Develop Bugs

[Q] After Update Recovery Mode NO COMMAND

I've updated my phone from 4.1.2 into 4.2.2 via OTA and successful. The problem is after updated the phone is very slow and I'd like to reset. I try to press Volume Up + Home + Power but I can't enter recovery mode menu instead NO COMMAND picture.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Help me please.

alid_abdul said:
I've updated my phone from 4.2.1 into 4.2.2 via OTA and successful. The problem is after updated the phone is very slow and I'd like to reset. I try to press Volume Up + Home + Power but I can't enter recovery mode menu instead NO COMMAND picture.
Help me please.
Click to expand...
Click to collapse
The No command is generated when you don't flash Fix-Recovery.zip after you flash your first custom recovery over samsung's
Take the recovery .tar file from here according to firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Follow the steps in this post : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19

alid_abdul said:
I've updated my phone from 4.2.1 into 4.2.2 via OTA and successful. The problem is after updated the phone is very slow and I'd like to reset. I try to press Volume Up + Home + Power but I can't enter recovery mode menu instead NO COMMAND picture.
Help me please.
Click to expand...
Click to collapse
Flash CWM and then reboot recovery by pull out battery-insert it-volume up+home+power
NOTE: it will disable ota update and replace your recovery. If you want to enable Ota update, use Wanam Xposed
Sent from my GT-I9082 using Tapatalk

iceyhotguy said:
The No command is generated when you don't flash Fix-Recovery.zip after you flash your first custom recovery over samsung's
Take the recovery .tar file from here according to firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Follow the steps in this post : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
Click to expand...
Click to collapse
black87 said:
Flash CWM and then reboot recovery by pull out battery-insert it-volume up+home+power
NOTE: it will disable ota update and replace your recovery. If you want to enable Ota update, use Wanam Xposed
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Actually my phone still using stock ROM, haven't flashing using other ROM so far

alid_abdul said:
Actually my phone still using stock ROM, haven't flashing using other ROM so far
Click to expand...
Click to collapse
If there 4.2.1 for grand duos (just kidding)
Sent from my GT-I9082 using Tapatalk

black87 said:
If there 4.2.1 for grand duos (just kidding)
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Oooppss sorry misstype -____-
4.1.2 not 4.2.1 hehehe

alid_abdul said:
Actually my phone still using stock ROM, haven't flashing using other ROM so far
Click to expand...
Click to collapse
If you mean is revert from 4.2->4.1, you need to download from sammobile.com . and flash it with ODIN, make sure the country code is correct.
Be careful when flashing with Odin, its more safe if you flashing on your laptop, because the phone will HARDBRICKED if your usb accidentialy removed or electricity unstable.
If phone goes bootloop, wipe data and cache
Sent from my GT-I9082 using Tapatalk

alid_abdul said:
Actually my phone still using stock ROM, haven't flashing using other ROM so far
Click to expand...
Click to collapse
Doesn't matter if you are on stock or custom ROM, if you want your phone rooted, the process of installing CWM is the same as I mentioned above.

Thanks all,
It solved with weird way, press the vol up+home+power and appear no command, and I just wait around 7-10 minutes then recovery menu appear. Weird -__-

no command nt even rooted
iceyhotguy said:
The No command is generated when you don't flash Fix-Recovery.zip after you flash your first custom recovery over samsung's
Take the recovery .tar file from here according to firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Follow the steps in this post : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
Click to expand...
Click to collapse
hello sir,
i tried to root my phone by the method given by explore gadgets to root 4.4.2 running note 2...can't post the link being a new member..
after i flashed twrp recovery using odin...to flash super user file i opened recovery mode..since then it's showing no command error...couldn't even flash the su file...nd i chked the emulator...it is showing the phone is not rooted.
plz tell me what happened and kindly resolve the issue too..thank you.

mansi0312 said:
hello sir,
i tried to root my phone by the method given by explore gadgets to root 4.4.2 running note 2...can't post the link being a new member..
after i flashed twrp recovery using odin...to flash super user file i opened recovery mode..since then it's showing no command error...couldn't even flash the su file...nd i chked the emulator...it is showing the phone is not rooted.
plz tell me what happened and kindly resolve the issue too..thank you.
Click to expand...
Click to collapse
I do not have a note 2 so I can't simply solve it for you.
You should head over to note 2 section of XDA and use the threads dedicated to showing how to root and troubleshooting problems.
Try this: http://forum.xda-developers.com/showthread.php?t=2730764
Good luck sir.

