Hello,
I'm having some troubles while trying to root my friend's phone.
I tried using UnRevoked. I used the same method for my own phone and it worked without any issues, so the drivers etc should be installed properly.
During the rooting procedure Unrevoked will reboot the device, but the device got stuck on the HTC loading screen. And just stayed there, nothing happend. Unrevoked screen displayed: "Waiting for device to reboot"
I pulled the battery and rebooted with usb cable still plugged in. But device wouldnt reboot, it got stuck on HTC loading screen again...
I finally pulled the battery again, tried reboot without usb cable, this worked, when I advanced to the second HTC loading screen (the one with 'quietly brillant' subtitle), at which point I quickly plugged the usb cable back in, so maybe Unrevoked would pick up where it was. But I now got the error: "coudln't find misc"
So long story short: Rooting failed, thankfully I can still boot and everything is still there. Rebooting phone with usb plugged in doesn't work. I also sometimes get the "7 vibrates" when trying to boot (not sure what that means, googling this error didn't help me alot though...)
Phone is running android 2.2 btw, is there an (easy) solution to rooting without having to reboot the phone while connected to usb?
Sorry for the lengthy read and thanks in advance everyone!
Grtz!
Are you using ClockworkMod or AmonRA as the recovery image?
Maybe try the one you haven't tried yet?
R.
hi & thanks,
I just tried the default one, so that would be Clockwork recovery.
Which version of amon ra do you suggest?
Although I don't think that would solve the issue, since it just seems that the phone doesnt want to boot up whenever it is connected to USB...
Grtz
I haven't had any problems with RA version 2.0.1, and I think it's the image that Robocik recommended with his RCMixHD ROM.
Just noticed the link in his thread no longer works but it seems to be available on a German forum (Google 'RA recovery 2.0.1' and follow the link to the androidhilfe.de forum - sorry but I'm not permitted to post the link).
There are ways to flash it through fastboot, but it not something I've needed to do.
Good luck!
I just discovered another symptom:
The phone also keeps asking to set the time zone quite often!
Is this normal? The is usually still correct, but it still asks me to set, which I find odd.
I'm pulling the battery on this phone alot, but still I thought there was some kind of internal battery to store this kind of information? Could it be a symptom that there's something wrong with the phone?
The first symptom was never booting when connected to USB.
2nd: Sometimes getting stuck at same bootscreen, even when not connected to USB.
Also shutting down is sometimes difficult, getting stuck at HTC bootscreen again.
3rd: Often asks to set the time.
Edit: It booted succesfully while connected to USB this time... I hate it when there always seems to be an exeption to a problem right after you post it online
Edit2: The time setting problem might be because there's no simcard in the phone?
You need a fully working sd and sim card to root your phone with unrevoked.
For the problem with the time: menu>settings>date & time>uncheck "automatic (use network provided values)".
Thanks, I'll try this that later this evening!
can i ask... if you plug in your phone to your PC, do you get the option to mount as disk drive (want to make sure you dont have a USB brick)
sorry for posting this here, but im kinda new to this...
i wanted to root my htc desire, but ive encountered some problems. i installed Linux on my laptop and then installed Unrevoked3.
Heres the catch, it recognises my phone and everything, but then it says that something couldny be installed... it says <internal error installing package failed>. i dont really now what to do. i would REALLY apreciate all the help i can get. i just wanted to root my phone and i read a lot of stuff about it, but i dont get the bigger picture. when something goes wrong i dont know what to.
so PLEASE HELP...
Rageypeep said:
can i ask... if you plug in your phone to your PC, do you get the option to mount as disk drive (want to make sure you dont have a USB brick)
Click to expand...
Click to collapse
hi,
I can still use the phone as a USB drive (luckily)
thanks
mguli1 said:
sorry for posting this here, but im kinda new to this...
i wanted to root my htc desire, but ive encountered some problems. i installed Linux on my laptop and then installed Unrevoked3.
Heres the catch, it recognises my phone and everything, but then it says that something couldny be installed... it says <internal error installing package failed>. i dont really now what to do. i would REALLY apreciate all the help i can get. i just wanted to root my phone and i read a lot of stuff about it, but i dont get the bigger picture. when something goes wrong i dont know what to.
so PLEASE HELP...
Click to expand...
Click to collapse
- got the modified usb drivers?
