Develop Bugs

[ROM][JB]Stock Sprint LJ7 Official Release Port 10/29/2012

This is a completely stock Sprint Official JB LJ7 port. This is pretty much just a copy of my thread here: http://forum.xda-developers.com/showthread.php?p=33285365#post33285365
The base is based off Freeza's release http://forum.xda-developers.com/showthread.php?t=1910947
Features
Deodexed
rooted
busybox
Stock Kernel by Ktoonsez so be sure to thank him! Without him this wouldn't be possible(The rotation was flipped with the stock sprint kernel) http://forum.xda-developers.com/showthread.php?t=1756776
What doesn't work(so far):
tethering
exFat sd support (for now)
Change Log:
10/29/2012:
fixed wifi not connecting
added modified mms which should fix sending/receiving issues some were having
10/28/2012:
Added ril libs from tmo leak to fix international calling issue and intermittent no incoming call issue
kept everything stock (all apps etc.) just removed the the sprint specific apps
Download Link: http://d-h.st/7ji
Flash this zip right after you flash the rom. Since this is basically the version I posted in the ATT forum this zip will change the build.prop to show T999 instead of i747 http://d-h.st/loh Everything will work without flashing the zip but your phone will be identified as a i747 not a t999]
Disclaimer: I am not responsible if you flash this and your device gets bricked or anything happens to your device from flashing this.
Devs: Feel free to use this as your base

reserved for me...

I'll take this one too

Nice job thanks
Sent from my SGH-T999 using Xparent SkyBlue Tapatalk 2

Finally
Sent from my SGH-T999 using xda premium

Thx for this

Hi I'm loving the ROM but I encounter this thing in every jb ROM in the browser if you swipe on the sides it zooms in an out for the love of god does anyone know how to disable this
Sent from my SGH-T999 using xda app-developers app

Some users reported in my ATT thread they were having trouble with sending/receiving MMS messages
For anyone with issues with MMS. Try this apk. It's the modified one from my BJ rom, but with the theming removed
http://d-h.st/Fam
Before anyone asks, It's just the apk, it's not a flashable zip.

Anyone having issues with WiFi not working?

md1008 said:
Anyone having issues with WiFi not working?
Click to expand...
Click to collapse
Have the same problem just won't turn on... back on cm10
Sent from my SGH-T999 using xda app-developers app

md1008 said:
Anyone having issues with WiFi not working?
Click to expand...
Click to collapse
durvall said:
Have the same problem just won't turn on... back on cm10
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I'll have a fix for that. It was my absentmindedness that forgot to update the libs when I updated the rom today. there is a short term way to fix it(if you prefer the stock kernel) until I can upload a updated one with the correct libs. You can flash ktoonsez's custom kernel and it will fix the wifi as it has the correct libs. I'll be able to upload a fix later (as long as I still have power if the storm is as bad as they say it's going to be)

I also cannot connect to my computer through MTP, windows reads hardware ID missing.

es7241 said:
I also cannot connect to my computer through MTP, windows reads hardware ID missing.
Click to expand...
Click to collapse
Reinstall drivers and or unmount external SD had that problem also
Sent from my SGH-T999 using xda app-developers app

barmanham said:
Hi I'm loving the ROM but I encounter this thing in every jb ROM in the browser if you swipe on the sides it zooms in an out for the love of god does anyone know how to disable this
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Ive noticed the same thing.. I kinda got used to it lol but I do wish for it to be disabled..just scroll in the middle and it works fine.. or another browser I guess
Sent from my SGH-T999 using xda app-developers app

pezlomd said:
Ive noticed the same thing.. I kinda got used to it lol but I do wish for it to be disabled..just scroll in the middle and it works fine.. or another browser I guess
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I actually kinda like it, Because you can hold it one handed if you need to zoom in. It's useful on the nyc subway when you're holding a handrail and reading through things when I can only use one hand. but yeah, there should be an option to turn it off

Loving this, great with ktoonz new kernel.. And tapatalk works! Thanks for your efforts man!
Sent from my SGH-T999 using Tapatalk 2

Donating a 5 spot if someone can disable it can't believe no one has done it yet
Sent from my SGH-T999 using xda app-developers app