Helo sir my phone model Samsung galaxy grand neo in recovary mode says no command error and my recovery not working....help me to fix this problem and solved out.......mail my Gmail I'd. [email protected]
..
I wait your mail with your ans

Samsung Note II N7100 International will not boot up

Hi All,
For the past few weeks (6 weeks) I had performed 3 phone factory resets. It was my first time having had to perform a factory reset due to the malfunctions in key applications such as Play Store, Clock, etc, which began to stop working. My initial reset was due to "Unforuntately Clock has stopped.", where my second was due to Play Store, and my third being process.system. This sudden requirement to perform this many resets, in order for my phone to operate normally for a week or two, before I had to reset it again had me believe something was wrong with my phone.
It was until last Saturday my phone was working. My phone had froze, causing me to force shut down and reboot. However, unfortunately, it didn't reboot back up -ever. The phone hung on the first Samsung splash screen "Samsung Galaxy Note II - N7100". It stayed like this for well over half a hour, where I tried again, and still, the splash screen stayed.
After doing some research on the web, forums and articles advised for a wipe / factory reset through Recovery mode by holding VolUp+Home+Power, which I tried. But unfortunately errors messages appeared.
E:failed to mount /efs (No such file or directory)
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/last_recovery
E:failed to mount /data (No such file or directory)
E:Can't mount /data/log/recovery_log.txt.
... (etc) - refer to photos
When I tried to wipe data/factory reset, the following appeared:
Wiping data...
Format /data...
E:Format_volume: make_extf4fs failed on dev/block/mmcblk0p12
Format /cache
E:Format_volume: make_extf4fs failed on dev/block/mmcblk0p12
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Additional info:
I tried plugging my phone into my computer and run Kies, but my phone couldn't be picked up.
This phone is a Samsung Note II International phone which I had grey-imported, where unfortunately it will be difficult for me to get it locally serviced without paying.
This phone is not rooted.
I am able to go into both recovery and download mode on the phone.
I hope that you guys can help me get this phone up and running again.
Many thanks!

try flash for new rom option in recovery

Download this and follow steps in the link
http://www.sammobile.com/firmwares/3/?download=28988
Sent from my GT-I9506 using Tapatalk
---------- Post added at 05:43 PM ---------- Previous post was at 05:42 PM ----------
Download this file and try flash through odin
Follow steps better, I hope it helps.
Report back please.
http://www.sammobile. com/firmwares/3/?download=28988
Remove the space . Com
Sent from my GT-I9506 using Tapatalk

mezo91 said:
Download this and follow steps in the link
Sent from my GT-I9506 using Tapatalk
---------- Post added at 05:43 PM ---------- Previous post was at 05:42 PM ----------
Download this file and try flash through odin
Follow steps better, I hope it helps.
Report back please.
Remove the space . Com
Sent from my GT-I9506 using Tapatalk
Click to expand...
Click to collapse
thanks for the response. I followed the instructions and it doesn't seem to work.
i.imgur.com/wO3B0h5.png

Looks like internal sdcard died or invalid partitions. Try Emergency Repair/flash with Kies. Good luck!
Verstuurd vanaf mijn GT-N7100 met Tapatalk

MarcoHafkamp said:
Looks like internal sdcard died or invalid partitions. Try Emergency Repair/flash with Kies. Good luck!
Verstuurd vanaf mijn GT-N7100 met Tapatalk
Click to expand...
Click to collapse
it doesn't seem to work. I have no Emergency recovery code, nor is it being listed in the 'list of devices requiring emergency recovery'
thanks for the response
help - i'm still stuck :/

Your device's eMMC is needed to replace a new one.
Sent from my Assistant

biokiller said:
Your device's eMMC is needed to replace a new one.
Sent from my Assistant
Click to expand...
Click to collapse
I guess, i'm better off getting a new phone ...

Maybe try to get a note 2 pit file and put it too. I hope it fixes it.
Sent from my GT-I9506 using Tapatalk

mezo91 said:
Maybe try to get a note 2 pit file and put it too. I hope it fixes it.
Sent from my GT-I9506 using Tapatalk
Click to expand...
Click to collapse
unfortunately ... still doesn't work
i.imgur.com/GNW8G3f.png

Try to flash same or new stock rom. Maybe SDS.

gencho81 said:
Try to flash same or new stock rom.If before this problem you where with 4.3 it wont let you to flash this from the picture (4.1)
Click to expand...
Click to collapse
Sorry, i'm confused to which ROM i should be flashing. I tried the ROM which mezo91 provided, and other ROMs (from China, and Hong Kong; because I believe the phone was from there), and it still didn't work.
Is there a specific stock ROM you could recommend me? Perhaps a link to it?
Thanks!