- usb debugging enabled?
btw: u didnt need to install linux just to root your phone, windows will do just fine
(normally...)
mguli1 said:
sorry for posting this here, but im kinda new to this...
i wanted to root my htc desire, but ive encountered some problems. i installed Linux on my laptop and then installed Unrevoked3.
Heres the catch, it recognises my phone and everything, but then it says that something couldny be installed... it says <internal error installing package failed>. i dont really now what to do. i would REALLY apreciate all the help i can get. i just wanted to root my phone and i read a lot of stuff about it, but i dont get the bigger picture. when something goes wrong i dont know what to.
so PLEASE HELP...
Click to expand...
Click to collapse
Here you find solutions which maybe also work for you:
http://forum.xda-developers.com/showthread.php?t=902307
@swimon:
When using linux you do not need to install the modified usb drivers. You only need to this in windows.
Thanks for all the help everyone.
I tried running the unrevoked root procedure again, this time with a working SIM card inserted.
Everything works fine, phone reboots when it should reboot and everything. But it still doesn't work. I get the error "Internal Error: Couldn't find misc" while the phone keeps rebooting over and over...
I noticed though, that I got a lot of notifications by windows "usb device not recognized" "usb device not working properly" etc during the procedure, I cant remember if this happened the when I rooted my first phone... Or could this be a sign that there's something wrong with the drivers?
What now?!
@mattdroid: oh okay, didn't know that.
Okay check list:
Installed modified hboot drivers?
Uninstalled htc sync (and not the drivers)?
Usb debugging enabled (settings>applications>development)?
Set phone's connection type to "only charge" (if you have problems try "storage") and "never ask again" (settings>connect with pc)?
Which pvt version does your friend's desire have (boot into hboot bootloader, first line)?
MatDrOiD said:
Okay check list:
Installed modified hboot drivers?
Uninstalled htc sync (and not the drivers)?
Usb debugging enabled (settings>applications>development)?
Set phone's connection type to "only charge" (if you have problems try "storage") and "never ask again" (settings>connect with pc)?
Which pvt version does your friend's desire have (boot into hboot bootloader, first line)?
Click to expand...
Click to collapse
1. I think I have the right ones, but maybe something was changed to them, how can I know if I still have the right ones?
2. Never had HTC sync installed...
(i'll just uninstall all my android drivers and reinstall them to make sure steps 1 and 2 can be considered as checked)
3. Check
4. Check
Your other question:
PVT1 SHIP S-ON
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Aug 10 2010, 17:52:18
Thanks for helping
swimon said:
1. I think I have the right ones, but maybe something was changed to them, how can I know if I still have the right ones?
2. Never had HTC sync installed...
(i'll just uninstall all my android drivers and reinstall them to make sure steps 1 and 2 can be considered as checked)
3. Check
4. Check
Your other question:
PVT1 SHIP S-ON
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Aug 10 2010, 17:52:18
Thanks for helping
Click to expand...
Click to collapse
When connect your phone to your computer (in usb debug mode and on only charge), in the device manager of windows you should be able to find a device like "android phone 1.0". If this is so, the drivers are installed correctly.
Just to be sure, do this procedure again:
1.) Install htc sync (you need this program to install drivers correctly)
2.) Install hboot drivers: http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
3.)
a) Disconnect phone from pc
b) Make sure you have the following settings in your phone:
Checked "unknown sources" in settings>applications?
Usb debugging enabled (settings>applications>development)?
Set phone's connection type to "only charge" (if you have problems try "storage") and "never ask again" (settings>connect with pc)?
4.) Reboot phone
5.) Uninstall only htc sync and not the drivers (htc sync driver installer)
6.) Reboot computer (important)
7.) Now start unrevoked (reflash_package.exe) with administrator rights in windows
8.) Connect phone with computer
9.) WAIT ... WAIT .... WAIT until unrevoked says "done"
Thanks for the nice little tutorial!
will try and post results tomorrow!
I have been running unrevoked normally (without administrator rights) this whole time, maybe that has been causing the problem.
Grtz!
swimon said:
Thanks for the nice little tutorial!
will try and post results tomorrow!
I have been running unrevoked normally (without administrator rights) this whole time, maybe that has been causing the problem.
Grtz!
Click to expand...
