Develop Bugs

Back to Stock, but how exactly?

Hello togehter,
i found this to-do-list:
1. Flash a ROM and boot image based on 1.26 (e.g ARHD 2.1)
2. Clear fastboot cache
Code:
fastboot clear cache
3. Boot your phone
4. Charge you phone completely
5. Download stock recovery
6. Flash stock recovery
Code:
fastboot flash recovery endeavoru_recovery_signed.img
7. Relock bootloader
Code:
fastboot oem lock
8. Run 1.26 RUU
Click to expand...
Click to collapse
so not that big deal at all. i got the vodafone 1.26 ruu
but i dont find i 1.26.x rom. could i doo this from a 1.29 rom too? normaly the ruu should override everthing right?
one x got wlan problems, signal jumping like hell, nothing helps (reboot, reflash, router reboot, other router...). SO back to stock for warrenty exchance.
greetings and thanks

Hello neighbour..xD
Should be no problem like you posted it, flash 1.29 and you are good to go..

thanks
downloading ruu... takes 2 hours. to premium @ filefactory^^
greetings

ah, just one more question
which recovery to flash?
stock 1.26 for 1,26 ruu right?
or 1.29 for running 1.29 rom in the back
greetings

This video might help...

bigoliver said:
This video might help...
Click to expand...
Click to collapse
That's a good guide, but btw...
Make sure your phone is AT LEAST 50% charge.
Because, during the updating process, it will not charge with the usb cable and therefore not going to charge the phone.
If it shuts off during updating, you cannot charge the phone even if it's off.

NitNav said:
That's a good guide, but btw...
Make sure your phone is AT LEAST 50% charge.
Because, during the updating process, it will not charge with the usb cable and therefore not going to charge the phone.
If it shuts off during updating, you cannot charge the phone even if it's off.
Click to expand...
Click to collapse
Good advice, you should always flash with plenty of battery.
Sent from my HTC Desire using xda premium

holy.......
RUU won't run
i think its because the blank cid number.
what RUU will work? device just boot in fastbook mode, nothing else possible now
greetings and HELP

Havoc2k said:
holy.......
RUU won't run
i think its because the blank cid number.
what RUU will work? device just boot in fastbook mode, nothing else possible now
greetings and HELP
Click to expand...
Click to collapse
I had this problem, I was trying to flash the original rom that came with the phone, but, because I had, at some point, officially ota updated the software I needed to revert back to the updated software. Hope this helps,
Oliver
Sent from my HTC Desire using xda premium

sy i dont get the point.
so what to do?
phone was running at 1.29.xx (latest FW from htc)
ruu is for 1.26.xx
recovery img is 1.26 too
can't flash anything right now cause the phone is relocked now
greetings
edit: fault msg:
Error [131] CUSTOMER ID ERROR
The ROM Update Utility cannot update your Android phone
please get the correct rom update utility and try again.
Click to expand...
Click to collapse
so its because the CID, but hmm what to do now :/
greetings

Havoc2k said:
sy i dont get the point.
so what to do?
phone was running at 1.29.xx (latest FW from htc)
ruu is for 1.26.xx
recovery img is 1.26 too
can't flash anything right now cause the phone is relocked now
greetings
Click to expand...
Click to collapse
When RUU 1.26 didn't work for me I tried RUU 1.28 (latest three branded RUU) And that worked.
I think you might be trying to flash the wrong RUU you need the latest version of your RUU that you have previously ran on your phone.
It sounds to me from your posts that you need the 1.29 RUU but it's your responsibility to make sure you use the correct RUU.
Sent from my HTC Desire using xda premium

some advice please

hi
last night i tried to install android revolution HD 14.1 jellybean on my one x.
i unlocked the bootloader and put clockwork recovery on. I then created a backup through cwr just in case anything went wrong.
I then followed the guide on here to install the rom.
long story short it got stuck in a boot loop. I obviously didn't put the right boot.img file.
i still had access to recovery etc and continued to search online for solutions.
I decided to try and install the rom again.
so i relocked the bootloader and rebooted. i opened command prompt and typed in " fastboot oem rebootRUU" but i get (bootloader) (ERR) command error !!!
what do i do?

