Hello togehter,
i found this to-do-list:
1. Flash a ROM and boot image based on 1.26 (e.g ARHD 2.1)
2. Clear fastboot cache
Code:
fastboot clear cache
3. Boot your phone
4. Charge you phone completely
5. Download stock recovery
6. Flash stock recovery
Code:
fastboot flash recovery endeavoru_recovery_signed.img
7. Relock bootloader
Code:
fastboot oem lock
8. Run 1.26 RUU
Click to expand...
Click to collapse
so not that big deal at all. i got the vodafone 1.26 ruu
but i dont find i 1.26.x rom. could i doo this from a 1.29 rom too? normaly the ruu should override everthing right?
one x got wlan problems, signal jumping like hell, nothing helps (reboot, reflash, router reboot, other router...). SO back to stock for warrenty exchance.
greetings and thanks
Hello neighbour..xD
Should be no problem like you posted it, flash 1.29 and you are good to go..
thanks
downloading ruu... takes 2 hours. to premium @ filefactory^^
greetings
ah, just one more question
which recovery to flash?
stock 1.26 for 1,26 ruu right?
or 1.29 for running 1.29 rom in the back
greetings
This video might help...
bigoliver said:
This video might help...
Click to expand...
Click to collapse
That's a good guide, but btw...
Make sure your phone is AT LEAST 50% charge.
Because, during the updating process, it will not charge with the usb cable and therefore not going to charge the phone.
If it shuts off during updating, you cannot charge the phone even if it's off.
NitNav said:
That's a good guide, but btw...
Make sure your phone is AT LEAST 50% charge.
Because, during the updating process, it will not charge with the usb cable and therefore not going to charge the phone.
If it shuts off during updating, you cannot charge the phone even if it's off.
Click to expand...
Click to collapse
Good advice, you should always flash with plenty of battery.
Sent from my HTC Desire using xda premium
holy.......
RUU won't run
i think its because the blank cid number.
what RUU will work? device just boot in fastbook mode, nothing else possible now
greetings and HELP
Havoc2k said:
holy.......
RUU won't run
i think its because the blank cid number.
what RUU will work? device just boot in fastbook mode, nothing else possible now
greetings and HELP
Click to expand...
Click to collapse
I had this problem, I was trying to flash the original rom that came with the phone, but, because I had, at some point, officially ota updated the software I needed to revert back to the updated software. Hope this helps,
Oliver
Sent from my HTC Desire using xda premium
sy i dont get the point.
so what to do?
phone was running at 1.29.xx (latest FW from htc)
ruu is for 1.26.xx
recovery img is 1.26 too
can't flash anything right now cause the phone is relocked now
greetings
edit: fault msg:
Error [131] CUSTOMER ID ERROR
The ROM Update Utility cannot update your Android phone
please get the correct rom update utility and try again.
Click to expand...
Click to collapse
so its because the CID, but hmm what to do now :/
greetings
Havoc2k said:
sy i dont get the point.
so what to do?
phone was running at 1.29.xx (latest FW from htc)
ruu is for 1.26.xx
recovery img is 1.26 too
can't flash anything right now cause the phone is relocked now
greetings
Click to expand...
Click to collapse
When RUU 1.26 didn't work for me I tried RUU 1.28 (latest three branded RUU) And that worked.
I think you might be trying to flash the wrong RUU you need the latest version of your RUU that you have previously ran on your phone.
It sounds to me from your posts that you need the 1.29 RUU but it's your responsibility to make sure you use the correct RUU.
