Related
I know this has been asked hundreds of times, and i searched the forums for days for a way to fix it, but with no use.
I have a rooted AT&T Galaxy SIII with JB 4.1.1. I am trying to install the CM 10.1(4.2.2) Nightly version, but i always get the infamous "Status 7 Installation Aborted" error.
Yes i am sure im downloading the correct ROM zip file for my phone and carrier.
I have CWM 6.0.2.1, and i followed the steps correctly. (Clear data -> Clear Cache Partition -> Clear Dalvik Cache -> install ROM)
I have tried so many times, i also re-rooted my phone, reinstalled CWM, and redownloaded different nightly versions of the ROM, as well as other ROMS like JellyBam.
I also tried to delete the assert lines in the update-script file, but that also wouldnt work.
Thank you. :good:
And please dont hate on me, im new to rooting and flashing. :crying:
Improper recovery.
samelaryan said:
I know this has been asked hundreds of times, and i searched the forums for days for a way to fix it, but with no use.
I have a rooted AT&T Galaxy SIII with JB 4.1.1. I am trying to install the CM 10.1(4.2.2) Nightly version, but i always get the infamous "Status 7 Installation Aborted" error.
Yes i am sure im downloading the correct ROM zip file for my phone and carrier.
I have CWM 6.0.2.1, and i followed the steps correctly. (Clear data -> Clear Cache Partition -> Clear Dalvik Cache -> install ROM)
I have tried so many times, i also re-rooted my phone, reinstalled CWM, and redownloaded different nightly versions of the ROM, as well as other ROMS like JellyBam.
I also tried to delete the assert lines in the update-script file, but that also wouldnt work.
Thank you. :good:
And please dont hate on me, im new to rooting and flashing. :crying:
Click to expand...
Click to collapse
BAM1789 said:
Improper recovery.
Click to expand...
Click to collapse
if you can boot into the phone, download ROM manager and update your cwm recovery. latest version is 6.0.2.8.
CM10 and 10.1 are picky about you having the most recent version. cheers
xBeerdroiDx said:
if you can boot into the phone, download ROM manager and update your cwm recovery. latest version is 6.0.2.8.
CM10 and 10.1 are picky about you having the most recent version. cheers
Click to expand...
Click to collapse
I did that and it worked thank you :good:
samelaryan said:
I did that and it worked thank you :good:
Click to expand...
Click to collapse
thats what we're all here for, buddy
Status 7: installation aborted.
xBeerdroiDx said:
thats what we're all here for, buddy
Click to expand...
Click to collapse
Hi guys, I'm having same issue but on N7000 international version. I'm able to go in the recovery mode and download mode but phone won't boot normally. It's stuck on Samsung logo so can you please advise something? How can I update CWM if that's the issue. I was on ICS 4.0.4 XXLRK before trying to install CM10.1 on Note.
Thanks in advance for your help.
perceptorz said:
Hi guys, I'm having same issue but on N7000 international version. I'm able to go in the recovery mode and download mode but phone won't boot normally. It's stuck on Samsung logo so can you please advise something? How can I update CWM if that's the issue. I was on ICS 4.0.4 XXLRK before trying to install CM10.1 on Note.
Thanks in advance for your help.
Click to expand...
Click to collapse
I would be doing my research in an N7000 forum, friend.
Also, your post seems confusing as you seem to be saying you also got a status 7 error but then you appear to have installed abroad and are stuck at the boot logo. If you successfully flashed the correct rom for your device without any errors, pull battery, replace and wipe data in recovery. Reboot
xBeerdroiDx said:
I would be doing my research in an N7000 forum, friend.
Also, your post seems confusing as you seem to be saying you also got a status 7 error but then you appear to have installed abroad and are stuck at the boot logo. If you successfully flashed the correct rom for your device without any errors, pull battery, replace and wipe data in recovery. Reboot
Click to expand...
Click to collapse
Apologies for both confusion and using the S3 that to find some help. I just found the situation quite familiar so I couldn't help myself from asking the question
On the situation, I was able to install CWM and am able to go to recovery or download mode but the error displays when I try to update the zip of any rom.
perceptorz said:
Apologies for both confusion and using the S3 that to find some help. I just found the situation quite familiar so I couldn't help myself from asking the question
On the situation, I was able to install CWM and am able to go to recovery or download mode but the error displays when I try to update the zip of any rom.