Bllyann said:
Sorry, i'm confused to which ROM i should be flashing. I tried the ROM which mezo91 provided, and other ROMs (from China, and Hong Kong; because I believe the phone was from there), and it still didn't work.
Is there a specific stock ROM you could recommend me? Perhaps a link to it?
Thanks!
Click to expand...
Click to collapse
I edit my post .Possible eMMC brick.On witch android was before this happen?

gencho81 said:
I edit my post .Possible eMMC brick.On witch android was before this happen?
Click to expand...
Click to collapse
I think it was on Android 4.3 if I recall correctly. I could be wrong

Bllyann said:
I think it was on Android 4.3 if I recall correctly. I could be wrong
Click to expand...
Click to collapse
try reflashing 4.3 or try to flash Philz recovery lets say first in order to try flashing custom rom

Bllyann said:
I think it was on Android 4.3 if I recall correctly. I could be wrong
Click to expand...
Click to collapse
Is your device still under warranty?
Do you use knox container or will use it?
If no, then I recommend you flash a custom recovery as stated, download a custom rom, choose one which is as close to stock as possible, I recommend omega rom it is closest to stock. And try to see if it boots.
Can you do that by yourself?
If not, send me a private message and I can help you from there and send you links in order your devoce to boot and be working again.
Or I can say here anyway. But I will tell you to choose the same recovery I use and send you links for it.
Sent from my GT-I9506 using Tapatalk
---------- Post added at 12:44 PM ---------- Previous post was at 12:38 PM ----------
Bllyann said:
I guess, i'm better off getting a new phone ...
Click to expand...
Click to collapse
If you plan to get a new phone and throw this one bcuz dead then follow this I will give all links at bottom. Lets try boot this note 2 up^^
1. Download twrp recovery, download the tar.md5 file. In their download links there is no tar.md5. So we will flash a cwm recovery bcuz it is .tar.md5. Then through cwm we will flash twrp.zip recovery.
Why I need .tar.md5.? Bcuz we need first to flash through odin.
2. After custom recovery is setup and I will assume it worked. We will need to put the custom rom on the external sd card. We make a full wipe. Then we will flash it.
3. Assuming everything went ok it should boot.
Sent from my GT-I9506 using Tapatalk
---------- Post added at 12:58 PM ---------- Previous post was at 12:44 PM ----------
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.41.6-n7100.tar.md5
http://goo.im/devs/OpenRecovery/t03g/openrecovery-twrp-2.7.0.2-t03g.zip
http://omegadroid.co/samsung-galaxy-note-2-n7100/
These are the links.
What you will do as follows. Do every step to ensure it flashed.
1. Flash the cwm.tar.md5 ( first link) in the AP in odin, make sure auto reboot UNCHECKED.
2. After it finish you yourself will disconnect note 2 from pc and force it into recovery mode by pressing vol up+ home+ power button.
2. If it booted into recovery fine. You will then get a microsd card put on it the second file from second link. Twrp.zip.
3. Choose install zip in recovery and flash the twrp.zip. when done. Choose to reboot to recovery from advanced I guess.
4. The twrp is easier thats y I recommend it. Firsly download the 4.3 omega rom to microsd card then put it in note 2.
5. Choose wipe. Advanced wipe. Then select all exept the microsd card and otg.
6. Press home.
7. Choose install then browse the custom rom.
8. You have aroma. Just read and choose what u want.
9. Finish and then check if boots.
I hope ive helped.
Sent from my GT-I9506 using Tapatalk