Sent from my HTC Desire using xda premium
Related
I wanted to flash LeeDroid's rom. After I flashed the boot image I realized that I haven't put the rom into the root of the phone's storage! silly me. I tried rebooting the system but it won't boot. Then I tried the unbrick methods on the forum but found no luck. At last I tried relocking it and restore it using RUU but it still won't work! It is saying that I got the wrong version of RUU, but where can i find the RUU for 1.28? Hope someone can help!!
chowdyg said:
I wanted to flash LeeDroid's rom. After I flashed the boot image I realized that I haven't put the rom into the root of the phone's storage! silly me. I tried rebooting the system but it won't boot. Then I tried the unbrick methods on the forum but found no luck. At last I tried relocking it and restore it using RUU but it still won't work! It is saying that I got the wrong version of RUU, but where can i find the RUU for 1.28? Hope someone can help!!
Click to expand...
Click to collapse
What country are you in, which network are you on and did you buy your phone sim free?
If you go into fastboot mode and then boot into CWM using the command:
fastboot boot <CWM img file>.img
You'll then be able to use adb to push the rom zip onto your device which you can then flash with CWM.
If the RUU says you have the wrong version you probably have the RUU for another region/carrier.
It's pretty much impossible to permanently brick the one x (without s-off) so don't worry, you'll get it working eventually.
Thanks man. I am in Hong Kong and i am pretty sure it is sim free. after I tried running the RUU i have relocked the bootloader. for some reason I can't even get into recovery right now! When I try the RUU it saids the image version is 1.28.708.10 and I get error140
chowdyg said:
Thanks man. I am in Hong Kong and i am pretty sure it is sim free. after I tried running the RUU i have relocked the bootloader. for some reason I can't even get into recovery right now! When I try the RUU it saids the image version is 1.28.708.10 and I get error140
Click to expand...
Click to collapse
Which RUU did you download?
rogersnm said:
Which RUU did you download?
Click to expand...
Click to collapse
RUU_ENDEAVOR_U_ICS_40_hTC_Asia_HK_1.26.708.2
I guess it is not the right one is it
chowdyg said:
RUU_ENDEAVOR_U_ICS_40_hTC_Asia_HK_1.26.708.2
I guess it is not the right one is it
Click to expand...
Click to collapse
You can't install the 1.26 RUU after you've updated hboot with the 1.28 OTA.
Try installing this RUU: http://hoxroms.serveftp.com/RUU_END...Radio_1.1204.103.14_release_257077_signed.exe, it's the same region but a newer version.
Flash the stock 1.28 recovery image and relock your bootloader before trying to install the RUU.
The 1.28 recovery image can be found here: http://hoxroms.serveftp.com/Asia_1.28_RUU/recovery_signed.img
rogersnm said:
You can't install the 1.26 RUU after you've updated hboot with the 1.28 OTA.
Try installing this RUU: http://hoxroms.serveftp.com/RUU_END...Radio_1.1204.103.14_release_257077_signed.exe, it's the same region but a newer version.
Flash the stock 1.28 recovery image and relock your bootloader before trying to install the RUU.
The 1.28 recovery image can be found here: http://hoxroms.serveftp.com/Asia_1.28_RUU/recovery_signed.img
Click to expand...
Click to collapse
Thanks so much!!
but i have already relocked the bootloader without flashing the recovery image ... would that make a difference?
If the RUU runs successfully then don't worry about it, if it throws another error then flash the stock recovery and try again.
rogersnm said:
If the RUU runs successfully then don't worry about it, if it throws another error then flash the stock recovery and try again.
Click to expand...
Click to collapse
Thanks again. but how do i do it with the bootloader locked
chowdyg said:
Thanks again. but how do i do it with the bootloader locked
Click to expand...
Click to collapse
Just unlock it by running "fastboot flash unlocktoken Unlock_code.bin" like you did before and then relock it after
rogersnm said:
Just unlock it by running "fastboot flash unlocktoken Unlock_code.bin" like you did before and then relock it after
Click to expand...
Click to collapse
now it is saying error 170. whenever i try to flash something it just says waiting for device
chowdyg said:
now it is saying error 170. whenever i try to flash something it just says waiting for device
Click to expand...
Click to collapse
Disconnect and reconnect your phone, reboot your phone and your pc, try again.
ps. Make sure you relocked your bootloader
rogersnm said:
Disconnect and reconnect your phone, reboot your phone and your pc, try again.
ps. Make sure you relocked your bootloader
Click to expand...
