Hey, everyone! This is the CyanogenMod (Modded) ROM that I have made! I have made two versions, one is the CM11
DOWNLOADS
MOD EDIT: Links removed until permission, credits and kernel source is obtained and posted
TThank you for downloading! Nightlies are not guaranteed, but Monthlies are almost 100% guaranteed.
Instructions
1.) Install TWRP or CWM Recovery.
2.) Install the files onto your device.
3.) Boot into recovery. (PRESS VOLUME UP + HOME + POWER UNTIL IT SAYS "BOOTING INTO RECOVERY")
4.) BACKUP YOUR PHONE. I AM NOT RESPONSIBLE FOR WHAT HAPPENS TO YOUR DEVICE, THIS IS PURELY EXPERIMENTAL.
5.) Factory Rest.
6.) "Install zip," then choose the GApps and the cm-10.2 MOD file.
That's it! Reboot, and you SHOULD have cm-10.2 modded!
Basically, it changes sounds, and some of the boot animations. Review how it is in the Reviews tab!
CAUTION, THIS IS ONLY A TESTING FILE. IT IS CURRENTLY NOT TESTED, ALTHOUGH THE CM FILE THAT WAS MODDED WAS MADE FOR THE D2TMO.
XDA:DevDB Information
[EXPERIMENTAL] CyanogenMod 10.2 MODDED, ROM for the T-Mobile Samsung Galaxy S III
Contributors
cyanogen_patrick
ROM OS Version: 4.3.x Jellybean
ROM Firmware Required: d2tmo, Samsung Galaxy S3 T-Mobile, Android 4.1.2
Based On: CyanogenMod
Version Information
Status: Testing
Created 2014-11-25
Last Updated 2014-11-27
Related
OmniROM Galaxy 551/Callisto port [OmniARMv6]
Current port status: beta - may not be suitable for daily use. For experienced users only.
Latest Google Apps package: not yet available
Pre-requisites:
ClockworkMod or TWRP recovery
Initial install:
Download the latest build that supports OTA updates from: http://dl.androidarmv6.org/callisto
Reboot to recovery, wipe data and install the update package normally.
How to perform OTA (over the air) update:
Go to Settings -> About phone -> System updates. The latest diff between your current ROM and the latest build will be downloaded, which will be used to create a new update zip in the /sdcard/OpenDelta folder.
If you are using OmniARMv6 TWRP recovery, it can flash the new update automatically [not yet tested].
If you are using CWM recovery, you can flash the patched package (/sdcard/OpenDelta/omni-*.zip) manually.
Source:
Complete project: https://github.com/omniarmv6
Device (note: relies on shared device configuration): https://github.com/omniarmv6/android_device_samsung_callisto
Kernel: https://github.com/androidarmv6/android_kernel_samsung_msm
Reserved #1
Reserved #2
I have tested and found camera is not working , document (file manager) unable to open apk file and need some work on lock screen except that rom is smooth.
Thank for creating thread.
thanks
ROM is very smooth and fast. Works much faster than CM11.
Very thanks
@psyke83 omni rom will be used kernel 3.×.× as per source given above.
@psyke83 omni project has been abanded ? after bunch of ota failed ota disappeared from Jenkins. This rom is smooth and fast except few problems like camera,keyboard back light and lock screen resize.
Last builds (also for other devices) are dated June 15. And the last Android version was 4.4.3. Is it just a build process that got stuck, or is it more serious?
Links are down!
Hey man,
Thank you and others in armv6 team for their incredible work. You guys brought CM11 to a number of devices and that's a BIG DEAL.
Since our device is quite old now, I can see why the project died.
Now, the only thing we want is the links of the latest stable (RC) builds of the devices hosted somewhere. I can (at-least) host (CM11 and OMNI) stable builds of callisto in my GDrive.
Anyone knows what the license for ready-built ROMs is? That is, if the original source goes down, would anyone be allowed to upload a copy?
I'm not thinking about modified images yet - but it'd be easy to make people download something that isn't identical to the original thing, and the md5sum files have also gone - would archive.org be able to help? https://web.archive.org/web/*/http://download.androidarmv6.org/_builds/callisto/* seems to return something at least
Can Someone reupload this?
Here is CM10 for IONs with UNLOCKED bootloaders only. It is for those who want the latest stable version of Cyanogenmod, which is based on JB 4.1.2.
