I am getting a high pitched noise whenever audio is played. Many were suggesting to use Poweramp and a few other fixes but nothing seems to work. I haven't even't overclocked or undervolted. I am back to stock kernel for now because of this issue. There doesn't seem to be any other kernels for touchwiz JB as of now so I am really looking forward to anyone that has any suggestions to fix this issue.
It's in his thread. I believe you must increase min CPU value.
Sent from my SGH-T999 using Tapatalk 2
devindra1242 said:
I am getting a high pitched noise whenever audio is played. Many were suggesting to use Poweramp and a few other fixes but nothing seems to work. I haven't even't overclocked or undervolted. I am back to stock kernel for now because of this issue. There doesn't seem to be any other kernels for touchwiz JB as of now so I am really looking forward to anyone that has any suggestions to fix this issue.
Click to expand...
Click to collapse
I'm going to install the latest Ktoonez kernel and see if I'll have the same experience.
I dunno if it's related but I've noticed a similar noise when audio cord + charger is in, if no music is playing. Haven't found a fix yet
Sent from my SGH-T999 using xda premium
I'm not experiencing any problems with audio but I am using Poweramp.
I used the latest De-bloater by mrRobinson http://forum.xda-developers.com/showthread.php?t=1732039 and debloated everything (minus Flipboard, Yahoo apk and Dropbox).
Afterwards, I wiped cache and dalvik follow by fix permission. After that is when I installed Ktoonz then wiped and fixed again. Then I accessed system/bin/qosmgr via Root Explorer and renamed it to qosmgr.bak. Rebooted wiped/fix and that's about it.
I'm using TWRP 2.3.1.0; root66 STOCK JB.
elesbb said:
It's in his thread. I believe you must increase min CPU value.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Unfortunately that did not seem to fix the issue.
Sent from my SGH-T999 using Tapatalk 2
devindra1242 said:
Unfortunately that did not seem to fix the issue.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
What did you increase it to? If you can search his thread, I remember reading about it in there and think he posted a fix.
Sent from my SGH-T999 using Tapatalk 2
elesbb said:
What did you increase it to? If you can search his thread, I remember reading about it in there and think he posted a fix.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I increased it to 486mhz but that did not help. I looked through the thread and various fixes were recommended but none of them worked.
Sent from my SGH-T999 using Tapatalk 2
devindra1242 said:
I increased it to 486mhz but that did not help. I looked through the thread and various fixes were recommended but none of them worked.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Have you tried the steps I've taken? I'm not experiencing any audio issues.
Sent from my SGH-T999 using xda app-developers app
Noobiologist said:
Have you tried the steps I've taken? I'm not experiencing any audio issues.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
i do not have Gosmgr in that folder but I do have gsiffdaemon which I did rename.as for the other steps, I have followed all.
Sent from my SGH-T999 using Tapatalk 2
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
devindra1242 said:
i do not have Gosmgr in that folder but I do have gsiffdaemon which I did rename.as for the other steps, I have followed all.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
You can hold back Ktoonez for awhile since his latest kernel supports the JB leaks and not the official yet.
Sent from my SGH-T999 using xda app-developers app
Related
This is a completely stock Sprint Official JB LJ7 port. This is pretty much just a copy of my thread here: http://forum.xda-developers.com/showthread.php?p=33285365#post33285365
The base is based off Freeza's release http://forum.xda-developers.com/showthread.php?t=1910947
Features
Deodexed
rooted
busybox
Stock Kernel by Ktoonsez so be sure to thank him! Without him this wouldn't be possible(The rotation was flipped with the stock sprint kernel) http://forum.xda-developers.com/showthread.php?t=1756776
What doesn't work(so far):
tethering
exFat sd support (for now)
Change Log:
10/29/2012:
fixed wifi not connecting
added modified mms which should fix sending/receiving issues some were having
10/28/2012:
Added ril libs from tmo leak to fix international calling issue and intermittent no incoming call issue
kept everything stock (all apps etc.) just removed the the sprint specific apps
Download Link: http://d-h.st/7ji
Flash this zip right after you flash the rom. Since this is basically the version I posted in the ATT forum this zip will change the build.prop to show T999 instead of i747 http://d-h.st/loh Everything will work without flashing the zip but your phone will be identified as a i747 not a t999]
Disclaimer: I am not responsible if you flash this and your device gets bricked or anything happens to your device from flashing this.
Devs: Feel free to use this as your base
reserved for me...