Awesome rom man. Hey are you going fix the 3g icon to a 4g icon. Just wondering.
Sent from my SGH-T999 using xda premium

barmanham said:
Donating a 5 spot if someone can disable it can't believe no one has done it yet
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Here. Where's my $5?
https://play.google.com/store/apps/details?id=com.android.chrome
Sent from my SGH-I747 using xda app-developers app

joe.kerwin said:
Here. Where's my $5?
https://play.google.com/store/apps/details?id=com.android.chrome
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Lol that is too funny. In all seriousness that is a function of the stock browser don't like the function download another one. I agree it is annoying, great idea idea but in practice I just end up zooming in and out unintentionally
Sent from my SGH-I747 using xda premium

Ktoonez Kernel High Pitched Noise

I am getting a high pitched noise whenever audio is played. Many were suggesting to use Poweramp and a few other fixes but nothing seems to work. I haven't even't overclocked or undervolted. I am back to stock kernel for now because of this issue. There doesn't seem to be any other kernels for touchwiz JB as of now so I am really looking forward to anyone that has any suggestions to fix this issue.

It's in his thread. I believe you must increase min CPU value.
Sent from my SGH-T999 using Tapatalk 2

devindra1242 said:
I am getting a high pitched noise whenever audio is played. Many were suggesting to use Poweramp and a few other fixes but nothing seems to work. I haven't even't overclocked or undervolted. I am back to stock kernel for now because of this issue. There doesn't seem to be any other kernels for touchwiz JB as of now so I am really looking forward to anyone that has any suggestions to fix this issue.
Click to expand...
Click to collapse
I'm going to install the latest Ktoonez kernel and see if I'll have the same experience.

I dunno if it's related but I've noticed a similar noise when audio cord + charger is in, if no music is playing. Haven't found a fix yet
Sent from my SGH-T999 using xda premium

I'm not experiencing any problems with audio but I am using Poweramp.
I used the latest De-bloater by mrRobinson http://forum.xda-developers.com/showthread.php?t=1732039 and debloated everything (minus Flipboard, Yahoo apk and Dropbox).
Afterwards, I wiped cache and dalvik follow by fix permission. After that is when I installed Ktoonz then wiped and fixed again. Then I accessed system/bin/qosmgr via Root Explorer and renamed it to qosmgr.bak. Rebooted wiped/fix and that's about it.
I'm using TWRP 2.3.1.0; root66 STOCK JB.

elesbb said:
It's in his thread. I believe you must increase min CPU value.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Unfortunately that did not seem to fix the issue.
Sent from my SGH-T999 using Tapatalk 2

devindra1242 said:
Unfortunately that did not seem to fix the issue.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
What did you increase it to? If you can search his thread, I remember reading about it in there and think he posted a fix.
Sent from my SGH-T999 using Tapatalk 2

elesbb said:
What did you increase it to? If you can search his thread, I remember reading about it in there and think he posted a fix.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I increased it to 486mhz but that did not help. I looked through the thread and various fixes were recommended but none of them worked.
Sent from my SGH-T999 using Tapatalk 2

devindra1242 said:
I increased it to 486mhz but that did not help. I looked through the thread and various fixes were recommended but none of them worked.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Have you tried the steps I've taken? I'm not experiencing any audio issues.
Sent from my SGH-T999 using xda app-developers app

Noobiologist said:
Have you tried the steps I've taken? I'm not experiencing any audio issues.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
i do not have Gosmgr in that folder but I do have gsiffdaemon which I did rename.as for the other steps, I have followed all.
Sent from my SGH-T999 using Tapatalk 2

Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

devindra1242 said:
i do not have Gosmgr in that folder but I do have gsiffdaemon which I did rename.as for the other steps, I have followed all.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
You can hold back Ktoonez for awhile since his latest kernel supports the JB leaks and not the official yet.
Sent from my SGH-T999 using xda app-developers app

(Fix) MHL - HDMI TV out for jb roms

Use a build.prob editor and add the following....
1. com.qc.hdmi_out
2. ro.hdmi.enable
3. Reboot
4. Hit the thanks button if I helped
Sent from my SAMSUNG-SGH-T989 using xda premium

bmakk2055 said:
Use a build.prob editor and add the following....
1. com.qc.hdmi_out
2. ro.hdmi.enable
3. Reboot
4. Hit the thanks button if I helped
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
trying it out now! :good:
It works but does not auto rotate. Still though it works! appreciate it!

