Related
Hello everyone,
Stock+ Team ($omator & Grooby) are proud to bring you the latest rooted kernels based on samsung stock kernels that you may find in ROM by Samsung.
Why should i use this kernel?
Our kernels are uber-minimal modification of stock kernel used only for rooting (no custom recovery is installed). So the kernel it's like stock just rooted, and there is small chance (or any chance) that it will be detected as modified by service center at the first look
Here's the latest rooted kernel for I9000XWJW1 (2.3.6) which just leaked !
*NEW* ROOTED! I9000XWJW1 - Gingerbread (2.3.6) - CL: 788890 - B.Date: Tue Dec 13 KST 2011 - Download HERE!
Instructions:
1. Flash zImage.tar of choosen kernel using odin (you will find it in package)
2. enable usb debugging in settings->applications
3. while still connected and odin/kies is turned off, run RUNME.BAT (also in package)
4. Install latest Superuser.apk from market!
5. Profit!
Enjoy!
PS: Remember to join our service at http://samsung-updates.com/ or follow us on twitter at twitter.com/SamsungUpdates
"One stock+ Team to rule them all, One stock+ Team to root them, One stock+ Team to beat them all and in the happiness bind them" - Toolkien ;P
OK, thanks, but, it's not realy clear for me.
I open ODIN
1 - I flash XWJW1
2 - I flash your zimage.tar
I turn off ODIN
3 - I run RUNME.BAT
end ?
I have JW1 rooted ?
Yup. just download Superuser.apk from Android market and you're done
Hi,
I'm currently using 2.6.35.12-gdf10700 [email protected]#1.
Is this stock (I9000XWJW1) kernel more up to date / better?
Many thanks
Hi, No Expert, as far as i know the kernel you have currently installed is from cm9 ICS or CM7 i think, this kernel is for JW1 samsung this will not work on your rom .
rayul123 said:
Hi, No Expert, as far as i know the kernel you have currently installed is from cm9 ICS or CM7 i think, this kernel is for JW1 samsung this will not work on your rom .
Click to expand...
Click to collapse
Many thanks.
Grooby said:
Hello everyone,
Stock+ Team ($omator & Grooby) are proud to bring you the latest rooted kernels based on samsung stock kernels that you may find in ROM by Samsung.
Why should i use this kernel?
Our kernels are uber-minimal modification of stock kernel used only for rooting (no custom recovery is installed). So the kernel it's like stock just rooted, and there is small chance (or any chance) that it will be detected as modified by service center at the first look
Here's the latest rooted kernel for I9000XWJW1 (2.3.6) which just leaked !
*NEW* ROOTED! I9000XWJW1 - Gingerbread (2.3.6) - CL: 788890 - B.Date: Tue Dec 13 KST 2011 - Download HERE!
Instructions:
1. Flash zImage.tar of choosen kernel using odin (you will find it in package)
2. enable usb debugging in settings->applications
3. while still connected and odin/kies is turned off, run RUNME.BAT (also in package)
4. Install latest Superuser.apk from market!
5. Profit!
Enjoy!
PS: Remember to join our service at http://samsung-updates.com/ or follow us on twitter at twitter.com/SamsungUpdates
"One stock+ Team to rule them all, One stock+ Team to root them, One stock+ Team to beat them all and in the happiness bind them" - Toolkien ;P
Click to expand...
Click to collapse
What version is the zImage kernel?
(I uploaded this here, because i cannot post in Android Dev section)
This is an unnoficial build of ParanoidAndroid latest sources, i just modified some files to get it to compile
I'm not responsible for anything , flash at your own risk.
MAGURO ONLY
Download info:
Download the rom from the link below and place on sdcard.
Download a 4.3 Gapps package and place on sdcard
Flash rom.
Flash gapps.
Reboot
(Weird linking due to forum restrictions :S, just remove spaces)
pa_maguro-3.90-20130802-linaro4.7.zip
ht tps:/ / mega .co. nz / #!94oUGCbL!WZmmFxfmfYXTufDvrQyl7HIpWqAhrhTCjg_Ykfs_770
GAPPS
h ttp:/ / download .paranoidandroid .co/roms/gapps /pa_gapps-full-4.3-20130801a-signed.zip
First time building a rom, but i'll help as long as my knowledge be useful.
