Develop Bugs

help with windows mobile wifi?

at my school, in order to use the wifi connection, you have to log in with your username and password(not like wireless password wep,wpa etc ). I can find and connect to the wifi but it will not work when i try surfing the web as i cannot seem to be able to enter in my username and password.
does anyone know of how to help me?

jopherr said:
at my school, in order to use the wifi connection, you have to log in with your username and password(not like wireless password wep,wpa etc ). I can find and connect to the wifi but it will not work when i try surfing the web as i cannot seem to be able to enter in my username and password.
does anyone know of how to help me?
Click to expand...
Click to collapse
that is probably your proxy server asking for user/password to let you out...

oh whoops i didnt state my problem.
i do not know where to be able to enter in this information to be able to access the internet.
certificates?
other things?
im not sure.
how do i enter in for certificate?

well, what do you have to do if you were to connect to your school's wifi with a laptop?
At my university, once you connect to the wifi and try to access a page it re-directs you to a page where you must login with your school assigned username and password. Once logged in I can surf just fine. I only use it in lecture halls that have no reception.

fone_fanatic said:
well, what do you have to do if you were to connect to your school's wifi with a laptop?
At my university, once you connect to the wifi and try to access a page it re-directs you to a page where you must login with your school assigned username and password. Once logged in I can surf just fine. I only use it in lecture halls that have no reception.
Click to expand...
Click to collapse
oh im not really sure i havent tried.
on tuesday i shall try it and come back

jopherr said:
at my school, in order to use the wifi connection, you have to log in with your username and password(not like wireless password wep,wpa etc ). I can find and connect to the wifi but it will not work when i try surfing the web as i cannot seem to be able to enter in my username and password.
does anyone know of how to help me?
Click to expand...
Click to collapse
Your school's proxy likely authenticates through Active Directory - which isn't, as far as I know, used in Windows Mobile (at least in any practical fashion). In an enterprise wireless environment, even a laptop may have to be plugged in via CAT5 cable first to obtain the proper certificate (something that isn't quite compatible with a mobile phone) - after that, it can authenticate on the wireless network. For this reason, some enterprise wireless networks offer a guest account with limited, more controlled acccess to the school's local network but it may, at the very least, give you access to the internet.
Sorry this isn't of much help, but it at least clarifies why you may not be able to access the internet. I did see this same question come up on the Experts Exchange website but they charge you to see the answer.

okay so i tried to connect to the wireless network on my laptop. it "connects" fine and dandy. What I mean is that the "connected" icon shows up. But the message that prompts me to enter in my username and password pops up after i open my web browser (firefox/chrome etc)
on my friends iphone. same thing. the popup shows up after you open up safari mobile.
is there really no way around this?

Are you using Opera or IE?
Opera in turbo mode will not let you authenticate.

Joe USer said:
Are you using Opera or IE?
Opera in turbo mode will not let you authenticate.
Click to expand...
Click to collapse
let me try it tommorow without turbo mode.

jopherr said:
let me try it tommorow without turbo mode.
Click to expand...
Click to collapse
Or just try it in Pocket Internet Explorer, Log in, then switch over to Opera.

fone_fanatic said:
Or just try it in Pocket Internet Explorer, Log in, then switch over to Opera.
Click to expand...
Click to collapse
ok i tried it today when i ran pie, there was no popup or prompt for me to sign in. neither was it there when i used opera w/o turbo.
anyother suggestions?

VPN problem

Exclamation VPN problem
hi all. I'm living in a country where nearly all sites (even facebook, youtube, twitter, friendfeed ...) have been filtered and we can not access them without vpn.
I use vpn on my pc and there is no problem using it but I can't have it on my ppc.
I setup everything in detail but when I try to connect I get the username/pass error which says:
VPN server problem. Verify your username and password, and try again. If the problem continues, turn the device off and try again
I've asked my vpn provider for mobile compatible IP and he has given me so, which he says works fine for iphone users. but I still have problem connecting to.
Click to expand...
Click to collapse
here are the info of the vpn I use:
server ip : us.parsns.co.cc
pars.services: VPN Type : L2TP
pars.services: key ya secret : r3102030a10
user: parsservice
pass: test
Click to expand...
Click to collapse
can anybody help please?

