade to a newer firmware while still using stock and go from there?
Sent from my SAMSUNG-SGH-I747 using xda premium
nvasdf said:
Hey guys, I just picked up a new Galaxy S3 this morning and I'm not sure how to install a custom AOKP rom.
I've already rooted the phone, but because the firmware is 4.1.1 I'm unsure how to proceed.
Should I just install the latest AOKP rom version, or do I need to upgrade to a newer firmware while still using stock and go from there?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Should be in the q&a threads...
You'll need to install a custom recovery (twrp or cwm)
Than you can flash any ROM you want. If you want Tasks aokp just download the newest version and most recent gapps and flash as instructed in the thread.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I believe the rom I used to root my phone also installed CWM, so I should be good to go as soon as I finish downloading AOKP and gapps.
Thanks for the reply, bud.
Sent from my SAMSUNG-SGH-I747 using xda premium
Moved as this is more appropriate in Q and A.
nvasdf said:
I believe the rom I used to root my phone also installed CWM, so I should be good to go as soon as I finish downloading AOKP and gapps.
Thanks for the reply, bud.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Make sure you have the latest version of cwm. They're at 6.0.2.3 if your recovery isn't at that than the flash won't work properly.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Check out the link in my signature for backup and rom flashing procedures.
Cwm 6.0.3.1 is the most recent, not 6.0.2.3. You can find it in post #2, at the bottom. It's a zip you can flash in cwm
xBeerdroiDx said:
Check out the link in my signature for backup and rom flashing procedures.
Cwm 6.0.3.1 is the most recent, not 6.0.2.3. You can find it in post #2, at the bottom. It's a zip you can flash in cwm
Click to expand...
Click to collapse
That's what happens when you use twrp lol. You lose track of cwm updates lol.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
Make sure you have the latest version of cwm. They're at 6.0.2.3 if your recovery isn't at that than the flash won't work properly.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Success!
Ended up having to install CWM, but everything went smoothly from there and now I'm running AOKP.
Now to replace these damn unicorns on my boot screen...
Sent from my SGH-I747 using xda premium
nvasdf said:
Success!
Ended up having to install CWM, but everything went smoothly from there and now I'm running AOKP.
Now to replace these damn unicorns on my boot screen...
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
The Unicorn makes the AOKP what it is.:laugh:
KorGuy123 said:
The Unicorn makes the AOKP what it is.:laugh:
Click to expand...
Click to collapse
Do you know if there's any way to remove the image that is displayed before the boot animation? It has a picture of some briefs and says "Task650 Kernel."
nvasdf said:
Do you know if there's any way to remove the image that is displayed before the boot animation? It has a picture of some briefs and says "Task650 Kernel."
Click to expand...
Click to collapse
Compile a custom kernel. Or replace it.
task650 said:
Compile a custom kernel. Or replace it.
Click to expand...
Click to collapse
It's not really an issue, I just tend to be somewhat of a minimalist when it comes to boot logos and animations.
Either way, I don't know much about compiling kernels. And the consensus seems to be that your kernel is pretty good, so I'm gonna stick with it.
Thanks for the reply, and I appreciate your work on the rom. Cheers!
nvasdf said:
It's not really an issue, I just tend to be somewhat of a minimalist when it comes to boot logos and animations.
Either way, I don't know much about compiling kernels. And the consensus seems to be that your kernel is pretty good, so I'm gonna stick with it.
Thanks for the reply, and I appreciate your work on the rom. Cheers!
Click to expand...
Click to collapse
You're welcome.
Sent from my SPH-L710 using xda app-developers app
Djmicl said:
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I'm assuming you're coming from stock rooted TW.
First two things you want to do are:
Upgrade your phone baseband/firmware to MD4. The newer versions of CM10.1 include a check for your bootloader. It must be MD4, so you'll need to make sure you're running that. You can go to Freeza's thread and download the MD4 Update file:
MD4 Firmware:
MD4 Firmware/modem/baseband update
MD5: EEEAFDBE59CF9C5B492B1A591EC92D02
Click to expand...
Click to collapse
The file name is: Galaxy-S-fre3-MD4FirmwareModemAIO.zip
Upgrade your Recovery to the latest. I only run TWRP, so I can't say anything for CWM, but it's best to use the latest TWRP (v2.5.0.0) for installing CM10.1. Naddict has created update zips for the various recoveries that you can flash from the recovery itself. Also, CNexus has a recovery switcher that works well, too.
Other than that, I always recommend a full wipe before switching between TW and AOSP:
Wipe Cache and Dalvik Cache
Wipe /data
Wipe /system
Hope this helps!
Thank you very much.
Yes I'm stock rooted with cwm. And I have md4 already installed.
How stable is Cyanogenmod rc5?
Sent from my SPH-L710 using xda app-developers app
Djmicl said:
Thank you very much.
Yes I'm stock rooted with cwm. And I have md4 already installed.
How stable is Cyanogenmod rc5?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I honestly haven't used CM 10.1 in a while, but typically the Release Candidates (RCs) are pretty rock solid. The best thing to do would be to read the last 10-15 pages of the CM10.1 Thread to see if there are any known bugs with RC5 (and if they're deal breakers for you).