BEST ROMS
ORDERED ACCORDING TO THE SOURCE ROM/FW:
MIUI V5 4.9.26 by Helinchun
Pros:
The most updated rom
Clear and beautiful graphic
B710 Kernel
Cons:
High battery consumption
Bluetooth doesn't work
Needs testers
LINK THREAD
ENG - DIRECT DOWNLOAD
ITA - DIRECT DOWNLOAD
MOKEE OS 44.4 by xyyx 01/10/14
Pros:
All seems to work
F2FS System
A lot of customizations
UV Present
Cons:
Camera random crashes
Nothing relevantLINK THREAD
DOWNLOAD ROM
PATCH FOR EXT_SD AS PRIMARY
CM 11 M10 by Niisp 20/09/14
Pros:
xyyx Kernel
Gps and bluetooth are working
New kernel, new governors
Radio FM (see here)
SD is primary by default (you can always get the int-sd version in the downloads)
Cons:
Nothing relevantLINK THREAD
DOWNLOAD ROM (EXT AS PRIMARY)
DOWNLOAD ROM (INT AS PRIMARY)
GAPPS (select the 4.4 package you like more)
CM 11 by Spanorg 15/07/14
Pros:
Shev_T Kernel (B710 based)
Haptic feedback works (can be activated or disactivated)
Bluetooth works
GPU drivers updated
Cons:
Nothing relevant
LINK THREAD
DIRECT DOWNLOAD
DISABLE VIBRATION
SD CARD FIX (Use in case of problems with sd card)
GAPPS
LIQUID SMOOTH 3.1 by Spanorg 31/08/14
Pros:
Newest work by the famous Spanorg
It's really smooth
F2FS Support
A lot of new features from Mokee and CM11: xposed is almost useless
Bluetooth works
Cons:
Some SystemUI rebootsLINK THREAD
DOWNLOAD ROM
F2FS Recovery
DOWNLOAD GAPPS
LIQUID SMOOTH by xyyx 01/10/14
Pros:
Real fluid
Good battery optimization
A lot of new features from Mokee and CM11
Bluetooth works
Really modded: you can do almost everything you want
Cons:
Nothing relevant
LINK THREAD
DIRECT DOWNLOAD
PATCH FOR EXT_SD AS PRIMARY
OMNIROM 4.4.2 by Spanorg 26/04/14
Pros:
Haptic feedback works (by default it is activated)
Bluetooth works
Cons:
Nothing relevant LINK THREAD
DOWNLOAD ROM + SUPERSU
EXT_SD PRIMARY / INT_SD PRIMARY
SD CARD FIX (Use in case of problems with sd card) + GPS FIX + SCREEN_RECORD FIX
GAPPS
CM 10.2 by Spanorg 11/05/14
Pros:
Real fluid
Good battery optimization
Bluetooth works
B707 Kernel
13500 on AnTuTu
Cons:
Nothing relevant
LINK THREAD
DIRECT DOWNLOAD
GAPPS BY SPANORG
GAPPS BY TESTUSER0072
AP V8 by McDonald
Pros:
McD is a serious italian developer
Radio FM integrated
B709 based
Init.d support & some other tweaks
Cons:
Nothing relevant
LINK THREAD
DIRECT DOWNLOAD
MEMORY SWAP (it mixes the 2 memories)
MEMORY SWAP REVERSE
CARBON ROM by Niisp 18/07/14
Pros:
Compiled with Linaro
Bluetooth works
Cons:
Nothing relevantLINK THREAD
DOWNLOAD ROM (EXT_SD AS PRIMARY)
DOWNLOAD ROM (INT_SD AS PRIMARY)
GAPPS
MOKEE OS 42.2 by Niisp 03/12/13
Pros:
Real fluid and stable
B708 Kernel
Niisp started again developing this ROM, after a period of inactivity
Cons:
Bluetooth partially works (see this review for more details about this issue: http://forum.xda-developers.com/showpost.php?p=49224863&postcount=38)
http://4pda.ru/forum/index.php?s=&showtopic=396626&view=findpost&p=28832074 (link thread)
https://disk.yandex.com/public/?hash=arfD5PXihQt/BbiqWCcFHXoAymdkWIso66RR6gyW9YE= (with EXTSD as default)
https://disk.yandex.com/public/?hash=hH4/4ZPoyMK/F/s0qmQzC4duc4d4pIsha8lOiOrLiiw= (with INTSD as default)
CM 10.1 by Shev_T 10/02/14
Pros:
Real fluid (but *)
B709 Kernel
Compiled with Linaro -> MOOOOORE SPEED
Everything works
Cons:
*Might require some reboot
LINK THREAD
DIRECT DOWNLOAD
GAPPS (BY SHEV_T)
GAPPS (BY TESTUSER0072)
B704_ATX by Marismillas v1.2
Pros:
Real stable: in three months of use, the phone never got stucked
Based on a stock firmware
Gapps already included
Init.d support and a looooooooooot of tweaks (perfect for people like me who don't want to do anything else after flash xD)
Cons:
Not so many updates, don't know if project is definitely abandoned
In YouTube videos h/w acceleration doesn't work properly