The name pings as 173.236.83.117, have you tried putting this in instead of the full name? also have you put the name/ip adress in your exceptions list? I believe you will need to!

Connecting Evo to my home wireless att dsl, help

I looked around the forum and searched on Google but was still skeptical how to connect my Evo to my home internet connection. I turn on my Evo WiFi, it shows my connection so I push connect. Then I see I am unable to to browse from my phone. I have a speedstream 5200 that is connected to my airlink wireless router. I would like to use my home internet so I can browse on my phone. I have a username and password that I have to put in, in order to log on such as my laptop.
Any help will be gratefully appreciated.
Also does this have to do anything with vpn?
Using my HTC Evo phone which I'm using Xda app to post

If your router has a password, the phone should prompt you to enter that. If not, your router could be using a weird security profile, maybe just try switching to WEP. Also, try unplugging the router's power for a minute, then plug it in. That usually fixes any problems with the router itself.

Ill try that and see. If anyone else has this type of issue and somewhat knows how to resolve this pls post. But thank you sitlet Ill give that a shot and respond back asap.

WEP/WPA/WPA2 will all prompt for a password when you try to connect.
A few things to check:
1) The SSID must be set to broadcast
2) make sure there isn't a MAC address filter turned on on the router.
3) if you have entered a password to connect, re-enter it to make sure it is correct.
HTC Evo
Rooted, but still stock...for now
----------------------------------------
The program is designed to work, if it's not, we have a problem.

Ok I did everything mentioned above and I can get into my router settings but I still can't figure out why my Evo won't use my att service. I see the "connect to, my router " but still can't actually connect to use the internet. Am I suppose to use a VPN? please help again my friends, thanks.
Using my HTC Evo phone which I'm using Xda app to post

OP, it sounds like your modem is passing on the PPPoE authentication to the connected client (your computer). What you need to do is have the modem do the PPPoE handshaking and pass a pure public IP back to your router, which then via NAT shares the internet connection across connected devices.
Reference page 21 (not pdf page, but actual page # printed at the bottom of the pages in the pdf) of your modem's owner's manual to provide your login credentials to the modem.
http://www2.windstream.net/downloads/links/SpeedStream211.pdf
On page 38, refer to configuring the modem for client mode.
You should configure your router for DHCP wan mode. You may need to adjust your MTU setting if there is one. I don't recall the exact procedure for dsl setups, but google "optimal mtu dsl" for information.
Finally, your computer should be set up for dhcp as well. When everything is working properly, you should not need to run any additional software on your computer to gain internet access. When this becomes so, your evo should be able to connect successfully to your wifi. Once you're able to do this, you can start implementing wireless security (wep/wpa/wpa2).
Edit: You're not clear what you're typing in when you reference logging in in one of the posts above. Are you supplying windows credentials, or your isp credentials ([email protected] or [email protected] or similar and password)?

[Q] Specifying a proxy to connect to the internet (Sense ROMs)

Is it possible to specify a proxy server address to connect to for accessing internet on our phones?
I use a proxy server to connect to the internet for my PC, I'd like to use the Internet-pass-through service but it doesn't work.
I've tried making a wireless(ad-hoc) network through my PC and shared the internet connection too but that doesn't work either.
I tried MIUI ROMs for a month or so before and they have the option to specify the proxy address in the settings itself. Is there any such option/tweak/mod/app for Sense ROMs that I might have missed?

Go to settings>>wireless&networks>>WiFi-settings. When on WiFi screen press menu button then advanced.
Sent from my Inspire 4G using xda premium

Duh! Thanks.. *feeling stupid*
btw, which protocol does the market use? I've configured the proxy address on my phone and its working fine for the browser but the market is reporting connection failure. The proxy that I'm using allows only HTTP/HTTPS.

