I am running the newest version of the pacman rom. For some reason my 3g and gps is no longer working at all. I am also running the FL04 modem
zdblair0 said:
I am running the newest version of the pacman rom. For some reason my 3g and gps is no longer working at all. I am also running the FL04 modem
Click to expand...
Click to collapse
You need to flash an ICS or GB modem.. JB modems are only for JB TW builds..
ugh, just a week ago, i was told i needed jb modem cause my mms wasnt downloading
zdblair0 said:
ugh, just a week ago, i was told i needed jb modem cause my mms wasnt downloading
Click to expand...
Click to collapse
On pacman?? Give me just a min to look back at your previous posts.
:edit: Ok, I see where you were told that. Go back to Fi27 modem, test and confirm that 3g/4g/data work.. And then let's go back to your other thread on the MMS issue. Post in that thread that the issue isn't resolved.
Sent from my SPH-D710 using Xparent ICS Tapatalk 2
Related
I'm having connectivity issues with the Bell network all of sudden. I'm on DarkyRom 10.2 with the JVQ modem. Has anyone else noticed any issues? Would another modem be a better choice?
Thanks!
Fullarton said:
I'm having connectivity issues with the Bell network all of sudden. I'm on DarkyRom 10.2 with the JVQ modem. Has anyone else noticed any issues? Would another modem be a better choice?
Thanks!
Click to expand...
Click to collapse
Use the KG3 modem.
Was this randomly, or did you change something? You may need to setup your APN, for example. Good luck!
Fullarton said:
I'm having connectivity issues with the Bell network all of sudden. I'm on DarkyRom 10.2 with the JVQ modem. Has anyone else noticed any issues? Would another modem be a better choice?
Thanks!
Click to expand...
Click to collapse
I've got the bell i9000m as well and use the current jvt modem with no issues on bell.
You could try to upgrade to jvt or like the last poster said flash kg3.
I believe perka's file stash on the market will have a cement version on kg3.
Good luck.
Sent via Tapatalk with my Samsung Galaxy Tab running Overcome 4.0 on GB 2.3.3
ordio said:
I've got the bell i9000m as well and use the current jvt modem with no issues on bell.
You could try to upgrade to jvt or like the last poster said flash kg3.
I believe perka's file stash on the market will have a cement version on kg3.
Good luck.
Sent via Tapatalk with my Samsung Galaxy Tab running Overcome 4.0 on GB 2.3.3
Click to expand...
Click to collapse
I'm having the same issue with JVT and I can't find the KG3 on the file stash? Is there another location? Any idea why this would be happening as of a sudden?
Thanks for your help!
Fullarton said:
I'm having the same issue with JVT and I can't find the KG3 on the file stash? Is there another location? Any idea why this would be happening as of a sudden?
Thanks for your help!
Click to expand...
Click to collapse
There's no logical explanation for it to work and then out of no where stop working. You likely did something to cause this. Were you tinkering with the phone at all before this issue first came up? Anything at all?
And just google for the modem.
I don't believe so. The phone says the baseband is JVT but the Kernel is still darkcore 2.9.1_JVQ and the build number is DarkyROM JVQ v10.2.
Could this be causing the issue?
To clarify, does "connectivity issues" mean you cannot connect, or you're signal is consistently weak? If it's the former, check your APNs—you may have to reflash the firmware; if it's the latter, that's a very strange error to have randomly popped up. But do try the KG3 modem.
The phone won't be able to connect to the data network for long periods of time. I still have bars but the H and 3G symbols are not present.
It will work for a while and then go dead. I will try the KG3 modem.
Fullarton said:
The phone won't be able to connect to the data network for long periods of time. I still have bars but the H and 3G symbols are not present.
It will work for a while and then go dead. I will try the KG3 modem.
Click to expand...
Click to collapse
Curious do you have any apps like superpower? That controls the data and wifi connections?
I noticed on my tab that I have issues with my wifi and when this happens I just restart.
See if that could be it?
Sent from my GT-I9000M using some custom ROM (JVT) using Gingerbread 2.3.5 with Tapatalk
I just flashed to darky's 10.2 from 9.5 and i just installed the KG3 modem. So far it seems to work pretty good but the real test will be when i go back to work later this week. If i get good signal in there then I know it will be good.