Same thing for the other videos (but you can avoid this problem with some 3rd part apps)
http://forum.xda-developers.com/showthread.php?p=46683785#post46683785 (link thread)
http://www.4shared.com/zip/daUJt2oR/B704-marismillas12.html (direct download)
BEST STOCK FIRMWARES
ORDERED ACCORDING TO THE ANDROID VERSION:
B229 ICS - GLOBAL, NO EMUI
Pros:
The most stable firmware
Everything works
Battery consumption is real good
You can use an better uc kernel (http://www.android-hilfe.de/attachm...-image-ics-init-d-288-1600-mhz-hwuknernel.zip)
Cons:
Some apks won't work (or won't work well) because of its older Android version
You have to install it with stock recovery
https://mega.co.nz/#!Bh5BzZzK!dCEzsU_a3tO-UWdz_qsjaE-h7tZr0RIXib6f6v2g_3Y (direct download)
B130 ICS - GLOBAL, EMUI 1.0
Pros:
Everything works
More customable
You can use an better uc kernel (http://www.android-hilfe.de/attachm...-image-ics-init-d-288-1600-mhz-hwuknernel.zip)
Cons:
Battery consumption is not as good as in B229, but still acceptable
EMUI is not everyone's taste
You have to install it with stock recovery
http://zl.hwpan.com/u32513461/GROM/U9200-EM-UMTS-V100R00G403B130204D00SDV02/Upgrade.rar (direct download; sorry, no faster links)
B708 JB - CHINESE, EMUI 1.6
Pros:
The first STABLE Jelly Bean firmware
EMUI is at 1.6 version, so it is not so ugly as in the first release
You can flash an ATX version via CWM/TWRP already rooted and with gapps.
Cons:
[FOR STOCK ROM]
Gapps not included, since it is a chinese version.
You have to download a language pack enabler (http://www.android-hilfe.de/attachm...6231-firmware-b708-jb-china-all-lang-b708.zip)
[FOR ATX ROM]
No real bugs atm, still testing
https://mega.co.nz/#!Wo4i0ShQ!ahoQ53MWp2ntLyxRKAvlWXHtsexew7kcvldw2kwRDvM (direct download)
http://goo.im/gapps/gapps-jb-20121011-signed.zip (gapps)
http://goo.im/devs/ibotpeaches/miuiandroid/releases/gapps/miuiandroid_gapps-4.1.2-small_signed.zip (gapps mini)
http://www.htcmania.com/showthread.php?t=749828 (link ATX thread)
https://mega.co.nz/#!hJwDVLIB!WyvCmF3YuXSt5O62Ay9QMnrXAY8l6s_imlSrEmk8kjs (ATX version for who come from an EMUI stock firmware)
https://mega.co.nz/#!tQ4UyCzZ!B0uzeFuZEUB6a8TGb6-cyxHBMVNs0x_UM7yuxByQE9c (ATX version for who come from other ROMs)
B709 JB - CHINESE, EMUI 1.6
Pros:
The same of B708 with some little fixes more
New baseband
Cons:
[FOR STOCK ROM]
Gapps not included, since it is a chinese version.
You have to download a language pack enabler (https://mega.co.nz/#!CgIBGJDS!SfrawzQszc74Z0TcNgORaDf95Udt-ch3us8F8x2PcDw)
[FOR ATX ROM]
Flashing it via custom recovery you won't upgrade the bb
No real bugs atm, still testing
https://mega.co.nz/#!DlohxJKZ!DDAQ529yE3oSL-ZA5FTxYAOuG_gOK_utTpahHJBDqTg (direct download)
http://goo.im/gapps/gapps-jb-20121011-signed.zip (gapps)
http://goo.im/devs/ibotpeaches/miuiandroid/releases/gapps/miuiandroid_gapps-4.1.2-small_signed.zip (gapps mini)
http://www.htcmania.com/showthread.php?t=766343 (link ATX thread)
https://mega.co.nz/#!UZwigRZa!FyRgLSz4_bBVrZsXhFc5Jz08aUFEX7wEfCyOpPoJ5Xw (ATX version for who come from an EMUI stock firmware)
https://mega.co.nz/#!gA4SkYLK!atEKrQHRhAVitk_dPQRLaXogtRkBX-w3O0mJl1oj-oM (ATX version for who come from other ROMs)
OTHER DOWNLOADS
USEFUL FOR EVERY ROM/FW YOU HAVE
EMUI CAM (definitely better)
All-In-One Tool
Gapps (there is a huge choice of modular, stock, micro, full,... for every android version)
SuperSU 1.80
U9200 Downloads by o-l-a-v
U9200 Downloads by Alobalobayeah (ITA) (Please read! It's not a copy of olav work, it's a mine personal, and different, work )
Bravia Engine*
* To make it work insert these strings in build.prop
ro.service.swiqi.supported = true
persist.service.swiqi.enable = 1
HAAAALP
SOME ADVICES FOR THE NEWBIEST
HOW TO FLASH A CUSTOM ROM