Click to expand...
Click to collapse
If the phone itself is functioning fine but you simply cannot flash a new rom or rom update, you need to update your recovery. Go to clockworkmods website and download version 6.0.1.2.
xBeerdroiDx said:
If the phone itself is functioning fine but you simply cannot flash a new rom or rom update, you need to update your recovery. Go to clockworkmods website and download version 6.0.1.2.
Click to expand...
Click to collapse
Right now, phone doesn't get pass Samsung boot logo so will I be able to update new CWM using Odin? (Sorry, if the question appears to be basic or stupid)
perceptorz said:
Right now, phone doesn't get pass Samsung boot logo so will I be able to update new CWM using Odin? (Sorry, if the question appears to be basic or stupid)
Click to expand...
Click to collapse
I would take up this situation in the correct forum. The more we discuss your device issues the more likey you are to download the wrong file or use a procedure not designed for your device software.
If you came from stock, flashed a rom and are stuck at the samsung logo, boot into recovery, wipe data and cache. Reboot to see if that helped. If not, seek advice in the N7000 forum. Cheers
Thanks for the guidance.
Hi all ... I am working with a Samsung Galaxy Tab 3 7.0 (SM-T210R) and was interested in speeding the device up.
I flashed TWRP 2.6.3 and rooted and then tried to flash the SEAL ROM after watching the video.
During the install. I got a bunch of errors ... I don't have a screenshot, but it said the following:
ASSERT FAILED package_extract_file ("boot.img") ...
E: Error Executing updater binary in zip '/external_sd/ROM/SEAL V2 Official.zip' ....
Error Flashing Zip 'external_sd/ROMS/SEAL V2 ...
Luckily, the backup is working fine and I was able to restore.
I finally was able to flash a debloat script that I saw on XDA to speed it up a bit, but I really wanted to try this rom.
Any ideas are appreciated. Thanks very much.
savidon said:
Hi all ... I am working with a Samsung Galaxy Tab 3 7.0 (SM-T210R) and was interested in speeding the device up.
I flashed TWRP 2.6.3 and rooted and then tried to flash the SEAL ROM after watching the video.
During the install. I got a bunch of errors ... I don't have a screenshot, but it said the following:
ASSERT FAILED package_extract_file ("boot.img") ...
E: Error Executing updater binary in zip '/external_sd/ROM/SEAL V2 Official.zip' ....
Error Flashing Zip 'external_sd/ROMS/SEAL V2 ...
Luckily, the backup is working fine and I was able to restore.
I finally was able to flash a debloat script that I saw on XDA to speed it up a bit, but I really wanted to try this rom.
Any ideas are appreciated. Thanks very much.
Click to expand...
Click to collapse
Try removing any spaces in the zip name.
gr8nole said:
Try removing any spaces in the zip name.
Click to expand...
Click to collapse
Thanks for the suggestion .. I just tried that and got the same errors.
Strange.
FWIW .. I also had issues trying to install the RocketTab ROM as well. Different problem, but still never worked. As I said, I was able to flash a debloat script that seems to have helped with the performance somewhat but still not great.
Thanks again.
savidon said:
Hi all ... I am working with a Samsung Galaxy Tab 3 7.0 (SM-T210R) and was interested in speeding the device up.
I flashed TWRP 2.6.3 and rooted and then tried to flash the SEAL ROM after watching the video.
During the install. I got a bunch of errors ... I don't have a screenshot, but it said the following:
ASSERT FAILED package_extract_file ("boot.img") ...
E: Error Executing updater binary in zip '/external_sd/ROM/SEAL V2 Official.zip' ....
Error Flashing Zip 'external_sd/ROMS/SEAL V2 ...
Luckily, the backup is working fine and I was able to restore.
I finally was able to flash a debloat script that I saw on XDA to speed it up a bit, but I really wanted to try this rom.
Any ideas are appreciated. Thanks very much.
Click to expand...
