Related
Hi, i read somewhere that i need to use the correct RUU to revert back to my stock rom htc one x. i kinda lost my nandroid backup.
is the RUU can be found in fastboot? if so, here are the details.
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.12.0000
CPLD-None
MICROP-None
RADIO-2.1204.135.20
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW secure boot: enabled
MODEM PATH: Off
June 28 2012, 11:31:28
here you'll find everything you need
Fastboot getvar version-main
Fastboot oem readcid
Will give you the info you need
hi, i know this thread was created last month.. sorry for bringing this up again, i didnt want to create a new one for the same purpose. also, i was busy from work so i didnt had time to work on this. now ive got my hands full on this to work..
c:\android>fastboot getvar version-main
version-main: 2.17.707.3
finished. total time: 0.007s
c:\android>fastboot oem readcid
...
(bootloader) DEBUG: cid: HTC__044
OKAY [ 0.013s]
finished. total time: 0.013s
these are the info on my phone, can someone kindly direct me to the correct RUU? there are tons out there and im afraid that i might get the wrong.
if you need other info, just let me know.
thanks
http://bugsylawson.com/index.php/fi...73-radio-2120413520-release-278245-signedexe/
Firstly lock the bootloader, "fastboot oem lock"
Then right click the RUU and select "run as administrator"
TToivanen said:
http://bugsylawson.com/index.php/fi...73-radio-2120413520-release-278245-signedexe/
Firstly lock the bootloader, "fastboot oem lock"
Then right click the RUU and select "run as administrator"
Click to expand...
Click to collapse
thanks for this i managed to bring back the original ROM.
also just want to give background info. on this..
after I bring back Sense ROM in this unit, i will be surrendering it to HTC center because the LCD was broken and need of replacement.
last month i brought it there and they were charging me a couple of hundred dollars on top of the LCD replacement, due to the reason im using a different kind of ROM and such..
How can i guarantee that the ROM im using is a legit one and so i wont be questioned by them anymore and just replace the screen?
I checked the software info on my phone now, and it displays:
Android Version: 4.0.4
HTC sense version: 4.1
Software Number: 2.17.707.3
HTC SDK API level: 4.23
HTC extension version: HTCExtension_403_1_GA_20
i hope this can be any of help to you
If you run the ruu succesfully its full stock. You can't run another ruu then the one that is released for your phone with your software number ! Don't worry about that.
The only thing that they will see is the relocked bootloader, they always know its been unlocked before. That's all.
They can make a problem of that, because in certain cases unlocking means no more warranty
how to get RUU - i need it to revert back to stock ROM
how to get RUU - i need it to revert back to stock ROM
my device
endeavoru pvt ship s-on rl
hboot-0.94.0000
cpld-none
MICROP-NONE
RADIO-2.1204.135.20
eMMC-BOOTMODE : DISABLE
CPU -bootable : disable
HW secure boot : enable
modem path ff
apr 11 2012 ,02,27,11
IME : 359188044706349
SN : HT242W100676
MB: 419G223826444
please help me
:crying::crying::crying:
zqutli said:
how to get RUU - i need it to revert back to stock ROM
my device
endeavoru pvt ship s-on rl
hboot-0.94.0000
cpld-none
MICROP-NONE
RADIO-2.1204.135.20
eMMC-BOOTMODE : DISABLE
CPU -bootable : disable
HW secure boot : enable
modem path ff
apr 11 2012 ,02,27,11
IME : 359188044706349
SN : HT242W100676
MB: 419G223826444
please help me
:crying::crying::crying:
Click to expand...
Click to collapse
First delete your IMEI and S/N. Second post the result from command fastboot getvar all and again delete your IMEI and S/N.
What CID are you what is your main version?
the result : waiting for device
Thant said:
First delete your IMEI and S/N. Second post the result from command fastboot getvar all and again delete your IMEI and S/N.
What CID are you what is your main version?
Click to expand...
Click to collapse
My CID : htc_e11
When Ienter fastboot getvar all
the result : waiting for device
:crying::crying::crying:
zqutli said:
My CID : htc_e11
When Ienter fastboot getvar all
the result : waiting for device
:crying::crying::crying:
Click to expand...
Click to collapse
When you connect your phone to computer what are you see in device manager are you install the latest HTC drivers
Ah at least HTC E11 is dutch and a main 401
android ADB interface
Thant said:
When you connect your phone to computer what are you see in device manager are you install the latest HTC drivers
Click to expand...
Click to collapse
I see android ADB interface
Do you see a MYHTC ?
Getvar all
Thant said:
When you connect your phone to computer what are you see in device manager are you install the latest HTC drivers
Click to expand...
Click to collapse
version : 0.5a
version-baseband : 2.1204.135.20
version-microp: none
imei:
platform: HBOOT-T30S
cidnum:none
battery-voltage:3549mV
SECURITY: ON
COMMITNO-BOOTLOADER : NONE
DONE
First things first.......put the phone on charge ! Put it inside the recovery (tell us what recovery you have ?) Otherwise you get stuck with a drained battery soon !
Then try this :
Download the full android sdk bundle, unpack it and go to the platform tools folder. Open a command window there and type
Fastboot devices (with the phone in fastboot usb mode)
yes i see my htc
Mr Hofs said:
Do you see a MYHTC ?