Do a backup of your apps (you can use Titanium Backup, Helium Backup, App2Zip,... obviously you need root; if you came from a stock firmware: either you root it, or you can use Huawei Backup, but don't forget to find also a way to backup this app or to download it in order to restore your apps after the flash)
Do a Nandroid Backup, ie a full backup with CWM/TWRP. To flash or emulate a custom recovery, if you don't know how to do it, you can use my tool (useful also for other stuff)
Wipe cache, dalvik and data (sometimes you need to wipe /system too)
Install zip from sdcard... (in twrp just "Install") > Select the rom
Reboot
PS: if you are UPGRADING to the newest version from the same rom (ex. MK 44.2 09/03 -> MK 44.2 02/04) you don't have to wipe neither data nor system, unless the same chef suggest to do it
HOW TO FLASH A STOCK ICS/JB FIRMWARE
Do a backup of your apps (you can use Titanium Backup, Helium Backup, App2Zip,... obviously you need root; if you came from a stock firmware: either you root it, or you can use Huawei Backup)
If you have flashed a custom recovery, go back to the stock recovery, or it won't work. If you don't know how to go back, you can use my tool (useful also for other stuff)
Download the intermediate pack
Create a folder in your sd and rename it "dload"
Copy the intermediate pack's update.app in dload
Create another folder in your sd and rename it "dloadold"
Download the stock firmware and place update.app in dloadold
Be sure that you have more than 85% of battery
Turn off the phone and reboot it pressing - and holding - vol+, vol- and power
The recovery will do the rest. At the end you will have the intermediate fw.
Now open the default file manager: delete dload and rename dloadold in dload.
Repeat the step 9.
PAY ATTENTION: If you download the JB Chinese version, remember that it's in chinese language! Anyway, you can flash with custom recovery a language enabler pack (download it here)
Code:
What's new:
[05/10/14]
[B]MAJOR UPDATE
Almost all roms updated
Fixed some dead links
Deleted abandoned roms[/B]
[05/07/14]
Updated MIUI V5 to version 4.7.4
Updated CM 11 to version 22/06/14
Updated LS 3.1 (by Spanorg) to version 04/07/14
Added LS 3.1 (by xyyx)
Added MK 44.4 by xyyx
Obscured link for MOKEE OS by Niisp, thread not found (don't know why)
[13/06/14]
Updated MIUI V5 to version 4.6.13
Updated CM11 by Niisp
Updated MK44.2 by Niisp
Updated LiquidSmooth 3.1 by Spanorg
[28/05/14]
Updated MIUI V5 to version 4.5.23
Updated MOKEE 44.2 to version 27/05 -> NEW KERNEL, NEW GOVERNORS, NEW SCHEDULERS
Updated CM 11 by NIisp to version 26/05 -> NEW KERNEL, NEW GOVERNORS, NEW SCHEDULERS
Updated CM 11 by Spanorg to version 16/05 -> Mooooore stability
Updated LIQUID SMOOTH by Spanorg to version 21/05
Updated AP to V8
[11/05/14]
Added LIQUID SMOOTH KK 3.0 by Spanorg
Added CARBON ROM by Niisp
Added RESURRECTION REMIX by Niisp
Updated MIUI V5 to 4.5.9 version
Updated MK 44.2 to 09/05 version
Updated CM 11 by Niisp to 10/05 version
Inserted BT FIX in CM11 by Spanorg
Inserted SCREEN_RECORD FIX in OMNIROM by Spanorg
[04/05/14]
Updated MIUI V5 to 4.4.25 version
Updated CM 11 by Niisp to 02/05 version
Updated OMNIROM by Spanorg to 26/04 version
[24/04/14]
Updated MK 44.2 to 22/04 version
Updated CM 11 by Niisp to 21/04 version
[18/04/14]
Updated MIUI to 4.4.18
Updated MK 44.2 to 13/04 version
Updated CM 11 by Niisp to 11/04 version
[09/04/14]
Updated MIUI V5 by Helinchun to 4.4.4 version
Updated CM 11 by Niisp to 05/04 version
Updated CM 11 by Spanorg to 02/04 version
Updated OMNIROM by Spanorg to 08/04 version
[02/04/14]
Updated MOKEE 44.2 to the 02/04/14 version, NOW BLUETOOTH WORKS :D
Added haaaalp section
[01/04/14]
Updated MIUI V5 to 4.3.28
[19/03/14]
Updated MOKEE 44.2, now radio fm works
Updated gapps by TestUser0072 for CM 10.1 and CM 10.2
[17/03/14]
Updated MIUI V5 to 4.3.15
