Related
Okay so my friend bricked his galaxy nexus (Gave it to me because he said its bricked) of course i accepted it lol. But i tried to fix it i did everything i could from reading forums i swear i have worked forever looking for a fix. It is completely unresponsive no download mode. no ADB connection because when it plugs into a computer it shows up as OMAP 4440 or something like that. i have tried all kinds of different drivers and i have tried on multiple computers (Xp, Windows7, even a mac) he said he was flashing the sdcard or something and unplugged it by accident. So i could understand that being a issue since the phone only has a internal sd card. Anyone know how to get it back? i havent seen a Jtag yet for it and i have a Jig for my Galaxy Sii Skyrocket but it doesnt work on the nexus (FYI to anyone out there the jig works on my dads samsung windows phone) HELP!
You tried different drivers? You should just use the most current ones for the phone. Did you try the new toolkit mskip posted? Did you isntall the SDK?
paperhurts said:
You tried different drivers? You should just use the most current ones for the phone. Did you try the new toolkit mskip posted? Did you isntall the SDK?
Click to expand...
Click to collapse
Thanks for the response i didnt use mskips i dont think. i have tried the galaxy nexus toolkit 6.0 or whatever but i have tried all kinds of drivers including the google official galaxy nexus i515 or something like that. it shows up as omap 4440 in app manager and disconnects and connects constantly then says device didnt install properly. what do you mean by the sdk? i cant find any way to access my phone. i think i tried something with sdk but im not sure
Yes i read up i did do that GNex Toolkit v6.0 and it wouldnt find my phone (Because of the omap 4440 disconnect and reconnect thing i believe.
First off, on't use a toolkit.
Second, when you plug it in, go to device manager, right click the "OMAP 4460" and click install driver. Either install PDANet or find the driver online and your phone should be able to be used in fastboot.
Finally, if your (Or your friends) phone was "Fully Bricked" it wouldn't be recognized by the computer, it wouldn't turn on, it would literally not be able to do anything except sit there, the fact that the computer sees it means that it is "Soft Bricked" which is much less serious.
miketoasty said:
First off, on't use a toolkit.
Second, when you plug it in, go to device manager, right click the "OMAP 4460" and click install driver. Either install PDANet or find the driver online and your phone should be able to be used in fastboot.
Finally, if your (Or your friends) phone was "Fully Bricked" it wouldn't be recognized by the computer, it wouldn't turn on, it would literally not be able to do anything except sit there, the fact that the computer sees it means that it is "Soft Bricked" which is much less serious.
Click to expand...
Click to collapse
i appreciate it but when i install the driver which one should i select? it is the Verizon LTE one and i have tried manually choosing the driver but there is so many. What one should i choose?
When i try to install pdanet it always uninstalls at the end automaticaly? why is that?
IRusselldABear said:
When i try to install pdanet it always uninstalls at the end automaticaly? why is that?
Click to expand...
Click to collapse
I couldn't get PDAnet to work for me either. It asks you to enter Debugging mode and I can't get into android
I cant get into android neither thats the problem... it is unresponsive except for the fact that it says omap 4440 over and over. im gonna play with it more when i get home but im currently in school. LOL
is it possible to volume+power into recovery mode?
Jsweetser2 said:
is it possible to volume+power into recovery mode?
Click to expand...
Click to collapse
I can get mine into CWM, but whenever I'm flashing a ROM, it reboots itself.
Install PDANet and when it asks for your phone, go into Task Manager and force close the process. This will keep the driver/program installed without needing your phone and it should then be seen in recovery.
Not working still :/
Thanks for highjacking my post twinky lol. i have seen the answer to yours around... google a little more.
TwinkyOfHope said:
I can get mine into CWM, but whenever I'm flashing a ROM, it reboots itself.
Click to expand...
Click to collapse
Jsweetser2 said:
is it possible to volume+power into recovery mode?
Click to expand...
Click to collapse
Please Help!
My phone goes into boot loader and download mode however every time I flash Stock it finishes successfully and goes to the same google screen its always stuck on. I'm kinda a n00b so if anyone could help me with this (try to have a lot of detail) I would be grateful. Thanks
It sounds like what I did to my Galaxy Note before I bought my Nexus. When unrooting I overwrote my bootloader with a missed character through ADB. I tried everything, naked drivers, ODIN, all it would come up with was OMAP on the PC. I ended up having to return it to AT&T. Ask him if he was trying to root it the old way through ADB.
samiaziz said:
My phone goes into boot loader and download mode however every time I flash Stock it finishes successfully and goes to the same google screen its always stuck on. I'm kinda a n00b so if anyone could help me with this (try to have a lot of detail) I would be grateful. Thanks
Click to expand...