Click to expand...
Click to collapse
yes i see my htc:good:
Oke now try it via the Android sdk package which i mentioned.
Hey guys , i need help here. I recently bought a ''second hand'' HTC ONE X and it was running fine. Until yesterday,, i tried to check for software update and 'software update' option is missing in my phone settings. I did some research and found out that my bootloader is unlocked and im using cwm recovery. Now i need help on unrooting my device and getting it back to stock rom. As is was on the first day of release. Is it possible ? Need guidance guys . Help is much appreciated . Thanks:good:
amuthan onex said:
Hey guys , i need help here. I recently bought a ''second hand'' HTC ONE X and it was running fine. Until yesterday,, i tried to check for software update and 'software update' option is missing in my phone settings. I did some research and found out that my bootloader is unlocked and im using cwm recovery. Now i need help on unrooting my device and getting it back to stock rom. As is was on the first day of release. Is it possible ? Need guidance guys . Help is much appreciated . Thanks:good:
Click to expand...
Click to collapse
If you are rooted, than you have ,,super user" or "super su" app, enter app, and look around, you''ll find unroot (or something like that) press button, and i think that that's it, for bootloader you must use fastboot, tupe command i think that tha command is fastboot oem relock.
Also you can find nandroid backup for your cid.
Forgot, on what android version are you ? 4.1.1 or 4.2.2 ?
If you are on 4.1.1 use method with ruu.
And last i think you can't but someone else will tell you, in fastboot tupe fastboot getvar all, copy everything except imei and serial number, so someone can tell you what ruu can you use.
Hope i helped.
He doesn't need to unroot the custom rom because he can't update with that anyway. And root is no issue to update at all.
And dont relock !!! You can't restore a nand with a relocked bootloader
one x
nikola016 said:
If you are rooted, than you have ,,super user" or "super su" app, enter app, and look around, you''ll find unroot (or something like that) press button, and i think that that's it, for bootloader you must use fastboot, tupe command i think that tha command is fastboot oem relock.
I went into bootloader and I have some info for you.
Also you can find nandroid backup for your cid.
Forgot, on what android version are you ? 4.1.1 or 4.2.2 ?
If you are on 4.1.1 use method with ruu.
And last i think you can't but someone else will tell you, in fastboot tupe fastboot getvar all, copy everything except imei and serial number, so someone can tell you what ruu can you use.
Hope i helped.
Click to expand...
Click to collapse
**UNLOCKED**
ENDEAVORU PVT SHIP S-on RL
HBOOT -1.36.0000
CPLD -NONE
MICROP -NONE
RADIO - 5.1204.162.29
EMMC - Bootmode : disabled
CPU - Bootmode : disables
HW SECURE BOOT : Enabled
Modem Path : off
And I chekced for root access in my phone using root checker and it shows that "your device does not have proper root access""..
Fastboot getvar version-main
Mr Hofs said:
Fastboot getvar version-main
Click to expand...
Click to collapse
I'm sorry but that's all I need to do to get software updates for my phone??? Sorry.I'm.still a noob in this
You have to download android sdk bundle (google) and go the platform tools folder, open a command prompt in that folder. Hold shift and click the right mouse button and select : open command window here. Then put the phone in the bootloader and press fastboot once. You see if all is correct in red text : fastboot usb.
Then enter the command in the command window on the pc and tell us what comes out
Mr Hofs said:
You have to download android sdk bundle (google) and go the platform tools folder, open a command prompt in that folder. Hold shift and click the right mouse button and select : open command window here. Then put the phone in the bootloader and press fastboot once. You see if all is correct in red text : fastboot usb.
Then enter the command in the command window on the pc and tell us what comes out
Click to expand...
Click to collapse
aite aite.got it done. this is what i got
INFOversion :0.5a
INFOversion-bootloader:1.36.0000
INFOversion-baseland : 5.1204.162.29
INFOversion-cpld : None
INFOversion-microp: None
INFOversion-main: 3.14.707.24
INFOserialno: SH**********
INFOimei: 359188045367570
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelidJ4610000
INFOcidnum: HTC__044
INFObattery-voltage:3915mV
INFOdevpower: 81
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode :FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckput: 0
all : Done
finished. total time: 0.836s..
so whats next ??
Download this ruu
http://www.androidruu.com/getdownlo...Radio_5.1204.162.29_release_296434_signed.exe
Relock the bootloader
Fastboot oem lock
Keep it in the bootloader and run the ruu.exe from the pc WITH admin rights. It should flash the phone to full stock.
Mr Hofs said:
Relock the bootloader
Fastboot oem lock
Keep it in the bootloader and run the ruu.exe from the pc WITH admin rights. It should flash the phone to full stock.
Click to expand...
Click to collapse
thanks a lot man. I got it fixed. and my phone is perfect
. thanks to u
No problem !
CASE CLOSED !
I tried to update my phone to 6.0 from 4.4.2 with ADB. Came with an error "System partition size error". It doesn't see the SD card when I tried to install from it.
My phone stuck at hboot screen. I can only access recovery and hboot menu. And when I tried to update to Lolipop with exe from a computer it says "Error 155: Unknown error". Xp 32 bit USB 2.0.
