Noticed a few problems on my S3 with cm10 (stable).
1. After a call, the screen won't come back on. I try pushing the power button or home button but still no display, the backlighting on the menu and return button does come on but no display.
2. My bluetooth does not auto connect to my cars bluetooth. I have to turn off and turn on bluetooth on the phone to have it connect to the car each time. (On stock firmware, it auto connects everytime i get in the car.)
deciding whether or not to update to the 10.1 nightly...
Related
My PDA2k seems to be turning itself off even when in use :?
I use TomTom3 in the car, and even when the power is plugged into the bottom it was turning off ever few minutes.
I just took a phone call and when I has finished talking I noticed the screen had gone blank and pressing the red handset didn't bring it back, the power button did. (I do have screen lock on).
Having said that, thinking about it, I was watching TV progs on WMP on the way home and it never shut itself off once :?:
Anyone have any idea what is going on? Is this normal?
I have an o2 XDA2 S running TomTom 3 with the TomTom cradle. I occassionally find that the pda just turns itself off.
It doesn't happen all the time.
I have also found that sometimes during a call the pda turns itself off and I cant get it back on by pressing the handset key, just the on off button.
Cheers
Fatzzz
click start>settings>system>backlight . . in here you can change the time it takes to turn off in not touched the device, 5 mins max.... also if you click button lock in system settings, you can set it so that when it happens, you can tap screen and it comes back on again.... tho i prefer to keep that off, otherwise it may ring people while it its protective case.. :lol:
and going by all the software that is out for these xda's, you can prob find a programe /or hack to change it even longer if you need that!!!
But when it is on external power (plugged into the car using TT3), it shouldn't shut down at all. Aside that, when in use (when receiving a call) I wouldn't think it should shut down should it?
I have a seperate scren lock installed too. I found the built in one not enough. When it is in my belt pouch and I get a text, or connect to my BT car kit or something, it wakes it up. All of a sudden all the keys are being pressed (by the squeeze of the case) and all kinds of applications are opening!
i inherited a tilt 2 that i am using withut a sim card. just wifi, and primarily as a skype phone at home.
works ok with skype, but how do i get wifi to stay on with screen off? everytime i kill the screen with the power button, wifi turns off.
and, even with power settings arranged for screen to go off (both on batt and ac power), the screen never goes black on its own... i have to push power button.
im up for changing roms too... so if u have any advice, all i need is wifi and skype to work. period.
here ya go, fixes wifi stand by issue.
thanks. download and installed... seems to have done the trick.
Got the OTA update today.. installed with no issues, but now my bluetooth wont turn on.. Cant use the wigit, i go to settings and click the button to turn BT on and it just goes dim and does nothing. but turn white agian.. any ideaS?
Hi all! I am a owner of not well known MTCB-MD and have a few issues with it. Unit was updated to Malaysk rom for RK3066 android 4.4.4 and mcu is updated from MTCB-MD-1.83V to MTCB-MD-2.67V.
First problem is that power buton is not working. Cannot turn it off (it turns on and off via car key), and can´t make selection in recovery (reboot, restore, update, factory reset...). When MTC is on and I push power button it acts like HOME button (and I tried with all launchers).
Second thing is that 3 keys on the right are not working at all, and buttons on the left are remaped without any sense, luckly disc eject is displayed on screen, it is only way to eject CD/DVD.
Third thing is about Wi-Fi. Sometimes it turns on and immediately connects to network, sometimes it is stucked on Turning on Wi-Fi, sometimes it drops connection with phone which is 20cm away from unit.
Any idea how to roll back to original android version and where to find mcu version 1.83? And how to even upgrade/downgrade it when i can´t select any option in Recovery mod???
THANKS IN ADVANCE FOR YOUR RESPONSE!
blackwood91 said:
Hi all! I am a owner of not well known MTCB-MD and have a few issues with it. Unit was updated to Malaysk rom for RK3066 android 4.4.4 and mcu is updated from MTCB-MD-1.83V to MTCB-MD-2.67V.