Updated OMNIROM to 08/03/14
[08/03/14]
Updated MIUI V5 to 4.3.7
Updated MOKEE 44.2 -> A lot of news :D
Updated CM 11 by Niisp
[01/03/14]
A little restyling of the thread
Updated OmniROM to 27/02/14 version
Updated CM 11 by Spanorg to 01/03/14 version
Updated CM 11 by Niisp to 25/02/14 version
Updated MK 44.2 by Niisp to 01/03/14 version
Deleted CM 11 by ATX: there are better kk roms
[26/02/14]
Added OmniROM by Spanorg
Updated AP to version 7.7
[23/02/14]
Updated MIUI to version 4.2.21
Added two new roms: MK44.2 & CM11 by Niisp
[20/02/14]
Updated MIUI to version 4.2.14
Updated CM11 by Spanorg to 4.4.2 version
A little correction in B709 ROM -> "Cons: If you install the ATX version you won't upgrade the baseband"
[13/02/14]
Updated CM10.1 to version of 10/02/14 -> Now compiled with Linaro :D
Added a new CM11 ROM :D All seems to work
[09/02/14]
Updated MIUI to version 4.2.7
Updated CM10.1 to 05/02/14 version
Updated CM10.1 and CM10.2 with newer gapps by testuser0072
[29/01/14]
Added new rom!:D PACMAN by Niisp -> Needs testers
Added B709 & B709_ATX
Updated MIUI to version 4.1.25
Updated MOKEE OS thread's link
[22/01/14]
Now direct links are more... direct xD
Updated MIUI to the 4.1.17 version.
Updated gapps by TestUser0072 for CM 10.1 and 10.2
Updated AP to version 7.6, a lot of news :D
[13/01/14]
Updated MIUI to the 4.1.10 version.
Updated AP to version 7.5.4. Now all bugs are fixed!!! :D
Updated CM 10.2 and CM 10.1 Gapps by Testuser0072
Updated CM 10.2 title to the 18/12 build (I have totally forgotten, sorry; but download link was already updated).
Thanks to: @testuser0072 for gapps; @o-l-a-v for some download links; @aaaa00 for his contributes here and on his page, @MatVekk, and @iker_92, for giving me a help with this thread; all the people who help me in this thread writing updates and tips in comments; all the developers of this fantastic phone
[ROM] AP_V5 by Mcdonald
Reformulated rom, purged of most of Huawei and with very little customization.
Base B315/534
The rom has stock toggles, brand new bootanimation, e-mail and generic Huawei.
Free ram always above the 400 mb,
very fast and slightly modified kernel.
Charging Animation works.
Rom_V3: http://dh.st/HmK
Add on: http://dh.st/I5U
Update_V5: http://dh.st/8PZ
Full wipe, flash V3, addons, and start the phone, configure and after flash v5_update.
Important as always you first set up the apn.
[ROM] AP v7 by Mcdonald
http://www.androidiani.com/forum/modding-huawei-ascend-p1/336483-rom-ap_7-5-a-13.html#post4780016
Finally, I was hoping there is a thread like this for Ascend p1 in xda. And now I found it :victory:
I have read in another forum that CM 10.1 by faust and maxrink are the most stable and all fully working.
I'm downloading CM 10.1 by faust right now.
By the way, here is another stable ROM and most fully working for daily use:
MOKEE OS:
ext SD as default:
https://disk.yandex.com/public/?hash=K/0EtgwZD9PK8zgfhrFF4ZHr%2BomImPAb3g9KnjcGf5c%3D&locale=ru
int SD as default:
https://disk.yandex.com/public/?hash=SBoS78Rfg7P/IN02xCcIznRvNQm8RuWPcy5In1ylKU4%3D&locale=ru
davidben73 said:
Finally, I was hoping there is a thread like this for Ascend p1 in xda. And now I found it :victory:
I have read in another forum that CM 10.1 by faust and maxrink are the most stable and all fully working.
I'm downloading CM 10.1 by faust right now.
By the way, here is another stable ROM and most fully working for daily use:
MOKEE OS:
ext SD as default:
https://disk.yandex.com/public/?hash=K/0EtgwZD9PK8zgfhrFF4ZHr+omImPAb3g9KnjcGf5c=&locale=ru
int SD as default:
https://disk.yandex.com/public/?hash=SBoS78Rfg7P/IN02xCcIznRvNQm8RuWPcy5In1ylKU4=&locale=ru
Click to expand...
Click to collapse
Very good!! can you link me the original thread where they talk about this ROM please? (It is from 4pda right?)