Click to collapse
Well.. this happend to me.. what i have done was.. i just downloaded older version of unrevoked and it work like a charm..may be you can give it a shot
But I think older versions of unrevoked don't support android 2.2 ?
Going to try MatDroid method now
FFS!
I tried everything from scratch. Like MatDroid described.
Seems like this phone just doesn't want to reboot when it's on USB!!
How long are your supposed to wait when unrevoked displays "waiting for reboot" and the phone is on HTC boot screen?
And what could cause this phone to have so much difficulties powering on and off?
Grtz
edit: first thing unrevoked does is pushing the recovery, later it get's stuck on bootscreen, but doesn't this mean the recovery is already on my phone and I can maybe install it manually?
Grtz
swimon said:
FFS!
I tried everything from scratch. Like MatDroid described.
Seems like this phone just doesn't want to reboot when it's on USB!!
How long are your supposed to wait when unrevoked displays "waiting for reboot" and the phone is on HTC boot screen?
And what could cause this phone to have so much difficulties powering on and off?
Grtz
edit: first thing unrevoked does is pushing the recovery, later it get's stuck on bootscreen, but doesn't this mean the recovery is already on my phone and I can maybe install it manually?
Grtz
Click to expand...
Click to collapse
Sometimes unrevoked cannot do the "final reboot". After 20 minutes without changes, pull the battery and wait 10 minutes. Now put battery in and start phone. If you have the superuser app in your applications, everything is fine. After this, check wether unrevoked flash recovery.
[solved using the following RUU: http://goo-inside.me/bravoc/ruu/RUU...Radio_2.15.00.11.16_release_168495_signed.exe + the factory Google SDK driver. I solemnly ask of any CDMA Desire user to please download and save in a safe place this RUU]
Guys,
I completely formatted my CDMA Desire (don't ask) and now I'm on the
BRAVOC DTV2 SHIP S-OFF
HBOOT-1.06.0000
MICROP-051e
TOUCH PANEL-SYNT0101
RADIO-2.15.00.11.16
Dec 22 2010, 16:16:39
FASTBOOT USB
...screen. Formatted everything there was to format in Clockworkmod recovery options: sdcard, boot, sd-ext, system, etc.
None of the 3 RUU's for the CDMA Desire work. All give me the Error 130 - Model ID incorrect, use a correct RUU error (I've previously succesfully used RUU's, but I have gotten this before.)
I used to have Oxygen's Gingerbread ROM in there.
ADB devices shows nothing. I have Windows XP. In Control Panel, I got Android USB Devices - My HTC on there, says working properly.
Tried to push recovery using fastboot commands, says Failed every time.
Changed USB ports, I guess I'll keep changing, as that's been the trick from time to time...
Any ideas? Been at least two hours searching and trying, would love some input...
Hello hoping someone can help, I'm a noob have not had much success in rooting yet...
Have a wildfire (Australian Telstra 3G)
Trying to downgrade firmware from HBOOT 1.01.0002 to 1.010001 so i can get s-off.
I'm following the instructions posted in http://forum.xda-developers.com/showthread.php?t=1132028
I've downloaded htc drivers (and uninstalled htc sync)as per instructions
Also loaded android drivers via device manager (screen dump attatched)
I can "talk" to my SD card OK with windows explorer but i don't think I am "talking to my phone or card via adb and the command prompt"
Got the full SDK package installed.
All the obvious things.. Andrtoid debugging enabled / Charge only
So When I attempt to run Step 1 bat I get the following error message:adb server is out of date..killing..*daemon server started successfully... error device not found..(screen dump attatched)
also i tried to make a "goldcard" and extract the serial no of the sd card on the phone. . same deal.. as soon as i get into adb ....error. device not found
note i am using windows 7.
my theory is that i'm don't have a propper usb link when i go into the dos cammand prompt/adb but i have loaded the drivers. I think this is happening when i try to root other phones also (eg zte blade)
can anyone help me. be kind to me I'm a noob...I've attatched three relevant screen dumps
wattamega said:
Hello hoping someone can help, I'm a noob have not had much success in rooting yet...
Have a wildfire (Australian Telstra 3G)
Trying to downgrade firmware from HBOOT 1.01.0002 to 1.010001 so i can get s-off.