Did you update your HBOOT before you unlocked your bootloader?
What is your current HBOOT version?
Have you flashed the correct boot.img for ARHD 14.1?
We need a little more info on what you have done and/or not done.

andyharney said:
Did you update your HBOOT before you unlocked your bootloader?
What is your current HBOOT version?
Have you flashed the correct boot.img for ARHD 14.1?
We need a little more info on what you have done and/or not done.
Click to expand...
Click to collapse
Hboot version 1.12.0000
I flashed the wrong boot.img i think.
The battery is low and im currently rebooting it while plugged into the mains to give it a charge.

verminatorno5 said:
Hboot version 1.12.0000
I flashed the wrong boot.img i think.
The battery is low and im currently rebooting it while plugged into the mains to give it a charge.
Click to expand...
Click to collapse
You need to update your HBOOT to the latest one using this tool,
http://forum.xda-developers.com/showthread.php?t=1924003
You need to put your unlock tiken and Boot.img in the same unzipped file as the firmware flasher stuff. Boot your phone into fastboot, start the .bat file and let it do it's thing, it will talk you through each step as it's doing it. Then you just need to flash the rom in recovery. Make sure your CID is on the list in the first page

exocetdj said:
You need to update your HBOOT to the latest one using this tool,
http://forum.xda-developers.com/showthread.php?t=1924003
You need to put your unlock tiken and Boot.img in the same unzipped file as the firmware flasher stuff. Boot your phone into fastboot, start the .bat file and let it do it's thing, it will talk you through each step as it's doing it. Then you just need to flash the rom in recovery. Make sure your CID is on the list in the first page
Click to expand...
Click to collapse
Do i need to charge it a bit more?

verminatorno5 said:
Do i need to charge it a bit more?
Click to expand...
Click to collapse
Always a good idea lol

exocetdj said:
Always a good idea lol
Click to expand...
Click to collapse
ok, it still says batter low, it's ate 3523Mv. what does it need to be at?
and when it asks me to download an ruu where do i go from here?

verminatorno5 said:
ok, it still says batter low, it's ate 3523Mv. what does it need to be at?
and when it asks me to download an ruu where do i go from here?
Click to expand...
Click to collapse
Batt at least 50% but best to full charge. You shouldn't need an ruu for this

exocetdj said:
Batt at least 50% but best to full charge. You shouldn't need an ruu for this
Click to expand...
Click to collapse
right, so which option do i select first? sorry about the 101 questions but i want to be sure

verminatorno5 said:
right, so which option do i select first? sorry about the 101 questions but i want to be sure
Click to expand...
Click to collapse
ok, so i've updated hboot to 1.31. and unlocked the bootloader again. but now i can't flash recovery, i get FAILED Commaned write failed, unknown error.
what do i do now?

Probably best to flash the recovery and boot.img through fastboot manually and then Rom through recovery.

exocetdj said:
Probably best to flash the recovery and boot.img through fastboot manually and then Rom through recovery.
Click to expand...
Click to collapse
Success!
Thanks for all your help

[Q] Q: Firmware Package HTC One X

I'm going to update my htc one x to jelly bean from ICS, using custom ROM (ARHD), it was noted that I need a firmware package, and now that I found the package for my CID because took sometime before I found it, is it really required to flash it? TIA

For JB roms you need a JB hboot those are the 1.31 and higher up. Except for the aosp JB roms, those run also on the lower ics hboots.
So if you are on a lower hboot then 1.31 then yes you need to upgrade the hboot

Now I think everything's messed up and I badly need help here, so stupid with I did.
At one moment, my phone is stuck at One tm screen, after I flash the boot.img and installed the custom ROM. I tried to restore my phone using CWM but it still stucked. It was too late before I realized how to flash the firmware package that I need to rename what I downloaded to firmware.zip. I tried flashing the firmware without knowing that I have to relocked my phone before I flash it. Now I relocked my phone and I'm stucked with hboot and I can't do anything at the moment.

