hello i bought one s6 edge plus from tmobile,it is rooted,when i try to flash it like i always do with odin,it will flash ,will complete the proccess but wont pass the s6 edge plus screen,if i flash the kernel to root it ,will load normally but i want it 100% stock,
any ideas??please help and thanks for any info.
re: odin flash - stuck on S6 screen
darkthugs said:
hello i bought one s6 edge plus from tmobile,it is rooted,when i try to flash it like i always do with odin,it will flash ,will complete the proccess but wont pass the s6 edge plus screen,if i flash the kernel to root it ,will load normally but i want it 100% stock,
any ideas??please help and thanks for any info.
Click to expand...
Click to collapse
Go into recovery and do a "factory reset" and a full wipe then
put the phone into download mode and Odin flash the proper
firmware for your S6 Edge+ phone.
Be sure you odin flash the S6 Edge+ G928T official stock firmware.
Good luck,
Have a great day!
Misterjunky said:
Go into recovery and do a "factory reset" and a full wipe then
put the phone into download mode and Odin flash the proper
firmware for your S6 Edge+ phone.
Be sure you odin flash the S6 Edge+ G928T official stock firmware.
Good luck,
Have a great day!
Click to expand...
Click to collapse
thanks for the fast response,but i have made it and it continues booting up with super su :/
darkthugs said:
thanks for the fast response,but i have made it and it continues booting up with super su :/
Click to expand...
Click to collapse
Open supersu in your app drawer and in its settings disable it.
Then Uninstall supersu.
Sent from my SM-G928T using Tapatalk
thanks for the answers but it booting up correctly,i stopped the supersu app and then removed it from the phone,realized one factory reset,manually and also cache partition.
it aint letting me flash the original firmware,well it does but i get stuck on the boot screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the pics arent showing up
http://imgur.com/a/W6yBE
i downloaded the latest os firmware COJ5
and when i plug it via odin it will show as current bynary and system status as custom
I found this problem in most of Samsung device it won't wipe fully,when we flash it will load the existing data along with this,to make a clean install of your firmware,first go to recovery (other recovery is recommend other than stock)
then make sure to wipe all the contents in recovery including data and cache,then flash firmware now your problem solved.
warning!!!!! back up all your data before proceeding.
Sent from my C2105 using XDA Free mobile app
---------- Post added at 08:42 PM ---------- Previous post was at 08:35 PM ----------
whether you downloaded correct firmware?
your pictures shows network lock,it can be unlocked
visit this link http://m.androidcentral.com/t-mobile-releases-sim-unlock-app-one-device-only-so-far
I will try it later ,do you recommend one specific file to flash ??and thanks for the reply
Unfortunately I can't suggest the exact file better go to Samsung website and there you can get exact link based on your country and network.
Keep calm and do your work,most of the time we make minor mistakes during this,good luck
hello i dont have problem with my data i can delete it,but i flashed twrp,performed factory wipe,even system,flashed the latest os ,and continues without booting completely,stuck on s6 edge plus logo
Try philz-touch recovery. It's like cwm but I think it has more functions. Go to fresh install or something to that extent. Then format all your data partitions. Reboot it into download mode and try flashing it again. Unchecked restart in Odin press vol-, home and power then it will reboot. While still in the Samsung screen press vol+, home. Go into recovery and factory reset. Then reboot normal. It works for me all the time. Good luck.
lildoggs said:
Try philz-touch recovery. It's like cwm but I think it has more functions. Go to fresh install or something to that extent. Then format all your data partitions. Reboot it into download mode and try flashing it again. Unchecked restart in Odin press vol-, home and power then it will reboot. While still in the Samsung screen press vol+, home. Go into recovery and factory reset. Then reboot normal. It works for me all the time. Good luck.
Click to expand...
Click to collapse
thanks for the reply,i just made it right now but it aint working anyway ,other idea??
1)
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ClockworkMod Recovery for the Samsung Epic Touch 4G
Mad Props
Thanks to everybody involved with the original rooted kernel, including zedomax and shabbypenguin as well as tanimn.
Also a big shout out to AbsolutZeroGI, my hommie WR47H, and fordmanck.