This rom was built from Cyanogenmod's latest sources on April 29. The build includes CM10 custom kernel.
I have made some changes in the code (before compiling) to fix problems with Android OS draning battery, changed default network to LTE/GSM, as well as addressed incorrect battery value in framework-res.apk. OEM dock settings have also been enabled.
Install Instructions:
1. Have root and CWM or TWRP recovery
2. Mount system/cache/data and format each in CWM or just format the same in TWRP
3. Install the rom
4. Hit thank you and enjoy
Credit: Cyanogenmod Team
SOURCES: https://github.com/CyanogenMod/android/tree/jellybean
WARNING: This release is for UNLOCKED bootloaders only. Users with locked bootloaders should get this version: http://forum.xda-developers.com/showthread.php?t=2689821
As usual, I am not responsible for the death of your device or those in the immediate vicinity... You have been warned. I am not going to "laugh hard" at you (which would be mean), but don't expect any pity or guidance. :laugh:
XDA:DevDB Information
CM10-Aoba for UNLOCKED Bootloaders, a ROM for the Sony Xperia Ion
Contributors
optimumpro
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 10.0
Stable Release Date: 2014-04-29
Created 2014-04-30
Last Updated 2014-04-30
Reserved
Reserved
Thx waitin for cm11. :good:
hdmi audio not working
rom seems to be good and smooth . but hdmi audio not working, hdmi video is working
Go back from CM 11 to 10
Pro_SmarT said:
Thx waitin for cm11. :good:
Click to expand...
Click to collapse
Want to try this old version because the last one has various bug with connectivity, video recording, clock, date (caused by TeamWin Recovery) and battery life isn't good. With the previous ics 4.0.4 it was of 2 days and 11 hours, but with intensive use 28 hours. The KK 4.4.4 give me only 22 hours and with intensive use half-day.
Bug:
Date and time won't automatically update and reset after shutdown/reboot.
Based On: Samsung TouchWiz.
Multilanguage-not included. rus,english,chinese,ukrainian fully translated.
Gapps-not included.
Download Links:
1. <Mod Edit Link Removed>
2. Xda
Install instructions:
- Reboot to CWM
- if you are coming from other rom (full wipe)
- install zip from SD-card, select miuiandroid
- REBOOT
Bugs: xperia keyboard eats a lot of battery,
bag fix samsung keyboard: com.google.android.tts-1.apk
Thank you wanam - for his kernel.
XDA:DevDB Information
MIUI_5.1.14_Rus, ROM for the Samsung Galaxy S 4
Contributors
rullert
ROM OS Version: 4.4.x KitKat
Version Information
Status: Abandoned
Created 2015-02-17
Last Updated 2015-04-01
I9505XXUDMI1-PRE-ROOTED-ODEX-AdamKernel-4.2.2CWMbeats
[ROM] [I9505] [4.2.2]
Download Link:
1.<Mod Edit Link Removed>
2. http://forum.xda-developers.com/devdb/project/dl/?id=11192
He perepaeval and insert the new sound engine, Xposed Installer, Wanam Xposed, cleaned.
Thank you DjeMBeY. base rom.
Thank you wanam for his kernel, Wanam Xposed.
Thank you noskojv sound engine.
Detailed instructions how to install custom CWM recovery stage.
Attention !
After execution of the instruction you ticnet hardware counter from 0 to 1 on the warranty is affected only if the damaged processor (was severely overheated custom kernel,the rest is done under warranty)and it never will be KNOX!!!
Install Custom CWM recovery stage.
Download CWM twrp or CWM philz_touch below (File extension tar.md5 or tar)
1.Run Odin from the administrator.
Turn off the phone and start it in Download mode. (Press volume down+power button until the appearance of an exclamation mark, then the volume button up)
Plug lights up SOM
2.Click PDA and select the file which is downloaded, Click Start
The phone quickly reloaded, need to have time to press volume up+power key simultaneously until blue lettering at the top, then quickly release both buttons (if you don't have time phone reboots, erases [CWM Advanced Edition] PhilZ Touch and put back the stock recovery stage also erases if rebooted a second time. Custom firmware to put immediately after entering the menu CWM recovery stage for the first time, as the stock firmware erases CWM and put back the stock recovery stage, in this case, repeat steps 1,2.