I was using the JL2 modem before when I was on darky's 9.5 and it worked great. If the KG3 doesn't work out i will probably go back to JL2.
Has anyone managed to get wifi tether working on a Galaxy Nexus with 4.2.2? Since the latest update (I'm running Verizon's version), wifi tether stopped working again. I was running treve's 3.2 pre version which worked on 4.1 but not anymore. I've tried tweaking the different settings on the 11_22 mod but to no avail.
Any tips???
Rooted but stock 4.2.2 Galaxy nexus
Bump
Take a look here:
ht tps://code.google.com/p/android-wifi-tether/issues/detail?id=1661#c39
It seems they changed something and the code will need to be updated.
Check this post:
http://forum.xda-developers.com/showthread.php?p=30890946
Sent from my Galaxy Nexus using Tapatalk 2
JPBeard21 said:
Check this post:
http://forum.xda-developers.com/showthread.php?p=30890946
This addition by mwalt did the job for me. For info purposes, I'm on a VZW GNex running mwalt's ROM (also on the same page). Don't know if this will work on any other ROM, but I'd guess that the closer to stock, the better the chance.
Click to expand...
Click to collapse
I use wifi tether on 4.2.2 CM10.1 and it works.
Thanks
stevesixty8 said:
JPBeard21 said:
Check this post:
http://forum.xda-developers.com/showthread.php?p=30890946
This addition by mwalt did the job for me. For info purposes, I'm on a VZW GNex running mwalt's ROM (also on the same page). Don't know if this will work on any other ROM, but I'd guess that the closer to stock, the better the chance.
Click to expand...
Click to collapse
Thanks. I'm just waiting to hear if it will work on the stock 4.2.2 ROM.
Oh, BTW, I think the current thread for mwalt2's 4.2.2 ROM is located HERE. The Two threads linked above are for the 4.1.1 ROM.
Click to expand...
Click to collapse
tim k said:
stevesixty8 said:
Thanks. I'm just waiting to hear if it will work on the stock 4.2.2 ROM.
Oh, BTW, I think the current thread for mwalt2's 4.2.2 ROM is located HERE. The Two threads linked above are for the 4.1.1 ROM.
Click to expand...
Click to collapse
I had the same issue (using stock OTA 4.2.2 on VZW GNEX, rooted) - I used the patch in reply #109 in this thread and works perfectly now:
htt ps://code.google.com/p/android-wifi-tether/issues/detail?id=1661#c39
Click to expand...
Click to collapse
My problem is I have sprint will that work with my phone ...I really need this fixed as in a week we r going to big bear with friends and need WiFi
Thanks
https://code.google.com/p/android-wifi-tether/issues/detail?id=1661
In post #98 pfngu found a fix and posts the apk with the fix in #109.
So, using the apk posted in that thread, can anyone successful use their Xbox? On 4.2.2?
Galaxy Nexus+Baked+Lean+TWRP=BOOM SHAKALAKA
Latest experimental is the only thing that worked for me on Verizon Galaxy Nexus.
https://code.google.com/p/android-wifi-tether/issues/detail?id=1661 #197
https://android-wifi-tether.googlecode.com/files/wifi_tether_v3_4-experimental1.apk
Had to set device profile manually.
I downloaded the cdma file for the SPH-L710 from Sammobile.com and flashed it with Mobile Odin. I now have 4.1.2 but my Wi-Fi radio won't turn on no matter what I do. The 4G is working and everything else is OK except my e-mail went from white background with black letters to black background with white letters. I can live with the e-mail like that but I need my Wi-Fi! Any help would be greatly appreciated.
nastypup said:
I downloaded the cdma file for the SPH-L710 from Sammobile.com and flashed it with Mobile Odin. I now have 4.1.2 but my Wi-Fi radio won't turn on no matter what I do. The 4G is working and everything else is OK except my e-mail went from white background with black letters to black background with white letters. I can live with the e-mail like that but I need my Wi-Fi! Any help would be greatly appreciated.
Click to expand...
Click to collapse
WiFi not kicking on is Kernel related, If you flashed a different one, Reflash it or try a different one.
milky1112 said:
WiFi not kicking on is Kernel related, If you flashed a different one, Reflash it or try a different one.
Click to expand...