Click to collapse
Thank you so much!! problem solved!!
So i somehow went hiroshima on my one x. I'll keep it short and simple. Had my BL unlocked but was running CWM recovery and the stock rom. Tried installing the cyanogenmod 9 and things went to hell after i flashed the boot.img. Now I am stuck at the white HTC screen. I read the disaster recovery but I am still having no luck. I relocked the bootloader and reflashed stock recovery then i tried using the ruu utility but it said that it didnt match and then rebooted with some developer text on the boot screen. I used the getvar command and it says:
version-main: 1.28.720.10
Before the blowup I had ran the OTA.I was on 1.26.720.10. This is the ruu i tried to reflash. I cant seem to find the 1.28.720.10. I also tried pulling the sys and boot img files from the temp directory and manually flashing, it gave an error.
as of right now i have the bootloader unlocked again and CWM recovery reinstalled so i can charge.
please help! $20 reward via paypal to the person that helps me get back to complete stock!
The worst part is i dont even want this damn phone...lol
Try this mate. If you can still get to bootloader and recovery it recoverable. I'd go back to stock so its as if you bought the phone, just to be safe. So...
Open cmd and CD to your fastboot file location. Plug phone in and...
First flash a stock boot.img from your stock.zip
fastboot flash boot boot.img
fastboot reboot-bootloader
fastboot erase cache
Then relock your bootloader.
fastboot oem lock
fastboot reboot-bootloader
fastboot erase cache
Then run the RUU.
But make sure you have the correct one. So that includes region. If you started on 1.26 and you haven't done any OTA updates then you need 1.26 but with your region code.
Good luck!
Sent from my HTC One X using xda premium
i did do the ota to 1.28 before i blew it up. also, how do i find the right region code? WHen i searched google for the results of my getvar version-main i found a bunch of threads referring to that being the ota for india, so thats the ruu i downloaded from the fileshare. i was working off a hunch though.
Will I be able to use a 1.26 RUU if I updated to 1.28, seeeing as how my getvar says 1.28?
applejoos said:
i did do the ota to 1.28 before i blew it up. also, how do i find the right region code? WHen i searched google for the results of my getvar version-main i found a bunch of threads referring to that being the ota for india, so thats the ruu i downloaded from the fileshare. i was working off a hunch though.
Will I be able to use a 1.26 RUU if I updated to 1.28, seeeing as how my getvar says 1.28?
Click to expand...
Click to collapse
Yeah if you did the OTA you need to use the 1.28 RUU as your hboot will have updated along with either things so 1.26 won't work.
Sent from my HTC One X using xda premium
benjamin.j.goodwin said:
Yeah if you did the OTA you need to use the 1.28 RUU as your hboot will have updated along with either things so 1.26 won't work.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
So since there is no RUU matching my version number I am screwed now right?
Use the 1.29 ruu?
backfromthestorm said:
Use the 1.29 ruu?
Click to expand...
Click to collapse
there is no 1.29 for my region code.
applejoos said:
So since there is no RUU matching my version number I am screwed now right?
Click to expand...
Click to collapse
Do you know how to push a ROM.zip on to your SD card via command prompt?
Try downloading a custom ROM and flash the boot.img then, clear cache, then boot to recovery and flash the ROM. Then reboot. Should work.
Sent from my HTC One X using xda premium
Hi Guys, I've been using Custom Roms a long time so It came... Jelly Beans finally.
I tried to go back to stock...basically I installed a NANDROID compatible with my system...everything went fine till the last update JB...
I downloaded it...OK ,
After INSTALL NOW...It reboots the phone to install...After that, shows a message and go back to BOOTLOADER...I cannot see well the message... What can I do?? It's driving me crazy
Logo HTC and this message...after that...goes back to bootloader...What Happened??