Click to collapse
I followed these directions (minus the rooting, as the ROM is already Rooted) yesterday and installed RocketTab 3.1 without a hitch:
http://forum.xda-developers.com/showthread.php?t=2660588
tsg2513 said:
I followed these directions (minus the rooting, as the ROM is already Rooted) yesterday and installed RocketTab 3.1 without a hitch:
http://forum.xda-developers.com/showthread.php?t=2660588
Click to expand...
Click to collapse
I've tried RocketTab multiple times ... and after flashing I get a message that the device appears to not be rooted, and offers to install SuperSU ... whether I say install or not, after I reboot ... the tablet freezes on the Samsung opening screen. I have no idea what else to try.
Thanks.
savidon said:
I've tried RocketTab multiple times ... and after flashing I get a message that the device appears to not be rooted, and offers to install SuperSU ... whether I say install or not, after I reboot ... the tablet freezes on the Samsung opening screen. I have no idea what else to try.
Thanks.
Click to expand...
Click to collapse
Did you check the MD5 of the zip, it could be a bad download.
Sent from my SCH-I605
gr8nole said:
Did you check the MD5 of the zip, it could be a bad download.
Sent from my SCH-I605
Click to expand...
Click to collapse
I did .. it matched. I think I'll try downloading again just in case though. Not sure what else to try at this point.
Thanks.
So I re-downloaded the SEAL ROM files and this time it installed without any errors, but I still got the not rooted message when I tried to reboot the device in TWRP. Again, whether or not I choose to install SuperSU, it hangs on the Samsung Galaxy Tab screen and I need to boot back into recovery and restore from backup to get working again.
For some reason, the root in the ROMs is not taking or something? Is that what is causing the problem? Does that make any sense?
Any other ideas? Thanks again!
savidon said:
So I re-downloaded the SEAL ROM files and this time it installed without any errors, but I still got the not rooted message when I tried to reboot the device in TWRP. Again, whether or not I choose to install SuperSU, it hangs on the Samsung Galaxy Tab screen and I need to boot back into recovery and restore from backup to get working again.
For some reason, the root in the ROMs is not taking or something? Is that what is causing the problem? Does that make any sense?
Any other ideas? Thanks again!
Click to expand...
Click to collapse
Sound like the system is not flashing correctly. Maybe try a different recovery.
Sent from my SCH-I605
Try the normal CWM coz touch-based are allergic to my device too....no worries you can still still scroll down the menu list of options using your finger tips
Sent from my SM-T211 using XDA Premium 4 mobile app
So here is the latest update in my custom rom saga ...
I downgraded TWRP to 2.6.1 .. and attempted to re-flash both SEAL and RocketTab. Both installs seemed to complete without any errors this time, but after rebooting, my device froze on the Samsung Galaxy Tab logo screen .. before the boot animation. This happened for both the SEAL and RocketTab roms. I also no longer got the not rooted error message, so it looked like it was fine.
Any thoughts on why these custom roms are not booting? I appreciate the help.
I restored back to my de-bloated stock backup, and it works fine. A little faster definitely, but not speedy by any means.
Thanks again.
Try philz touch recovery. I also had problems with cwm and twrp. But philz touch does the charm for me.
Sent from my SM-T210R using xda app-developers app
I installed TWRP on my Note 10.1 2014 through the play store app. Once I installed the recovery image, I tried rebooting into recovery and it would only boot to the OS.
I went into the app and rebooted to recovery from there and it did go into TWRP, however, there is no response on the touchscreen or any other button but power, which causes it to reboot back into TWRP.
I haven't been able to find a way to get back to the OS or do anything else.
Can anybody help me out? I'm very new to this, I had it rooted and tripped the warranty bit a while back but that's all I've done. I just want to upgrade to KK, which I can't do since the warranty bit has been tripped. (I'll go to Lollipop if I can, but I have a few apps I want that need at least KitKat.)
Thanks in advance for any help you can provide!!
2.8.7.0?
Sent from my SCH-R530U using Tapatalk
Orion116 said:
2.8.7.0?
Sent from my SCH-R530U using Tapatalk
Click to expand...
