Develop Bugs

Diamond 3G Radio not working after ROM flash

I am hoping one of you bright lights on here can help me with this problem I've been having.
I have a HTC Diamond US 3G version. I purchased it unlocked, and recently flashed over the stock 1.93 ROM to one of the EnergyROM series. I had the usual problem of repeating hard resets because I didn't do a mtty.
So now I've done the mtty, and flashed with a stock 2.03 ROM and done a bunch of tweaking and reflashing. I'm currently using the Gen Y D2 R2 rev Y ROM. One problem that I haven't gotten to go away is that my 3G radio no longer works.
I can use my phone just fine (including data) when its set to GSM network mode, and automatic band selection. But when I change the network type to Auto, or WCDMA, i drop my cellular connection and nothing works. This has been going on for a month, I've gone through many different radios and ROMs and settings. I've gotten Rogers (my provider in Canada) to reset my network profile multiple times.
I would greatly appreciate any help that someone on here could give as I'd love to get back my 3G/HSPA capabilities!

shameless bump

You probably tried this but just in case you overlooked it.. Did you select 3G from your comm manager? There's a switch that you can toggle to switch between 3G on and off.

Have you tried other Radios?
Hi,
Some ROMS work better with different RADIO versions... You can either check witch radio is best for your current ROM or try one of the latest Diamond Radios in the following list:
showthread.php?t=470306
I'm using v1.09.25.23 and it works fine with my current ROM (netDrg 2.8) and had no problem with EnergyROM!
Hope this help!

Thanks for the help.
Yes when i turn on 3G, either on 'auto' mode or on WCDMA mode my phone gets dropped from the network.
Also I have tried many different RADIOs, and two ROMs now.

mikethewolf said:
Thanks for the help.
Yes when i turn on 3G, either on 'auto' mode or on WCDMA mode my phone gets dropped from the network.
Also I have tried many different RADIOs, and two ROMs now.
Click to expand...
Click to collapse
Some ROM can work out-of-the-box, other one you must try the combo of radio and rilphone. In your case you can search after rilphone and try Raphael rilphone or Blackstone. Raphael is better compatible with Diamond. Btw. I assume you already know your radio must support GSM850 (better use the one radio supported quad-band, you can always try the base radio first 1.00.25.05!)

gsmdb said:
Some ROM can work out-of-the-box, other one you must try the combo of radio and rilphone. In your case you can search after rilphone and try Raphael rilphone or Blackstone. Raphael is better compatible with Diamond. Btw. I assume you already know your radio must support GSM850 (better use the one radio supported quad-band, you can always try the base radio first 1.00.25.05!)
Click to expand...
Click to collapse
Sadly I've tried alot of this as well
I have tried these radios;
1.00.25.05
1.00.25.06
1.14.25.05
1.00.25.08
1.09.25.23 (current)
I have also tried to use the Rogers rilphone.dll with my current radio, installed via Captain_Throwback's cab (http://forum.xda-developers.com/showthread.php?t=465419)
Should I be trying additional rilphones.dll?
Is it possibe that I broke my 3G by flashing a ROM? If I go back to my original stock ROM will i get it back?

sadly nobody has any other ideas?

mikethewolf said:
sadly nobody has any other ideas?
Click to expand...
Click to collapse
Try to rollback.. Reflash original ROM and keep your current radio. If 3G works then it's because of the other ROM you flashed. If it doesnt work after flashing original ROM, flash original radio. If it still doesnt work (hopefully it will) I think something would be wrong with your hardware then.

Maybe the ROM has hardset the WCDMA freq., like I do in mine.
Try changing this to AUTO in Settings --> Phone
OR Try flashing a radio, and afterwards install the corresponding rilphone.dll

no 3g in leedroid v2.3d

Hi, I recently flashed leedroid v2.3d and the radio provided. Still, I am unable to connect to mobile internet (I disabled wifi, which works normally).
I am using the GSM version and my operator is Starhub, Singapore. I have no 3g problems when using other ROMs. Does anyone have any idea on why this is not working for me?