jctusa7 said:
trying it out now! :good:
Click to expand...
Click to collapse
Is it working for you?
Sent from my SAMSUNG-SGH-T989 using xda premium

No dice for me. Running CM 10.0.0 final.

fideli. said:
No dice for me. Running CM 10.0.0 final.
Click to expand...
Click to collapse
Plug in to TV then reboot and when phone starts it will pop up on TV
Sent from my SAMSUNG-SGH-T989 using xda premium

THANKS!!!
I tried it, and even pluged it in before a reboot but nothing shows up on screen. I see a little flickering, but nothing else.
Also, are you placing "com.qc.hdmi_out" under "Property Name" or "property Key"?
you may want to add "true" o your directions, they are not specific.
Thank you for your efforts none the less! This is a great step in the right direction. :good:

Works well thanks
Sent from my Galaxy Nexus using Tapatalk 2

Works thanks but does not rotate

supersain08 said:
Works thanks but does not rotate
Click to expand...
Click to collapse
That's how it was on cm9. Try this https://play.google.com/store/apps/details?id=nl.fameit.rotate
Sent from my SGH-T989 using xda premium

bmakk2055 said:
Plug in to TV then reboot and when phone starts it will pop up on TV
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Works. A bit inconvenient but works nonetheless. Thanks a lot.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

Worked for me
Sent from my SGH-T989 using xda premium

Will this work with official cm 10?
Sent from my HTC Ruby using xda app-developers app

aznvi3tric3guy said:
Will this work with official cm 10?
Sent from my HTC Ruby using xda app-developers app
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-T989 using xda premium

tried this and it worked. only issue that remains for me is when the MHL cable loses power or is unplugged, the only way to re-initiate the hdmi-out sync is with a reboot of the device. anyone know of a way to manually trigger a resync?

Can anyone post a flashable fix for this, I am at my uncles house and was planning on watching a movie with my cousins and then I realized my jb ROM doesn't have mhl support :/
Sent from my SGH-T989 using Tapatalk 2

Nismo13 said:
Can anyone post a flashable fix for this, I am at my uncles house and was planning on watching a movie with my cousins and then I realized my jb ROM doesn't have mhl support :/
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
That would be hard because everyone's buildprop is different depending on the rom....
Sent from my SGH-T989 using xda premium

Nvm I figured it out , thanks!
Sent from my SGH-T989 using Tapatalk 2

Anyone have any idea why this isn't directly incorporated into CM10?

bmakk2055 said:
Use a build.prob editor and add the following....
1. com.qc.hdmi_out
2. ro.hdmi.enable
3. Reboot
4. Hit the thanks button if I helped
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
For me, setting "ro.hdmi.enable=true" does the job. I tried your com.qc.hdmi_out line also, but found that I had difficulty getting consistent results, but devices may differ. ROMs earlier than 10.0.0 Stable often crashed after using HDMI, after pulling out the cable, even though the video worked well up till that point. But recent ROMs seems to be stable for me.
It is a frustration for me that those who (probably) know about the deeper aspects of this issue (why it was never turned on in the default configuration) never comment on it, so those who want it to work spend lots of time fiddling with it. On the teamhacksung site, a statement was made that it will never work because it involves proprietary code, but that was some time ago, so who knows? The fact that it works well seems to suggest that all the needed code is present and functional, so the mystery is why it is never addressed by the developers explicitly, or turned on by default, or have a setting to turn it on as Galaxy S had.

jpnelson40 said:
For me, setting "ro.hdmi.enable=true" does the job. I tried your com.qc.hdmi_out line also, but found that I had difficulty getting consistent results, but devices may differ.
Click to expand...
Click to collapse
can you explain what you mean by the not getting consistent results? i'm going to try this approach and see what i get today.

CM10.1 Stable Is Out

Has anyone tried it. What's it like?

coltonbauman said:
Has anyone tried it. What's it like?
Click to expand...
Click to collapse
I'm on it, no problems at all. I use Uber Kernel w/ it too.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

U know Tha main question that's going to be asked does Google hang outs work
sent from my carbonized GSII

Haven't touched CM10.1 nightly ROMs for a while. But the LED Notification stopped working, stayed on an older version of CM10.1 nightly.
Gonna try that when I get home. Also PA made it to this device. Also the Jedi mind trick Roms. So many options. Wow head's spinning.
Leaning towards CM10.1 though.