Click to collapse
Yes, it was 2.8.7.0. After doing some more searching, I found out how to flash TWRP with Odin and got 2.8.6.0 working. I now have it fixed running Lollipop.
jbrewer8 said:
Yes, it was 2.8.7.0. After doing some more searching, I found out how to flash TWRP with Odin and got 2.8.6.0 working. I now have it fixed running Lollipop.
Click to expand...
Click to collapse
Thank you sir. Exactly the same problem here: No touchscreen on SM-P600, stuck on recovery boot loop, and had to flash TWRP through ODIN to get out. Now in 2.8.6.0 and everything is working now.
Hi.
Anybody could tell me how solve this problem?. Me too installed TWRP 2.8.7.0 in my Samsun SM-P600 but touchscreen does not work. Shutdown the tablet doesn't work, only return to TWRP.
Ashade mentioned: "had to flash TWRP through ODIN", but, if there is a guide let me know, because I don't wanna break my tablet more.
This of root and flash is new for me.
sanyick said:
Hi.
Anybody could tell me how solve this problem?. Me too installed TWRP 2.8.7.0 in my Samsun SM-P600 but touchscreen does not work. Shutdown the tablet doesn't work, only return to TWRP.
Ashade mentioned: "had to flash TWRP through ODIN", but, if there is a guide let me know, because I don't wanna break my tablet more.
This of root and flash is new for me.
Click to expand...
Click to collapse
Go here and read thread #6 and #7. After you flashed twrp 2.8.7.0, you need to use your spen to navigate and it's very sensitive so be careful not to click on the wrong option. Good luck.
http://forum.xda-developers.com/gal...-easily-root-modifying-kernel-how-to-t3242644
Ashade said:
Thank you sir. Exactly the same problem here: No touchscreen on SM-P600, stuck on recovery boot loop, and had to flash TWRP through ODIN to get out. Now in 2.8.6.0 and everything is working now.
Click to expand...
Click to collapse
There is a version of 2.8.7.0 with fully working touch and other tweaks. This one: https://basketbuild.com/devs/Joshndroid/TWRP/lt03wifi which is compiled to support F2FS, but works just fine.
Thanks all... I never thought to use the Spen. I gonna follow your tips. regards.
buhohitr said:
Go here and read thread #6 and #7. After you flashed twrp 2.8.7.0, you need to use your spen to navigate and it's very sensitive so be careful not to click on the wrong option. Good luck.
http://forum.xda-developers.com/gal...-easily-root-modifying-kernel-how-to-t3242644
Click to expand...
Click to collapse
I stuck on it for almost half an hour keep on reflash different version twrp..hahahaha..
thank for your help. bro happy new year
Hi,
my t mobile N3 came with stock 5.0 L
i rooted it with CF auto root (went OK) and then flashed TWRP ( latest )
recovery , root all work fine except the fact that i cant flash any roms, twrp is working perfectly , it makes nandroid back up, but when i start to flash a rom, the logs start and when it says " initializing aroma installer" , the recovery re boots and im back to TWRP main menu
so far, ive tried Dominion V12 and DOM POP rom and same problems occurs to both. i follow every instruction to the letter but IDK why this issue is coming,,
any help will be welcum !
blueazure said:
Hi,
my t mobile N3 came with stock 5.0 L
i rooted it with CF auto root (went OK) and then flashed TWRP ( latest )
recovery , root all work fine except the fact that i cant flash any roms, twrp is working perfectly , it makes nandroid back up, but when i start to flash a rom, the logs start and when it says " initializing aroma installer" , the recovery re boots and im back to TWRP main menu
so far, ive tried Dominion V12 and DOM POP rom and same problems occurs to both. i follow every instruction to the letter but IDK why this issue is coming,,
any help will be welcum !
Click to expand...
Click to collapse
Ah man... we need to get you on our Team DomPop ROM's, especially Dominion.
But for your issue, I'm willing to bet that you probably installed TWRP 3.0 correct? If so you'll need to install an older version. The AROMA installers do not work on TWRP 3.0 version.
I'm on 2.8.4.0 and everything works perfectly.
thanks, ill try it, i had a hunch some thing is wrong with TWRP
on a second note, im currently on stock 5.0 and 2g reception is terrible. it was fine on 4.4
will flashing domprop fix the signal issue ?