With it relocked. In fastboot do
fastboot oem rebootRUU (note the capitals)
Your phone will then reboot into a black screen with the HTC logo.
Then do fastboot flash zip firmware.zip
Once completed fastboot reboot-bootloader
It will reboot into bootloader
Then unlock and flash recovery again.
Flash boot image and reinstall ROM and you should be good to go
Sent from my HTC One X using xda app-developers app

bagofcrap24 said:
With it relocked. In fastboot do
fastboot oem rebootRUU (note the capitals)
Your phone will then reboot into a black screen with the HTC logo.
Then do fastboot flash zip firmware.zipOnce completed fastboot reboot-bootloader
It will reboot into bootloader
Then unlock and flash recovery again.
Flash boot image and reinstall ROM and you should be good to go
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Cannot load "firmware.zip" always shows up. My CID is HTC_044, and as far as I know I downloaded the correct firmware package for my phone according to ARHD forum. Thanks in advance.

Did you have the firmware.zip in your fastboot folder?

Yes. And I downloaded it 3 times just to make sure it is the right firmware.

Oh and sometimes you need to flash it 3 or 4 times to succeed. I had to do the command 3 times when I flashed my firmware.
So try it multiple times in a row.
Sent from my One X

Sorry but I tried several times and "error: cannot load 'firmware.zip' all the time. What could be the problem?
During at work. I thought if is it possible just to return to stock ROM? But I just can't find the proper RUU yet.
cid: htc_044
version-main: 1.29.707.11

I'm currently charging my phone using the batch file I found here in xda. I saw a lot of posts regarding flashing the current version of CWM so you can charge your battery, I think my CWM is in version 5.8.1.0, and as far as I know you have to unlock your hboot before you can flash recovery, so it's impossible for me to flash 5.8.4.0? Am I correct here or I can just proceed to the other steps?

I can check tonight if i have your RUU !

Mr Hofs said:
I can check tonight if i have your RUU !
Click to expand...
Click to collapse
Thank you Mr Hofs! And, should my battery level is 30% or higher before I can flash the RUU?

Yes ! If you can't get enough power with the batt script you can flash the latest cwm recovery and charge the battery in there to 100% if you want to.
Unlock the bootloader first if it is still locked

Mr Hofs said:
Yes ! If you can't get enough power with the batt script you can flash the latest cwm recovery and charge the battery in there to 100% if you want to.
Unlock the bootloader first if it is still locked
Click to expand...
Click to collapse
I was done in re-unlocking my bootloader, but then I still can't flash cwm recovery because it says low battery, then I tried to use the batt script again and of course it cannot work since I just re-unlocked my bootloader.

I never tried it with a unlocked bootloader, have you tried it ?

Yes, I tried it and it doesn't work.
What I did for the past hours, I tried to restore my phone again using cwm recovery, still nothing changed, still stucked at htc one logo, then I turned it off trying to charge it using the main charger and it does have light in its LED, left it for a while and now it doesn't turn on.

Try it with phone connected to the pc, it seems to make a difference sometimes....and if you are capable again to run the bat script then leave it for 2.hours or so !

Now it's working. The first time I used the batt script, I thought it could charge more than 3681mV but It didn't work as it didn't get higher than 3681mV. I HOPE it's enough just to flash the cwm recovery. Thanks Mr Hofs, will update asap.

[SOLVED] Hboot upgrade attempt failed

I'm trying to help a friend remotely fix his current brick of a HOX and would like some pro advice to ensure im telling him the right thing. Info I have:
Its S-On UK T Mobile CID T-MOB005.
He obtained a 1.39 firmware from somewhere that matched his CID
At some point in the process the firmware flash failed or partially flashed
His Custom Recovery is gone
His HBoot version has not increased (i think 1.12)
He has a security warning under the 'relocked' message in bootloader
Before he tried the firmware upgrade he flashed viper x 3.4.0 + boot.img so the phone wont boot up normally now
He has a nandroid backup from before the process.
Im going to recommend to him to download the 1.36 firmware from Mikes thread here http://forum.xda-developers.com/showthread.php?t=1957376 (i notice there is no 1.39 available for his CID so im suspicious this was a duff file he had for 1.39)
If he cant flash it because of low power then he should use the charging batch script first or re-unlock, flash CWM, restore nandroid and flash the boot.img from it so he can boot phone and charge it normally or from cwm.
I guess after that start to look at an RUU or a stock nandroid backup download to be able to do the firmware OTA ?
My own HOX is S-Off so im not as familiar with the process as i never worried about the correct firmware or had to flash boot.img separately from roms or nandroids.
Any tips appreciated.
Cheers