After I said reboot system through TWRP and it said No OS installed! .
But I have already installed ViperOne 3.2.1 Kitkat and Stock 4.4.4 before without any error still can't escape from boot menu. Any help would appreciate.
Here is some information:
S-OFF
Unlocked
version: 0.5
version-bootloader: 3.16.0.0000
version-baseband: 1.14.2133156.UA24G
version-cpld: None
version-microp: None
version-main: 1.12.401.17
version-misc: PVT SHIP S-OFF
serialno: FA43CSF00379
imei: ***********
imei2: Not Support
meid: 99000499006617
product: m8_whl
platform: hTCBmsm8974
modelid: 0P6B10000
cidnum: 11111111
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 0a41237a
hbootpreupdate: 11
gencheckpt: 0
And I think the device was T-Mobile 13000 at first but I'm not sure about it.
Did you update the firmware? I ran into a similar issue because my device shipped out with 4.4.2.
To update the firmware, you have to do the following:
Set your OEM's CID. Do not use SUPERCID.
My device was GPE, so [fastboot oem writecid GOOGL001]
Re-lock your Bootloader using Fastboot.
[fastboot oem lock ] then [fastboot reboot ruu]
You'll see the device logo centered onscreen.
Flash a firmware update file (does NOT have to be a whole ROM) and you'll be able to update to the threshold of that firmware.
I have Marshmallow firmware. So I can use MM or LP as well as KK ROMs now without bootloop.
Be sure to hit thanks if I helped! Be even more sure to PM me if you need help (like firmware files if you have the same variant).
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?
My current firmware is: 3.28.401.9. Which one do you suggest to install? And I would really appreciate if you send me firmware files. I'm not sure which variant's firmware I should use.
Edit: By the way I can install roms but ruu.exe gives me error.
DreamGod said:
My current firmware is: 3.28.401.9.
Click to expand...
Click to collapse
wrong ...
your firmware is 1.12.401.17 as shown on your getvar details on post #1.
and your device is a sprint device (m8_whl) and you should not flash any GSM firmware.
Sprint & GSM has different System partition size (your error)
change your model-ID currently shown as 0P6B10000 back to to sprint 0P6B70000
and install Sprint RUU or firmware. You can find them on Sprint forum.
furboom1240 said:
Did you update the firmware? I ran into a similar issue because my device shipped out with 4.4.2.
To update the firmware, you have to do the following:
Set your OEM's CID. Do not use SUPERCID.
My device was GPE, so [fastboot oem writecid GOOGL001]
Re-lock your Bootloader using Fastboot.
[fastboot oem lock ] then [fastboot reboot ruu]
You'll see the device logo centered onscreen.
Flash a firmware update file (does NOT have to be a whole ROM) and you'll be able to update to the threshold of that firmware.
I have Marshmallow firmware. So I can use MM or LP as well as KK ROMs now without bootloop.
Be sure to hit thanks if I helped! Be even more sure to PM me if you need help (like firmware files if you have the same variant).
Sent from my HTC M8 GPE
Mass Transit Honchkrow
Click to expand...
Click to collapse
He is S-Off. No need to relock the bootloader ever.
And for S-On users, the only time you will need to relock the bootloader is for running an RUU
Also, superCID will work with any firmware. No need to set the CID to his carrier's (not OEM's) CID
xunholyx said:
He is S-Off. No need to relock the bootloader ever.
And for S-On users, the only time you will need to relock the bootloader is for running an RUU
Click to expand...
Click to collapse
I thought so too. I'm also s-off but my firmware update stalled code 20 until I relocked the bootloader. But when I was finished I reversed that course [fastboot OEM unlock] and then dismissed the warning.
That's exactly what I did. Note that I mention RUU in my Fastboot instructions. :\
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?
furboom1240 said:
I thought so too. I'm also s-off but my firmware update stalled code 20 until I relocked the bootloader. But when I was finished I reversed that course [fastboot OEM unlock] and then dismissed the warning.
That's exactly what I did. Note that I mention RUU in my Fastboot instructions. :\
Sent from my HTC M8 GPE
Mass Transit Honchkrow
Click to expand...
Click to collapse
Error 20? Never heard of that one, no idea what it is.
ckpv5 said:
wrong ...
your firmware is 1.12.401.17 as shown on your getvar details on post #1.
and your device is a sprint device (m8_whl) and you should not flash any GSM firmware.
Sprint & GSM has different System partition size (your error)
change your model-ID currently shown as 0P6B10000 back to to sprint 0P6B70000
and install Sprint RUU or firmware. You can find them on Sprint forum.
Click to expand...
Click to collapse
Thank you I will try and tell the results. I though that my device was GSM didn't even know that it was Sprint. I was totally wrong at first then.
xunholyx said:
Error 20? Never heard of that one, no idea what it is.
Click to expand...
Click to collapse
Something I got in the Fastboot.
You open a command window and reference the file.
You either get a OKAY (milliseconds taken) or FAILED (error##). Some errors are obvious, like the cable disconnected, your recovery is out of date, update your SDK.
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?
furboom1240 said:
Something I got in the Fastboot.
You open a command window and reference the file.