I'll take this one too
Nice job thanks
Sent from my SGH-T999 using Xparent SkyBlue Tapatalk 2
Finally
Sent from my SGH-T999 using xda premium
Thx for this
Hi I'm loving the ROM but I encounter this thing in every jb ROM in the browser if you swipe on the sides it zooms in an out for the love of god does anyone know how to disable this
Sent from my SGH-T999 using xda app-developers app
Some users reported in my ATT thread they were having trouble with sending/receiving MMS messages
For anyone with issues with MMS. Try this apk. It's the modified one from my BJ rom, but with the theming removed
http://d-h.st/Fam
Before anyone asks, It's just the apk, it's not a flashable zip.
Anyone having issues with WiFi not working?
md1008 said:
Anyone having issues with WiFi not working?
Click to expand...
Click to collapse
Have the same problem just won't turn on... back on cm10
Sent from my SGH-T999 using xda app-developers app
md1008 said:
Anyone having issues with WiFi not working?
Click to expand...
Click to collapse
durvall said:
Have the same problem just won't turn on... back on cm10
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I'll have a fix for that. It was my absentmindedness that forgot to update the libs when I updated the rom today. there is a short term way to fix it(if you prefer the stock kernel) until I can upload a updated one with the correct libs. You can flash ktoonsez's custom kernel and it will fix the wifi as it has the correct libs. I'll be able to upload a fix later (as long as I still have power if the storm is as bad as they say it's going to be)
I also cannot connect to my computer through MTP, windows reads hardware ID missing.
es7241 said:
I also cannot connect to my computer through MTP, windows reads hardware ID missing.
Click to expand...
Click to collapse
Reinstall drivers and or unmount external SD had that problem also
Sent from my SGH-T999 using xda app-developers app
barmanham said:
Hi I'm loving the ROM but I encounter this thing in every jb ROM in the browser if you swipe on the sides it zooms in an out for the love of god does anyone know how to disable this
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Ive noticed the same thing.. I kinda got used to it lol but I do wish for it to be disabled..just scroll in the middle and it works fine.. or another browser I guess
Sent from my SGH-T999 using xda app-developers app
pezlomd said:
Ive noticed the same thing.. I kinda got used to it lol but I do wish for it to be disabled..just scroll in the middle and it works fine.. or another browser I guess
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I actually kinda like it, Because you can hold it one handed if you need to zoom in. It's useful on the nyc subway when you're holding a handrail and reading through things when I can only use one hand. but yeah, there should be an option to turn it off
Loving this, great with ktoonz new kernel.. And tapatalk works! Thanks for your efforts man!
Sent from my SGH-T999 using Tapatalk 2
Donating a 5 spot if someone can disable it can't believe no one has done it yet
Sent from my SGH-T999 using xda app-developers app
Awesome rom man. Hey are you going fix the 3g icon to a 4g icon. Just wondering.
Sent from my SGH-T999 using xda premium
barmanham said:
Donating a 5 spot if someone can disable it can't believe no one has done it yet
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Here. Where's my $5?
https://play.google.com/store/apps/details?id=com.android.chrome
Sent from my SGH-I747 using xda app-developers app
joe.kerwin said:
Here. Where's my $5?
https://play.google.com/store/apps/details?id=com.android.chrome
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Lol that is too funny. In all seriousness that is a function of the stock browser don't like the function download another one. I agree it is annoying, great idea idea but in practice I just end up zooming in and out unintentionally
Sent from my SGH-I747 using xda premium
Use a build.prob editor and add the following....
1. com.qc.hdmi_out
2. ro.hdmi.enable
3. Reboot
4. Hit the thanks button if I helped
Sent from my SAMSUNG-SGH-T989 using xda premium
bmakk2055 said:
Use a build.prob editor and add the following....
1. com.qc.hdmi_out
2. ro.hdmi.enable
3. Reboot
4. Hit the thanks button if I helped
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
trying it out now! :good:
It works but does not auto rotate. Still though it works! appreciate it!
jctusa7 said:
trying it out now! :good:
Click to expand...
Click to collapse
Is it working for you?
Sent from my SAMSUNG-SGH-T989 using xda premium
No dice for me. Running CM 10.0.0 final.
fideli. said:
No dice for me. Running CM 10.0.0 final.
Click to expand...
Click to collapse
Plug in to TV then reboot and when phone starts it will pop up on TV
Sent from my SAMSUNG-SGH-T989 using xda premium
THANKS!!!