I'm following the instructions posted in http://forum.xda-developers.com/showthread.php?t=1132028
I've downloaded htc drivers (and uninstalled htc sync)as per instructions
Also loaded android drivers via device manager (screen dump attatched)
I can "talk" to my SD card OK with windows explorer but i don't think I am "talking to my phone or card via adb and the command prompt"
Got the full SDK package installed.
All the obvious things.. Andrtoid debugging enabled / Charge only
So When I attempt to run Step 1 bat I get the following error message:adb server is out of date..killing..*daemon server started successfully... error device not found..(screen dump attatched)
also i tried to make a "goldcard" and extract the serial no of the sd card on the phone. . same deal.. as soon as i get into adb ....error. device not found
note i am using windows 7.
my theory is that i'm don't have a propper usb link when i go into the dos cammand prompt/adb but i have loaded the drivers. I think this is happening when i try to root other phones also (eg zte blade)
can anyone help me. be kind to me I'm a noob...I've attatched three relevant screen dumps
Click to expand...
Click to collapse
you might want to have a look at this alternative thread: http://forum.xda-developers.com/showthread.php?p=19746165
Swyped from my HTC Wildfire (Buzz)
no usb comms when in command prompt / adb
eventcom said:
you might want to have a look at this alternative thread: http://forum.xda-developers.com/showthread.php?p=19746165
Swyped from my HTC Wildfire (Buzz)
Click to expand...
Click to collapse
--------------------
Thanks eventcom, but I've followed that link and numrerous others and they all follow the same theme.
here is the problem as I see it...
1/I have installed the android driver when in hboot and it works ok as per attatched image
2/ I have installed htc_sync_setup 3.2.20.exe which is the latest driver availiable from the htc website.I then uninstall HTC sync, which leaves HTC driver installer & HTC BMP USB driver remaining as installed ( as per instructions)
3/ I have uninstalled any other USB programs which might conflict including Itunes and ascociated garbage (no i didn't put it there my kids did!).
USB debugging is turned on & when i plug in USB i go charge only (as per instructions)
Here's a hint...
When I execute an adb commandwithin command prompt eg [adb devices] i get no devices. When I issue a adb copy command I get the result "device not found" I'm know i'm going nowhere on this until I can get device to properly talk via adb and this is the assistance that i am seeking
further info.
I've tried this procedure on another (winxp) machine with same results.
Ive tried this procedure on another wildfire "s" (that is already rooted) same results
I've temporarily disabled the AVG 2012 virus protection & firewall.
As well as being in the directory that the file adb.exe exists I have also installed SDK so adb appears to run in any directory (please explain ?)
If i plug in usb and go "mount sd card" I can access the sd card on the phone viawindows explorer . in my mind this tells me that I have correct usb driver working.
I've tried a different usb cable AND a different phone
before I uninstalled htc sync i tried it out. it doesn't work and the phone won't sync up to this program ( it rarely works this program, tried it on numerous pc with different htc devices and more often than not it doesn't work)
I'm hoping that someone who is experienced in adb can help me get the phone talking with my pc, keeping in mind that I've done almost everything that I can think of to get my phone to "talk: via usb cable and issue commands. If I can't get my phone to communicate via adb then there is no way I can get past step one
please help me
wattamega said:
--------------------
please help me
Click to expand...
Click to collapse
i shall do my very best
ok so what system are you currently running? (win7,vista,xp ect)
are you using the stock usb cable that came with the phone?
when you connect the device to the pc with usb debugging turned on do you get the usb debugging notification in your status bar on the phone?
when you plug your device into the pc with debugging enabled what does your device manager recognize it as? mine shows up as attached...
did your antivirus flag up when you were installing the skd or downloading the adb.exe?
Success with debranding but problems with Revolutionary recovery
Thank you heavy_metal_man.
I finally solved the USB driver issue. I ended up completely uninstalling HTC driver installer & HTC BMP USB driver. I then installed HTCDriver3.00.007.exe as a stand alone only. Finally I got it to recognise in device manager.
Important lesson learned. Installing the latest HTC driver off the website which is htc_sync_setup_3.2.20 (which installs 3 modules HTC Sync, HTC driver installer & HTC BMP USB driver) then uninstalling HTC sync did not work for me...I now just have HTC driver installer only.
I asked to install clockwork mod during the revolutionary process, but I suspect it didn't work
Anyway I have now succesfully debranded and "sort of" have root. my Hboot screen now looks like this...