Here we go...
This is a recovery tar file to be flashed with Odin. It will give you Clockwork Mod Recovery on your Epic Touch 4G. *NO data will be wiped! you are going to need kies for drivers. Download that here.
1. Download Odin 1.85
2. Download the flash-able recovery tar from the link below.
3. Extract Odin somewhere on your PC.
4. Open Odin3 V1.85 and on the left side ONLY have AUTO reboot checked (VERY IMPORTANT)
6. Check the PDA slot and then press the PDA button and navigate to the Tar file and select it
7. Now power off your Epic Touch.
8. Once fully powered off, press and hold volume down, home key, and power button at the SAME time.*This will take you into Odin mode.
9. Plug your phone into your PC.
10. You should see COM# (the number doesn't matter) in the ID:COM box
11. Press start and let it run through the process!*
12. You now have clockwork mod as your recovery!
Downloads
acs-eb30-clockwork-epic-touch-4g-sep-20-4-00-pm.tar (6.33 MB)
Now if you would like to also have root just download this and flash it in clockwork recovery.
Please do not post any mirrors without the permission of myself or others on the ACS team.
Here is a youtube video explaining the process.
Awesome
Sent from my SPH-D710 using XDA App
F$#@ Yeah!
I am already rooted will this still work? i like the root i have now from the other thread?
broke root!!!!!!, thanx...also if i could get the regular galaxy sII startup screen back that would be nice. Thanks.
So we still need the pit file to flash this recovery? Or can we just use the tar file in odin and we're okay?
Damn, things are happening fast! Many thanks
Sent from my SPH-D710 using xda premium
Again ill ask i already have root from the other thread would i still do all this again even though i already have root?
You can flash this over the previously released tar that gave everyone root, and the pit is not needed, so you should be fine.
How do I test that it worked?
not working, flashed this file, broke root,now cmw what so ever
kpkimmel said:
not working, flashed this file, broke root, reflashed zedomax kernal and cmw went away...so...
Click to expand...
Click to collapse
Same thing happened to me, although I'm not even certain clockwork was even on my phone (not sure how to enter recovery).
kpkimmel said:
not working, flashed this file, broke root,now cmw what so ever
Click to expand...
Click to collapse
Confirmed....same result here
Beejis said:
Same thing happened to me, although I'm not even certain clockwork was even on my phone (not sure how to enter recovery).
Click to expand...
Click to collapse
its doesn't flash a recovery at all, just breaks root...i'll keep the kernal file though for returnign to stock
gonna wait till more clear instructions for those that already rooted...
thanks for this though OP...can you provide further instructions though?
Beejis said:
Same thing happened to me, although I'm not even certain clockwork was even on my phone (not sure how to enter recovery).
Click to expand...
Click to collapse
So we shouldn't flash this yet then?
Sorry guys, seems like it does break root. Please hold off. Reuploading soon.
plmiller0905 said:
So we shouldn't flash this yet then?
Click to expand...
Click to collapse
I wouldn't yet until it is confirmed to work.
plmiller0905 said:
So we shouldn't flash this yet theD
DON'T FLASH THIS, THESE INSTRUCTION SAY EPIC 4G PIT, AND THE ONES ON THE WEBSITE SAY VICTORY PIT, SO I DID THE VICTORY PIT AND IT HARD BRICKED MY PHONE!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
tried it and root check tells me I don't have root
Hello,recently I did root my S3 L710 (Sprint) following this tutorial [HOW TO] Easiest Root and Recovery: SGS3 LTE Sprint, T-Mobile, AT&T, Rogers and was successful and the first thing I wanted to do was a backup with TWRP, install it with GooManager, and did the combination (Volume Up + Center Home + Power button) for 5 seconds, but I appeared the stock recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
According to what I read, you must do the following:
Removes /system/etc/install-recovery.sh and /system/recovery-from-boot.p left by OTA updates in order to preserve stock recovery. Read the CWM instructions carefully!
Click to expand...
Click to collapse
But seeing that these files are in the system, I'm afraid that if I delete it, the S3 also problems.
I would like to know if it is safe to remove them? whether, if so, the TWRP recovery will become the default?