Click to collapse
samiaziz, make sure you're wiping everything before flashing a stock rom. It wouldn't hurt to wipe system, cache and dalvik and then restart recovery (in advanced menu) and wipe again before flashing the stock rom.
Ok, as long as it shows up, it's still working
OMAP440 is the processor, which means, that is is working, but the bootloader is corrupt, or missing. I'd say it's corrupt (Flash-error)
The best way I've found, check this website: http://www.mobiletechvideos.com and see if they have a JTAG solution... (My JTAG device will arrive in a few weeks )
Even if they don't, send it in, and they'll figure out a way to do that I think they do some special offer, if you send it in for testing purposes...
But, other than that, there's no way I can help you. The firmware is completely fu**ed...
Tried That
I have already tried getting into recovery but that dosnt work. it takes me to the google splash screen
2 words: fastboot, linux.
sent from my i9250
Instead of JTAG-ing it, you could always try this. The maker of the Riffbox JTAG has come out with a solution for unbricking by reflashing the OMAP processor.. Aptly named OMAPFlash.
I've used it with success several times, but also had it fail on me. It can't hurt though, if your phone is already bricked.
If it's coming up with OMAP4460 (even briefly) when the phone is plugged into your computer without a battery, you are able to run the program. You just need to install the drivers for it.
See http://forum.gsmhosting.com/vbb/f634/unbrick-dead-samsung-gt-i9250-galaxy-nexus-32gb-prime-via-usb-cable-freeeeeeeeeeee-1465412/ for download.
Lemme know if you need instructions.
So I somehow during my flashing adventures got to the point where my sgs3 would no longer recieve 4g/3g signal but only 2g. I reverted to stock rom, still had the issue (4.0.4), and it wouldn't let me upgrade to jelly bean, it told me "unable to connect to network" when I tried system update. So i took to the fixing my imei number, which apparently did something as I was then able to connect to the server and upgrade to jelly bean, with one problem; I was still getting 2g. I continued to try to use the rest of the guide (http://forum.xda-developers.com/showthread.php?t=1801997) but on jelly bean my computer would no longer recognize my phone through odin or qpst, etc, but I could view the files. I could do nothing to get it to bring up a port I could connect to. I downloaded/installed/uninstalled/installed the driver many times and still couldn't get it to connect. Like an idiot I tried through odin to flash back down to 4.0.4 so I could reestablish connection and continue fixing my 2g signal, but it quit halfway through and said "Can't open the serial(com) port" and didn't flash, so whenever I tried to turn on my phone i got the firmware upgrade error and telling me to connect to kies and use recovery mode, which I did. However, Kies wouldn't recognize my phone through it. It's drivers never connected, and it just sits there saying connecting. Samsung's help/support over the phone was literally WORTHLESS ("indian accent" Take da battery out ov your phone, sir. Wait 10 seconds. Put it back in..... They literally told me at one point "Go into menu, settings..." me-" In my phone?" him "Yes that is correct" me "Thats my problem dude, I CANT TURN IT ON") and I currently have a ups label to ship it in to get repaired, but I want to know if there is anything I can do before sending it in and waiting 5-7 days without a cell phone. Thanks in advance to help
Odin the stock4.1.1 software pre rooted or not.. My phone froze at samsung screen but just reboot and it will be fine
Sent from my SGH-T999 using xda premium
Did you even read the post...? haha it's not that simple, or otherwise I would've fixed it.
make sure you are using the samsung cable that came with your phone.
I don't have the cable that came with my phone, but that has never stopped me before and I don't see why It would affect my computers ability to recognize my phone if it was perfectly capable of doing such before.
So, the system won't detect anything when you plug it in, not even after a reboot?
Well, there are a couple things you can try.
First, uninstall Kies and the Samsung USB drivers.
Reboot.
Install the drivers in my signature (they are older ones, but stable - unlike the newer ones).
If that doesn't work, try a new cable and USB port on your system.