I tried it, and even pluged it in before a reboot but nothing shows up on screen. I see a little flickering, but nothing else.
Also, are you placing "com.qc.hdmi_out" under "Property Name" or "property Key"?
you may want to add "true" o your directions, they are not specific.
Thank you for your efforts none the less! This is a great step in the right direction. :good:
Works well thanks
Sent from my Galaxy Nexus using Tapatalk 2
Works thanks but does not rotate
supersain08 said:
Works thanks but does not rotate
Click to expand...
Click to collapse
That's how it was on cm9. Try this https://play.google.com/store/apps/details?id=nl.fameit.rotate
Sent from my SGH-T989 using xda premium
bmakk2055 said:
Plug in to TV then reboot and when phone starts it will pop up on TV
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Works. A bit inconvenient but works nonetheless. Thanks a lot.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Worked for me
Sent from my SGH-T989 using xda premium
Will this work with official cm 10?
Sent from my HTC Ruby using xda app-developers app
aznvi3tric3guy said:
Will this work with official cm 10?
Sent from my HTC Ruby using xda app-developers app
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-T989 using xda premium
tried this and it worked. only issue that remains for me is when the MHL cable loses power or is unplugged, the only way to re-initiate the hdmi-out sync is with a reboot of the device. anyone know of a way to manually trigger a resync?
Can anyone post a flashable fix for this, I am at my uncles house and was planning on watching a movie with my cousins and then I realized my jb ROM doesn't have mhl support :/
Sent from my SGH-T989 using Tapatalk 2
Nismo13 said:
Can anyone post a flashable fix for this, I am at my uncles house and was planning on watching a movie with my cousins and then I realized my jb ROM doesn't have mhl support :/
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
That would be hard because everyone's buildprop is different depending on the rom....
Sent from my SGH-T989 using xda premium
Nvm I figured it out , thanks!
Sent from my SGH-T989 using Tapatalk 2
Anyone have any idea why this isn't directly incorporated into CM10?
bmakk2055 said:
Use a build.prob editor and add the following....
1. com.qc.hdmi_out
2. ro.hdmi.enable
3. Reboot
4. Hit the thanks button if I helped
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
For me, setting "ro.hdmi.enable=true" does the job. I tried your com.qc.hdmi_out line also, but found that I had difficulty getting consistent results, but devices may differ. ROMs earlier than 10.0.0 Stable often crashed after using HDMI, after pulling out the cable, even though the video worked well up till that point. But recent ROMs seems to be stable for me.
It is a frustration for me that those who (probably) know about the deeper aspects of this issue (why it was never turned on in the default configuration) never comment on it, so those who want it to work spend lots of time fiddling with it. On the teamhacksung site, a statement was made that it will never work because it involves proprietary code, but that was some time ago, so who knows? The fact that it works well seems to suggest that all the needed code is present and functional, so the mystery is why it is never addressed by the developers explicitly, or turned on by default, or have a setting to turn it on as Galaxy S had.
jpnelson40 said:
For me, setting "ro.hdmi.enable=true" does the job. I tried your com.qc.hdmi_out line also, but found that I had difficulty getting consistent results, but devices may differ.
Click to expand...
Click to collapse
can you explain what you mean by the not getting consistent results? i'm going to try this approach and see what i get today.
AOKP December 26th nightly
- Removed Launcher2.apk.
- Removed LiveWallpapers.apk.
- Removed .mp4's in "Video" folder, saved 10MB.
- a-GPS patch included thanks to Crypted.
- Removed all Pico-TTS files except US versions.
- Added my build.prop tweaks.
- Added RRNG and Seeder script files to /xbin and /init.d.
- Updated Nova Launcher from 1.3.3 to 1.3.4.
Note : For better battery life, use ROM Toolbox Lite/PRO to underclock and switch your CPU scheduler and I/O scheduler
using SIO/MSC-MSDV.
Thanks to Team_Kang and KAsp3rd for doing these nightlies. You are beyond epic!
Don't forget to flash GAPPS! Latest are available here :
GAPPS :
http://goo.im/gapps/gapps-jb-20121212-signed.zip
ROM Download :
http://www.mediafire.com/download.php?6rjonfyllfiw02b
Please note : Due to the 4.2.1 file layout, your internal sdcard is now located at /0/.
Downloading now
Hows the echo on this rom
Sent from my SGH-T999 using xda app-developers app
Does the headset work during calls?