Thanks!
That picture you posted is TWRP custom recovery? I don't understand what's wrong.
Sent from the future via Tapatalk 4
edfunkycold said:
That picture you posted is TWRP custom recovery? I don't understand what's wrong.
Click to expand...
Click to collapse
The picture is only sample, not my S3, so it has better features than the Clockwork, which I would like to know is, if i need to remove these files so that I leave the TWRP?
kevinrealk said:
The picture is only sample, not my S3, so it has better features than the Clockwork, which I would like to know is, if i need to remove these files so that I leave the TWRP?
Click to expand...
Click to collapse
You can flash TWRP right over CWM or visa versa makes no difference. Cnexus has a set up in which you can have both and switch between which ever you want to use. But it makes no difference which ever you prefer. I personally think CWM works better on my S3 but I use TWRP on my Gnexus because it works better on that device. Let me see if I can find and link @CNexus thread for the switching recovery. And no you do not have to remove any files.
Sent from the future via Tapatalk 4
Flash the Team-Epic-root_from_recovery.zip and it will rename those files so that they cannot do any harm (the zip is somewhere here, just search).
As for my recovery switcher, its right here.
CNexus said:
Flash the Team-Epic-root_from_recovery.zip and it will rename those files so that they cannot do any harm (the zip is somewhere here, just search).
Click to expand...
Click to collapse
I understand, installing the zip file whit Odin3, it automatically turns on the recovery TWRP by default.
In closing, I install TWRP with GooManager, but if I do it with the zip through Odin3, overwrite?
kevinrealk said:
I understand, installing the zip file whit Odin3, it automatically turns on the recovery TWRP by default.
In closing, I install TWRP with GooManager, but if I do it with the zip through Odin3, overwrite?
Click to expand...
Click to collapse
No....you're misunderstanding, do the following.
Power off your device
Boot into download mode
Flash any recovery (you can switch later) through ODIN (it should be a .tar.md5 file)
Pull the battery (DO NOT REBOOT, PULL THE BATTERY)
Boot into recovery from powered off
Flash the Team_Epic_Root_From_Recovery.zip through recovery
The stock recovery will now stop replacing your custom recovery. You can now flash another recovery if you want to.
The TeamEpic.zip file gets flashed through recovery, not ODIN.
CNexus said:
No....you're misunderstanding, do the following.
Power off your device
Boot into download mode
Flash any recovery (you can switch later) through ODIN (it should be a .tar.md5 file)
Pull the battery (DO NOT REBOOT, PULL THE BATTERY)
Boot into recovery from powered off
Flash the Team_Epic_Root_From_Recovery.zip through recovery
The stock recovery will now stop replacing your custom recovery. You can now flash another recovery if you want to.
The TeamEpic.zip file gets flashed through recovery, not ODIN.
Click to expand...
Click to collapse
Hi, I already made the process more or less:
- I put the CWR of this package GalaxyS3RootUSCanada.zip with ODIN
- When I was in CWR, Flash the Team_Epic_Root_From_Recovery.zip
- Went well, I emerged a problem:
By making the combination Volume Up and Center Home buttons, I went the CWR, when I want to backup or Reboot system now, just lay on the logo, forcing me to remove the battery.
That there will be happened?
* Edit: I went back to install the TWRP from GooManager, replacing the CWR, and TWRP recovery is the default
Thank you very much for the help!.:victory:
I've updated my phone from 4.1.2 into 4.2.2 via OTA and successful. The problem is after updated the phone is very slow and I'd like to reset. I try to press Volume Up + Home + Power but I can't enter recovery mode menu instead NO COMMAND picture.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Help me please.
alid_abdul said:
I've updated my phone from 4.2.1 into 4.2.2 via OTA and successful. The problem is after updated the phone is very slow and I'd like to reset. I try to press Volume Up + Home + Power but I can't enter recovery mode menu instead NO COMMAND picture.
Help me please.
Click to expand...
Click to collapse
The No command is generated when you don't flash Fix-Recovery.zip after you flash your first custom recovery over samsung's
Take the recovery .tar file from here according to firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Follow the steps in this post : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
alid_abdul said:
I've updated my phone from 4.2.1 into 4.2.2 via OTA and successful. The problem is after updated the phone is very slow and I'd like to reset. I try to press Volume Up + Home + Power but I can't enter recovery mode menu instead NO COMMAND picture.