Could be the rom itself. Go ask the dev team or ask in the actual rom thread.
Sent from CM7

Change the Radio. The radio you installed with that rom might be messing with your radio capabilities and you should try and find a reliable/stable radio release and flash that before installing your ROMs

Aegishua said:
Change the Radio. The radio you installed with that rom might be messing with your radio capabilities and you should try and find a reliable/stable radio release and flash that before installing your ROMs
Click to expand...
Click to collapse
I used the radio provided in the Leedroid post. Is there any other radio that I should use instead?
32.54.00.32U_5.14.05.17 <-- This is the radio version I am using.

Make sure your APN is setup for your service provider.

Grobiedeb said:
Make sure your APN is setup for your service provider.
Click to expand...
Click to collapse
Weird, my APN is empty. I tried restoring to default but it is still empty. How do I add APNs? There are soo many fields.
EDIT: NVM, I solved it through google. Thanks!

re-locking for activation?

My droid incredible 1 fried out completely so I bought an incredible 2 from a friend, he was running cm9 on it with an unlocked bootloader.
I understand I can't activate the phone until I relock it,
I've read a lot on how to do it but feel like I'm doing something wrong, on top of that no matter how hard I look I can't get the phone to connect to adb through usb, I've tried every driver I can find and on top of that most multiupload links are not working at all which makes following previous guides nearly impossible.
I'm going to be on a long car ride in a couple of days, my friend says he can probably fix it but he's busy until after I leave, could anyone give me some help here?
I have downloaded this rom (can't post link because of forum rules -_-)
which is RUU Version: 5.10.605.9
Radio Version: 1.09.01.1111
Android Version: 2.3.4
Signed: Yes
but running it didn't change me from CM9 to stock rom either anyways. I connected adb through wifi but can't fasboot flash boot boot.img through wifi apparently -_- it just keeps saying waiting for device.

I'm not sure where you heard that you can't activate it unless you relock. Just dial *228 hit send and select option 1 then follow the instructions.
Sent from my ICS Dinc2

On getting the computer to connect to the DI2, try uninstalling all HTC/USB drivers, reboot & then install the correct HTC driver only, ignore & get rid of anything relating to Verizon - turn off firewall & antivirus as often recommended ( disconnect broadband access if necessary to isolate your system from outside hazards)
Did you do a Master Reset from the phone? Try dialing *22890 or *22891 to bypass the prompt to keypad in the 1 for programming/activation and 2 for updating roaming capabilities.
Fastboot on the DI2 should be turned off (un-click the checkmark box from the submenu within settings) and make sure install for "Unknown" Apps is enabled. Power down (not restart) the phone & reboot - try connect via adb again.
Check your micro-usb cable or try a different one and/or try using a different PC to run adb if still no luck.
Usually, if adB doesn't see the device, it meant that drivers aren't installed & thus it is not seen or connecting.
Lastly, there is absolutely NO reason to unroot & relock the bootloader or load/flash the RUU to activate the phone running custom Roms, we have 2 DI2 and done the *228 update numerous times with no problems whatsoever.
It is possible that the security (I think it's called the A "key" from the Window Mobile device days - might be corrupted & need to be reset by VZW) - if you still cannot get it working, just call VZW on a different line and get tech support for smartphone, explain the situation (without telling them you are running a custom ROM - they will walk you thru and reset the phone settings on their end & OTA) and get it restored. You will not lose root.
Let us know if you succeed & good luck !

Z3R0115 said:
I have downloaded this rom (can't post link because of forum rules -_-)
which is RUU Version: 5.10.605.9
Radio Version: 1.09.01.1111
Android Version: 2.3.4
Signed: Yes
but running it didn't change me from CM9 to stock rom either anyways. I connected adb through wifi but can't fasboot flash boot boot.img through wifi apparently -_- it just keeps saying waiting for device.
Click to expand...
Click to collapse
Are you sure you want to flash over wifi?? Sounds dangerous.
Btw, do you think his issue may be related to the radio version? I had a similar issue and after setting the MainVerLOW, the RUU worked great.