If that doesn't work, it's bad hardware.
This will end with you flashing a stock image, probably.
Aerowinder said:
So, the system won't detect anything when you plug it in, not even after a reboot?
Well, there are a couple things you can try.
First, uninstall Kies and the Samsung USB drivers.
Reboot.
Install the drivers in my signature (they are older ones, but stable - unlike the newer ones).
If that doesn't work, try a new cable and USB port on your system.
If that doesn't work, it's bad hardware.
This will end with you flashing a stock image, probably.
Click to expand...
Click to collapse
The computer makes the sound when I plug in my phone, so it recognizes it. I just can't access the com port and use odin. I'm trying what you gave me right now
milesmarrero said:
The computer makes the sound when I plug in my phone, so it recognizes it. I just can't access the com port and use odin. I'm trying what you gave me right now
Click to expand...
Click to collapse
I don't suppose the device qhsusb_dload is detecting?
Aerowinder said:
So, the system won't detect anything when you plug it in, not even after a reboot?
Well, there are a couple things you can try.
First, uninstall Kies and the Samsung USB drivers.
Reboot.
Install the drivers in my signature (they are older ones, but stable - unlike the newer ones).
If that doesn't work, try a new cable and USB port on your system.
If that doesn't work, it's bad hardware.
This will end with you flashing a stock image, probably.
Click to expand...
Click to collapse
oh **** yes! Man you're the bomb! Those worked perfectly! Thanks, if I could thank you a thousand times I would! Thank you, odin worked fine that time!
milesmarrero said:
I don't have the cable that came with my phone, but that has never stopped me before and I don't see why It would affect my computers ability to recognize my phone if it was perfectly capable of doing such before.
Click to expand...
Click to collapse
Glad you got the problem solved. The reason I said to use the samsung cable is that I was able to root and flash my first rom with a non samsung cable then after that it wouldn't work unless I used the samsung cable.
I'm posting a question as I've spent days searching with no luck.
I have an LG G3 that while in normal use got very hot and turned off. Now it gets stuck at the LG logo and doesn't boot. I tried a normal factory reset but this just goes back to the LG logo and nothing happens.
So I'm trying to get into the download mode "Firmware Upgrade" screen to flash the stock rom. I hold down volume Up, and plug in the USB and it gets to the little "Download Mode" icon but does not continue to "Firmware Upgrade" and the computer (I've tried 3 different systems) wont recognize the phone.
Interestingly at some point while being in download mode it switched to fastboot, I have no idea how this happened but I was able to run commands on the phone using fastboot.exe, however I have not been able to get back to fastboot since.
Also I'd really like to be able to recover the data on the phone.
Any help would be appreciated.
Grymyrk said:
I'm posting a question as I've spent days searching with no luck.
I have an LG G3 that while in normal use got very hot and turned off. Now it gets stuck at the LG logo and doesn't boot. I tried a normal factory reset but this just goes back to the LG logo and nothing happens.
So I'm trying to get into the download mode "Firmware Upgrade" screen to flash the stock rom. I hold down volume Up, and plug in the USB and it gets to the little "Download Mode" icon but does not continue to "Firmware Upgrade" and the computer (I've tried 3 different systems) wont recognize the phone.
Interestingly at some point while being in download mode it switched to fastboot, I have no idea how this happened but I was able to run commands on the phone using fastboot.exe, however I have not been able to get back to fastboot since.
Also I'd really like to be able to recover the data on the phone.
Any help would be appreciated.
Click to expand...
Click to collapse
do you installed latest official lg drivers for your phone and if you have old drivers installed then uninstall these und install the newer and then reboot your computer.
maybe this help.
dusu84 said:
do you installed latest official lg drivers for your phone and if you have old drivers installed then uninstall these und install the newer and then reboot your computer.
maybe this help.
Click to expand...
Click to collapse
Thanks I tried the drivers you've provided but still no luck. The computer won't detect the phone at all, it doesn't attempt to install drivers nor does the phone show up as a generic device.
Grymyrk said:
Thanks I tried the drivers you've provided but still no luck. The computer won't detect the phone at all, it doesn't attempt to install drivers nor does the phone show up as a generic device.
Click to expand...