mezo91 said:
Is your device still under warranty?
Do you use knox container or will use it?
If no, then I recommend you flash a custom recovery as stated, download a custom rom, choose one which is as close to stock as possible, I recommend omega rom it is closest to stock. And try to see if it boots.
Can you do that by yourself?
If not, send me a private message and I can help you from there and send you links in order your devoce to boot and be working again.
Or I can say here anyway. But I will tell you to choose the same recovery I use and send you links for it.
Sent from my GT-I9506 using Tapatalk
---------- Post added at 12:44 PM ---------- Previous post was at 12:38 PM ----------
If you plan to get a new phone and throw this one bcuz dead then follow this I will give all links at bottom. Lets try boot this note 2 up^^
1. Download twrp recovery, download the tar.md5 file. In their download links there is no tar.md5. So we will flash a cwm recovery bcuz it is .tar.md5. Then through cwm we will flash twrp.zip recovery.
Why I need .tar.md5.? Bcuz we need first to flash through odin.
2. After custom recovery is setup and I will assume it worked. We will need to put the custom rom on the external sd card. We make a full wipe. Then we will flash it.
3. Assuming everything went ok it should boot.
Sent from my GT-I9506 using Tapatalk
---------- Post added at 12:58 PM ---------- Previous post was at 12:44 PM ----------
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.41.6-n7100.tar.md5
http://goo.im/devs/OpenRecovery/t03g/openrecovery-twrp-2.7.0.2-t03g.zip
http://omegadroid.co/samsung-galaxy-note-2-n7100/
These are the links.
What you will do as follows. Do every step to ensure it flashed.
1. Flash the cwm.tar.md5 ( first link) in the AP in odin, make sure auto reboot UNCHECKED.
2. After it finish you yourself will disconnect note 2 from pc and force it into recovery mode by pressing vol up+ home+ power button.
2. If it booted into recovery fine. You will then get a microsd card put on it the second file from second link. Twrp.zip.
3. Choose install zip in recovery and flash the twrp.zip. when done. Choose to reboot to recovery from advanced I guess.
4. The twrp is easier thats y I recommend it. Firsly download the 4.3 omega rom to microsd card then put it in note 2.
5. Choose wipe. Advanced wipe. Then select all exept the microsd card and otg.
6. Press home.
7. Choose install then browse the custom rom.
8. You have aroma. Just read and choose what u want.
9. Finish and then check if boots.
I hope ive helped.
Sent from my GT-I9506 using Tapatalk
Click to expand...
Click to collapse
Hi mezo91
I really appreciate you taking the time and helping me out.
I can't seem to get past the first step as when I try to flash, it always 'fails'.
Any advice?
I hope this isn't the end of my Note II

Bllyann said:
Hi mezo91
I really appreciate you taking the time and helping me out.
I can't seem to get past the first step as when I try to flash, it always 'fails'.
Any advice?
I hope this isn't the end of my Note II
Click to expand...
Click to collapse
Try to boot to recovery after it fails. When flash bar reaches end and says fail. Disconnect device and turn it off. Then boot to recovery.
Sent from my GT-I9506 using Tapatalk
---------- Post added at 02:07 PM ---------- Previous post was at 02:07 PM ----------
We only need recovery to work.
Sent from my GT-I9506 using Tapatalk

mezo91 said:
Try to boot to recovery after it fails. When flash bar reaches end and says fail. Disconnect device and turn it off. Then boot to recovery.
Sent from my GT-I9506 using Tapatalk
---------- Post added at 02:07 PM ---------- Previous post was at 02:07 PM ----------
We only need recovery to work.
Sent from my GT-I9506 using Tapatalk
Click to expand...
Click to collapse
I tried what you instructed me to do, but it seems that it is still making it's way to the stock Android system recovery when I boot to recovery after a 'fail' flash<3e>
Anything else I can try?

Bllyann said:
I tried what you instructed me to do, but it seems that it is still making it's way to the stock Android system recovery when I boot to recovery after a 'fail' flash<3e>
Anything else I can try?
Click to expand...
Click to collapse
Did you force boot into recovery? Bcuz sometimes the stock recovery reflashes itself when booted normally.
What I do is when recovery flash complete is remove battery then vol up home and power button.
Try it.
Sent from my GT-I9506 using Tapatalk

[Q] M8 Stuck in Bootloader

Ok I had Android Revolution HD 10.1 installed .. everythings been working great for the last few days.. I get home and my phone resets and freezes at the HTC ONE screen..
I held Power+up it reset now it'll only boot to the Bootloader menu..
I've got the RUU.exe but it reboots phone but then Fails..
I've tried to do a Radio update via sdcard and fastboot.. both fail?
I got Fail-PU when I tried to do the SDcard update
Any Idea?
I noice in Bootloader it states
RADIO-INVALID_VER_INFO
OpenDSP-INVALID_VER_INFO