Ksunnyv1011 said:
Does the headset work during calls?
Click to expand...
Click to collapse
Don't have a headset to test sorry.
People are able to hear me.
Sent from my SGH-T999 using Tapatalk 2
TheLastSidekick said:
Don't have a headset to test sorry.
People are able to hear me.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I'm sorry, I meant headphones can you hear through the headphones during a call?
Ksunnyv1011 said:
I'm sorry, I meant headphones can you hear through the headphones during a call?
Click to expand...
Click to collapse
Through my pair, SkullCandy Skullcrushers yes.
Sent from my SGH-T999 using Tapatalk 2
Sounds awesome... I would also like to know about the echo.
Sent from my SGH-T999 using xda premium
I did have a flicker bug. That's the only thing I've noticed on my end yet.
Sent from my SGH-T999 using Tapatalk 2
TheLastSidekick said:
I did have a flicker bug. That's the only thing I've noticed on my end yet. It doesn't happen normally and I'm not sure what causes it. But there's a fix coming soon I've heard.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Sent from my SGH-T999 using Tapatalk 2
Circle lock screen?
Sent from my SGH-T999 using Tapatalk 2
Are you capable of building your own from source, or just pulling Kasper's build and doing edits? Echo should be the same as other latest builds. I've reported what is going on almost all of those 4.2 builds out there.
Sent from my SGH-T999 using xda premium
What are you suggesting?
mt3g said:
Are you capable of building your own from source, or just pulling Kasper's build and doing edits? Echo should be the same as other latest builds. I've reported what is going on almost all of those 4.2 builds out there.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Capable of pulling from source, yes. But Kasper does a bit more than that, and he's far more advanced than me.
I have no echo, so maybe you should check your radio. All is well for me. Kasper's latest build works wonders.
Edit : In fact, I probably neglected to mention this is now my DD. (Battery is good too)
I don't have echo anymore after the latest commits made by the CM team, was just asking for reading through stuff purposes. Thanks.
Hey i cant get my gallery to read at all so help please
Sent from my SGH-T999 using Xparent Green Tapatalk 2
When i flashed this, all my stuff in my sd card seem to be erased, but check my storage its still there but doesnt show.
Just an idea
There should be an option to swipe to the right in the notification drawer to get to the tile system. Just a thought.
The path may be different. I found my sdcard under /storage/sdcard1
Sent from my SGH-T999 using Tapatalk 2
Very nice & stable ROM TheLastSidekick, thanks for the bake on this one. SMOOTH!
Has anyone successfully compiled the lidroids/Wanams 23 toggle mod for LJ7/MB1 with stock theming?
It has been compiled for LJ7 with mijjah's theme here:
http://forum.xda-developers.com/showthread.php?t=2033061
The international SIII:
http://forum.xda-developers.com/showthread.php?t=2032614
For the Note II:
http://forum.xda-developers.com/showthread.php?t=2022255
If someone hasn't already done this I will when I have a moment attempt to compile it myself. I really only want the blocking/dormant mode toggle. Sadly the 15 toggles do not have it.
Anyone run across one yet?
I haven't seen anything about it for MB1 so go along and take the lead I'm sure it'll be appreciated
Sent from my Nexus 7
Here is a first draft. I believe I got all the icons switched out. It boots fine on top of a few MB1 ROMs. Still has a lot of theming to change. I don't know off hand how to do the rest, but could probably figure it out with help. The menu bar and colors still have the Mijj theming. also, it has the gps localization icon error. Not sure how to fix that, but I believe it's been fixed in some ROMs.
I worked on it some more today. Trying to learn how to do this stuff. I posted a question in mijjah's thread
http://forum.xda-developers.com/showpost.php?p=40232961&postcount=31
Sent from my SPH-L710 using xda app-developers app
@studentjunk
Thanks for all your work. I'm hoping collectively we can get this working. At this point you are above my head on fixing this.
second draft
gps bug is left.
background needs to be changed. otherwise i think it's there. feel free to let me know what else is missing/needs to be changed.
Ok. I figured out the background this morning. The morphology files were helpful. I think that's everything but the gps bug.
Let me know if there is anything else to change while I look for the solution for the gps. I also discovered Dropbox again.
http://db.tt/1nLeASt7
Sent from my SPH-L710 using xda app-developers app
studentjunk said:
Ok. I figured out the background this morning. The morphology files were helpful. I think that's everything but the gps bug.