Click to collapse
I only flashed the firmware from sammobile.com. Is there a stock kernel available that is compatible with 4.1.2?
nastypup said:
I only flashed the firmware from sammobile.com. Is there a stock kernel available that is compatible with 4.1.2?
Click to expand...
Click to collapse
What rom you currently rocking? and link me the file you flashed please. See this thread http://forum.xda-developers.com/showthread.php?t=1910947&highlight=md4 And read OP, The Stock MD4 (4.1.2 Touch Wiz) Kernel is in there. Also has his Optimized kernel. Be sure to say thanks to Freeza.
milky1112 said:
What rom you currently rocking? and link me the file you flashed please. See this thread http://forum.xda-developers.com/showthread.php?t=1910947&highlight=md4 And read OP, The Stock MD4 (4.1.2 Touch Wiz) Kernel is in there. Also has his Optimized kernel. Be sure to say thanks to Freeza.
Click to expand...
Click to collapse
The link is here:
http://www.sammobile.com/firmwares/1/?model=SPH-L710&pcode=0#firmware
I used the 2013 April (4.1.2)
-------------------------------------------------------------------------------
I saw the stock MD4 (4.1.2) Touch Wiz but I was unsure if Touch Wiz is what I needed. I am on Sprint in the US and my phone is SPH-L710. With my Galaxy S1, I had Cyanogen Mod which I flashed nightly builds and then my phone died (black screen) after 2 years. I've had the S3 for a few months. I rooted it but did not modify anything so my flashing skills are rusty . Someone suggested Mobile Odin so that's what I used to flash the firmware.
milky1112 said:
What rom you currently rocking? and link me the file you flashed please. See this thread http://forum.xda-developers.com/showthread.php?t=1910947&highlight=md4 And read OP, The Stock MD4 (4.1.2 Touch Wiz) Kernel is in there. Also has his Optimized kernel. Be sure to say thanks to Freeza.
Click to expand...
Click to collapse
Freeza's file was missing but I found the kernel here:
http://www.sxtpdevelopers.com/showthread.php?t=233
I flashed it with Mobile Odin and now, I have 4.1.2 and Wi-Fi. Yay! This Senior Citizen is now happy :victory:
I would just flash freeza's customized kernel (like milky said). You can do it from custom recovery...
nastypup said:
Freeza's file was missing but I found the kernel here:
http://www.sxtpdevelopers.com/showthread.php?t=233
I flashed it with Mobile Odin and now, I have 4.1.2 and Wi-Fi. Yay! This Senior Citizen is now happy :victory:
Click to expand...
Click to collapse
Glad to hear your back to "normal" :laugh:
I GOT A TMO 4.3 UPDATE UP AND RUNNING AND WAS WONDERING IF ANYONE KNOW WHERE THE WIFI FILES ARE LOCATED OR CAN DIRECT ME IN THE RIGHT DIRECTION TO GET WIFI WORKING?
ANY HELP OR GOOD RESPONSE IS GREATLY APPRECIATED
Tj.......................
re: 4.3 leak
badboytw said:
I GOT A TMO 4.3 UPDATE UP AND RUNNING AND WAS WONDERING IF ANYONE KNOW WHERE THE WIFI FILES ARE LOCATED OR CAN DIRECT ME IN THE RIGHT DIRECTION TO GET WIFI WORKING?
ANY HELP OR GOOD RESPONSE IS GREATLY APPRECIATED
Tj.......................
Click to expand...
Click to collapse
Where exactly did you find and download the leaked 4.3 TMO rom?
Was it an ODIN flashable TAR file or a cwm/twrp custom recovery zip file rom?
Either way most likely it's never going to have wifi unless you are a developer.
In order to get the wifi working with some leaked rom you flashed it will take a
lot more than just copying some files into your phone.
I just wonder if your rom came from the "Samsung Galaxy S 4 i9500, i9505, i9505G " forum?
In any case good luck with it!
Misterjunky said:
Where exactly did you find and download the leaked 4.3 TMO rom?
Was it an ODIN flashable TAR file or a cwm/twrp custom recovery zip file rom?
Either way most likely it's never going to have wifi unless you are a developer.
In order to get the wifi working with some leaked rom you flashed it will take a
lot more than just copying some files into your phone.