You either get a OKAY (milliseconds taken) or FAILED (error##). Some errors are obvious, like the cable disconnected, your recovery is out of date, update your SDK.
Sent from my HTC M8 GPE
Mass Transit Honchkrow
Click to expand...
Click to collapse
Yeah, I know what the error codes are. LOL! I'm far from new at this.
I just haven't heard of error 20
xunholyx said:
Yeah, I know what the error codes are. LOL! I'm far from new at this.
I just haven't heard of error 20
Click to expand...
Click to collapse
Sometimes remembering this stuff makes my head hurt. I often went to webchat to diagnose issues or find similarities.
Sometimes it's how I word a problem, the other time its the problem itself that throws off a bit... ?
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?
ckpv5 said:
wrong ...
your firmware is 1.12.401.17 as shown on your getvar details on post #1.
and your device is a sprint device (m8_whl) and you should not flash any GSM firmware.
Sprint & GSM has different System partition size (your error)
change your model-ID currently shown as 0P6B10000 back to to sprint 0P6B70000
and install Sprint RUU or firmware. You can find them on Sprint forum.
Click to expand...
Click to collapse
Hello, it's me again. I'm trying to change my model-id but it shows like that:
P6B7\ (enter)
0000
My device won't open (only hboot and fastboot, no recovery) so I'm not sure how I can use adb since it doesn't show my device and its serial number. I appreciate your help...
DreamGod said:
Hello, it's me again. I'm trying to change my model-id but it shows like that:
P6B7\ (enter)
0000
My device won't open (only hboot and fastboot, no recovery) so I'm not sure how I can use adb since it doesn't show my device and its serial number. I appreciate your help...
Click to expand...
Click to collapse
How did you do that ? You wrote the code on your own instead of copy paste the whole code ? I don't know whether can fix that ... let's try again.
1. You need to install the old version TWRP recovery as your current hboot is 3.16.0.0000
install TWRP 2.8.1.0 - https://dl.twrp.me/m8/
2. After TWRP 2.8.1.0 installed, boot to recovery
mount - system
3. connect to PC and open a command prompt from your fastboot/adb folder then run command
adb shell
then this code (copy and paste .. don't write them on command prompt on your own)
Code:
echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x37\x00\x30\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384
exit
on recovery select reboot - bootloader
then run command fastboot getvar mid - you should have 0P6B70000 now (hopefully)
ckpv5 said:
How did you do that ? You wrote the code on your own instead of copy paste the whole code ? I don't know whether can fix that ... let's try again.
1. You need to install the old version TWRP recovery as your current hboot is 3.16.0.0000
install TWRP 2.8.1.0 - https://dl.twrp.me/m8/
2. After TWRP 2.8.1.0 installed, boot to recovery
mount - system
3. connect to PC and open a command prompt from your fastboot/adb folder then run command
adb shell
then this code (copy and paste .. don't write them on command prompt on your own)
Code:
echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x37\x00\x30\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384
exit
on recovery select reboot - bootloader
then run command fastboot getvar mid - you should have 0P6B70000 now (hopefully)
Click to expand...
Click to collapse
Firstly I want to thank you with your help I've changed model-id.
Then I installed this firmware: https://www.androidfilehost.com/?fid=24391638059059188
and the screen was like that: http://hizliresim.com/4lZjAL
I've succeeded to open boot menu. Then I tried to install this version: https://www.androidfilehost.com/?fid=24052804347796593
but sd card gave me "wrong zippe image!". When I tried to install with .exe it gave me "Error: 155 Unknown error". Couldn't install with command either. I think something is wrong with firmware or rom. By the way there's a text "OP6B100x" behind my phone. Are we sure about the variant of my phone? I'm not even sure which firmware and rom I should install. I appreciate all your help.
DreamGod said:
Firstly I want to thank you with your help I've changed model-id.
Then I installed this firmware: https://www.androidfilehost.com/?fid=24391638059059188
and the screen was like that: http://hizliresim.com/4lZjAL
I've succeeded to open boot menu. Then I tried to install this version: https://www.androidfilehost.com/?fid=24052804347796593
but sd card gave me "wrong zippe image!". When I tried to install with .exe it gave me "Error: 155 Unknown error". Couldn't install with command either. I think something is wrong with firmware or rom. By the way there's a text "OP6B100x" behind my phone. Are we sure about the variant of my phone? I'm not even sure which firmware and rom I should install. I appreciate all your help.
Click to expand...
Click to collapse
Text "OP6B100x" behind your phone most probably due to change of back cover.
Your getvar on post #1 clearly shown it is Sprint
meid: 99000499006617
product: m8_whl
where the "OP6B100x" should read
meid: 00000000000000
product: m8_ul
After you installed 6.20.651.3_full_firmware.zip, you should run the 6.20.651.3 RUU.exe (you should not get error 155)
but instead, you tried a lower version RUU.zip which require a htc_fastboot to flash it. I don't know what you meant by "sd card gave me "wrong zippe image!"". Was it you tried with external_sd method ?
about the screen that you get .. I don't know for sure .. maybe it's because your ROM version is wrong for the firmware that newly installed ... and maybe (the one that I'm always scare of) .. you previously installed GSM firmware 1.12.401.17 on a CDMA device which may altered some of your system partition tables.