Re: Hboot upgrade attempt failed
Yeah that's about it.....only flashing the rom is not going to work because of the low hboot.
Just charge the battery and and unlock the bootloader, then reflash a custom recovery and charge the battery up in there.
With enough power he can relock the bootloader and flash the firmware
Fastboot oem lock
Fastboot rebootRUU (watch the capital letters)
Fastboot flash zip firmware.zip
Unlock the bootloader
Fastboot flash unlocktoken unlock_code.bin
Then flash the custom recovery again and install a new rom ! :thumbup:

Cheers, so out of interest what causes the Security Warning in the bootloader ? Is it because the phone knows there is a screwed up firmware flash or knows it cant boot\has low power ? It must have done something as his custom recovery was wiped even though the Hboot ver didnt change.

how does the security warning look like exactly.....i know there is a warning because the bootloader is relocked. don't know if we are talking about the same picture now

Re: Hboot upgrade attempt failed
You have to relock the boot loader to flash an updated firmware which is the point you are at and why you are seeing the security warning.
The first time you flash the updated firmware it flashes everything else.
Stock recovery, boot.IMG and sometimes other partitions.
Then it tries to flash the hboot and fails.
All you usually have to do is tell it to flash a second time and then in succeeds in updating boot.
Obviously he stopped after the first attempt which is why only the recovery changed and not the hboot.
I doubt he has a bogus firmware as the phone will not attempt to flash anything that isn't signed and cid matched.
Sent from my HTC One X using xda app-developers app

bagofcrap24 said:
You have to relock the boot loader to flash an updated firmware which is the point you are at and why you are seeing the security warning.
The first time you flash the updated firmware it flashes everything else.
Stock recovery, boot.IMG and sometimes other partitions.
Then it tries to flash the hboot and fails.
All you usually have to do is tell it to flash a second time and then in succeeds in updating boot.
Obviously he stopped after the first attempt which is why only the recovery changed and not the hboot.
I doubt he has a bogus firmware as the phone will not attempt to flash anything that isn't signed and cid matched.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Great will check, just assumed he had tried it twice as all instructions I've seen state that you must but then again i dont know what instructions he followed - maybe he didnt ! Ive not seen this explanation of whats being flashed and in what order before - cheers.

Mr Hofs said:
how does the security warning look like exactly.....i know there is a warning because the bootloader is relocked. don't know if we are talking about the same picture now
Click to expand...
Click to collapse
Ive not seen it but i assume its something like this
*** RELOCKED ***
*** Security Warning ***
Then all the usual bootloader stuff
based on images ive seen before on web. can find them with a quick google of images.

Re: Hboot upgrade attempt failed
Yeah that's normal :thumbup:

Re: Hboot upgrade attempt failed
Ok it lives ! Was a combination of the firmware file and his battery being too low to flash so he put cwm back on, charged and then followed my instructions. Cheers for help
This is the what I sent him incase anyone else finds them useful. Assumes you know roughly what your doing and that you must get back to fastboot usb for the commands .
-----------------------------
So get phone into fastboot mode by power plus vol and choose it in bootloader., plug usb in so it says fastboot usb, then get command prompt in directory with fastboot in on pc.
1. Lock bootloader with: fastboot oem lock
2. Vol and power down to get into bootloader again
3.fastboot oem rebootRUU
4. Should now get phone with silver HTC in middle on black
5. fastboot flash zip firmware.zip where this is the new firmware for your cid.
6. Might fail first time. Do it again and it works
7. Should now see green bar completed under the htc
8. Power and vol to get to bootloader. The hboot should now be updated.
9. Now to unlock bootloader again
. fastboot flash unlocktoken unlockcode.bin (where unlockcode.bin is the file you got from htcdev)
10. Now on the phone select yes and it reboots.
11. Don't wait just use power and vol to get into bootloader.
12. Flash custom recovery again. fastboot flash recovery recovery.img where recovery.img is the cwm 5.8.4.0
13. You can now flash your chosen Rom boot.img. fastboot flash boot boot.img
14. fastboot erase cache
15. Now use recovery to flash the Rom.
16. Done
Sent from my HTC One X

Very good :thumbup:
CASE CLOSED !