[Q] Tinycam, IP webcam, and portforwarding

Guys I am in over my head here, I've watched way too many YouTube videos and guides and I still cant get this.
I have 2 galaxy nexus phones and I am trying to leave one at home running the app IP webcam and taking video. That phone will be connected to my WiFi network at home. Then I am trying to use my other nexus phone running Tinycam Monitor and connected to Verizon's 4g network, to connect to that phone and stream me live video from home.
Now basically I am looking for someone who has set this up correctly or who could help talk me through this.
I have set up a static ip address
I went to my linksys routers web address and tried to port-forward ports 8080 and 80 which are the ones I need
Its not working though and it keeps saying failed connection on the phone. I think I am just typing in something wrong or missing a step.
Can anyone try and help me through this?

Use your IP address and 100 instead of 80
Sent from my Galaxy Nexus using Tapatalk 2

vhgomez36 said:
Use your IP address and 100 instead of 80
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Where are you talking about? You mean when I am forwarding the port on the linksys web interface? It asks me for the internal and external port (which I am typing in 8080) and then it asks for the "to ip address"

I am really unsure of what to put in the "To IP address" field. It shows my ip address but leaves blank the last few digits. Am I supposed to get that information from the phone from which I will be viewing the video?

bhawks23 said:
Where are you talking about? You mean when I am forwarding the port on the linksys web interface? It asks me for the internal and external port (which I am typing in 8080) and then it asks for the "to ip address"
Click to expand...
Click to collapse
Example.

vhgomez36 said:
Example.
Click to expand...
Click to collapse
Thanks for the reply, but I am still a little confused on what you are trying to say.
When I start up IP webcam it begins the video and it gives me an ip address and port number to connect to it. (this phone is on home wifi)
When I type those detail in tinycam monitor on my other phone (connected to verizon network), I add a new camera, set it to IP webcam for android, type the the previous ip hostname and port but it always fails to connect
I understand I need to portforward the port I am using to allow it to connect but I dont think I am doing that correctly

Make sure you port forward on your router to allow the connection.
Sent from my PG86100 using xda app-developers app

bhawks23 said:
Thanks for the reply, but I am still a little confused on what you are trying to say.
When I start up IP webcam it begins the video and it gives my an ip address and port number to connect to it. (this phone is on home wifi)
When I type those detail in tinycam monitor on my other phone (connected to verizon network), I add a new camera, set it to IP webcam for android, type the the previous ip hostname and port but it always fails to connect
I understand I need to portforward the port I am using to allow it to connect but I dont think I am doing that correctly
Click to expand...
Click to collapse
What happens if you turn on Wifi on your phone? Does it work then? You need the public domain IP address where your DVR is connected. I have the info. at home. I'll grab it tomorrow in case you still need the info.

handle223 said:
Make sure you port forward on your router to allow the connection.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Yeah handle223 that is the step where I believe that I am messing up at. I followed a guide that said I need to port forward 8080 and 80 ports so I tried to do that. I'm just not sure what to enter into the "to ip address" field on linksys website. Am I supposed to put my computers ip or something from either of the phones?

vhgomez36 said:
What happens if you turn on Wifi on your phone? Does it work then? You need the public domain IP address where your DVR is connected. I have the info. at home. I'll grab it tomorrow in case you still need the info.
Click to expand...
Click to collapse
Yes it works fine when the phone is connected to wifi so I'm trying to get it to work while away from home on a mobile network. Yeah if you could help me out tomorrow that would be great. Thanks for the help already

bhawks23 said:
Yes it works fine when the phone is connected to wifi so I'm trying to get it to work while away from home on a mobile network. Yeah if you could help me out tomorrow that would be great. Thanks for the help already
Click to expand...
Click to collapse
There your problem...wrong IP address. I can help you more tomorrow when I get home.

vhgomez36 said:
There your problem...wrong IP address. I can help you more tomorrow when I get home.
Click to expand...
Click to collapse
Sounds good man thanks