Letitride said:
Check your micro-usb cable or try a different one and/or try using a different PC to run adb if still no luck.
Let us know if you succeed & good luck !
Click to expand...
Click to collapse
agapedisciple said:
Are you sure you want to flash over wifi?? Btw, do you think his issue may be related to the radio version? I had a similar issue and after setting the MainVerLOW, the RUU worked great.
Click to expand...
Click to collapse
Do not, repeat do NOT flash over WiFi - use a microUSB cable for a direct connection ...
All of my roms & flashes are done with the .1111 radio - although one can try the older .312 radio

Letitride said:
Do not, repeat do NOT flash over WiFi - use a microUSB cable for a direct connection ...
All of my roms & flashes are done with the .1111 radio - although one can try the older .312 radio
Click to expand...
Click to collapse
.0312 is the newer radio, there's an even newer one out now (.0320).
Sent from my Incredible 2 using Tapatalk 2

[Q] no cell service on cm7

Hi all I have just registered on xda but i'm using it from quite a while.
I'm using htc wildfire bought from my friend fresh from box it was in Era operator currently t-mobile. My operator is Orange. I was using my phone with stock rom for about 10months and decided to root it and flash custom rom. I used guide from this site and after bricking it second attempt was successful. So I was using CM7 installing apps and all over. And now i have really serious problem. My phone tells me there is no service.
What I done trying to repair:
Changing 2g to 3g and back.
Restart
Factory reset from menu
Factory reset from CWM
Battery pull
dialing *#*#4636#*#*
re flashing radio
Installing newer version of CM7
Some of methods seems to work for about 1-3days. But now none of them is working...
Please help

Groofy said:
Some of methods seems to work for about 1-3days. But now none of them is working...
Please help
Click to expand...
Click to collapse
which method seem to work temporarily? What radio do you currently have? Did you try to flash a different radio? (you could find radios here: [REF/GUIDE] [29/07] The Complete Wildfire Index - xda-developers)

eventcom said:
which method seem to work temporarily? What radio do you currently have? Did you try to flash a different radio? (you could find radios here: [REF/GUIDE] [29/07] The Complete Wildfire Index - xda-developers)
Click to expand...
Click to collapse
Ok thanks for really fast reply.
temporarily seem to work factory reset. dialing *#*#... also seemed to work for some time.
My radio is Radio_13.55.55.24H_3.35.20.10 that one was original and i flashed the same version, but I'm not sure if this is the problem.
Now I'm using my old phone so sim card is good.
EDIT:
My wifi is not working. Possible reason: I was playing with reverse tethering and one method via wifi required to put wpa-suplicant or something like that. Maybe this file also corrupted rest of services? GPS works fine...

Groofy said:
Ok thanks for really fast reply.
temporarily seem to work factory reset. dialing *#*#... also seemed to work for some time.
My radio is Radio_13.55.55.24H_3.35.20.10 that one was original and i flashed the same version, but I'm not sure if this is the problem.
Now I'm using my old phone so sim card is good.
EDIT:
My wifi is not working. Possible reason: I was playing with reverse tethering and one method via wifi required to put wpa-suplicant or something like that. Maybe this file also corrupted rest of services? GPS works fine...
Click to expand...
Click to collapse
well, doesn't look to be the radio - but that's just guessing. Did you get those problems directly after rooting and installing CM7 or did it work initially?

eventcom said:
Did you get those problems directly after rooting and installing CM7 or did it work initially?
Click to expand...
Click to collapse
After rooting and installing CM7 everything was perfect that was about 4 months ago. Problems with cell service started when i changed my sim card to surf over internet, and then i used notification bar application 2g/3g to force 3g. And since then I have problems, somewhere i read there could be problem with sim connection. Now i'm using my htc without sim card and when i dial *#*#4636 in gsm disconnects: DATA State DcInactiveState disconnected with last try at 00:59 fail because No Error. And What I noticed when i wanted to change network type in this menu it was returning always to previous state... What is interesting my phone tells me that signal strength is: -79dBm 19asu.