Feature install custom firmware in CWM PhilZ Touch: to do always wipe data+wipe cache, then choose install zip, then the path to the custom firmware. In CWM twrp only Faktory Reset.
To enter the recovery stage press:
Turn off the phone, then press the upper volume button + power button simultaneously held both buttons until the upper part of the screen appears blue inscription.
Note: the third button to press home anywhere is not required.
http://4pda.ru/forum/index.php?s=&showtopic=457948&view=findpost&p=34023348
rullert_I9505XXUGNK4.zip
http://www.needrom.com/download/ge-5-0-repack-nd-beats-eqrullert/
rullert said:
Install instructions:
- Reboot to CWM
- if you are coming from other rom (full wipe)
- install zip from SD-card, select miuianfroid
- REBOOT
XDA:DevDB Information
MIUI_5.1.14_Rus, ROM for the Samsung Galaxy S 4
Contributors
rullert
Source Code: https://yadi.sk/d/beQpj0Y9ejsfz
ROM OS Version: 4.4.x KitKat
Version Information
Status: Abandoned
Created 2015-02-17
Last Updated 2015-02-17
Click to expand...
Click to collapse
First
Thannks for the Rom. is it 4.4 based?
Tw? Cm 11 based unified developement
Enviado desde mi GT-I9505G
miui v5?
Is the shame baseband of shiros......
Enviado desde mi GT-I9505G
So thats touchwiz based or cm?
It is more likely to be TW based because the .zip file is over 800MB... The CM based ROMs are lighter compared to TW based ones.
Bad op, you should at least tell
- whitch base rom you use
- from whitch device you ported
- add a few screens
- tell whats working and whats not
Its your first rom thread so it ok, learning by doing
But pls change at least the things i mentioned above.
rullert said:
On the basis of TW.
Status: Abandoned
Created 2015-02-17
Last Updated 2015-02-17
Click to expand...
Click to collapse
...
fedef12evo said:
miui v5?
Click to expand...
Click to collapse
Edit: Seems indeed to be v5
The ROM has also been posted here
Hello,
Some questions :
- Where is the download link ?
- Is multilanguage included ?
- Are Gapps included ?
BTW thanks for sharing it, Miui is the best rom ever
Anyone tested it ?
What's the battery life ? Lag ?
Yoz182 said:
Hello,
Some questions :
- Where is the download link ?
- Is multilanguage included ?
- Are Gapps included ?
BTW thanks for sharing it, Miui is the best rom ever
Click to expand...
Click to collapse
All that questions are answered ant the first post
Razov said:
All that questions are answered ant the first post
Click to expand...
Click to collapse
Yes, now it is.
It wasn't 6hrs ago
Yoz182 said:
Yes, now it is.
It wasn't 6hrs ago
Click to expand...
Click to collapse
Sorry then mate, did u try this?
No, I've downloaded it but can't install at the moment.
I'm at work and have un-rooted my phone yesterday, waiting for Lollipop OTA :crying:
Maybe I will try it tomorrow, will take my computer to root again
Galaxy S4 I9505
5.0.1 Lollipop
Pending...
http://samsung.youmobile.org/
rullert said:
Galaxy S4 I9505
5.0.1 Lollipop
Pending...
http://samsung.youmobile.org/
Click to expand...
Click to collapse
Why you publish the rom and say it is abandonned ?
I don't understand..
Sent from my GT-I9505 using XDA Free mobile app
Here is Pure AOSP 5.1.1 r.8. Just a proof of concept. Camera is NOT working. Everything else does. Kernel includes all latest camera commits, but despite their claims "Welcome Sony Camera", it does not work. By the way, all my hardened features are included. Also, wide selection of networks, volte, et all....
I built this rom yesterday with Sony vendor branch and obviously, there was no baseband, but today, I switched vendor to that of FXP and there is a fully working GSM/Data.
Fox! With the exception of a quicker boot (because boot animation is really light), there is NOTHING that makes this rom stand out or any better than Dirty Unicorn or Paranoid Android. The rom isn't lighter, isn't faster + a lack of features. Granted, there is no CM bloat, but there isn't any CM bloat in DU or PA. This is my opinion, of course...