Inviato dal mio U9200 utilizzando Tapatalk
OP updated with new roms and a new clear graphic
Alobalobayeah said:
Very good!! can you link me the original thread where they talk about this ROM please? (It is from 4pda right?)
Inviato dal mio U9200 utilizzando Tapatalk
Click to expand...
Click to collapse
of course friend.
here's the original link http://4pda.ru/forum/index.php?showtopic=441214&st=1320#entry26163783
tribute to niisp (4pda)
which rom the most stable one? stock or custom doesnt matter
AP 7.5 > the addon pach (7.5.2) had been updated and is missing in the spoiler
Mokee Updated!:
MK42.2.RC5-EXT-viva-20131203-UNOFFICIAL
MK42.2.RC5-INT-viva-20131202-UNOFFICIAL
There is a MOKEE 4.3 [/B]too, works but same problems of CM1.2
PACman - PAranoid + Aokp + CM (working ones only, tested by me)
- FAUST93 for V22.1 (02may13) : http://goo.im/devs/faust93/pacman/viva_PAC_JB_4.2.2-v22.1.0_20130502-210004.zip
- MAXRINK for v23 (07sep13): pac_viva_4.2-_20130907-185950.zip (146.7 MB)
Beanstalk 1.300 by niiisp (http://4pda.ru/forum/index.php?showtopic=441214&st=800) untested by me
:good:
ps: alobalobayeah you can use INDENT | -> to create grey 'boxes'
aaaa00 said:
AP 7.5 > the addon pach (7.5.2) had been updated and is missing in the spoiler
Mokee Updated!:
MK42.2.RC5-EXT-viva-20131203-UNOFFICIAL
MK42.2.RC5-INT-viva-20131202-UNOFFICIAL
There is a MOKEE 4.3 [/B]too, works but same problems of CM1.2
PACman - PAranoid + Aokp + CM (working ones only, tested by me)
- FAUST93 for V22.1 (02may13) : http://goo.im/devs/faust93/pacman/viva_PAC_JB_4.2.2-v22.1.0_20130502-210004.zip
- MAXRINK for v23 (07sep13): pac_viva_4.2-_20130907-185950.zip (146.7 MB)
Beanstalk 1.300 by niiisp (http://4pda.ru/forum/index.php?showtopic=441214&st=800) untested by me
:good:
ps: alobalobayeah you can use INDENT | -> to create grey 'boxes'
Click to expand...
Click to collapse
Thanks ! Merci ! Danke ! Gracias !
Sent from my Nexus 7 using XDA Premium 4 mobile app
aaaa00 said:
AP 7.5 > the addon pach (7.5.2) had been updated and is missing in the spoiler
Mokee Updated!:
MK42.2.RC5-EXT-viva-20131203-UNOFFICIAL
MK42.2.RC5-INT-viva-20131202-UNOFFICIAL
There is a MOKEE 4.3 [/B]too, works but same problems of CM1.2
PACman - PAranoid + Aokp + CM (working ones only, tested by me)
- FAUST93 for V22.1 (02may13) : http://goo.im/devs/faust93/pacman/viva_PAC_JB_4.2.2-v22.1.0_20130502-210004.zip
- MAXRINK for v23 (07sep13): pac_viva_4.2-_20130907-185950.zip (146.7 MB)
Beanstalk 1.300 by niiisp (http://4pda.ru/forum/index.php?showtopic=441214&st=800) untested by me
:good:
ps: alobalobayeah you can use INDENT | -> to create grey 'boxes'
Click to expand...
Click to collapse
Updated!
PS: what do you mean with gray boxes (I'm saying: to do what? xD)
To highlight text, under the title for example.. I've just discovered this function.
PS: the AP v5?
there is also a Marismillas b534 with additional governor and features (if someone remove the emui gUi & apps.. it will be ok!)
aaaa00 said:
To highlight text, under the title for example.. I've just discovered this function.
PS: the AP v5?
there is also a Marismillas b534 with additional governor and features (if someone remove the emui gUi & apps.. it will be ok!)
Click to expand...
Click to collapse
Aaaaaah ok, if there will be an occasion to use it I'll do 4 ex I was thinking to add pros and cons of every ROM and l could put them in these grey boxes.. besides it, when I have more time I'll add marismillas one (are you sure it works well? I didn't tried it: if you know that it is a good ROM without important bugs I'll add it in the next edit Remember that thread's title is "All the GOOD-WORKING ROMs for p1")
Oh, why have I to put AP5? Isn't AP7.5 better? (I don't know, I'm asking )
Inviato dal mio U9200 utilizzando Tapatalk
OP updated, added new MIUI, the 3.12.6 and updated gapps of CM10.2
Will be great if you write after every ROM, the date when you updated it lastly.