QUOTE
"This build if for development purposes only
do not distribute ourside of HTC
without HTC a writter permission
Failure to comply may
lead to legal action"
blankfile99 said:
Hi Guys, I've been using Custom Roms a long time so It came... Jelly Beans finally.
I tried to go back to stock...basically I installed a NANDROID compatible with my system...everything went fine till the last update JB...
I downloaded it...OK ,
After INSTALL NOW...It reboots the phone to install...After that, shows a message and go back to BOOTLOADER...I cannot see well the message... What can I do?? It's driving me crazy
Logo HTC and this message...after that...goes back to bootloader...What Happened??
QUOTE
"This build if for development purposes only
do not distribute ourside of HTC
without HTC a writter permission
Failure to comply may
lead to legal action"
Click to expand...
Click to collapse
you installed an OTA?
I'm using a Stock from a recovery Nandroid, not mine but the same CID 044... I guess I shold go back to RUU...but I've tried without any success
I can't even use my RUU file...donno why... I have this file: (RUU_ENDEAVOR_U_ICS_40_hTC_Asia_WWE_1.29.707.11_Radio_1.1204.105.14_release_260743_signed) and It works, not now but It used it once...do you have a suggestion so I can use it again??
blankfile99 said:
I can't even use my RUU file...donno why... I have this file: (RUU_ENDEAVOR_U_ICS_40_hTC_Asia_WWE_1.29.707.11_Radio_1.1204.105.14_release_260743_signed) and It works, not now but It used it once...do you have a suggestion so I can use it again??
Click to expand...
Click to collapse
you are on JB now and you can't run ICS RUUs, you can't downgrade...
matt95 said:
you are on JB now and you can't run ICS RUUs, you can't downgrade...
Click to expand...
Click to collapse
I'm not...I'm on 2.17 yet...JB update does not install...that's the main problem
and I have noticed that NO MATTER I CHANGE...IT WONT CHANGE THIS VERSION... OMG
tks man!
You need to relock your bootloader (if you haven't already) and run THIS RUU.
The problem is that the version of software you're running (2.17) is newer than the RUU you're trying to install (1.29). you can't revert to an older RUU. you can only flash the same version or newer.
Once you've flashed the RUU, you'll be able to download and install the JB OTA.
Sentinel196 said:
You need to relock your bootloader (if you haven't already) and run THIS RUU.
The problem is that the version of software you're running (2.17) is newer than the RUU you're trying to install (1.29). you can't revert to an older RUU. you can only flash the same version or newer.
Once you've flashed the RUU, you'll be able to download and install the JB OTA.
Click to expand...
Click to collapse
Thank you very much man, You renew my faith!!
It will work like a FORMAT SYSTEM with the same Rom?
I'll keep in touch!!
Also, this may sound silly but did you reflash stock RECOVERY?
blankfile99 said:
Thank you very much man, You renew my faith!!
It will work like a FORMAT SYSTEM with the same Rom?
I'll keep in touch!!
Click to expand...
Click to collapse
No worries, let us know how you go, and don't forget the Thanks button.
ArmedandDangerous said:
Also, this may sound silly but did you reflash stock RECOVERY?
Click to expand...
Click to collapse
You don't need stock recovery to flash an RUU. You just need a locked or relocked bootloader, and a less or equal main-version.
Once you run an RUU, you will have stock everything(including recovery) and will be able to install whatever OTAs are available.
Well I am currently running Team Venom's Viper but I have HBOOT 1.31. My device's CID is HTC_J15.
I have checked the list of RUUs but unfortunately all of them are older than the version I need, which has to be 3+.
Does anybody know if there's an RUU available for my device? It is an ubranded WWE version, 401 if I remember correctly.
ArmedandDangerous said:
Also, this may sound silly but did you reflash stock RECOVERY?
Click to expand...
Click to collapse
I'm using the same as the NANDROID, taken from it...right?
Sentinel196 said:
No worries, let us know how you go, and don't forget the Thanks button.