Essentially, what you need to do is:
1. Set your home phone up with a static IP address. You can normally do this by connecting your phone to wifi, and then going to the control interface for your router and fixing the IP address to that device (look under DHCP settings).
2. Forward an external port (e.g. 8080) of your static home IP address to the http port (80) on the IP address you just assigned permanently to your home phone. This will be under port forwarding in your router interface. The internal port is the one the home phone tells you when you start the webcam program.
3. Contact your ISP and ensure that a) you have a static IP (if not, you can register a dynamic one at e.g. dyn.com, and get software which will update it periodically); and b) that port 8080 is not blocked at their end. You can check your home external IP address on your router page, or if you cbf, go to ip4.me in a web browser and it will tell you.
4. With your external phone, with the wifi off, set your viewer up so that it looks for your router's external IP address and port 8080.
NOTE:
This is not a particularly sophisticated way of setting this up. Please consider the possibility that a technologically competent thief could use this as a way of casing your joint so they can rob you while you're out. Please at least a) ensure you have a strong password on your camera; and b) consider using a non-standard port rather than 8080 as your external port.
The more sophisticated way of doing this involves being able to ssh into your home network using e.g. PuTTY, and using this connection to do tunneling. I run an SSH server on my nexus sometimes (though I don't use it for this purpose), so it is definitely possible for this to be your phone. You can then remote into your home network and then use the camera client as if you were connected via wifi at home. Sing out if you'd like a hand setting up SSH, as it's actually not as hard as it sounds.

m.is.for.michael said:
Essentially, what you need to do is:
1. Set your home phone up with a static IP address. You can normally do this by connecting your phone to wifi, and then going to the control interface for your router and fixing the IP address to that device (look under DHCP settings).
2. Forward an external port (e.g. 8080) of your static home IP address to the http port (80) on the IP address you just assigned permanently to your home phone. This will be under port forwarding in your router interface. The internal port is the one the home phone tells you when you start the webcam program.
3. Contact your ISP and ensure that a) you have a static IP (if not, you can register a dynamic one at e.g. dyn.com, and get software which will update it periodically); and b) that port 8080 is not blocked at their end. You can check your home external IP address on your router page, or if you cbf, go to ip4.me in a web browser and it will tell you.
4. With your external phone, with the wifi off, set your viewer up so that it looks for your router's external IP address and port 8080.
NOTE:
This is not a particularly sophisticated way of setting this up. Please consider the possibility that a technologically competent thief could use this as a way of casing your joint so they can rob you while you're out. Please at least a) ensure you have a strong password on your camera; and b) consider using a non-standard port rather than 8080 as your external port.
The more sophisticated way of doing this involves being able to ssh into your home network using e.g. PuTTY, and using this connection to do tunneling. I run an SSH server on my nexus sometimes (though I don't use it for this purpose), so it is definitely possible for this to be your phone. You can then remote into your home network and then use the camera client as if you were connected via wifi at home. Sing out if you'd like a hand setting up SSH, as it's actually not as hard as it sounds.
Click to expand...
Click to collapse
To the OP, This is what you have to do. Everything is set up correctly on the phone is what it seems like but without a static IP from your internet service provider you're going to run into issues again the minute it changes it's IP address.
You'll have to connect to your router from the outside world (The internet) via the address that shows up in your router page under status. from there you connect to the port you specified with port forwarding and it'll connect to your phone from anywhere you're located outside of your home wifi.