Done ! thanks !
just flashed domprop flawlessly on twrp 28.40
blueazure said:
Done ! thanks !
just flashed domprop flawlessly on twrp 28.40
Click to expand...
Click to collapse
No problem, I'm glad it worked out for you. I definitely don't mind helping out, especially when someone wants to flash one of our ROM's. Haha
blueazure said:
Done ! thanks !
just flashed domprop flawlessly on twrp 28.40
Click to expand...
Click to collapse
Did u get a force Samsung account sign in after flashing?
Sent from my SM-N900T using XDA-Developers mobile app
blueazure said:
Hi,
my t mobile N3 came with stock 5.0 L
i rooted it with CF auto root (went OK) and then flashed TWRP ( latest )
recovery , root all work fine except the fact that i cant flash any roms, twrp is working perfectly , it makes nandroid back up, but when i start to flash a rom, the logs start and when it says " initializing aroma installer" , the recovery re boots and im back to TWRP main menu
so far, ive tried Dominion V12 and DOM POP rom and same problems occurs to both. i follow every instruction to the letter but IDK why this issue is coming,,
any help will be welcum !
Click to expand...
Click to collapse
Did u get that force log in with Samsung account? I did and I can't pass it. Says error in log in info..and I know I'm putting in correct log in information.
Sent from my SM-N900T using XDA-Developers mobile app
Hello there,
This is my first XDA thread! This is an issue I ran into.
I just installed CM 14.1 on my OP3. I downloaded the latest TWRP from the official website before flashing it.
Here is the problem. After setting up my ROM, like installing all the required apps, I'm not able to boot into recovery. I tried flashing TWRP again, I downloaded the oneplus recovery from your website and I flashed that one too.
I erased recovery partition and installed both of them again (erasing each time). What happens is, after booting into the bootloader, I select recovery to go to the recovery and it stays blank, unless I reset it by holding the buttons.
Please let me know what I can do.
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
SillyPython said:
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
Click to expand...
Click to collapse
Thanks for the reply.
Are you sure what happened to is exactly what happened to you? Because I tried the ToolKit and it is not working. I tried both the versions of the TWRP and Stock recovery.
If you know anything else about this issue that would help me. I'd love to hear it.
SillyPython said:
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
Click to expand...
Click to collapse
Also. Does encryption affect this in anyway, because I did it. I don't want to factory reset my phone because this is my primary phone and I don't have another phone. And I don't want to risk it, at least for a few days.
malachiseelam said:
Hello there,
This is my first XDA thread! This is an issue I ran into.
I just installed CM 14.1 on my OP3. I downloaded the latest TWRP from the official website before flashing it.
Here is the problem. After setting up my ROM, like installing all the required apps, I'm not able to boot into recovery. I tried flashing TWRP again, I downloaded the oneplus recovery from your website and I flashed that one too.
I erased recovery partition and installed both of them again (erasing each time). What happens is, after booting into the bootloader, I select recovery to go to the recovery and it stays blank, unless I reset it by holding the buttons.
Please let me know what I can do.
Click to expand...
Click to collapse
Modified TWRP version should do it
Same, when I flashed cm 14.1 I also got blank TWRP.
michielokt said:
Same, when I flashed cm 14.1 I also got blank TWRP.
Click to expand...
Click to collapse
Then, what did you do?
LS.xD said:
Modified TWRP version should do it
Click to expand...
Click to collapse
Thanks LS.xD. You are awesome. I completely messed up my old Moto X and I didn't have a smartphone until now. I hesitated a lot before installing all custom stuff until I gave in. And this problem made me worry a lot.
Thanks a lot.
michielokt said:
Same, when I flashed cm 14.1 I also got blank TWRP.
Click to expand...
Click to collapse
Michielokt, you should try flash the recovery LS.xD gave the link to, it booted.
malachiseelam said:
Thanks LS.xD. You are awesome. I completely messed up my old Moto X and I didn't have a smartphone until now. I hesitated a lot before installing all custom stuff until I gave in. And this problem made me worry a lot.
Thanks a lot.
Michielokt, you should try flash the recovery LS.xD gave the link to, it booted.
Click to expand...
Click to collapse
Thanks it worked!
Please try the modified TWRP, 3.0.2-22