Groofy said:
After rooting and installing CM7 everything was perfect that was about 4 months ago. Problems with cell service started when i changed my sim card to surf over internet, and then i used notification bar application 2g/3g to force 3g. And since then I have problems, somewhere i read there could be problem with sim connection. Now i'm using my htc without sim card and when i dial *#*#4636 in gsm disconnects: DATA State DcInactiveState disconnected with last try at 00:59 fail because No Error. And What I noticed when i wanted to change network type in this menu it was returning always to previous state... What is interesting my phone tells me that signal strength is: -79dBm 19asu.
Click to expand...
Click to collapse
i suggest to carefully check your APN settings and try out the different modes for mobile data (force wcdma might fail in some conditions if I'm correct - check prefer and the other modes, too, if they'll do)
Swyped from my HTC Wildfire (Buzz)

eventcom said:
i suggest to carefully check your APN settings and try out the different modes for mobile data (force wcdma might fail in some conditions if I'm correct - check prefer and the other modes, too, if they'll do)
Swyped from my HTC Wildfire (Buzz)
Click to expand...
Click to collapse
APN settings are correct. I checked them on orange site, on many forums and tried them all. Currently my phone runs wdcma preffered. Now i'm about 20-30m from the transmitter. And still "no cervice". Any other ideas? Somebody told me to install stock rom and then install cm7 on it. But i have no idea how to do it. I can't remember i wrote this before but wifi is working. Sim card is good but i'm using it on nokia 6030. I tried even to put some paper to push harder sim card to better contact and no result.

Hmm, so if you double checked the apn settings and you did activate data in settings/network& wireless and if the SIM seems to be ok it's indeed a good idea to flash a different radio... look at the index thread linked above - all the files and information there. Try the radio that ends with 18.25 (bear in mind to use clockworkmod 2.5.x for flashing).
If that still doesn't work, just flash the current one again to see if that will do (radio problems usually are caused by the missing possibility to wipe or format the radio partition itself).
Crossing fingers
Swyped from my HTC Wildfire (Buzz)

eventcom said:
Hmm, so if you double checked the apn settings and you did activate data in settings/network& wireless and if the SIM seems to be ok it's indeed a good idea to flash a different radio... look at the index thread linked above - all the files and information there. Try the radio that ends with 18.25 (bear in mind to use clockworkmod 2.5.x for flashing).
If that still doesn't work, just flash the current one again to see if that will do (radio problems usually are caused by the missing possibility to wipe or format the radio partition itself).
Crossing fingers
Swyped from my HTC Wildfire (Buzz)
Click to expand...
Click to collapse
Sorry still no result.
Hope you have more ideas...

Have you tried to restore the backup of your stock rom with the new sim?
This may solve the problems associated with Sim Toolkit
If everything works you just have to do a clean install of CM7
is an attempt, but if you do not know what else to do ... (I would try) :silly:

quack75 said:
Have you tried to restore the backup of your stock rom with the new sim?
This may solve the problems associated with Sim Toolkit
If everything works you just have to do a clean install of CM7
is an attempt, but if you do not know what else to do ... (I would try) :silly:
Click to expand...
Click to collapse
Hmm that could work but there is problem... I don't have backup of my stock rom...

New solution
Ok. My friend have htc wildfire on stock ROM. I would like to make copy of his ROM. I know i need to s-off his phone, push revolutionary recovery, and just make backup? If I'm thinking right this would give me zip of his ROM that I can copy to my SD-card and install it like other ROMs?
Thanks in advance for repy.