Crazywhitie said:
Ok I had Android Revolution HD 10.1 installed .. everythings been working great for the last few days.. I get home and my phone resets and freezes at the HTC ONE screen..
I held Power+up it reset now it'll only boot to the Bootloader menu..
I've got the RUU.exe but it reboots phone but then Fails..
I've tried to do a Radio update via sdcard and fastboot.. both fail?
I got Fail-PU when I tried to do the SDcard update
Any Idea?
I noice in Bootloader it states
RADIO-INVALID_VER_INFO
OpenDSP-INVALID_VER_INFO
Click to expand...
Click to collapse
What recovery have u got installed?
best way maybe to reflash recovery and follow the soft brick guide in my sig

exocetdj said:
What recovery have u got installed?
best way maybe to reflash recovery and follow the soft brick guide in my sig
Click to expand...
Click to collapse
I had TWRP
Thx I'll check you guide once home. But I know it wouldn't let me into recovery

Crazywhitie said:
I had TWRP
Thx I'll check you guide once home. But I know it wouldn't let me into recovery
Click to expand...
Click to collapse
Try reflashing TWRP and then "fastboot erase cache" reboot boot loader and try recovery then

exocetdj said:
Try reflashing TWRP and then "fastboot erase cache" reboot boot loader and try recovery then
Click to expand...
Click to collapse
Ok I'll try this once home. Thx

exocetdj said:
Try reflashing TWRP and then "fastboot erase cache" reboot boot loader and try recovery then
Click to expand...
Click to collapse
Ok I get this when trying to flash recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Crazywhitie said:
Ok I get this when trying to flash recovery
Click to expand...
Click to collapse
Ouch, i'm not quite sure what to suggest. Have you got a dedicated ADB/Fastboot folder? i.e on my laptop its c:/fastboot
---------- Post added at 10:52 AM ---------- Previous post was at 10:51 AM ----------
You could always try on a different PC if you have access to one

exocetdj said:
Ouch, i'm not quite sure what to suggest. Have you got a dedicated ADB/Fastboot folder? i.e on my laptop its c:/fastboot
---------- Post added at 10:52 AM ---------- Previous post was at 10:51 AM ----------
You could always try on a different PC if you have access to one
Click to expand...
Click to collapse
yes but I get the same error.. .. I'll just get tmobile the replace it...
thanks for your help....

Crazywhitie said:
yes but I get the same error.. .. I'll just get tmobile the replace it...
thanks for your help....
Click to expand...
Click to collapse
ok no worries man, sorry I couldn't help you, hopefully Tmobile will replace without any Bull :good:

Crazywhitie said:
yes but I get the same error.. .. I'll just get tmobile the replace it...
thanks for your help....
Click to expand...
Click to collapse
hold fire on that, have u unlocked your bootloader? seems this is required even if s off
see here
unlock ur bootloader and u should be able to flash recovery and set out where u left off

exocetdj said:
hold fire on that, have u unlocked your bootloader? seems this is required even if s off
see here
unlock ur bootloader and u should be able to flash recovery and set out where u left off
Click to expand...
Click to collapse
Yes. It's unlocked. Should I try it again
Edit .. Redid unlock... even though it says unlock at the top still same ****.. I told Tmobile it happed with the 4.4.3 update so they are sending one lol

Can't get it back to stock :(

hello i bought one s6 edge plus from tmobile,it is rooted,when i try to flash it like i always do with odin,it will flash ,will complete the proccess but wont pass the s6 edge plus screen,if i flash the kernel to root it ,will load normally but i want it 100% stock,
any ideas??please help and thanks for any info.

re: odin flash - stuck on S6 screen
darkthugs said:
hello i bought one s6 edge plus from tmobile,it is rooted,when i try to flash it like i always do with odin,it will flash ,will complete the proccess but wont pass the s6 edge plus screen,if i flash the kernel to root it ,will load normally but i want it 100% stock,
any ideas??please help and thanks for any info.
Click to expand...
Click to collapse
Go into recovery and do a "factory reset" and a full wipe then
put the phone into download mode and Odin flash the proper
firmware for your S6 Edge+ phone.
Be sure you odin flash the S6 Edge+ G928T official stock firmware.
Good luck,
Have a great day!