m.is.for.michael said:
Essentially, what you need to do is:
1. Set your home phone up with a static IP address. You can normally do this by connecting your phone to wifi, and then going to the control interface for your router and fixing the IP address to that device (look under DHCP settings).
2. Forward an external port (e.g. 8080) of your static home IP address to the http port (80) on the IP address you just assigned permanently to your home phone. This will be under port forwarding in your router interface. The internal port is the one the home phone tells you when you start the webcam program.
3. Contact your ISP and ensure that a) you have a static IP (if not, you can register a dynamic one at e.g. dyn.com, and get software which will update it periodically); and b) that port 8080 is not blocked at their end. You can check your home external IP address on your router page, or if you cbf, go to ip4.me in a web browser and it will tell you.
4. With your external phone, with the wifi off, set your viewer up so that it looks for your router's external IP address and port 8080.
NOTE:
This is not a particularly sophisticated way of setting this up. Please consider the possibility that a technologically competent thief could use this as a way of casing your joint so they can rob you while you're out. Please at least a) ensure you have a strong password on your camera; and b) consider using a non-standard port rather than 8080 as your external port.
The more sophisticated way of doing this involves being able to ssh into your home network using e.g. PuTTY, and using this connection to do tunneling. I run an SSH server on my nexus sometimes (though I don't use it for this purpose), so it is definitely possible for this to be your phone. You can then remote into your home network and then use the camera client as if you were connected via wifi at home. Sing out if you'd like a hand setting up SSH, as it's actually not as hard as it sounds.
Click to expand...
Click to collapse
Yes! That was extremely helpful and thanks for describing it in detail.
It took me about 20 minutes but now it is working perfectly and I am able to stream live video from wherever I wish. (It is working better than I thought on 4g also)
I had to create a static id for my home mobile phone and that was under DHCP settings like you said. That allowed me to properly open up the ports
Thanks for the help everyone and I'm glad I didn't give up because this is pretty sweet, and also I do understand the risks.
On a side note, what kind of strain would this put on my extra nexus if I was running IP webcam 24/7? (while plugged in of course) Guess I will find out

Deleted
Sent from my GT-I9000

mobile
m.is.for.michael said:
Essentially, what you need to do is:
1. Set your home phone up with a static IP address. You can normally do this by connecting your phone to wifi, and then going to the control interface for your router and fixing the IP address to that device (look under DHCP settings).
2. Forward an external port (e.g. 8080) of your static home IP address to the http port (80) on the IP address you just assigned permanently to your home phone. This will be under port forwarding in your router interface. The internal port is the one the home phone tells you when you start the webcam program.
3. Contact your ISP and ensure that a) you have a static IP (if not, you can register a dynamic one at e.g. dyn.com, and get software which will update it periodically); and b) that port 8080 is not blocked at their end. You can check your home external IP address on your router page, or if you cbf, go to ip4.me in a web browser and it will tell you.
4. With your external phone, with the wifi off, set your viewer up so that it looks for your router's external IP address and port 8080.
NOTE:
This is not a particularly sophisticated way of setting this up. Please consider the possibility that a technologically competent thief could use this as a way of casing your joint so they can rob you while you're out. Please at least a) ensure you have a strong password on your camera; and b) consider using a non-standard port rather than 8080 as your external port.
The more sophisticated way of doing this involves being able to ssh into your home network using e.g. PuTTY, and using this connection to do tunneling. I run an SSH server on my nexus sometimes (though I don't use it for this purpose), so it is definitely possible for this to be your phone. You can then remote into your home network and then use the camera client as if you were connected via wifi at home. Sing out if you'd like a hand setting up SSH, as it's actually not as hard as it sounds.
Click to expand...
Click to collapse
Hi..
is it possible to do this with two mobile phones and without a static ip using mobile network only? somehow sending video signal to some free host using mobile internet?
like one phone stays at home connected to mobile internet as ip camera.. and with second I can watch the video from anywhere???
because when i create a local network with one and connect to it with other then all this works great...

OLD post i know but i figured id post in here just in case you guys are still around.
I have a S4 ( i don't think this matters)
But just like the OP. I have these 2 apps . The stream works fine in house (both on my wifi) but i cannot figure out how to get it connected off of wifi. the monitoring phone i am trying to use i turned the wifi off to use the 4glte but it just wont connect. I do have ports 8080 and 80 forwarded.
But what IP and port do i use the the connecting phones settings? the 192..... one is internal and works in the wifi but i tried that one and the external ip.... any ideas?
(the external IP i am using is the one from googling "whats my ip" inside the cams phone web browser so its the ip from the phone not pc)