Groofy said:
Ok. My friend have htc wildfire on stock ROM. I would like to make copy of his ROM. I know i need to s-off his phone, push revolutionary recovery, and just make backup? If I'm thinking right this would give me zip of his ROM that I can copy to my SD-card and install it like other ROMs?
Thanks in advance for repy.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=33351487
If you are s-off then download the first rom in this post, drop it on your sd card and rename it to PC49IMG.zip then boot into hboot and let it update. When your phone boots up again it will be stock but still s-off so you won't need to mess about unlocking everything again.
Sent from my GT-I9100 using Tapatalk 2

Used stock ROM. Installed. Tried all the radios in the meantime and still no signal.
God please say that You have more ideas.

imo it's broken gsm module (antenna). try to flash some other roms, maybe it will work.
PS, widze ze kolega z Polski napisz na priv to sprobujemy cos wymyslic
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2

[Q] Can't Connect to Mobile Network after Custom ROM Flash

Hi all, so I'm in quite the predicament. I can't seem to reestablish a mobile connection via Verizon at all since I've overwritten the stock ROM with Cyanogen. I have Inc2, now loaded with CM7, awaiting some help.
First I unlocked the bootloader and flashed CWM Recovery.
Next I flashed Build 4 CM10 http://forum.xda-developers.com/showthread.php?t=1934288 <--check it out here.
I couldn't establish any network connection whatsoever. So i wiped and flashed CM9 with the hopes it would be more stable. http://forum.xda-developers.com/showthread.php?t=1932573 <--again check that one out.
Again, no network connection. Lastly, I reverted to CM7 (because it was the last stable release directly from Cyanogen). http://wiki.cyanogenmod.org/index.php?title=Vivow_Info <--looky here.
I've searched far and wide, trying everything possible. From simply switching on/off airplane mode to manually typing in the Verizon APN. I just can't establish network connection now...and the kicker - I forgot to backup the stock ROM so I'm currently stuck. Please help
This thread may be of some help. Didn't do me much justice however. http://forum.xda-developers.com/showthread.php?t=1691017

Bumping. Somebody please help...Also if anyone has a stock ROM they could share, that'd do fine as well. I'm curious if stock ROM would re-enable the radio (if that's the actual problem).

Sane116 said:
Bumping. Somebody please help...Also if anyone has a stock ROM they could share, that'd do fine as well. I'm curious if stock ROM would re-enable the radio (if that's the actual problem).
Click to expand...
Click to collapse
You don't need to bump a thread after 30 minutes -.-

nitsua98 said:
You don't need to bump a thread after 30 minutes -.-
Click to expand...
Click to collapse
Goes to show how desperate I'm becoming.

Have you tried changing your mobile network? Settings > more> network mode

Been there. You can try different radios from here, but BE CAREFUL. Take the following precautions:
Because you're on Verizon, only download 'x.x.01.xxxx' radios.
After putting the ZIP file on the SD card, verify the MD5 hash to ensure the file didn't get corrupted during download or during transfer to the SD card.
Plug the phone into your charger before installing. You don't want it shutting off during install.
Don't flash the same radio that your phone already has installed.
If all else fails, try the stock 2.3.3 RUU from HTC. If you can find a working download link to that, please share.

Airo18 said:
Have you tried changing your mobile network? Settings > more> network mode
Click to expand...
Click to collapse
I've tried everything in the books. Manually setting my APN according to the Verizon settings. Also did trial and error booting and rebooting each network type to no avail.
A few things I noticed in the CM9 ROM (maybe bugs?):
The preferred network mode typically defaults to GSM/WCDMA upon reboot
The APN I create often disappear upon reboot.
Mobile Networks>Network Operators will either search endlessly or sometimes find both AT&T and T-Mobile as options, both of which won't actually connect as I have a Verizon SIM.
And in response to Slinkwyde:
To verify the MD5 hash, what needs to be done more specifically? (I'm learning as I go ) Did flashing a radio do the fix for you? I'll try this suggestion and post results.