I have to say that the OP did a great job at providing the needed information. I wish everyone would describe their problems as good as the OP of this thread, it would make helping people out hell of a lot easier.
Sent from my HTC One X using xda app-developers app

ViktorN said:
I have to say that the OP did a great job at providing the needed information. I wish everyone would describe their problems as good as the OP of this thread, it would make helping people out hell of a lot easier.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
So true !

Indeed. Not very often you can tell exactly where a problem is without having to ask for more info. In fact. A thanks to the op for providing a very detailed diagnosis without even having the device to hand
Sent from my HTC One X using xda app-developers app

[Q] Cannot update bootloader after relock the phone

Hi there,
I bought a new motherboard for my HTC One X - 16 GB and after download and install via OTA the new Android, I got stucked.
After trying to install all the stuff I found on the internet, I really got stucked and I cannot go on without getting back the official version (I just need to use my phone back, because it took 4 months to the motherboard to arrive here).
When I power on the phone, the HTC quietly brilliant appears and a red message too ("This version is for development and bla bla bla"). Then, it goes to the main screen, where it says:
"
*** RELOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.12.0000
CPDL-none
MICROP-none
RADIO-NONE
...
"
My CID is unknown now, I don't know why, but my original CID is HTCCN701.
I don't really know what to do. When I run "fastboot flash boot boot.img" with the RUU, it gives me error (batery low, even though I recharged it all night long or 000000008), and when I try it again, it runs for 20> minutes and say "too many connections".
If anyone have any tips for me, please just send it. I've waited a lot for this motherboard to arrive and now I can't use the phone. :/

FSCosta said:
Hi there,
I bought a new motherboard for my HTC One X - 16 GB and after download and install via OTA the new Android, I got stucked.
After trying to install all the stuff I found on the internet, I really got stucked and I cannot go on without getting back the official version (I just need to use my phone back, because it took 4 months to the motherboard to arrive here).
When I power on the phone, the HTC quietly brilliant appears and a red message too ("This version is for development and bla bla bla"). Then, it goes to the main screen, where it says:
"
*** RELOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.12.0000
CPDL-none
MICROP-none
RADIO-NONE
...
"
My CID is unknown now, I don't know why, but my original CID is HTCCN701.
I don't really know what to do. When I run "fastboot flash boot boot.img" with the RUU, it gives me error (batery low, even though I recharged it all night long or 000000008), and when I try it again, it runs for 20> minutes and say "too many connections".
If anyone have any tips for me, please just send it. I've waited a lot for this motherboard to arrive and now I can't use the phone. :/
Click to expand...
Click to collapse
unlock bootloader with same unlock_code
flash custom rom

Poojan Patel said:
unlock bootloader with same unlock_code
flash custom rom
Click to expand...
Click to collapse
I have already tried it, but it does not work. Now the phone says "battery low" and I can't even charge my cellphone, when I plug it on the usb or wall charger, it turns on and stays like this.
I already gone to FlashBoot and Power Down, but when I plug it again, it turns on and does not charge!
I'm lost... :/

Check my last reply
http://forum.xda-developers.com/showthread.php?t=2694020

Mr Hofs said:
Check my last reply
http://forum.xda-developers.com/showthread.php?t=2694020
Click to expand...
Click to collapse
Dude, you're the best. Your code worked here and I could unlock it again.

Poojan Patel said:
unlock bootloader with same unlock_code
flash custom rom
Click to expand...
Click to collapse
Could you help me with the flash custom rom? I really don't know what to use and what version.
I know for sure that I have to install one recovery and then the rom, but I'm newbie and I don't know exactly what to do.

Depends on what rom you want that's something you have to decide for yourself. If you made a decision on which one you want to try you can come back here

FSCosta said:
Could you help me with the flash custom rom? I really don't know what to use and what version.
I know for sure that I have to install one recovery and then the rom, but I'm newbie and I don't know exactly what to do.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1832891
check out all latest rom
and install whatever you like..

Mr Hofs said:
Depends on what rom you want that's something you have to decide for yourself. If you made a decision on which one you want to try you can come back here
Click to expand...
Click to collapse
Hey man, I've decided that I want to install this rom (the phone is already unlocked and I have a TWRT smooth instaled)
teamandroid.com/rom/slim-dragon-ultimate-rom-htc-one-x-android-4-2-2-jelly-bean/
But I don't know if my CID supports it (or if I'm talking ****), because I don't know if the hboot (v 1.12.0000) that is already installed supports it.
How can I know if this seed will work on my cellphone? My CID is HTCCN701, and my main version is 2.18.1407.3.
Can you help me?