Instructions:
1. Don't flash this in recovery, it is not a flashable zip
2. Unzip the file, you will get boot.img, system.img and userdata.img
3. Flash in fastboot: fastboot flash system system.img, then fastboot flash userdata userdata.img
4. Don't flash boot.img If you want to have Supersu or a file manger (as Documents does not show in UI), instead, reboot in recovery, (your old kernel) and flash Supersu and CM file manager, then reboot in fastboot again
5. In fastboot: fastboot flash boot boot.img
6. Reboot and enjoy
To return to your regular rom, you will have to fastboot your old kernel with recovery and then restore...
Credit: AOSP, FXP, Sony
Download: http://forum.xda-developers.com/devdb/project/dl/?id=13614
Kernel Source (this is 3.10): https://github.com/sonyxperiadev/kernel
My Changes in Kernel: https://github.com/AOSPME/kernel/commit/d1682c9b91cf14f561e86982171c9683be07d8b6
XDA:DevDB Information
Pure AOSP, ROM for the Sony Xperia Z1
Contributors
optimumpro
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP
Version Information
Status: Testing
Created 2015-07-21
Last Updated 2015-07-20
Hi, I'm new here (and I don't have my phone rooted and unlocked bl. I have it only for one month ), but I watch sony's repo on github and today I saw this: https://github.com/sonyxperiadev/device-sony-rhine/commit/46364f36bcefda1c838f28ac7c586826d394577c I think it may fix the camera, but I'm not sure. Can you build a new build ? Thank you.
SuperLamic said:
Hi, I'm new here (and I don't have my phone rooted and unlocked bl. I have it only for one month ), but I watch sony's repo on github and today I saw this: https://github.com/sonyxperiadev/device-sony-rhine/commit/46364f36bcefda1c838f28ac7c586826d394577c I think it may fix the camera, but I'm not sure. Can you build a new build ? Thank you.
Click to expand...
Click to collapse
They are slowly moving towards enabling camera. But I think once it fully works, they will announce that and with a big bang. Last time I tried after they screamed "welcome Sony camera", and then when it didn't work, they said: What, did you expect the camera to work based on kernel driver only? LOL. No, I expected the camera to work because they said "welcome Sony camera." So, because it takes time, I'll wait until the camera is really there...
Again, don't worry, when it really works, they'll say so...
temasek's UNOFFICIAL CM12.1 BUILDS
UNOFFICIAL ROM MAINTAINER THREAD
I did not create this rom 'm just sharing all the credits are the moonlight.
The lastest version TWRP (2.8.7.0) or PhilZ Touch recovery is recommended.
Installation:
Clean Installation
1. Download the ROM.
2. Download the GApps.
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
7.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
8. Flash the GApps.
9. WIPE DALVIK/CACHE (for good measure).
10. Reboot Device.
Dirty Flash/Update
1. Download the ROM.
2. WIPE CACHE/DALVIK.
3. Install the update zip from recovery.
3.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
4. WIPE DALVIK/CACHE (for good measure).
5. Reboot Device.
Downloads:
Removed after the investigations! Thanks @krasCGQ
GApps
Credits:
@moonlight
@arter97
@temasek
@treborbr
Contributors:
moonlight
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod 12.1
Version Information
Status: UNOFFICIAL
Created 2015-09-26
Last Updated 2015-09-11
Reserved!
Reseverd!
One more!
First again......
Love CM..
Other ROMs should go to hell
Screen shot please...
Sorry I'm testing another rom now and I can not send prints . But you can see some in the post of the art s3: http://forum.xda-developers.com/gal...-temasek-s-unofficial-cyanogenmod-12-t3086689
Wow... temasek rom is here for s4 also.... i was using this in my s3....
Tq @treborbr for the rom....
Sent from my GT-I9500
thx for new rom for our device
Thanks for this new rom. I have a question. Does this rom have the same camera problem of the cm12.1 roms? If there is, it will be critical for me to use it.
The problem concerns ? I had no problem with me and it's based on cm with the latest changes .
The problem concerns camera. When i open it first no problem. Once you try again you face a strange problem. The camera doesnt shoot or open till you restart. This is a usual issue of CMs. But in some roms i didnt see this problem. If this rom doesnt have this issue i can try it.
Screenshots please!
I tried this rom. I havent seen any bugs yet. But sometimes last apps are laggy. When you download a file the browser give fc and closes itself theb the download begins. Thats all. Thanks to the developers...
I would like to send some screenshots of the rom?