No signal, can't play video
I was using CM10.0. Updated CM10.1 with corresponding gapp.
-Can't register on cellular network anymore. Can't set AWS frequency in the factory testing mode.
-All of my Video apps start legging, play videos for a little while and quit after about a minute, say video format not supported. Even though the video is mp4 format and it was playing it before quitting.
How should fix it? Flash kernel? Which kernel should I use?

zhchaoxing said:
I was using CM10.0. Updated CM10.1 with corresponding gapp.
-Can't register on cellular network anymore. Can't set AWS frequency in the factory testing mode.
-All of my Video apps start legging, play videos for a little while and quit after about a minute, say video format not supported. Even though the video is mp4 format and it was playing it before quitting.
How should fix it? Flash kernel? Which kernel should I use?
Click to expand...
Click to collapse
Uber :thumbup::beer:
sent from my carbonized GSII

Had some problem with radio but I just had to update to the latest version and everything else looks fine

I tried to resist flashing this ROM but had to give in to temptation. Said to myself no more flashing when I got into boot issues with JMTJB6. Odin flashed stock and left it unrooted! Was happy...but then temptation. Happy I did it, rock solid, butter smooth, doesn't seem to have any lag.

vmartinez39 said:
Haven't touched CM10.1 nightly ROMs for a while. But the LED Notification stopped working, stayed on an older version of CM10.1 nightly.
Gonna try that when I get home. Also PA made it to this device. Also the Jedi mind trick Roms. So many options. Wow head's spinning.
Leaning towards CM10.1 though.
Click to expand...
Click to collapse
Works for me. Use Uber Kernel too.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

hatememarkz said:
U know Tha main question that's going to be asked does Google hang outs work
sent from my carbonized GSII
Click to expand...
Click to collapse
Works!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

nivekx9 said:
Works for me. Use Uber Kernel too.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Thanks that did the trick. I was going mad at why the LED notifications stopped working.
Also still on the non-touch recovery, 5.0.26 the one that needs the Darkmod scripts to wipe cache and do full installs.
Also had to turn sensor on/off before it actually worked. Read that from another post from someone that helped me.
Thanks again dude.

vmartinez39 said:
Thanks that did the trick. I was going mad at why the LED notifications stopped working.
Also still on the non-touch recovery, 5.0.26 the one that needs the Darkmod scripts to wipe cache and do full installs.
Also had to turn sensor on/off before it actually worked. Read that from another post from someone that helped me.
Thanks again dude.
Click to expand...
Click to collapse
Sure, no problem , and consider upgrading to 6.x.x recoveries, no scripts needed!

nivekx9 said:
Works!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
My contact still cannot hear me. Any fix for this... Skype not an option as my family doesn't use it.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 4 Beta

cstrips said:
I tried to resist flashing this ROM but had to give in to temptation. Said to myself no more flashing when I got into boot issues with JMTJB6. Odin flashed stock and left it unrooted! Was happy...but then temptation. Happy I did it, rock solid, butter smooth, doesn't seem to have any lag.
Click to expand...
Click to collapse
I just had two random reboots, it might be related to bluetooth.
Scenario 1: Answered a phone call via steering wheel controls in the car. Phone reboots
Scenario 2: While connected left the car car. Phone reboots.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Flash video was not smooth for me. Even with latest Adobe update. But no MHL to TV support was the deal killer. Other than that it was fine.

rudytheinvisible said:
Flash video was not smooth for me. Even with latest Adobe update. But no MHL to TV support was the deal killer. Other than that it was fine.
Click to expand...
Click to collapse
sorry man.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

cstrips said:
I just had two random reboots, it might be related to bluetooth.
Scenario 1: Answered a phone call via steering wheel controls in the car. Phone reboots
Scenario 2: While connected left the car car. Phone reboots.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Are you using a custom kernel? And did you wait the 10 minutes after the flash?
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

No custom kernel. Flashed it days ago...reboot occurred today...Yes I did wait the 10 minutes after initial flash.
Is this a known problem? Would a custom kernel like uber kernel be more stable? I really like this ROM so far as is.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

cstrips said:
No custom kernel. Flashed it days ago...reboot occurred today...Yes I did wait the 10 minutes after initial flash.
Is this a known problem? Would a custom kernel like uber kernel be more stable? I really like this ROM so far as is.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I'm using Uber and I haven't had a RR yet.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Note II volume illusion rom

The volume of this room is pretty low. I'm sure it's not the phone as in other roms the volume is much louder. I can barely hear YouTube in a public setting. Lol. Anyone know how to fix this? Thanks!
Sent from my GT-N7105 using xda app-developers app

Maybe give the Viper Modz a try here: http://forum.xda-developers.com/showthread.php?t=2191223
or ask in the thread of the Rom...