Misterjunky said:
Go into recovery and do a "factory reset" and a full wipe then
put the phone into download mode and Odin flash the proper
firmware for your S6 Edge+ phone.
Be sure you odin flash the S6 Edge+ G928T official stock firmware.
Good luck,
Have a great day!
Click to expand...
Click to collapse
thanks for the fast response,but i have made it and it continues booting up with super su :/

darkthugs said:
thanks for the fast response,but i have made it and it continues booting up with super su :/
Click to expand...
Click to collapse
Open supersu in your app drawer and in its settings disable it.
Then Uninstall supersu.
Sent from my SM-G928T using Tapatalk

thanks for the answers but it booting up correctly,i stopped the supersu app and then removed it from the phone,realized one factory reset,manually and also cache partition.
it aint letting me flash the original firmware,well it does but i get stuck on the boot screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

the pics arent showing up
http://imgur.com/a/W6yBE
i downloaded the latest os firmware COJ5
and when i plug it via odin it will show as current bynary and system status as custom

I found this problem in most of Samsung device it won't wipe fully,when we flash it will load the existing data along with this,to make a clean install of your firmware,first go to recovery (other recovery is recommend other than stock)
then make sure to wipe all the contents in recovery including data and cache,then flash firmware now your problem solved.
warning!!!!! back up all your data before proceeding.
Sent from my C2105 using XDA Free mobile app
---------- Post added at 08:42 PM ---------- Previous post was at 08:35 PM ----------
whether you downloaded correct firmware?
your pictures shows network lock,it can be unlocked
visit this link http://m.androidcentral.com/t-mobile-releases-sim-unlock-app-one-device-only-so-far

I will try it later ,do you recommend one specific file to flash ??and thanks for the reply

Unfortunately I can't suggest the exact file better go to Samsung website and there you can get exact link based on your country and network.
Keep calm and do your work,most of the time we make minor mistakes during this,good luck

hello i dont have problem with my data i can delete it,but i flashed twrp,performed factory wipe,even system,flashed the latest os ,and continues without booting completely,stuck on s6 edge plus logo

Try philz-touch recovery. It's like cwm but I think it has more functions. Go to fresh install or something to that extent. Then format all your data partitions. Reboot it into download mode and try flashing it again. Unchecked restart in Odin press vol-, home and power then it will reboot. While still in the Samsung screen press vol+, home. Go into recovery and factory reset. Then reboot normal. It works for me all the time. Good luck.

lildoggs said:
Try philz-touch recovery. It's like cwm but I think it has more functions. Go to fresh install or something to that extent. Then format all your data partitions. Reboot it into download mode and try flashing it again. Unchecked restart in Odin press vol-, home and power then it will reboot. While still in the Samsung screen press vol+, home. Go into recovery and factory reset. Then reboot normal. It works for me all the time. Good luck.
Click to expand...
Click to collapse
thanks for the reply,i just made it right now but it aint working anyway ,other idea??

1)

Installing TWRP after CFAutoRoot?

Hello.
Well I am new to android rooting. I switched over to a Galaxy s6 from apple iPhone.
Ive recently rooted my galaxy (6.0.1 SM-g920p) with CF autoroot. I am attempting to install TWRP recovery, but end up in a bootloop everytime. The error says: RECOVERY IS NOT SEANDROID ENFORCED. Ive gotten out of the bootloop and am back in my phone.
The question is: How do I install TWRP and Xposed without causing another bootloop?
Any help would be greatly appreciated.
Regards.

I had the same problem. Reflash CF auro root to fix your phone. I never got TWRP to work.

Hey,
Yeah ive already gotten myself out of the loop. Im stuck on installing TWRP and xposed.

Clear cache in stock recovery after cfauto wait for that if u havnt seen anything after flash wait.
---------- Post added at 09:11 PM ---------- Previous post was at 09:10 PM ----------
Or just odin twrpis a better bet 3.0.0-1 over stock

Jimmy1life said:
Clear cache in stock recovery after cfauto wait for that if u havnt seen anything after flash wait.
---------- Post added at 09:11 PM ---------- Previous post was at 09:10 PM ----------
Or just odin twrpis a better bet 3.0.0-1 over stock
Click to expand...
Click to collapse
Kind of confusing. Could you possibly reword it ?

Sure sorry trying to multitask and help lol. We only used cfauto at the very biggening of the MM update soon as twrp was released in a odin flashable zip or img we no longer need cfauto. Im gonna look for the link to the right twrp its 3.0.0-1 there is newer versions but none have worked. Flash it then once in twrp you are golden
But make sure oem lock is of in settings menu.
---------- Post added at 09:56 PM ---------- Previous post was at 09:40 PM ----------
For sure i tried twrp 3.0.0.2 from official twrp site didnt work. that was the other day but i did find the right one maybe down load the one I think its 3.0.1 but when installed itl say 3.0.0-1. Once i get out work i will check the exact file i downloaded and worked and find the source of it. Its on my computer.