First problem is that power buton is not working. Cannot turn it off (it turns on and off via car key), and can´t make selection in recovery (reboot, restore, update, factory reset...). When MTC is on and I push power button it acts like HOME button (and I tried with all launchers).
Second thing is that 3 keys on the right are not working at all, and buttons on the left are remaped without any sense, luckly disc eject is displayed on screen, it is only way to eject CD/DVD.
Third thing is about Wi-Fi. Sometimes it turns on and immediately connects to network, sometimes it is stucked on Turning on Wi-Fi, sometimes it drops connection with phone which is 20cm away from unit.
Any idea how to roll back to original android version and where to find mcu version 1.83? And how to even upgrade/downgrade it when i can´t select any option in Recovery mod???
THANKS IN ADVANCE FOR YOUR RESPONSE!
Click to expand...
Click to collapse
In the settings/factory settings/ there is an option for button layout. Change it to what works with your setup.
Contact your seller or manufacturer for files.
I have already tried all button layout options but nothing changes.
UPDATE: This morning new problem came out. MCU starts when I start engine, display logo, boot to homescreen, and after few seconds starts again displaying VW logo and it´s stuck on it...
Would it help to connect it to laptop via USB-A/USB-A cable and reinstall software/firmware with RK software?
I have the OnePlus 5t and recently I bought the redmi airdots (Bluetooth 5.0 earphones) and I have some troubles to pair them. Every time i connect to them I get a notification asking me to pair and connect (pairing request), when I press yes, a pop up message appear asking to pair and connect again, then a press yes and it connects normally. the thing is, I had another Bluetooth headset from xiaomi too and when i simply turn on the headset it automatically connects without prompting to pair and connect like the airdots.
my question is, can I get rid of this notification and pop up message asking to pair? I would like to simply turn on my earphones and it automatically connect to my phone without the need to every time confirm to pair (since the earphones already are paired).
I already cleared the cache in the bluetooth app and reset the phone, but still nothing.
I had the same issue as you and this method solved the problem:
Procedure: STEP_1. Put your Airdrops in the box, make sure that its charged. Delete airdots from your bluetooth device in your phone.
STEP_2. Take out both of your Airdrops from box
STEP_3. Turn off both of Airdrops by pressing and keeping the button on it for 5 seconds (until you see red light)
STEP_4. Perform 2 kinds of reset (reset of stored Bluetooth device and reset of connection between both Airdrops headphones) To make this reset, press and hold the button on both airdrops for 20seconds (headphone have to blink after 10seconds and 20seconds) don't release the buttons until you don't see second blinking.
STEP_5. Turn on your Airdrops by pressing and holding the button on both of it for 5seconds or put it in box and take it out. (when you take it out from box they will automatically turn on).
After done restart, on right headphone, you have to see blinking white light but on the left one, you have to see no light. It's mean that there is connection between headphones, and right headphone is waiting for connection with the phone.
mazzidev said:
I had the same issue as you and this method solved the problem:
Procedure: STEP_1. Put your Airdrops in the box, make sure that its charged. Delete airdots from your bluetooth device in your phone.
STEP_2. Take out both of your Airdrops from box
STEP_3. Turn off both of Airdrops by pressing and keeping the button on it for 5 seconds (until you see red light)
STEP_4. Perform 2 kinds of reset (reset of stored Bluetooth device and reset of connection between both Airdrops headphones) To make this reset, press and hold the button on both airdrops for 20seconds (headphone have to blink after 10seconds and 20seconds) don't release the buttons until you don't see second blinking.
STEP_5. Turn on your Airdrops by pressing and holding the button on both of it for 5seconds or put it in box and take it out. (when you take it out from box they will automatically turn on).
After done restart, on right headphone, you have to see blinking white light but on the left one, you have to see no light. It's mean that there is connection between headphones, and right headphone is waiting for connection with the phone.
Click to expand...
Click to collapse
This fixed the problem. Thank you!