You don't need stock recovery to flash an RUU. You just need a locked or relocked bootloader, and a less or equal main-version.
Once you run an RUU, you will have stock everything(including recovery) and will be able to install whatever OTAs are available.
Click to expand...
Click to collapse
That's all I need... I'll give my feedback later.
Sentinel196 said:
No worries, let us know how you go, and don't forget the Thanks button.
You don't need stock recovery to flash an RUU. You just need a locked or relocked bootloader, and a less or equal main-version.
Once you run an RUU, you will have stock everything(including recovery) and will be able to install whatever OTAs are available.
Click to expand...
Click to collapse
In my experience the 2.17.707.xx RUU Asia WWE does not work properly. It does its thing installing everything, relocks the bootloader but somehow it does not reflash the recovery. After 4 hours trying everything under the sun, I gave up and looked for a nandroid of 2.17 for CID_044 and restored from that, reflashed stock recovery and went to town with the OTA.
That's very strange, no such problem when I did the same thing. You'd think it would throw an error or something if a component of the image failed to flash.
Glad you managed to figure it out!
Did you run it when your bootloader was unlocked? Maybe that's the problem? I ran it with the bootloader relocked and didn't ahve any problems. I was under the impression you couldn't run an RUU with an unlocked bootloader, but haven't tried it myself.
Refer custom to stock thread posted earlier. Go through step by step procedure. It will help u to be on stock Rom. After that flash any Rom suitable to your CID only
http://forum.xda-developers.com/showthread.php?t=1859714
Hit Thanks if u like.
Sent from my HTC One X using xda app-developers app
Got It guys!!
What I did... NOTHING else...
Only Reboot the phone...wait to initialize completely, then reboot again, when came a little update about 1.25mb...installed and reboot...after that...JB update installed correctly.
If someone else needs...Someone like me who relocked the phone waiting for JB and Has problems
1. Unlock Phone
2. fastboot flash recovery recovery.img (from nandroid 2.17)
3. fastboot flash boot boot.img (from nandroid 2.17)
4. fastboot erase cache
5. restart bootloader (I like to do this way)
6. Install RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed on windows
7. Wait to boot completely, then restart phone.
8. Update Software ...a little update came before JB. (about 1.25mb)
9 Reboot phone.
10. Update Software... finally to JB.
Thanks guys!
Sentinel196 said:
That's very strange, no such problem when I did the same thing. You'd think it would throw an error or something if a component of the image failed to flash.
Glad you managed to figure it out!
Did you run it when your bootloader was unlocked? Maybe that's the problem? I ran it with the bootloader relocked and didn't ahve any problems. I was under the impression you couldn't run an RUU with an unlocked bootloader, but haven't tried it myself.
Click to expand...
Click to collapse
The RUU ran with no problem, and it relocked my bootloader, but it still did not receive any OTAs. So I had no choice but to do a nandroid restore instead (recommended anyway )
I'm going to update my htc one x to jelly bean from ICS, using custom ROM (ARHD), it was noted that I need a firmware package, and now that I found the package for my CID because took sometime before I found it, is it really required to flash it? TIA
For JB roms you need a JB hboot those are the 1.31 and higher up. Except for the aosp JB roms, those run also on the lower ics hboots.
So if you are on a lower hboot then 1.31 then yes you need to upgrade the hboot
Now I think everything's messed up and I badly need help here, so stupid with I did.
At one moment, my phone is stuck at One tm screen, after I flash the boot.img and installed the custom ROM. I tried to restore my phone using CWM but it still stucked. It was too late before I realized how to flash the firmware package that I need to rename what I downloaded to firmware.zip. I tried flashing the firmware without knowing that I have to relocked my phone before I flash it. Now I relocked my phone and I'm stucked with hboot and I can't do anything at the moment.
With it relocked. In fastboot do
fastboot oem rebootRUU (note the capitals)
Your phone will then reboot into a black screen with the HTC logo.