-Revolutionary-
BUZZ PVT SHIP S-OFF
HBOOT-6.01.1002
MICROP -0622
TOUCH PANEL - ATMEL224_16ab
RADIO-3.35.20.10
Nov 17 2010 12:08:53
Problem is when I go into recovery I get the "revolutionary CWM V4.0.1.4" Menu... So far so good.however When I select any item EG bacup & restore, intead of going to the next level menu it just goes to a revolutionary screen with no menu and just hangs. pressing the power button takes me back a level but the vol+ vol- buttons do nothing as there is no menu to select from.
So i can't flash with this current screen. the only way I can get out of it is to remove the battery as the reboot & power off menu items do not work.
.
I have tried re-running the revolutionary Exe file again. It prompts me if i would liketo install CWM and I say yes . It says it's done and takes me into Fastboot USB where I can reboot. but CWM ( The wierd revolutionary model) DOES not work like the CWM that i am accustomed to...
So i STILL can't flash CM7...but I'm getting closer...
wattamega said:
Thank you heavy_metal_man.
I finally solved the USB driver issue. I ended up completely uninstalling HTC driver installer & HTC BMP USB driver. I then installed HTCDriver3.00.007.exe as a stand alone only. Finally I got it to recognise in device manager.
Important lesson learned. Installing the latest HTC driver off the website which is htc_sync_setup_3.2.20 (which installs 3 modules HTC Sync, HTC driver installer & HTC BMP USB driver) then uninstalling HTC sync did not work for me...I now just have HTC driver installer only.
I asked to install clockwork mod during the revolutionary process, but I suspect it didn't work
Anyway I have now succesfully debranded and "sort of" have root. my Hboot screen now looks like this...
-Revolutionary-
BUZZ PVT SHIP S-OFF
HBOOT-6.01.1002
MICROP -0622
TOUCH PANEL - ATMEL224_16ab
RADIO-3.35.20.10
Nov 17 2010 12:08:53
Problem is when I go into recovery I get the "revolutionary CWM V4.0.1.4" Menu... So far so good.however When I select any item EG bacup & restore, intead of going to the next level menu it just goes to a revolutionary screen with no menu and just hangs. pressing the power button takes me back a level but the vol+ vol- buttons do nothing as there is no menu to select from.
So i can't flash with this current screen. the only way I can get out of it is to remove the battery as the reboot & power off menu items do not work.
.
I have tried re-running the revolutionary Exe file again. It prompts me if i would liketo install CWM and I say yes . It says it's done and takes me into Fastboot USB where I can reboot. but CWM ( The wierd revolutionary model) DOES not work like the CWM that i am accustomed to...
So i STILL can't flash CM7...but I'm getting closer...
Click to expand...
Click to collapse
That's ok , power is meant to do that, its the back button you need to use the trackball to select stuff also if I remember correctly that recovery has an issue where it will not charge the phone when it is turned off, so I would update that asap I shall give you a link when I'm out of bed, but for the mean time, backup, wipe everything and install cm7+ gapps
ok here is the most up tp date cwm recovery for the buzz as far as i know. and here is the thread it came from something to note, when you jump up tp gingerbread the type of recovery changes as well, so, the new one will not flash sense roms unless the rom has been designed for the new edify type recovery. not sure how many support this though. also the new recovery will NOT flash radios. it does not play well with others but you can always downgrade your recovery temporarily if you need to, or use the rom manager app (which ic an app interface for the recovery) to flash what you need
Sent from my HTC Sensation using xda premium
Success at last
Thanks Heavy_metal_man
Success I now have CM 7.2.0- buzz. I also installed google apps ok.
I guess I shouldv'e read the instructions on flashing a bit closer. I've also got a wildfire "s" as well and it uses the power button to enter so I suppose I just assumed...Truth is that I've only just got this phone last week and I didn't even realise that it had a trackball button ...
This is my first ever root/flash that I have done and I have learned alot from the experience. I specifically got this phone ($10 on ebay) so I coul;d learn to do this without the risk of damaging my own phone. This phone had "issues" when I bought it which is why i got it so cheap. now I have upgraded to CM7 it the issues (eg wireless hotspot would not remain on) have gone.
Soon I hope to have the experience and courage to flash my own phone and my kids phones.