This is just advice, because for example, everyone see when you change the first post, but no one knows wich ROM and link to it, you update
bmasgone said:
Will be great if you write after every ROM, the date when you updated it lastly.
This is just advice, because for example, everyone see when you change the first post, but no one knows wich ROM and link to it, you update
Click to expand...
Click to collapse
Thank you for your advice when I'll have more time so I'll insert a kinda changelog
Inviato dal mio U9200 utilizzando Tapatalk
I suggest you to flash the AP 7.5.3 !
the best choose for radio-FM lovers and Android Pure fun. It is very smooth and stable. I use it from 3 months and works very well (70+ user apps). Kernel b705 will be updated to 707 in January to solve HUAWEI video forwarding bug (and probably increase battery performance).
Emui was been suppressed, you find the Classic firmware-based Ui.
Battery life more improved, very very good work.
(Looking at next major update with b707)
AP v7 is the way.
Happy Christmas
aaaa00 said:
I suggest you to flash the AP 7.5.3 !
the best choose for radio-FM lovers and Android Pure fun. It is very smooth and stable. I use it from 3 months and works very well (70+ user apps). Kernel b705 will be updated to 707 in January to solve HUAWEI video forwarding bug (and probably increase battery performance).
Emui was been suppressed, you find the Classic firmware-based Ui.
Battery life more improved, very very good work.
(Looking at next major update with b707)
AP v7 is the way.
Happy Christmas
Click to expand...
Click to collapse
Sorry but I did actually flashed the CM10.2 today aaand, it feels good If I change idea, I'll probably install AP 7.5.3
Anyway, Merry Christmas to you too
agritux said:
which rom the most stable one? stock or custom doesnt matter
Click to expand...
Click to collapse
All these roms are really stable... Often it's a personal "taste".
According to me, I prefer B704_ATX, CM10.2 and AP7.5.3
I remember that bt not works properly in slimbean and CM10.2/CM11 based roms.. Are you sure that these are working fully ?
> Slimbean project has been abandoned < :'(
aaaa00 said:
I remember that bt not works properly in slimbean and CM10.2/CM11 based roms.. Are you sure that these are working fully ?
> Slimbean project has been abandoned < :'(
Click to expand...
Click to collapse
In the last version Spanorg fixed a lot of issues related to Bluetooth.. Regarding CM11, yes it is true that Bluetooth doesn't work, but for the rest it is really stable so why not insert it in this guide? And yes, Slimbean is stopped at the v7 but almost it is pretty fluid
Inviato dal mio U9200 utilizzando Tapatalk
I have been sharing my CM7/CM9/CM10/CM10.1/CM10.2-based builds for some time in several thread, which culminated in the MackayROM. I continue now with KK4.4 from where I was for JB4.3. MackayROM is based on CyanogenMod sources, with several performance enhancements.
About Cyanogen: CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
If you run into errors, I may not be able to solve it!
If you know a solution to a problem, either upload it yourself to Gerrit Code Review or contact me through pm.
The ROM is based on Cyanogen sources with the following changes:
-Mackay Kernel:
-Set of cherries picked from gerrit (differing by the day)
-Some additional patches I did myself to the source code
Feature request are OK, but remember:
1. I try to stay close to stock
2. I will not include additional apps, unless they can be build from source
3. The time I spend on features depends on how much I like them myself
Although it is possible to enable ART, this is not advisable:
-Takes long to convert from Dalvik to ART on first boot
-Needs more RAM
-Can cause soft reboots
But off course, YMMV -> light users may have better luck
Changelog of 4.9.14 - 5-Nov-2014
-CM11.0 codebase of 3-Nov-2014
-TWRP updated to 2.8.1.0
Full changelog of 4.9.14 compared to stock CM11.0:
CM11.0 sources of 3-Nov-2014
Mackay kernel:
Separate kernel thread: http://forum.xda-developers.com/showthread.php?t=2532813
TWRP (2.8.1.0):
-Themed orange
-Run recovery-apps (zip files should be present in /system/mackay, launch them through advanced->run app)
Removed apps:
-VideoEditor & demo VideoFiles
vendor/cm:
-Adapt for custom MackayROM building (bootanimation, ROM&file name)
-Custom bootanimation (Thanks to Malcho)
vendor/samsung:
-Added scripts for Mackay Settings
hardware/samsung:
-F4k 720p patch for bigmem kernels
AriesParts (“Mackay Settings” in Settings menu):
Add mackay kernel settings options:
>WiFi PM mode selection
>BLX settings
>BLN activation
>Navbar selection
>Low RAM mode selection
For other projects (frameworks/base & Settings, check my github for the latest patches)
Coming from stock Samsung ROM/CM7:
-The safest way is to flash CM9 first and then flash Mackay ROM. Going directly from Samsung ROM/CM7 to Mackay ROM may lead to loosing IMEI.