That's why there's a big warning here : http://forum.xda-developers.com/showpost.php?p=51700638&postcount=2
warning! provided only for folks who have changed their mid and realized they shouldnt have,or achieved s off via a java card. DO NOT change a gsm or vzw device to this in attempts to use it on sprint and convert to a sprint device(or vice versa).
Can you post current fastboot getvar all result after you made all these changes ? You may need to reflash the 6.20.651.3 and run 6.20.651.3 RUU.exe after the firmware installed.
ckpv5 said:
Text "OP6B100x" behind your phone most probably due to change of back cover.
Your getvar on post #1 clearly shown it is Sprint
meid: 99000499006617
product: m8_whl
where the "OP6B100x" should read
meid: 00000000000000
product: m8_ul
After you installed 6.20.651.3_full_firmware.zip, you should run the 6.20.651.3 RUU.exe (you should not get error 155)
but instead, you tried a lower version RUU.zip which require a htc_fastboot to flash it. I don't know what you meant by "sd card gave me "wrong zippe image!"". Was it you tried with external_sd method ?
about the screen that you get .. I don't know for sure .. maybe it's because your ROM version is wrong for the firmware that newly installed ... and maybe (the one that I'm always scare of) .. you previously installed GSM firmware 1.12.401.17 on a CDMA device which may altered some of your system partition tables.
That's why there's a big warning here : http://forum.xda-developers.com/showpost.php?p=51700638&postcount=2
warning! provided only for folks who have changed their mid and realized they shouldnt have,or achieved s off via a java card. DO NOT change a gsm or vzw device to this in attempts to use it on sprint and convert to a sprint device(or vice versa).
Can you post current fastboot getvar all result after you made all these changes ? You may need to reflash the 6.20.651.3 and run 6.20.651.3 RUU.exe after the firmware installed.
Click to expand...
Click to collapse
After I installed Marshmallow, I can open phone now. Thank you for your all help.
Oh, thanks
i just bought HTC M8 Days ago but it was pre rooted and on the 5.0.1 i cant update it to marshamllow
it S-Off and when i try to update it says you have the latest update
Software number
4.18.708.12
i tried to install OTA Flash via stock recovery but i got error
how i updaate manually or enable OTA's
dont wanna root now
please help me here
You can't install OTA on rooted ROM ... it needs pure non-rooted stock ROM.
You can try to restore only the system partition from non-rooted backup.
You can get the backup and stock recovery for 4.18.708.12 here : http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
i deleted root before doing any thing
can i do it without rooting or unlocking bootloader because i dont know how to do it on HTC Phone and those CID and stuff really bug me out
itried flashing ota with stock recovery got this error
http://prntscr.com/bivh4o
whats wrong here ?
Why on post #1 you said you have HKG 4.18.708.12
But in your screenshot you tried to install EU 6.12.401.4 OTA
and it failed because your stock recovery is TMOB US.
Post here fastboot getvar all result without serial & imei no.
We need to make sure the correct version that you have.
ckpv5 said:
Why on post #1 you said you have HKG 4.18.708.12
But in your screenshot you tried to install EU 6.12.401.4 OTA
and it failed because your stock recovery is TMOB US.
Post here fastboot getvar all result without serial & imei no.
We need to make sure the correct version that you have.
Click to expand...
Click to collapse
which one shoud i download
look at this photo
https://scontent-cai1-1.xx.fbcdn.ne...=ff0997ed8a4598b2c6cfe73d1dc0fc42&oe=576EED9B
iDuc said:
which one shoud i download
look at this photo
https://scontent-cai1-1.xx.fbcdn.ne...=ff0997ed8a4598b2c6cfe73d1dc0fc42&oe=576EED9B
Click to expand...
Click to collapse
The photo is not helpful enough.
One more time I request for fastboot getvar all result.
You may need this : http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
Htc one m8 not getting the OTA marshmallow
Hey i have htc one m8 running 4.4.4 and i am not getting the OTA update so i searched ur site and first of all i run a command fastboot getvar it says that my phone version is 0P6B130 and carrier is T-mobile so i downloaded the ruu from htc.com for t mobile and try to install but nothing happens and then i searched more and more about mid and cid i installed a app from playstore it shows main cid is T-MOB010 but i red it in detail its shows two mids and two cids.my bootloader version is 3.19.0.0000 and s-off and its locked and status is official.
maincid:Htc_001
Modelid:0P6B10000
Bootloader:3.19.0.0000
Ro.cid:T-MOB010
Ro.mid:0P6B13000
I just wana update my phone to official marshmallow update dont wana root it.plz guide me or give me link for OTA update for my phone so i can install through its stock recovery. Thanks in advance
Demigodlovesu said:
Hey i have htc one m8 running 4.4.4 and i am not getting the OTA update so i searched ur site and first of all i run a command fastboot getvar it says that my phone version is 0P6B130 and carrier is T-mobile so i downloaded the ruu from htc.com for t mobile and try to install but nothing happens and then i searched more and more about mid and cid i installed a app from playstore it shows main cid is T-MOB010 but i red it in detail its shows two mids and two cids.my bootloader version is 3.19.0.0000 and s-off and its locked and status is official.
maincid:Htc_001
Modelid:0P6B10000
Bootloader:3.19.0.0000
Ro.cid:T-MOB010
Ro.mid:0P6B13000
I just wana update my phone to official marshmallow update dont wana root it.plz guide me or give me link for OTA update for my phone so i can install through its stock recovery. Thanks in advance
Click to expand...