Tried in the thread but then there all this is a developer thread! Lol. And will do. Thanks
Sent from my GT-N7105 using xda app-developers app

I believe you can flash the NEAK kernel, then install the uNEAK app from the Market and adjust the volume. Did this last night on PAC-Man rom and volume is nice and loud now
Got it from here:
http://forum.xda-developers.com/showthread.php?t=2000328
Sent from my SGH-I317 using Tapatalk 2

I also use the Neak Kernel with Beanstalk and use the uNeak app from the Playstore. You can adjust the mic, headphones and speaker volumes. If it's compatible with your Rom, might want to give it a try.

slaydog said:
I believe you can flash the NEAK kernel, then install the uNEAK app from the Market and adjust the volume. Did this last night on PAC-Man rom and volume is nice and loud now
Got it from here:
http://forum.xda-developers.com/showthread.php?t=2000328
Sent from my SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Neva Eva Forget 1984 said:
I also use the Neak Kernel with Beanstalk and use the uNeak app from the Playstore. You can adjust the mic, headphones and speaker volumes. If it's compatible with your Rom, might want to give it a try.
Click to expand...
Click to collapse
Kinda wanted to stay on stock kernel but if those viper apps mentioned previously before don't work I'ma have to switch. Thanks guys!
Sent from my GT-N7105 using xda app-developers app

Sebastianq28 said:
Kinda wanted to stay on stock kernel but if those viper apps mentioned previously before don't work I'ma have to switch. Thanks guys!
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Viper works flawlessly on most if not all Rom's!! There's a lot of info on the page. So if you can figure out how to get everything working. That'll be a great accomplishment grasshopper!
Lol
Sent from SKYNOTE using Taptalk 2

Bajanman said:
Viper works flawlessly on most if not all Rom's!! There's a lot of info on the page. So if you can figure out how to get everything working. That'll be a great accomplishment grasshopper!
Lol
Sent from SKYNOTE using Taptalk 2
Click to expand...
Click to collapse
This...^^^^^^^^^.....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app

Bajanman said:
Viper works flawlessly on most if not all Rom's!! There's a lot of info on the page. So if you can figure out how to get everything working. That'll be a great accomplishment grasshopper!
Lol
Sent from SKYNOTE using Taptalk 2
Click to expand...
Click to collapse
gregsarg said:
This...^^^^^^^^^.....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Click to expand...
Click to collapse
Lol I'm reading through the thread and holy crap. It's somewhat Confusing. Lol and I'm not sure which of the Apps to choose... Or how to find out which cpu type to choose.. So confused! Lol
Sent from my GT-N7105 using xda app-developers app

Sebastianq28 said:
Lol I'm reading through the thread and holy crap. It's somewhat Confusing. Lol and I'm not sure which of the Apps to choose... Or how to find out which cpu type to choose.. So confused! Lol
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Here ya go. This is what I did http://forum.xda-developers.com/showpost.php?p=43953284&postcount=2053
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4

So you didn't mess with any setting at all? Just installed the app then added all those files and chose one you likes?
Just to make sure
which of the 2 apps did you download?
What cpu setting did you choose?
Which of the ir files did you like the best? Haha
And thanks a ton man!
Sent from my GT-N7105 using xda app-developers app

Bajanman said:
Here ya go. This is what I did http://forum.xda-developers.com/showpost.php?p=43953284&postcount=2053
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Click to expand...
Click to collapse
gregsarg said:
This...^^^^^^^^^.....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Click to expand...
Click to collapse
Neva Eva Forget 1984 said:
Maybe give the Viper Modz a try here: http://forum.xda-developers.com/showthread.php?t=2191223
or ask in the thread of the Rom...
Click to expand...
Click to collapse
So I found out the ViPER4Android might be the solution to my volume issues. But every time i go to settings > Device > Sound > MUSIC EFFECTS I get an error that says "Unfortunately, Settings has stopped" Anyone getting this? is there a fix?
Sent from my GT-N7105 using xda app-developers app