Click to collapse
maybe anyone can help you but i read in a german forum of someone with about the same problem... the the device reboots stuck at the lg logo and it wont recognize by the computer.
after all the repair service said it was a hardware defect!
dusu84 said:
maybe anyone can help you but i read in a german forum of someone with about the same problem... the the device reboots stuck at the lg logo and it wont recognize by the computer.
after all the repair service said it was a hardware defect!
Click to expand...
Click to collapse
I hope not, this phone was purchased in Media Markt in Germany and it's not covered by warranty here. LG Australia said it would cost up to $260 for them to fix it and the phone could possibly be downgraded if the mainboard needs to be replaced. I don't know if it would be possible to claim the German warranty.
dusu84 said:
maybe anyone can help you but i read in a german forum of someone with about the same problem... the the device reboots stuck at the lg logo and it wont recognize by the computer.
after all the repair service said it was a hardware defect!
Click to expand...
Click to collapse
Hello!!! I need some help I have an LG L65 D280N, and of nothing it turned on and open a pink screen whith a dbi err fatal!!! I tried too flash it with the costum firmware and everything but the problem is that when i tried to enter the firmware update mode the phone just won't enter it!!! I push the volume up wait 3 seconds and connect the usb cable to enter in firmware mode and the starts to vibrate like he is starting, but doesn't do anything, vibrates sometimes and after a wile it starts but enters in the dbi err fatal screen!!! I did some research and I reboot the PC because of the Driver installing, didn't work, I installed another driver and reboot the PC and it still doesn't work!!! I did a lot of research and I can't enter the firmware update mode!!! Please help me!!!
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
mitch1490 said:
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
Click to expand...
Click to collapse
Sorry this is for the desire.
Saf98 said:
Sorry this is for the desire.
Click to expand...
Click to collapse
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Help
mitch1490 said:
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Click to expand...
Click to collapse
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Avan7 said:
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Click to expand...
Click to collapse
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
Thanks a lot! I am going to give it a try .
Blessings.
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
n3m37h said:
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
Click to expand...
Click to collapse
please try removing the battery first.
mitch1490 said:
please try removing the battery first.
Click to expand...
Click to collapse
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
n3m37h said:
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
Click to expand...
Click to collapse
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
This is a forum for the HTC Desire Bravo A8181.
This is a forum for the HTC Desire Bravo A8181.
See with your own eyes.
Help please
mitch1490 said:
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
Click to expand...
Click to collapse
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Metal Addict said:
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Click to expand...
Click to collapse
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
mitch1490 said:
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
Click to expand...
Click to collapse
What version of SP Flashtool are you using?
Well I have tried everything everyone has said so far
No matter what I try I get
BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM!
Have tried using both
SP_Flash_Tool_v5.1352.01
SP-Flash-Tool-v5.1532.00
Both do the exact same thing, tried checking the AD DL ALL with Checksum boxes, unchecked usb high speed and full speed. Pressing the down button before plugging it it, after. Nothing I do seems to work, in the device manager it just keeps appearing and disappearing over and over
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (http://mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : http://easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: http://4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Hi
I have desire 200 won't turn on,stay in HTC logo
I just have recovery and fastboot with hboot 1.20.0000,,,s-on
I want to flash any ROM on it
Any one help me,please?
Sent from my V3 Plus using Tapatalk
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: 4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
You my friend are a gentleman and a scholar! downloaded and flashed right away and booted up Am on Win 7 x64 Pro
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Leoisback said:
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Click to expand...
Click to collapse
Yeah I forgot to mention that, you need to use the DA_SWSEC on the SP Flashtool. What's your htc 320 model? Your probably have the wrong rom. The telus one is only for NA device.
EDIT: Are you using the HTC Desire 320 with dual sim: http://drop.ndtv.com/TECH/product_database/images/15201573649PM_635_htc_desire_320.jpeg
If this is your device, the Telus rom is not for your device.
This is the EU rom: http://www.mediafire.com/download/z...NSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
Samsung SM-T800 is basically a paperweight.
Out the outset, let me just say that I have already:
-voided my warranty and tripped KNOX (it was rooted before all of this happened)
-Tried different USB ports and USB cables
-Tried different USB drivers
My PC won't recognize it, and I have tried Universal Drivers, and Samsung USB drivers, which means Odin and ADB can't help
I can only boot into download mode
When I tr to boot into recovery, I get the "Firmware upgrade encountered an issue" message
And to add insult to injury, I can't even turn the damned thing off. Every "battery pull" (Power+Volume down) leads back to "Firmware upgrade encountered an error" message
I have been wrestling with this thing for 2 days already, scouring these forums. And every one ends with "Oh I just reloaded my stock ROM with Odin" ARGHHHHH!