Thanks to H_M_M and all of the XDA forum for helping me out.
wattamega said:
Thanks Heavy_metal_man
Success I now have CM 7.2.0- buzz. I also installed google apps ok.
I guess I shouldv'e read the instructions on flashing a bit closer. I've also got a wildfire "s" as well and it uses the power button to enter so I suppose I just assumed...Truth is that I've only just got this phone last week and I didn't even realise that it had a trackball button ...
This is my first ever root/flash that I have done and I have learned alot from the experience. I specifically got this phone ($10 on ebay) so I coul;d learn to do this without the risk of damaging my own phone. This phone had "issues" when I bought it which is why i got it so cheap. now I have upgraded to CM7 it the issues (eg wireless hotspot would not remain on) have gone.
Soon I hope to have the experience and courage to flash my own phone and my kids phones.
Thanks to H_M_M and all of the XDA forum for helping me out.
Click to expand...
Click to collapse
no problem man glad your all kitted out!
wow that cheap this phone cost me £140 when i bought it!!! ( a few years ago) man i got ripped off.... still glad to hear you got sorted out you should always read everything you can carefully before you go flashing your phones
also, just so you know, this wildfire is code named BUZZ and your wildfire s is code named MARVEL just to avoid confusion of course if you need any help with the marvel just let me know. i imagine you've been over to the marvel forum ect but if you get lost pm me. i have experience with that phone as well aside from the name they are completely different, and the marvel does not have s-off yet :/ not by software anyway so everything is different to do :/ still i am rambling now glad your sorted mate :good:
Hi, I'm stuck in a quandary with my HTC desire
I believe i have the USB BRICK issue, i cannot get the phone recognised in any PC, have used official HTC cable and other and another PC, all work with my other android phone but not this one. I cannot get into ADB or FASTBOOT via cable not even if i boot into the bootloader. I get nothing
I can't use fastboot commands or ADB via windows CMD prompt but i can adb via wireless, sadly that does not help with tools like 'revolutionary' or 'fastboot' commands.
I successfully managed to create a goldcard and flash a stock WWE RUU, which went well, and the phone went back to stock but i only get 'USB DEBUGGING' symbol pop up on the phone side when i plug the cable in, nothing in device manager, no option to install any drivers, i checked it wasn't set to charge only in 'settings' and usb dubugging is checked.
Phone will charge on the official HTC cable.
I still a noob so if i have missed something or have quoted any of the above incorrect then i hope you understand.
I think I'm missing something so simple.
Could i kindly ask if anyone could talk me through any terminal emulator methods i could use from within the phone to help solve this problem.
I do not get any change in device manager when the phone is plugged in and have tried front and back ports, there is no yellow triangle etc in device manager indicating a driver issue and i also did a fresh install of windows 7 and new htc install. (Win XP gave the same results)
I even checked the usb port on the pcb and it is in good condition, nothing jammed in there, no broken / damaged pins and the solder points are all good.
Many thanks
Chris
Bravo PVT4 SHIP S-ON
HBOOT-0.93.001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.09.05.30_2
Aug 10 2010,17:52:18
Hi,
So on one casual Sunday afternoon after getting burgers with my friend, I went to use my phone to find that the screen was on the fritz:
(had images uploaded onto IMGUR but I can't like to them because it's a new account )
After taking the battery out and restarting it, it went into the htc load screen and then glitched out again.
(had images uploaded onto IMGUR but I can't like to them because it's a new account )
I'm able to get into the HBOOT menu fine and it says the following:
VISION PUT SHIP S-ON
HBOOT - 0.85.0013
MICROP-0425
RADIO-26.10.04.03_M
eMMC-boot
Apr 11 2011,23:36:27
I have tried downloading and loading 4 different PC10IMG.zip(s), none of which have worked for reasons such as:
CID INCORRECT! UPDATE FAILED!
One of the PC10IMG.zip that I used seemed to load fine(?), no error message was shown but it went back to HBOOT after checking the zip and there's no change to the state of the phone.
I installed ADB on my computer and the adb drivers for my phone installed fine but adb devices doesn't detect my phone. I'm unable to get into the usb debugging menu to turn debugging on which I'm guessing doesn't help.
I also installed fastboot which detects the phone fine.
Any suggestions?! Really stuck, pretty sure the phone's not under warranty any more (I've had it for over 2 years and took it apart once to try fix a broken headphone jack, to no success might I add).