Help me please.
Click to expand...
Click to collapse
Flash CWM and then reboot recovery by pull out battery-insert it-volume up+home+power
NOTE: it will disable ota update and replace your recovery. If you want to enable Ota update, use Wanam Xposed
Sent from my GT-I9082 using Tapatalk
iceyhotguy said:
The No command is generated when you don't flash Fix-Recovery.zip after you flash your first custom recovery over samsung's
Take the recovery .tar file from here according to firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Follow the steps in this post : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
Click to expand...
Click to collapse
black87 said:
Flash CWM and then reboot recovery by pull out battery-insert it-volume up+home+power
NOTE: it will disable ota update and replace your recovery. If you want to enable Ota update, use Wanam Xposed
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Actually my phone still using stock ROM, haven't flashing using other ROM so far
alid_abdul said:
Actually my phone still using stock ROM, haven't flashing using other ROM so far
Click to expand...
Click to collapse
If there 4.2.1 for grand duos (just kidding)
Sent from my GT-I9082 using Tapatalk
black87 said:
If there 4.2.1 for grand duos (just kidding)
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Oooppss sorry misstype -____-
4.1.2 not 4.2.1 hehehe
alid_abdul said:
Actually my phone still using stock ROM, haven't flashing using other ROM so far
Click to expand...
Click to collapse
If you mean is revert from 4.2->4.1, you need to download from sammobile.com . and flash it with ODIN, make sure the country code is correct.
Be careful when flashing with Odin, its more safe if you flashing on your laptop, because the phone will HARDBRICKED if your usb accidentialy removed or electricity unstable.
If phone goes bootloop, wipe data and cache
Sent from my GT-I9082 using Tapatalk
alid_abdul said:
Actually my phone still using stock ROM, haven't flashing using other ROM so far
Click to expand...
Click to collapse
Doesn't matter if you are on stock or custom ROM, if you want your phone rooted, the process of installing CWM is the same as I mentioned above.
Thanks all,
It solved with weird way, press the vol up+home+power and appear no command, and I just wait around 7-10 minutes then recovery menu appear. Weird -__-
no command nt even rooted
iceyhotguy said:
The No command is generated when you don't flash Fix-Recovery.zip after you flash your first custom recovery over samsung's
Take the recovery .tar file from here according to firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Follow the steps in this post : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
Click to expand...
Click to collapse
hello sir,
i tried to root my phone by the method given by explore gadgets to root 4.4.2 running note 2...can't post the link being a new member..
after i flashed twrp recovery using odin...to flash super user file i opened recovery mode..since then it's showing no command error...couldn't even flash the su file...nd i chked the emulator...it is showing the phone is not rooted.
plz tell me what happened and kindly resolve the issue too..thank you.
mansi0312 said:
hello sir,
i tried to root my phone by the method given by explore gadgets to root 4.4.2 running note 2...can't post the link being a new member..
after i flashed twrp recovery using odin...to flash super user file i opened recovery mode..since then it's showing no command error...couldn't even flash the su file...nd i chked the emulator...it is showing the phone is not rooted.
plz tell me what happened and kindly resolve the issue too..thank you.
Click to expand...
Click to collapse
I do not have a note 2 so I can't simply solve it for you.
You should head over to note 2 section of XDA and use the threads dedicated to showing how to root and troubleshooting problems.
Try this: http://forum.xda-developers.com/showthread.php?t=2730764
Good luck sir.
Helo sir my phone model Samsung galaxy grand neo in recovary mode says no command error and my recovery not working....help me to fix this problem and solved out.......mail my Gmail I'd. [email protected]
..
I wait your mail with your ans
hey XDA, I've got an M8 on Wind Mobile with clockworkmod and a stock ROM, and there's a system update I can't take without the stock recovery. I searched all over the place, but couldn't find the correct recovery. Can someone point me to the download or upload the stock recovery from their phone pretty please? The CID on this phone is GLOBA001. Bootloader unlocked, and S-ON.