Then do fastboot flash zip firmware.zip
Once completed fastboot reboot-bootloader
It will reboot into bootloader
Then unlock and flash recovery again.
Flash boot image and reinstall ROM and you should be good to go
Sent from my HTC One X using xda app-developers app
bagofcrap24 said:
With it relocked. In fastboot do
fastboot oem rebootRUU (note the capitals)
Your phone will then reboot into a black screen with the HTC logo.
Then do fastboot flash zip firmware.zipOnce completed fastboot reboot-bootloader
It will reboot into bootloader
Then unlock and flash recovery again.
Flash boot image and reinstall ROM and you should be good to go
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Cannot load "firmware.zip" always shows up. My CID is HTC_044, and as far as I know I downloaded the correct firmware package for my phone according to ARHD forum. Thanks in advance.
Did you have the firmware.zip in your fastboot folder?
Yes. And I downloaded it 3 times just to make sure it is the right firmware.
Oh and sometimes you need to flash it 3 or 4 times to succeed. I had to do the command 3 times when I flashed my firmware.
So try it multiple times in a row.
Sent from my One X
Sorry but I tried several times and "error: cannot load 'firmware.zip' all the time. What could be the problem?
During at work. I thought if is it possible just to return to stock ROM? But I just can't find the proper RUU yet.
cid: htc_044
version-main: 1.29.707.11
I'm currently charging my phone using the batch file I found here in xda. I saw a lot of posts regarding flashing the current version of CWM so you can charge your battery, I think my CWM is in version 5.8.1.0, and as far as I know you have to unlock your hboot before you can flash recovery, so it's impossible for me to flash 5.8.4.0? Am I correct here or I can just proceed to the other steps?
I can check tonight if i have your RUU !
Mr Hofs said:
I can check tonight if i have your RUU !
Click to expand...
Click to collapse
Thank you Mr Hofs! And, should my battery level is 30% or higher before I can flash the RUU?
Yes ! If you can't get enough power with the batt script you can flash the latest cwm recovery and charge the battery in there to 100% if you want to.
Unlock the bootloader first if it is still locked
Mr Hofs said:
Yes ! If you can't get enough power with the batt script you can flash the latest cwm recovery and charge the battery in there to 100% if you want to.
Unlock the bootloader first if it is still locked
Click to expand...
Click to collapse
I was done in re-unlocking my bootloader, but then I still can't flash cwm recovery because it says low battery, then I tried to use the batt script again and of course it cannot work since I just re-unlocked my bootloader.
I never tried it with a unlocked bootloader, have you tried it ?
Yes, I tried it and it doesn't work.
What I did for the past hours, I tried to restore my phone again using cwm recovery, still nothing changed, still stucked at htc one logo, then I turned it off trying to charge it using the main charger and it does have light in its LED, left it for a while and now it doesn't turn on.
Try it with phone connected to the pc, it seems to make a difference sometimes....and if you are capable again to run the bat script then leave it for 2.hours or so !
Now it's working. The first time I used the batt script, I thought it could charge more than 3681mV but It didn't work as it didn't get higher than 3681mV. I HOPE it's enough just to flash the cwm recovery. Thanks Mr Hofs, will update asap.
I got a slight issue with my htc one x. My phone was switching off by itself anytime it wanted, so I decided to unroot it and send it back to vodafone. I did follow Video " Unroot the htc one x :back to stock. Cursed4Eva" and did exactely what was said till applying RUU., my pc cant conect to my phone in bootloader mode, so I am stuck now with relocked phone....
Hboot 1.36
Firmware 4.1.1
Is there any other way how to install RUU???
korkis said:
I got a slight issue with my htc one x. My phone was switching off by itself anytime it wanted, so I decided to unroot it and send it back to vodafone. I did follow Video " Unroot the htc one x :back to stock. Cursed4Eva" and did exactely what was said till applying RUU., my pc cant conect to my phone in bootloader mode, so I am stuck now with relocked phone....