I just wonder if your rom came from the "Samsung Galaxy S 4 i9500, i9505, i9505G " forum?
In any case good luck with it!
Click to expand...
Click to collapse
Thx and i got the Dump from http://androidfannetwork.com/2013/10/12/android-4-3-system-dump-for-t-mobile-samsung-galaxy-s4-leaked/ and only way i got the Dump to work was to do a overwrite on a i9505 system and KToonz Kernel was just for speed
badboytw said:
Thx and i got the Dump from http://androidfannetwork.com/2013/1...m-dump-for-t-mobile-samsung-galaxy-s4-leaked/ and only way i got the Dump to work was to do a overwrite on a i9505 system and KToonz Kernel was just for speed
Click to expand...
Click to collapse
Can u post a flash able zip?
Sent from my SGH-M919 using XDA Premium 4 mobile app
that is the same dump that was posted in our General Forum.
elesbb said:
that is the same dump that was posted in our General Forum.
Click to expand...
Click to collapse
yea but was wondering if i could get wifi to work or would i need to wait til 18th?
badboytw said:
yea but was wondering if i could get wifi to work or would i need to wait til 18th?
Click to expand...
Click to collapse
Its working fine for me if you set the flashable zip file up correctly and are using a proper kernel. The only issue i am having with my 4.3 ROM is the stupid network loosing signal on sleep. I'm 99.9 percent convinced this is due to not having the upgraded radio.
elesbb said:
Its working fine for me if you set the flashable zip file up correctly and are using a proper kernel. The only issue i am having with my 4.3 ROM is the stupid network loosing signal on sleep. I'm 99.9 percent convinced this is due to not having the upgraded radio.
Click to expand...
Click to collapse
thats funny bc its everything is working 99% but just no wifi lol my data nvr drops
bc this 4.3 MI9 is stock rooted but trying to figure where or what i went/did wrong!
mind pm'ing what you got so i can see what im missing or doing wrong?
badboytw said:
thats funny bc its everything is working 99% but just no wifi lol my data nvr drops
bc this 4.3 MI9 is stock rooted but trying to figure where or what i went/did wrong!
mind pm'ing what you got so i can see what im missing or doing wrong?
Click to expand...
Click to collapse
So even on 4G when the screen shuts off you don't loose cell network?
elesbb said:
So even on 4G when the screen shuts off you don't loose cell network?
Click to expand...
Click to collapse
nope, i get 4G and LTE just fine no issues pm me ur rom and ill send mine so you can take a look maybe we can fix something and mayb someone or a Dev can get this out as a rom for TMO b4 the 18 bc i knw ppl want to be on 4.3 not use International Rom
elesbb said:
So even on 4G when the screen shuts off you don't loose cell network?
Click to expand...
Click to collapse
how is your WIFI working and mine isnt?
I told you before. You have to use talexop or faux kernel for wifi to work. If you want to switch kernels then flash echoe rom wifi fix.
Sent from my SGH-M919 using Tapatalk
Sorry if this is addressed elsewhere but i could not find it.
I have a T999. I moved out of TMO coverage and changed to straight talk using AT&T. Everything (call data) works great.
I am looking for a AT&T Kit Kat TW stock port if there is one out there. I looked in the Dev pages and didn't find any.
I can build it if I need to. but need to know, can I just take the stock AT&T rom and change the modem and flash with ODIN or with a custom recovery?
Right now I'm newest stock rooted. I used to do a lot, but it's been a while.
Never flash firmware from another device. Currently there is only likewise. TMS3KK will be out very soon. I've got an NE4 port in the works but just haven't been home much so haven't finished it.
You can flash AT&T roms, but unless properly ported you may have some issues, primarily with the network.
Thanks ... I figured all the radios would be broke. Didn't know if there was any other difference.
I can wait a bit ...
In the at&t section there's a 442 system dump. Its what I've been running. Flashes, runs fine on latest t999 radio
Here ya go. Just flash Ktoonz kernel after ROM.
http://forum.xda-developers.com/showthread.php?t=2788357
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
bobshute said:
Thanks ... I figured all the radios would be broke. Didn't know if there was any other difference.
I can wait a bit ...
Click to expand...
Click to collapse
There is a new ATT KK ROM Port by TalkingMonkeys in Android Development.