Sane116 said:
I've tried everything in the books. Manually setting my APN according to the Verizon settings. Also did trial and error booting and rebooting each network type to no avail.
A few things I noticed in the CM9 ROM (maybe bugs?):
The preferred network mode typically defaults to GSM/WCDMA upon reboot
The APN I create often disappear upon reboot.
Mobile Networks>Network Operators will either search endlessly or sometimes find both AT&T and T-Mobile as options, both of which won't actually connect as I have a Verizon SIM.
And in response to Slinkwyde:
To verify the MD5 hash, what needs to be done more specifically? (I'm learning as I go ) Did flashing a radio do the fix for you? I'll try this suggestion and post results.
Click to expand...
Click to collapse
Verizon sim? What country are you in, are you using gsm?
Sent from my Incredible 2 using xda app-developers app

jeremytn86 said:
Verizon sim? What country are you in, are you using gsm?
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
Yes, verizon sim card. I'm in the USA. And I believe I am supposed to be using GSM but I don't fully comprehend the differences between each type. However I have tried setting each type in system settings>mobile networks with no data showing at any point.

Sane116 said:
And in response to Slinkwyde:
To verify the MD5 hash, what needs to be done more specifically? (I'm learning as I go ) Did flashing a radio do the fix for you? I'll try this suggestion and post results.
Click to expand...
Click to collapse
Yes, flashing a radio worked for me. The simplest way would be to use an MD5 checker app. Use the app to make sure the file on your SD card matches the MD5 value given in the radio thread I linked to.
One more precaution: Don't ever flash the same radio version that your phone is already using. That caused problems with the original Incredible and might also cause problems with the Incredible 2. To see what radio version you have, go to Settings and look around in About phone, Phone info, or something to that effect. "Baseband" is another word for radio.
Sane116 said:
Yes, verizon sim card. I'm in the USA. And I believe I am supposed to be using GSM but I don't fully comprehend the differences between each type. However I have tried setting each type in system settings>mobile networks with no data showing at any point.
Click to expand...
Click to collapse
Short version: For Verizon, you want CDMA with EvDO.
Longer overview: CDMA vs GSM, and what it means for the Incredible 2
Verizon Wireless and Sprint use CDMA. AT&T and T-Mobile use GSM. CDMA is popular in the United States, but around the world GSM is far more common. All GSM phones use SIM cards, but most CDMA phones don't. The two kinds of CDMA phones that do have SIM cards are world phones (phones with both CDMA and GSM) and LTE phones (faster data speeds).
The Incredible 2 is a world phone (without LTE) and comes with a Vodafone SIM for overseas travel. This Vodafone SIM also has Verizon Wireless branding on it. The Verizon Wireless company is jointly owned by Verizon and Vodafone, a European carrier based in the UK. Verizon world phones have to be unlocked to use AT&T or T-Mobile, because Verizon doesn't want their customers switching to a competitor.
SIM cards make it easy for GSM users (not you) to use their carrier account in another phone. They can just swap the SIM. For CDMA carriers (such as Verizon), swapping service to a different phone requires contacting the carrier.

Sane116 said:
Yes, verizon sim card. I'm in the USA. And I believe I am supposed to be using GSM but I don't fully comprehend the differences between each type. However I have tried setting each type in system settings>mobile networks with no data showing at any point.
Click to expand...
Click to collapse
You don't need the sim card at all then, you're CDMA. If you're not on it already i would recommend flashing the latest ics firmware, it can be found in the ICS leak ROM thread posted by nitsuj17 , it includes the newest radio
Sent from my Incredible 2 using xda app-developers app

Jeremy is referring to this thread: http://forum.xda-developers.com/showthread.php?t=1846304
Note that he's specifically suggesting that you install the ICS firmware. You don't have to install the ROM.