Sebastianq28 said:
So you didn't mess with any setting at all? Just installed the app then added all those files and chose one you likes?
Just to make sure
which of the 2 apps did you download?
What cpu setting did you choose?
Which of the ir files did you like the best? Haha
And thanks a ton man!
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Ok I'll post what I downloaded..
Sebastianq28 said:
So I found out the ViPER4Android might be the solution to my volume issues. But every time i go to settings > Device > Sound > MUSIC EFFECTS I get an error that says "Unfortunately, Settings has stopped" Anyone getting this? is there a fix?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Ok you may have just installed the wrong one. Delete the one you have installed first. Then reboot and reinstall the new one!
Here's the one I used:
http://db.tt/XTj0YXNH
And you only need one installed!
As far as the other sound file's, I highlighted which one I downloaded from the viper page.
You just have to use a file explorer to move the files to the correct folder!
Once your done, start a song then open viper audio mod. And change your setting! From there...
FYI:
Keep in mind that if you have a Bluetooth earpiece connected. And then if you connect into the headphone jack. It'll default to the Bluetooth sound for you headphone jack. Until you disconnect the Bluetooth. Then it'll default to the headset setting in VIPER..
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4

Bajanman said:
Ok I'll post what I downloaded..
Ok you may have just installed the wrong one. Delete the one you have installed first. Then reboot and reinstall the new one!
Here's the one I used:
http://db.tt/XTj0YXNH
And you only need one installed!
As far as the other sound file's, I highlighted which one I downloaded from the viper page.
You just have to use a file explorer to move the files to the correct folder!
Once your done, start a song then open viper audio mod. And change your setting! From there...
FYI:
Keep in mind that if you have a Bluetooth earpiece connected. And then if you connect into the headphone jack. It'll default to the Bluetooth sound for you headphone jack. Until you disconnect the Bluetooth. Then it'll default to the headset setting in VIPER..
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Click to expand...
Click to collapse
Ok i Downloaded the file but still have a couple questions.
1. Do I Just use the apk in the file you gave me? or do i need anything else from that folder to install?
2. Once installed what CPU type do I choose for the AT&T Galaxy Note II?

Sebastianq28 said:
Ok i Downloaded the file but still have a couple questions.
1. Do I Just use the apk in the file you gave me? or do i need anything else from that folder to install?
2. Once installed what CPU type do I choose for the AT&T Galaxy Note II?
Click to expand...
Click to collapse
Ok I taught I gave you just the apk.
Here try this one it's the apk only:
http://db.tt/f0spvlYv
But you can use the first one I gave you also. I think I use the file on the right of that zip.
The apk I used was like 1.28mb..
Cpu setting..
After install, open, then install driver. It's the last one on the list A9/15..
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta

Bajanman said:
Ok I taught I gave you just the apk.
Here try this one it's the apk only:
http://db.tt/f0spvlYv
But you can use the first one I gave you also. I think I use the file on the right of that zip.
The apk I used was like 1.28mb..
Cpu setting..
After install, open, then install driver. It's the last one on the list A9/15..
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Click to expand...
Click to collapse
lol i got the app working and it only BARELY raises the volume and for some reason the tweaks only work on speaker? not an headphone?

Sebastianq28 said:
lol i got the app working and it only BARELY raises the volume and for some reason the tweaks only work on speaker? not an headphone?
Click to expand...
Click to collapse
Then something is wrong. Did you perform a reboot after you installed the driver?
Because all mine work. Headset, speaker, Bluetooth, they all change the sound. If you have some head phones use those to set it up.
What steps do you do. Do you know what to turn on and what not to? All the info is on the viper page!!
Check post#2 the sound setting are there...
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4

Yes I did the reboot. And the thing is when I tried to set it up with my headphones (audio technica brand) no setting changed any sound. I could turn anything on or off and no change would reflect.
Sent from my GT-N7105 using xda app-developers app

Sebastianq28 said:
Yes I did the reboot. And the thing is when I tried to set it up with my headphones (audio technica brand) no setting changed any sound. I could turn anything on or off and no change would reflect.
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
I'll send you some instructions on how to get it done
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4

OK thanks. I'll wait for em
Sent from my GT-N7105 using xda app-developers app