Download OTA, select install later. Copy OTA zip from internal storage/Download to PC.
Open OTA zip with 7-zip, open firmware.zip, extract out recovery.img
Use this extracted recovery.img then continue OTA
Ninja'd......
ckpv5 said:
Download OTA, select install later. Copy OTA zip from internal storage/Download to PC.
Open OTA zip with 7-zip, open firmware.zip, extract out recovery.img
Use this extracted recovery.img then continue OTA
Click to expand...
Click to collapse
I'll give that a try, thanks
Hey, I downloaded the OTA but I cant find the file anywhere. I tried OTA snatcher, but nothing happens. I cant even find the file at all. I do have root. how else can I get the OTA onto my PC?
EDIT: Never mind I got it. flashed the recovery but its still not taking the update, it just hangs on the white htc screen. cant boot into the stock recovery at all.
Maybe I'll just start a new thread then...
There is no need for a new thread. Keep everything in one thread. So anyone willing to help you can easily find info on your problem.
Have you try press & hold both power and volume up button, when it goes black quickly release both buttons and press & hold volume down button. This will take youto hboot then select recovery and check whether stock recovery is properly installed.
ckpv5 said:
There is no need for a new thread. Keep everything in one thread. So anyone willing to help you can easily find info on your problem.
Have you try press & hold both power and volume up button, when it goes black quickly release both buttons and press & hold volume down button. This will take youto hboot then select recovery and check whether stock recovery is properly installed.
Click to expand...
Click to collapse
tried that many times. When I select recovery, it just hangs on the white htc screen forever, never booting into the recovery and I have to force reboot it. The only recovery that seems to boot is clockworkmod...
Just forget about entering the stock recovery for awhile as there is no reason for you to go in there except to check the error log when doing update.
After you installed the stock recovery (fastboot flash recovery recovery.img), reboot and do OTA again, download and select install ... what happen then ?
ckpv5 said:
Just forget about entering the stock recovery for awhile as there is no reason for you to go in there except to check the error log when doing update.
After you installed the stock recovery (fastboot flash recovery recovery.img), reboot and do OTA again, download and select install ... what happen then ?
Click to expand...
Click to collapse
Exactly the same thing...reboots, and just hangs on the white screen until I force reboot
bbmaster123 said:
Exactly the same thing...reboots, and just hangs on the white screen until I force reboot
Click to expand...
Click to collapse
Then it boot back to your old version without OTA updating ?
What's your old version no. ?
I know WIND is a rare version around here, don't see any stock backup anywhere.
ckpv5 said:
Then it boot back to your old version without OTA updating ?
What's your old version no. ?
I know WIND is a rare version around here, don't see any stock backup anywhere.
Click to expand...
Click to collapse
Yes, then it boots back up normally into the old version, 4.4.2 and asks to apply the update again.
bbmaster123 said:
Yes, then it boots back up normally into the old version, 4.4.2 and asks to apply the update again.
Click to expand...
Click to collapse
I feel it's odd that it didn't go to recovery when you correctly installed a stock recovery. If the recovery image is wrong version, it still go to recovery and give error mark (the famous red triangle) but yours it just hang .. I run out of idea.
If you have time, maybe you can make a nandroid backup of boot & system (don't need data as it contains your data) and upload for me to have a look at it. Then I can rebuild the nandroid for others too. So far I don't see any Wind backup at all on XDA or anywhere on the internet. So it's up to you. If you do, you can put in dropbox or Drive and PM me the link.
ckpv5 said:
I feel it's odd that it didn't go to recovery when you correctly installed a stock recovery. If the recovery image is wrong version, it still go to recovery and give error mark (the famous red triangle) but yours it just hang .. I run out of idea.
If you have time, maybe you can make a nandroid backup of boot & system (don't need data as it contains your data) and upload for me to have a look at it. Then I can rebuild the nandroid for others too. So far I don't see any Wind backup at all on XDA or anywhere on the internet. So it's up to you. If you do, you can put in dropbox or Drive and PM me the link.
Click to expand...