jeremytn86 said:
You don't need the sim card at all then, you're CDMA. If you're not on it already i would recommend flashing the latest ics firmware, it can be found in the ICS leak ROM thread posted by nitsuj17 , it includes the newest radio
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
Slinkwyde said:
Jeremy is referring to this thread: http://forum.xda-developers.com/showthread.php?t=1846304
Note that he's specifically suggesting that you install the ICS firmware. You don't have to install the ROM.
Click to expand...
Click to collapse
Okay so what you both are suggesting are to just install the firmware, assuming I am already running the CM9 ROM? Because the firmware includes the radio. And this is done by renaming the firmware to PG32IMG and flashing it through hboot? Would this be an easier course of action than installing a radio alone? My phone is S-ON and if I'm correct, S-OFF needs to be active to install a radio.

Yes, you can install the firmware to get the radio, and the file name needs to be PG32IMG.zip for hboot. S-OFF is generally required for this sort of thing, yes.

Slinkwyde said:
Yes, you can install the firmware to get the radio, and the file name needs to be PG32IMG.zip for hboot. S-OFF is generally required for this sort of thing, yes.
Click to expand...
Click to collapse
Thanks so much guys, you've been more than helpful. Now to get some work done...I'll post results either tonight or tomorrow once I've finished. Wish me luck!

Put the battery cover back on. It'll instantly drop sig. when not installed.
TA4S

I'm currently trying to downgrade Inc2 so I can S-Off in order to flash either new firmware or radio. I am following this http://forum.xda-developers.com/showthread.php?t=1726134 and cant seem to download the necessary RUU 2.3.3 for Inc2. It seems as if the downloads link is dead. Can anybody link to such a file? I cant seem to find one anywhere.
EDIT: Found a stock (or as close to stock I could find) ROM for INC2 >> http://d-h.st/I2g

Also, I may have a potential reason as to why I'm having this ***** of a problem. I originally unlocked bootloader using the HTCdev tool. At the time it was my understanding that the process did not matter as long as the results were the same. However it seems now that using their tool makes it so you can't flash radios and need to extract and separately flash ROM kernels. So does this mean flashing any of the CM ROM's I tried never included the radio portion?
Just stabbing at ideas. Feel free to verify/call me out.

Sane116 said:
Also, I may have a potential reason as to why I'm having this ***** of a problem. I originally unlocked bootloader using the HTCdev tool. At the time it was my understanding that the process did not matter as long as the results were the same. However it seems now that using their tool makes it so you can't flash radios and need to extract and separately flash ROM kernels. So does this mean flashing any of the CM ROM's I tried never included the radio portion?
Just stabbing at ideas. Feel free to verify/call me out.
Click to expand...
Click to collapse
Roms NEVER include a radio, its always separate. something weird has happened to you, I'm sure flashing new radio would fix it for you but you're dev unlocked which is gay Lol. When you flashed the cyanogen ROMs did you pull kernel and flash like you were supposed to, if not i can't believe you got it to boot but that may be a problem also.
Sent from my Incredible 2 using xda app-developers app

jeremytn86 said:
Roms NEVER include a radio, its always separate. something weird has happened to you, I'm sure flashing new radio would fix it for you but you're dev unlocked which is gay Lol. When you flashed the cyanogen ROMs did you pull kernel and flash like you were supposed to, if not i can't believe you got it to boot but that may be a problem also.
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
If it helps, here is the process that I have used every time I flash anew ROM, working every time (excluding the radio of course.http://www.youtube.com/watch?v=ujFWZbgj6bY
Because I HAD (I actually just reverted back and am currently getting S-OFF to flash a radio) the HTCdev unlock, I manually booted the boot.img after entering recovery and wiping/formatting all the necessary things. Skimming the video might give you a better idea.
However I'm now hoping S-OFF will allow me to reroot, flash CWM, CM9, and of course a radio. Currently in the process of trying to run Revolutionary.