Fresh install:
Can be flashed on top of any CyanogenMod build:
-Do a factory reset
-Flash ROM
-Flash gapps
-Reboot your phone
Update:
-Flash ROM
-Reboot your phone
(no wipes or other things needed, just flash & reboot)
-Custom kernels can be used only if specific for KK4.4
Credits:
-teamhacksung/pawitp for making CyanogenMod work on our ancient phone
-stratosk/DerTeufel/Mialwe for the inspiration I got from their kernels
-rootax for providing a high-speed server for high quality downloads
-Malcho for his kernel splash & bootanimation
Downloads:
Basketbuild
Google Apps
Nano Gapps
For those who want to theme it even further, Bejda made a Mackay splash screen!
http://forum.xda-developers.com/showthread.php?t=2214468
To download the same kernel, but then with voodoo colour, or with CWM:
Basketbuild
XDA:DevDB Information
[KK 4.4.4][ROM]Mackay ROM, ROM for the Samsung Galaxy S I9000
Contributors
kasper_h
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2013-11-16
Last Updated 2014-09-21
Reserved
10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.
kasper_h said:
10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.
Click to expand...
Click to collapse
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?
marcinowozniako said:
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?
Click to expand...
Click to collapse
Kernel is TWRP-only at the moment.
Download link on XDA fileserver has been restored. Download link on rootaxbox will take quite a bit more time, needs a full re-upload & uploadspeed is very slow ATM.
Oh.
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job
Galaxy3HELL said:
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job
Click to expand...
Click to collapse
I think this will come soon, but I won't work on that
kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet
limnaln said:
kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet
Click to expand...
Click to collapse
I always build these ROMs myself from CM sources + my own additions to CM sources, so no need for "official" CM11 builds to enable my own ROMs to be build.
kasper_h said:
I think this will come soon, but I won't work on that
Click to expand...
Click to collapse
Can I install your kernel on CM11?
marcinowozniako said:
Can I install your kernel on CM11?
Click to expand...
Click to collapse
I have no separetely flashable kernel yet...
this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?
rajeshbabushrestha said:
this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?
Click to expand...
Click to collapse
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.
thank you for this:good:
kasper_h said:
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.
Click to expand...
Click to collapse
Thanks for KK rom :good: :good:
OP's link to Gapps contains five different builds- some with ART compatibility. Is there a preferred one? ART works/tested, or better stick to delvik for a little while?
A few things I noticed:
- If I select Performance settings from Mackay app, Settings force closes.
- Orientation tile is buggy, sometimes it seems to work, sometimes not.
The ROM is very snappy, thank you very much for your work!
Kasper_h installed this rom and I have a bug. When I want to enable high-speed data connections settings crashes me the error: com.android.systemui and closing forces. Framework to overloads.
Thanks for the rom, There isnt any bug list?
Installed on CM11 and works fine.No forced closure and fast enough to be a test.
so no separate kernel 0.600
Hey, everyone! This is the CyanogenMod (Modded) ROM that I have made! I have made two versions, one is the CM11
DOWNLOADS
MOD EDIT: Links removed until permission, credits and kernel source is obtained and posted
TThank you for downloading! Nightlies are not guaranteed, but Monthlies are almost 100% guaranteed.
Instructions
1.) Install TWRP or CWM Recovery.
2.) Install the files onto your device.
3.) Boot into recovery. (PRESS VOLUME UP + HOME + POWER UNTIL IT SAYS "BOOTING INTO RECOVERY")
4.) BACKUP YOUR PHONE. I AM NOT RESPONSIBLE FOR WHAT HAPPENS TO YOUR DEVICE, THIS IS PURELY EXPERIMENTAL.
5.) Factory Rest.
6.) "Install zip," then choose the GApps and the cm-10.2 MOD file.
That's it! Reboot, and you SHOULD have cm-10.2 modded!
Basically, it changes sounds, and some of the boot animations. Review how it is in the Reviews tab!
CAUTION, THIS IS ONLY A TESTING FILE. IT IS CURRENTLY NOT TESTED, ALTHOUGH THE CM FILE THAT WAS MODDED WAS MADE FOR THE D2TMO.
XDA:DevDB Information
[EXPERIMENTAL] CyanogenMod 10.2 MODDED, ROM for the T-Mobile Samsung Galaxy S III
Contributors
cyanogen_patrick
ROM OS Version: 4.3.x Jellybean
ROM Firmware Required: d2tmo, Samsung Galaxy S3 T-Mobile, Android 4.1.2
Based On: CyanogenMod
Version Information
Status: Testing
Created 2014-11-25
Last Updated 2014-11-27