Thanks in advance
OK I'm gonna start off by saying I'm trying to help you. If you get smart and angry then I'll leave you to it.
Why am I saying this? Because I've been down this road many times with people saying this that and the other doesn't work when in the end in most cases it turns out to be user error and I can tell you're frustrated.
I've read your post regarding what you've tried but you're still gonna have to bear with it if you want help.
The first thing I need to ask is, you know the difference between download mode and recovery mode? No I'm not trying to treat you like an idiot.
Sometimes the firmware error can be cleared by booting to recovery and wiping cache.
How did you end up in this scenario?
If the above doesn't work the first thing you need to do is put the tablet in download mode.
Connect the USB cable, navigate to device manager, look for something along the lines of Samsung mobile USB composite device under USB devices.
If you see an exclamation mark instead then you will have to manually install the USB composite driver.
Once you see that device listed you are ready to use odin in download mode.
ashyx said:
OK I'm gonna start off by saying I'm trying to help you. If you get smart and angry then I'll leave you to it.
Why am I saying this? Because I've been down this road many times with people saying this that and the other doesn't work when in the end in most cases it turns out to be user error and I can tell you're frustrated.
I've read your post regarding what you've tried but you're still gonna have to bear with it if you want help.
The first thing I need to ask is, you know the difference between download mode and recovery mode? No I'm not trying to treat you like an idiot.
Sometimes the firmware error can be cleared by booting to recovery and wiping cache.
How did you end up in this scenario?
If the above doesn't work the first thing you need to do is put the tablet in download mode.
Connect the USB cable, navigate to device manager, look for something along the lines of Samsung mobile USB composite device under USB devices.
If you see an exclamation mark instead then you will have to manually install the USB composite driver.
Once you see that device listed you are ready to use odin in download mode.
Click to expand...
Click to collapse
First of all, thanx for the reply. I appreciate, and i probably shouldn't have written the post after being up all night and bieng pissed...probably came off a little snarky...
Having said all of that, yeah, I'm definitely in download mode:
(on screen right now)
ODIN MODE
Product Name: SM-T800
Current Binary: Samsung Official
System Status: Official
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0000)
AP SWREV: A1
[Picture of Android icon]
Downloading...Do not turn off target
So, that bit is sorted out
UPDATE: I did not have my SD card in the tablet before...now I put it in and I got the "USB devices not recognized"
I go to Device Manager, find the device with the yellow exclamation, right click,
"Update driver software"
"Browse computer for driver software:
Navigate to "Program Files/Samsung/USB Drivers"
The best software for your device is already installed
Any suggestions?
And again, apologies for sounding like a jerk before
"
UPDATE 2
OK, so I took another swig at it..
downloaded "Samsung USB Driver V1..5.59"
Rebooted
Opened ODIN
[Added]
Started reinstaling firmware
[Removed]
ODIN lost connection and I got the "USB device not recognized message" again
Used a cpl different ports, no change
I am wondering if maybe it is a battery issue at this point? Because as I stated before, I havent been able to turn the tablet off...
Either it is in download mode, or it is in "FIrmware upgrade encountered an issue" on screen
Thanks in advance
Destro728 said:
UPDATE 2
OK, so I took another swig at it..
downloaded "Samsung USB Driver V1..5.59"
Rebooted
Opened ODIN
[Added]
Started reinstaling firmware
[Removed]
Click to expand...
Click to collapse
OK this looks like you have the driver installed so you shouldn't have the exclamation mark in device manager.
You can however install the driver manually.
Right click the device with exclamation mark, choose browse my computer, let me pick from a list of drivers. Look for Samsung Mobile CDC composite device, click next.
Driver should now install.
There are several reasons for the USB not recognized error. Most common is a bad USB cable, bad USB port or driver conflicts.
Ensure the ports are native and not an add-on card.
I suggest a completely different cable first.
Whatever happens don't move the device or cable when flashing.
Also get some charge in the device with the stock charger.
If you still get issues installing the stock Firmware then I suggest trying to install my latest build of TWRP.