No sense 5 roms and kitkat roms will not work, you need a higher hboot for that !
---------- Post added at 08:52 PM ---------- Previous post was at 08:50 PM ----------
Poojan Patel said:
http://forum.xda-developers.com/showthread.php?t=1832891
check out all latest rom
and install whatever you like..
Click to expand...
Click to collapse
Please check the facts first before you send a user into the woods.....hboot 1.12 does not support the latest roms.
@FSCosta do you have a stock backup ?

Mr Hofs said:
No sense 5 roms and kitkat roms will not work, you need a higher hboot for that !
---------- Post added at 08:52 PM ---------- Previous post was at 08:50 PM ----------
Please check the facts first before you send a user into the woods.....hboot 1.12 does not support the latest roms.
@FSCosta do you have a stock backup ?
Click to expand...
Click to collapse
Could you gently help me to install a higher hboot from the information I wrote above?

I'm looking....but it's a very rare software number. So we need a firmware or a stock backup

Mr Hofs said:
I'm looking....but it's a very rare software number. So we need a firmware or a stock backup
Click to expand...
Click to collapse
I have found this posts:
tomsawyer.me/325.html#.UzHgm_ldW2a (use translate, it's not the best translation but it's possivle to understand).
The version he claims to be is HBOOT is 1.36... What do you think about it?

Is that a website ?

Mr Hofs said:
Is that a website ?
Click to expand...
Click to collapse
Yes, I cannot send websites, so I removed the beginning!

yep downloaded it, i was still on my phone (now on laptop)....it seems genuine. all file sizes match oke. lets flash it
EDIT 1 : writing a tut now....make sure you start with a full battery !
EDIT 2 :
- Download the zip file and rename it to firmware.zip and place it in the fastboot folder on the pc
- Relock the bootloader with ths command :
fastboot oem lock
- Then type :
fastboot oem rebootRUU (watch the capital letters)
- Then type :
fastboot flash zip firmware.zip
Sometimes flashing for the first time doesn't work, so flash firmware.zip again if the outcome is not OKE
Then type fastboot reboot (the phone probably wont boot, hold the power button + vol down button to get back to the bootloader)
Once in the bootloader you check if th hboot has changed, if so you can unlock the bootloader and flash a custom recovery and also a new clean rom (yes any of your liking)

Mr Hofs said:
yep downloaded it, i was still on my phone (now on laptop)....it seems genuine. all file sizes match oke. lets flash it
Click to expand...
Click to collapse
Ok, I'll try it. Do you have any tutorial that I must follow? I've been looking for them but I'm not pretty sure which one must I use.
One I found said: rename the file to firmware.zip, relock the phone, reboot with RUU param (fastboot oem rebootRUU) and then install the firmware... is it ok?

refresh...i have written it out for you

Mr Hofs said:
refresh...i have written it out for you
Click to expand...
Click to collapse
Man, it has worked smooth! THANK YOU VERY MUCH.
I decided to install the VENOM viper X version...
They say: "MUST PERFORM FULL WIPE!!!!!
MUST FLASH BOOT.IMG IN ZIP!!!!!"
The steps I must take are:
Extract the Boot.IMG in the rar file to your fast boot folder
Set up phone in boot mode
Connect to PC
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Boot phone in recovery mode
Wipe data/factory reset
Wipe cache partition
Wipe dalvik cache
Install zip from SD card -> pick rom
Is i correct?
Thank you for patience. I really appreciate your efforts and time.

Yeah flash the boot.img and go into the recovery
Make indeed a full wipe (wipe all you can except sdcard) so that means caches, data, system.....
Install the rom.zip and the installer will start. Make sure you choose the option "update only" and the full rom install. Nice choice you won't regret it.
I can also recommend some nice themes which you can find in my signature
Edit :
Working recoveries
https://www.dropbox.com/s/yqzlpqo8illa53j/Philz recovery 5.15.9.img
Or
https://www.dropbox.com/s/7zxfzbwewzq6hmq/twrp-recovery2.img