Click to collapse
if the first cid and mid is the current now you can't flash Tmobile RUU
( there is a simple fix for this issue as you said your device is s-off but i'm afraid to say it,then you screw up )
so post the result of fastboot getvar all ( after removing serial and imei numbers ) to be certain what you need to do
and don't use an app to read cid and mid
Ok.i dont know how to add a image there so i am writing it
Version Bootloader 3.19.0.0000
VersionBaseband:1.21.21331147A1.19_2g
version Cpld:none
Version main: 3.28.401.6
Version misc pvt ship s-off
Meid 00000000000000
Product m8_ul
Platform htcBmsm8974
Modelid 0P6B13000
Cidnum 11111111
Partion layout generic
Security off
Buildmode SHIP
boot mode fastboot
Commitno-bootloader df77f8b7
Hbootpreupdate 11
Gencheckpt 0
Demigodlovesu said:
Ok.i dont know how to add a image there so i am writing it
Version Bootloader 3.19.0.0000
VersionBaseband:1.21.21331147A1.19_2g
version Cpld:none
Version main: 3.28.401.6
Version misc pvt ship s-off
Meid 00000000000000
Product m8_ul
Platform htcBmsm8974
Modelid 0P6B13000
Cidnum 11111111
Partion layout generic
Security off
Buildmode SHIP
boot mode fastboot
Commitno-bootloader df77f8b7
Hbootpreupdate 11
Gencheckpt 0
Click to expand...
Click to collapse
Are you located in US and on T-Mobile network ?
If no, I suggest you to change the MID to EU MID 0P6B10000 then install EU Marshmallow RUU.
Some say once you have SuperCID, there is no need to change MID as SuperCID will override MID but in my experience that will never happen (flashing a modded firmware.zip is different as it has almost all MID in its android-info.txt). Unless you MID is SuperMID, you need to change MID to EU if you want to install EU RUU.
You can follow this guide to change MID - https://forum.xda-developers.com/showthread.php?t=2708581
then install RUU - https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
If yes, in US and on T-Mobile network, you need different approach.
I am in pakistan
Demigodlovesu said:
I am in pakistan
Click to expand...
Click to collapse
Then go for the option that I mentioned earlier.
First - change MID
Second - install RUU
Change MID
What you need to do .. boot to bootloader and install TWRP - maybe version 2.8.7.0 will do
https://dl.twrp.me/m8/
after you install TWRP - boot to recovery
Mount - system
then open command prompt from your adb/fastboot folder
then type
adb shell
follow by
Code:
echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x31\x00\x30\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384
don't write yourself the code, copy and paste
then type exit
select reboot menu, select bootloader
then install RUU
Edit : your bootloader is locked, relocked or unlocked ? If locked and relocked, you can't fastboot flash the TWRP in normal way.
Download this : https://forum.xda-developers.com/showpost.php?p=70439093&postcount=412
No worry about the OS no. that will be changed later once you install RUU
fastboot oem rebootRUU
fastboot flash zip 0P6BIMG.zip
fastboot reboot-bootloader
then follow with the above to change MID
Install RUU
Follow this - https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
There is something i didnt mention earlier i have ruu.exe for Tmobile htc one m8 which i downloaded from htc.com and when i try to install it nothing happens why is that?
Demigodlovesu said:
i have ruu.exe for Tmobile htc one m8 which i downloaded from htc.com and when i try to install it nothing happens why is that?
Click to expand...
Click to collapse
Not enough info to say, for sure.
Which RUU number?
Exactly where does it get stuck? Any error messages?
After double clicking the ruu the installaion wizard pops up and after selecting the next option the installion bar goes to full and after that installion wizard vanishes and nothing happens.
Demigodlovesu said:
After double clicking the ruu the installaion wizard pops up and after selecting the next option the installion bar goes to full and after that installion wizard vanishes and nothing happens.
Click to expand...
Click to collapse
You didn't answer all the questions, what RUU number?
6.20.531.5
Demigodlovesu said:
6.20.531.5
Click to expand...
Click to collapse
RUU problems are usually on the PC end. Try a different USB port, or different cable. Try to re-install HTC Sync and HTC drivers.
Thanks man.you are a great help ?
I managed to run a ruu.now it is giving a error 155 unkown error and its says please find a correct ruu?
Guys, my htc one m8 tmobile op6b130 ( bootloader looked, s-off) current software 4.16.1540.8. ... It does not install the update and says that i must revert back to original system software because it is modified version.
so please guide me how to get it done.. how do i install the update. Thanks
What do you mean by software number (where are you reading the nubmer)? Best thing to go by, is the OS number listed on the bootloader screen.
Also, an OTA will fail if the phone is rooted, custom ROM, or even unrooted (needs to be a never rooted stock ROM).
If you know how, do fastboot getvar all, and post the results (delete IMEI and serial number before posting).
Otherwise, did you change the CID or MID (and know what they currently are)?