With this we have more options and can install the stock Firmware with it.
Thanks for response
Ok, I used a totally different laptop and ODIN worked fine, I dunno what the deal was...but now i have a different problem...
I seem to be stuck in a "Wifi Turning on..." loop
The Wifi never comes on though
I have seen other posts about this, but they all seems to come back to " factory reset" (which I did two more times today) or verify the date on the device (which I have also done)
Is it possible to download a radio image ONLY? Because I am wondering if that is the problem....
Destro728 said:
Thanks for response
Ok, I used a totally different laptop and ODIN worked fine, I dunno what the deal was...but now i have a different problem...
I seem to be stuck in a "Wifi Turning on..." loop
The Wifi never comes on though
I have seen other posts about this, but they all seems to come back to " factory reset" (which I did two more times today) or verify the date on the device (which I have also done)
Is it possible to download a radio image ONLY? Because I am wondering if that is the problem....
Click to expand...
Click to collapse
Most likely a baseband issue.
You need to use the correct firmware for your device and region.
Did you flash the whole firmware?
Yeah, downloaded the whole firmware
Couldn't find version for USA proper...ended up using XEF (which is France I think)
Build number LRX22G.T800XXU1BOCC (Lollipop)
Destro728 said:
Yeah, downloaded the whole firmware
Couldn't find version for USA proper...ended up using XEF (which is France I think)
Build number LRX22G.T800XXU1BOCC (Lollipop)
Click to expand...
Click to collapse
USA is XAR(Cellular South)
http://www.sammobile.com/firmwares/download/64107/T800XXU1BOL1_T800XAR1BOK1_XAR/
Ah, I didn't think I should use that one since my tablet is the WiFi model, not the LTE model
But I will give it a shot!
Thanks!
Destro728 said:
Ah, I didn't think I should use that one since my tablet is the WiFi model, not the LTE model
But I will give it a shot!
Thanks!
Click to expand...
Click to collapse
That is for the wifi model. LTE model is T805.
ashyx said:
That is for the wifi model. LTE model is T805.
Click to expand...
Click to collapse
Ah. The "Cellular South" part threw me off
Unfortunately, still didn't work as far as getting the WiFi and Bluetooth working.
I refrlashed the firmware
Did a cpl factory resets
Still nothing
I'm thinking I should root it and see if some file permissions are screwed up or something. ..
Sent from my SAMSUNG-SM-G870A using XDA-Developers mobile app
UPDATE: I rooted with CF AutoRoot and installed Custom recovery TWRP
did another factory reset
and still no Wifi/Bluetooth
I'm out of ideas at this point....
Destro728 said:
UPDATE: I rooted with CF AutoRoot and installed Custom recovery TWRP
did another factory reset
and still no Wifi/Bluetooth
I'm out of ideas at this point....
Click to expand...
Click to collapse
Did the wifi work before you obtained this device?
If all partitions flashed successfully then the wifi should be working.
What is your baseband build number reported as in settings?
Also check your IMEI no.
If that is the default IMEI instead of the original then someone may have trashed the EFS partition.
By the way are you certain this is a t800 and not a t805 or t807?
The Wifi went out a few days ago, tried a factory reset first
Then I remembered the last time this happened I did a firmware re-flash to fix it
It was during the re-flash where I ran into problems and I came to the forum.
I attached a screenshot. Model definitely SM-T800, but no IMEI and no Baseband build...
Thanks!
Destro728 said:
The Wifi went out a few days ago, tried a factory reset first
Then I remembered the last time this happened I did a firmware re-flash to fix it
It was during the re-flash where I ran into problems and I came to the forum.
I attached a screenshot. Model definitely SM-T800, but no IMEI and no Baseband build...
Thanks!
Click to expand...
Click to collapse
Baseband probably doesn't show because it's wifi only model.
However it's strange there is no Status page.
You can get this info using an app called Samsung phone info on play.
ashyx said:
Baseband probably doesn't show because it's wifi only model.
However it's strange there is no Status page.
You can get this info using an app called Samsung phone info on play.
Click to expand...
Click to collapse
Ironically, with no WIfi access...hahahahaa....
I will try to find the apk and sideload it
I sideloaded the Samsung phone info app...
Attached screenshots of the tablet info
What's immediately apparent is no IMEI number. This is a problem.
Is your EFS folder accessible?