Jimmy1life said:
Sure sorry trying to multitask and help lol. We only used cfauto at the very biggening of the MM update soon as twrp was released in a odin flashable zip or img we no longer need cfauto. Im gonna look for the link to the right twrp its 3.0.0-1 there is newer versions but none have worked. Flash it then once in twrp you are golden
But make sure oem lock is of in settings menu.
---------- Post added at 09:56 PM ---------- Previous post was at 09:40 PM ----------
For sure i tried twrp 3.0.0.2 from official twrp site didnt work. that was the other day but i did find the right one maybe down load the one I think its 3.0.1 but when installed itl say 3.0.0-1. Once i get out work i will check the exact file i downloaded and worked and find the source of it. Its on my computer.
Click to expand...
Click to collapse
Even if I do still have CFAutoRoot on MM, I will still be able to flash TWRP correct?
I tried flashing the newest one (3.0.2 TWRP) and got my phone into another bootloop But I reflashed CFAuto and fixed it.

https://dl.twrp.me/zerofltespr/twrp-3.0.1-0-zerofltespr.img.tar.html
this is odinable twrp3.0.0.1 yes u are fine unless you run into data issues but i used cfauto root for weeks no problems.

Jimmy1life said:
https://dl.twrp.me/zerofltespr/twrp-3.0.1-0-zerofltespr.img.tar.html
this is odinable twrp3.0.0.1 yes u are fine unless you run into data issues but i used cfauto root for weeks no problems.
Click to expand...
Click to collapse
Flashed this file and phone went into the same bootloop. It just says "RECOVERY IS NOT SEANDROID ENFORCING" in the top left hand corner.
I believe it could be a result from using the AP button when inside of the Odin app? Am I supposed to use BL or AP?

Yes AP but unchrck reboot and hold down home power to exit and quickly soon as light blinks off manully hold up +home +power after it days pass to enter twrp if it restarts by odin it wont boot.

Sorry man we might need professional help. Think some people just have problems flashing stuff. I just follow directions. SO RETRY follow the steps they work in the main threads.

Jimmy1life said:
Yes AP but unchrck reboot and hold down home power to exit and quickly soon as light blinks off manully hold up +home +power after it days pass to enter twrp if it restarts by odin it wont boot.
Click to expand...
Click to collapse
I did everything step by step, but my phone still goes into the wierd bootloop.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

https://dl.twrp.me/zerofltespr/twrp-3.0.1-0-zerofltespr.img.tar.html. My last effort this twrp is from the 3.0.0-1 thread. flash in Odin.
---------- Post added at 11:20 AM ---------- Previous post was at 11:19 AM ----------
Wait longer when u see recovery isnt enforcing like 4 minutes. manually reboot it into recovery.

Anyone else who can help? My Odin says success but my phone simply wont boot into twrp recovery - as it doesnt even exist. It just sits on the bootlogo. Ive tried forcing it into recovery but nothing works.

try re-instaling twrp via Odin again. Then flash the SuperSU.Zip in twrp to get root.
Edit: just realized @Jimmy1life linked you the wrong twrp.
This one should work
https://dl.twrp.me/zerofltespr/twrp-3.0.0-0-zerofltespr.img.tar.html

Yea its confusing with ones on official site up but not working. Gamepro i tried man. I need to wake be getting on here when im still sleeping. Some of post are not clean and straight forward working on it though. Thanks Good luck with TWRP.

gamepro602 said:
try re-instaling twrp via Odin again. Then flash the SuperSU.Zip in twrp to get root.
Edit: just realized @Jimmy1life linked you the wrong twrp.
This one should work
https://dl.twrp.me/zerofltespr/twrp-3.0.0-0-zerofltespr.img.tar.html
Click to expand...
Click to collapse
Nope 3.0.0 didn't work.
After flashing it via Odin, my phone just sits on the Samsung Galaxy s6 boot screen. Won't go into recovery. @gamepro602

Ok, just Odin back to stock to fix the recovey (backup everything first). Then flash the twrp.
Also make sure you uncheck the auto reboot option in Odin before you flash.