Bootloader screen is like
Software status official
***locked*** S -off
cid -11111111
OS 4.16.1540.8
The model written at rear bottom of my htc is Op6b130 .
i get update with a number 4.17.1540.9 which does not install.
Thats the real confusion with me .. so please tell me the way how do i install the next updates.
mfaizi16 said:
Bootloader screen is like
Software status official
***locked*** S -off
cid -11111111
OS 4.16.1540.8
The model written at rear bottom of my htc is Op6b130 .
i get update with a number 4.17.1540.9 which does not install.
Thats the real confusion with me .. so please tell me the way how do i install the next updates.
Click to expand...
Click to collapse
The phone is heavily modified. It has some point been rooted, SuperCID (11111111) and had the US Developers Edition (4.16.1540.8) firmware and/or RUU applied.
Do you know the history of these mods; did you do them, or did someone else mod the phone?
Can't say for certain, unless I know more details. But the easiest way to update to the latest (MM) version may be to flash 6.12.1540.4 firmware, then flash the 6.12.1540.4 RUU.
I did not do anything like that. I got my htc in this form.
so if MM update is better. Can you please tell me the procedure of installing firmware and ruu file as you said. I would be very grateful to you for this.
Would this procedure be right for me?
https://forum.xda-developers.com/ht...uide-htc-one-m8-to-developer-edition-t3331854
mfaizi16 said:
Would this procedure be right for me?
https://forum.xda-developers.com/ht...uide-htc-one-m8-to-developer-edition-t3331854
Click to expand...
Click to collapse
Yes, that would actually work, and describes what I was talking about. Nice work finding it yourself!
I'm not sure whether you need to change the MID or not. CID is fine to run the 6.12.1540.4 firmware and RUU. And SuperCID will actually bypass the MID in some situations (but not all). Plus, with the info given so far, I can't tell what the current MID is (it may already have been changed).
If you do need to change the MID, you will also need root. So that would be more steps.
So my advice is to first skip the steps of changing CID and MID. Just go to the steps of flashing the 6.12.1540.4 firmware and RUU. If the firmware fails due to wrong MID, it will tell you that via an error message; and we can tackle that issue if it comes up. But if it works on the current MID, then we've saved some steps.
Best (most accurate) way to determine the current MID, is to do command: fastboot getvar all
Then post the output (delete IMEI and serial number before posting).
This will also give us a lot more useful info on the device.
You'll need to use fastboot anyway (for the guide you linked), if you don't already know how. So you may as well figure it out now. The command should also work with the htc fastboot given in the thread you linked, but would be: htc_fastboot getvar all
in fastboot getvar all ... i got
version bootloader: 3.19.0.0000
version baseband: 1.24.21331147A1.09G
version cpld: none
version microp: noone
version mics: pvt ship s-off
meid: 00000000000000
Os : 4.16.1540.8
product: m8_ul
platform: hTCBmsm8974
modelid: OP6B13000
cidnum: 11111111
partition layout: generic
security: off
buld mode: ship
boot mode: fastboot
mfaizi16 said:
in fastboot getvar all ... i got
version bootloader: 3.19.0.0000
version baseband: 1.24.21331147A1.09G
version cpld: none
version microp: noone
version mics: pvt ship s-off
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: OP6B13000
cidnum: 11111111
partition layout: generic
security: off
buld mode: ship
boot mode: fastboot
Click to expand...
Click to collapse
Good to go with 6.12.1540.4 flashing from the guide you linked
Flash the firmware.zip in RUU mode then reboot to bootloader make sure the new os number is 6.12.1540.4 then proceed to flash the RUU.exe
Good luck
Sent from my HTC M8 using XDA Labs
do I need to change Cid & Mid?
when i typed adb.exe shell .. it gave me error that no device is there .
although it showed me my serial number when typed adb devices. it ran fine.
but what's the problem with adb.exe shell?
secondly, is it ok to jump from 4.16.1540.8 to directly 6.12.1540.4?
mfaizi16 said:
do I need to change Cid & Mid?
when i typed adb.exe shell .. it gave me error that no device is there .
although it showed me my serial number when typed adb devices. it ran fine.
but what's the problem with adb.exe shell?
Click to expand...
Click to collapse
no need to change anything you have supercid and the right mid,it will pass the check
it's "adb shell" not "adb.exe shell"
---------- Post added at 07:43 PM ---------- Previous post was at 07:42 PM ----------
mfaizi16 said:
secondly, is it ok to jump from 4.16.1540.8 to directly 6.12.1540.4?
Click to expand...
Click to collapse
yes but use the steps in the guide flash firmware.zip then flash the RUU.exe
While flashing ruu file, when I typed fastboot flash zip rom.zip
It said that targeted maximum download reported 1825********* bytes.
And my pc stucks there and htc stuck there with htc logo..
So what do i do now?
mfaizi16 said:
While flashing ruu file, when I typed fastboot flash zip rom.zip
It said that targeted maximum download reported 1825********* bytes.
And my pc stucks there and htc stuck there with htc logo..
So what do i do now?
Click to expand...
Click to collapse
try another usb port ( use usb 2 not 3 ) and make sure the drivers are installed properly
mfaizi16 said:
While flashing ruu file, when I typed fastboot flash zip rom.zip
It said that targeted maximum download reported 1825********* bytes.