Click to collapse
okay, I'll do that next time I have the phone (its actually my friend's and I'm helping him out). I'll post the link in this thread when I upload it.
bbmaster123 said:
okay, I'll do that next time I have the phone (its actually my friend's and I'm helping him out). I'll post the link in this thread when I upload it.
Click to expand...
Click to collapse
In case anyone wondering what happen to this case ....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
all files will be uploaded in a few days time.
Hi, this is my first time rooting a phone.
I was able to unlock, flash TWRP, install and root my phone with Magisk following this video from Munchy
Following that, I installed ArrowOS and wiped (Format Data) with TWRP, as per this video from Munchy again.
But then I noticed that on boot, my Magisk app stated N/A, so I assumed I had to reroot the phone again, so I followed this video but I think I flashed the wrong boot.img, and arrowOS was unable to detect Wi-Fi at all.
I then tried to use this to restore stock MIUI following this tutorial and now my phone is stuck on this screen as per my attached picture. Selecting any option here just brings me back to the same screen no matter what I try, can anyone help?
This is what MiFlash looks like as well after everything:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Platform tools:
Use the 8/13/21 version of MiFlash. I had issues with the newer versions. I zipped up the 8/13 version and uploaded it. You can download it here:
https://drive.google.com/open?id=1-...pdlf&[email protected]&usp=drive_fs
ajsmsg78 said:
Use the 8/13/21 version of MiFlash. I had issues with the newer versions. I zipped up the 8/13 version and uploaded it. You can download it here:
https://drive.google.com/open?id=1-UZgUFVCl3YBAxZBBtVYjpG2L-wOpdlf&[email protected]&usp=drive_fs
Click to expand...
Click to collapse
It says I need permission to access it, just sent in the request, any chance you're the one who can grant me permission?
aatkaw said:
It says I need permission to access it, just sent in the request, any chance you're the one who can grant me permission?
Click to expand...
Click to collapse
Sorry, fixed. You can download now. Also, in MiFlash go into Configuration and uncheck Read Back Verify if It's checked.
ajsmsg78 said:
Sorry, fixed. You can download now. Also, in MiFlash go into Configuration and uncheck Read Back Verify if It's checked.
Click to expand...
Click to collapse
I MANAGED TO FLASH IT, YOU SAVED MY PHONE DUDE THANKS!
If you don't mind, I'm trying to do the following:
-Root the Poco F3
-Flash ArrowOS
Is there a tutorial somewhere I can follow that can get me both of the above? I think I was able to root it successfully first, but flashing arrowos caused the issue of the post
You need to boot twrp in fastboot (fastboot boot twrp) then flash twrp once you're booted into twrp
ajsmsg78 said:
You need to boot twrp in fastboot (fastboot boot twrp) then flash twrp once you're booted into twrp
Click to expand...
Click to collapse
Is this the TWRP I need to flash for the Poco F3?
aatkaw said:
Is this the TWRP I need to flash for the Poco F3?
Click to expand...
Click to collapse
Flash this one. It's Orangefox recovery. Basically TWRP but better.
https://drive.google.com/open?id=1-...lZ82&[email protected]&usp=drive_fs
ajsmsg78 said:
Flash this one. It's Orangefox recovery. Basically TWRP but better.
https://drive.google.com/open?id=1-_EqlMUtJWDBJACR_V_vSu9NkCMzlZ82&[email protected]&usp=drive_fs
Click to expand...
Click to collapse
Need permissions XD
aatkaw said:
Need permissions XD
Click to expand...
Click to collapse
Done. It's not too often an Arnold helps another Arnold on XDA lol
Haha nice, ok I'm here now, what should I be pressing?
aatkaw said:
Haha nice, ok I'm here now, what should I be pressing?
Click to expand...
Click to collapse
Now you can flash whatever rom you want. Just make sure the "install recovery after flashing" or whatever it says is checked. It will automatically flash Orangefox after the ROM so it sticks. Make sure it is checked when you flash any rom. If the ROM doesn't come with Gapps you flash the ROM first, reboot recovery then flash Gapps then Magisk, then Format data (not wipe data, format data) then restart and you should be good to go.
I'm glad you got that flashing error sorted out. I still get shivers in my spine when I see that error...