Hboot 1.36
Firmware 4.1.1
Is there any other way how to install RUU???
Click to expand...
Click to collapse
Is your phone recognized by the PC in fastboot?
matt95 said:
Is your phone recognized by the PC in fastboot?
Click to expand...
Click to collapse
Well when i conect usb cabel, phone says fastboot usb, but when i try to run ruu , phone has not found...
Hope, that is what u asked, coz i am still an android newbie
So is here anyone who could help me out????
korkis said:
So is here anyone who could help me out????
Click to expand...
Click to collapse
Have you installed the proper drivers on your PC?
Before installing RUU, try the command "fastboot devices" to see if it's recognizing your device.
Edit: You'll have to do that from a folder with fastboot in it or you have to have fastboot in your PATH info.
webpatrick said:
Have you installed the proper drivers on your PC?
Before installing RUU, try the command "fastboot devices" to see if it's recognizing your device.
Edit: You'll have to do that from a folder with fastboot in it or you have to have fastboot in your PATH info.
Click to expand...
Click to collapse
When I type fastboot devices this one appears : SH256W104119 Fastboot
korkis said:
When I type fastboot devices this one appears : SH256W104119 Fastboot
Click to expand...
Click to collapse
Looks like you are connected, so I don't know why the RUU cannot find your device.
I have tried it again, and Ruu found my phone, but bootloader error appeared:
The ROM update utility cannot update your android phone. Please get the correct ROM update utility and try again...
Any ideas where to get the corect one for vodafone UK???
webpatrick said:
Looks like you are connected, so I don't know why the RUU cannot find your device.
Click to expand...
Click to collapse
I can't find the appropriate RUU anywhere..... Is there any possibility to downgrade my phone from that state as it is now????
korkis said:
I can't find the appropriate RUU anywhere..... Is there any possibility to downgrade my phone from that state as it is now????
Click to expand...
Click to collapse
This thread might help.
http://forum.xda-developers.com/showthread.php?t=2135632
columbo67 said:
This thread might help.
http://forum.xda-developers.com/showthread.php?t=2135632
Click to expand...
Click to collapse
Yeah, but actually this one still seems like doesnt sort out my issue, I did find the right nandroid backup and I would flash it in recovery if I had any..
Don't forget that right at the beginning I was about to go for stock Rom, so I did flash stock recovery and I locked the bootloader.... So the question now is if I can flash again some recovery (which one) while my bootloader is relocked. Or should I go ahead and do relock the bootloader again and than flash recovery...? Sorry but I am still a bit lost, and I dont wanna my HOX to become a brick.... Thx
korkis said:
Yeah, but actually this one still seems like doesnt sort out my issue, I did find the right nandroid backup and I would flash it in recovery if I had any..
Don't forget that right at the beginning I was about to go for stock Rom, so I did flash stock recovery and I locked the bootloader.... So the question now is if I can flash again some recovery (which one) while my bootloader is relocked. Or should I go ahead and do relock the bootloader again and than flash recovery...? Sorry but I am still a bit lost, and I dont wanna my HOX to become a brick.... Thx
Click to expand...
Click to collapse
Looks like you can't go back to stock, there is no RUU, no nandroid backup.
You could still ask if somebody is willing to post a nandroid backup for your CID and version, and in the meanwhile you can unlock your bootloader again, flash a custom recovery and flash a ROM (+boot.img) of your choice that fits your hboot version.
webpatrick said:
Looks like you can't go back to stock, there is no RUU, no nandroid backup.
You could still ask if somebody is willing to post a nandroid backup for your CID and version, and in the meanwhile you can unlock your bootloader again, flash a custom recovery and flash a ROM (+boot.img) of your choice that fits your hboot version.
Click to expand...
Click to collapse
Thanks buddy, my phone is now sorted, back to stock and in case of anything I got 2.17 , 3.14 and also 4.17. Nandroid backups I really appreciate ur help