Click to expand...
Click to collapse
You need to use the htc_fastboot to flash the RUU, as indicated in the guide you linked (and required files downloaded from there as well). The "generic" Android fastboot can't handle files that big.
Although, you should drop the ".exe" (indicated in the guide) from all the fastboot commands. I've never seen ".exe" included on fastboot and adb commands, and it will probably cause you an error like it did when flashing firmware. So the command should be:
htc_fastboot oem rebootRUU
htc_fastboot flash zip rom.zip
---------- Post added at 09:51 AM ---------- Previous post was at 09:47 AM ----------
mfaizi16 said:
secondly, is it ok to jump from 4.16.1540.8 to directly 6.12.1540.4?
Click to expand...
Click to collapse
Yes, that is fine. Which is why I told you to do it. If anything else needed to be done, I would have indicated that.
RUU doesn't need to be installed in sequence, meaning you can skip a version(s). RUU is different from OTA, as OTA typically does need to be installed in sequence.
With s-off, you can even go backwards with RUU. Which is also something you can't do with OTA.
while flashing firmware , it first said 'failed' and then automatically came with 'finished and time' .
When i went to ruu .. i first used htc_command .. but it said that ' this command is not in internal and external blaa blaa'. So i went without htc_ and got stuck and waited about half hour for that. Then , knowing nothing i did factory reset with wipe cache to restore my phone back to 4.16.1540.8.
Are there any pre-requisites that phone shold be unlocked and rooted (as i saw some videos on youtube)?
My phone is s-off, bootloader locked and no root access.
mfaizi16 said:
while flashing firmware , it first said 'failed' and then automatically came with 'finished and time' .
Click to expand...
Click to collapse
If it gave a message about "flush image immediately" this just means you need to flash the firmware again (needing to flash 2 times is normal and expected).
If the firmware installed correctly, you will see OS 6.12.1540.4 on the bootloader screen, and also see 6.12.1540.4 for "version-main" if you do fastboot getvar all.
You must have 6.12.1540.4 firmware properly installed, in order to flash the RUU.
mfaizi16 said:
When i went to ruu .. i first used htc_command .. but it said that ' this command is not in internal and external blaa blaa'.
Click to expand...
Click to collapse
You are getting that message, since you are not executing the command from the folder where htc_fastboot.exe is located. After you download htc_fastboot from the thread you linked, open Command Prompt in the folder (Left Shift + Right Mouse Click) and run the commands.
Leaving off the "htc" means you are trying to use the "generic" fastboot tool (fastboot.exe). Which would also confirm the fact you are probably running the command from the wrong folder. Again, using the regular fastboot will never work, since it can't handle the file size of the RUU.
mfaizi16 said:
Are there any pre-requisites that phone shold be unlocked and rooted (as i saw some videos on youtube)?
My phone is s-off, bootloader locked and no root access.
Click to expand...
Click to collapse
You mean prerequisites for the RUU? If so, saying bootloader unlocked and rooted are prerequisites is false and incorrect. If you saw it on a YouTube, you are confusing RUU with something else.
Bootloader locked is normally (s-on) a requirement for RUU. But since you are s-off, it will run with the bootloader unlocked, locked or relocked.
Root has no effect on RUU. RUU will run, whether the phone is rooted or not.
---------- Post added at 11:43 AM ---------- Previous post was at 11:41 AM ----------
mfaizi16 said:
Then , knowing nothing i did factory reset with wipe cache to restore my phone back to 4.16.1540.8.
Click to expand...
Click to collapse
What exactly are you trying to "restore" or accomplish with this? It's not clear you have even installed anything past 4.16.1540.8, to begin with.
Finally did it successfully!
Thank you everyone for guiding me.
redpoint73 said:
What do you mean by software number (where are you reading the nubmer)? Best thing to go by, is the OS number listed on the bootloader screen.
Also, an OTA will fail if the phone is rooted, custom ROM, or even unrooted (needs to be a never rooted stock ROM).
If you know how, do fastboot getvar all, and post the results (delete IMEI and serial number before posting).
Otherwise, did you change the CID or MID (and know what they currently are)?
Click to expand...
Click to collapse
Hi I can see you are kind on HTC M8. Can you help me? My phone don't see updates. It sprint version.
The was changed to super cid. HTC sync manager don't recognise it Nobody from HTC can help me. They don't know what to do.
pablo_com said:
Hi I can see you are kind on HTC M8. Can you help me? My phone don't see updates. It sprint version.
The was changed to super cid. HTC sync manager don't recognise it Nobody from HTC can help me. They don't know what to do.
Click to expand...
Click to collapse
If you know how, do fastboot getvar all, and post the results (delete IMEI and serial number before posting).
Basically, Sprint (and most US carrier versions of the M8) won't update if not connected to that actual US carrier (Sprint, in your case). Also, you can NOT "modify" the Sprint version to make it another version (such as Euro), and the reason for that is that the Sprint version you will radio brick the device doing this! So don't try it!
You can update using the RUU meant for the Sprint M8 (and only the RUU meant for the Sprint M8, for the reason mentioned above). Whether you need to update or not (by RUU) depends on what it says in the getvar info I asked for above.