Let me know if there is anything else to change while I look for the solution for the gps. I also discovered Dropbox again.
http://db.tt/1nLeASt7
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Have you tried talking to wanam? He appears to be helpful in the thread where mijjah got the original mod.
Sent from my SPH-L710 using Tapatalk 2
Nope, just been doing fishing in the files - lots of file comparisons. Doing it more to figure out how things work.
I will poke around some more, and ask for help with it if I don't figure it out. Seems to work just fine.
Sent from my SPH-L710 using xda app-developers app
studentjunk said:
Nope, just been doing fishing in the files - lots of file comparisons. Doing it more to figure out how things work.
I will poke around some more, and ask for help with it if I don't figure it out. Seems to work just fine.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I have your version 8 running on mc3 and totally dig it. Great work.
Sent from my SPH-L710 using Tapatalk 2
dragonsofcp said:
I have your version 8 running on mc3 and totally dig it. Great work.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Well.. I flashed version 8 on stock mc3 rom and now the notification bar is gone. Am I missing something?
Have you tried a reboot?
Sent from my SPH-L710 using Tapatalk 2
dragonsofcp said:
Have you tried a reboot?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Yes. I did twice. I also wiped cache and dalvic cache... still no notification bar!
Sorry to hear it didn't work for you. Restore your nandroid backup and try again. I have only tried it on mb1. Also, I am using twrp recovery. What are you using?
Sent from my SPH-L710 using xda app-developers app
studentjunk said:
Sorry to hear it didn't work for you. Restore your nandroid backup and try again. I have only tried it on mb1. Also, I am using twrp recovery. What are you using?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I did the restore and tried it again with same results. I'm also using twrp recovery. So I'm not sure what I am missing. Do I need modified systemUI.apk?
Edit: I'm on odexed rom if that makes any difference.
bhavi_jp said:
I did the restore and tried it again with same results. I'm also using twrp recovery. So I'm not sure what I am missing. Do I need modified systemUI.apk?
Edit: I'm on odexed rom if that makes any difference.
Click to expand...
Click to collapse
Maybe try a new download.
Edit: Yes I think the odex is the problem. I think the mod was originally made for deodex. Deodexed mc3 version is what I have it running on.
Sent from my SPH-L710 using Tapatalk 2
Yes, deodex only.
Sent from my SPH-L710 using xda app-developers app
Anyone getting this white ugly bar with downloads?
I think I'm done with this mod. Bored of the stock look. Going back to MOAR, which has a new update. I imagine the 23 mod can be incorporated into that, but I don't know how much work that will take.
Sent from my SPH-L710 using xda app-developers app
dragonsofcp said:
Maybe try a new download.
Edit: Yes I think the odex is the problem. I think the mod was originally made for deodex. Deodexed mc3 version is what I have it running on.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
studentjunk said:
Yes, deodex only.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Yep. Odex rom was the issue. It's working fine on deodex rom.
The volume of this room is pretty low. I'm sure it's not the phone as in other roms the volume is much louder. I can barely hear YouTube in a public setting. Lol. Anyone know how to fix this? Thanks!
Sent from my GT-N7105 using xda app-developers app
Maybe give the Viper Modz a try here: http://forum.xda-developers.com/showthread.php?t=2191223
or ask in the thread of the Rom...
Tried in the thread but then there all this is a developer thread! Lol. And will do. Thanks
Sent from my GT-N7105 using xda app-developers app
I believe you can flash the NEAK kernel, then install the uNEAK app from the Market and adjust the volume. Did this last night on PAC-Man rom and volume is nice and loud now
Got it from here:
http://forum.xda-developers.com/showthread.php?t=2000328
Sent from my SGH-I317 using Tapatalk 2
I also use the Neak Kernel with Beanstalk and use the uNeak app from the Playstore. You can adjust the mic, headphones and speaker volumes. If it's compatible with your Rom, might want to give it a try.
slaydog said:
I believe you can flash the NEAK kernel, then install the uNEAK app from the Market and adjust the volume. Did this last night on PAC-Man rom and volume is nice and loud now
Got it from here:
http://forum.xda-developers.com/showthread.php?t=2000328
Sent from my SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Neva Eva Forget 1984 said:
I also use the Neak Kernel with Beanstalk and use the uNeak app from the Playstore. You can adjust the mic, headphones and speaker volumes. If it's compatible with your Rom, might want to give it a try.
Click to expand...
Click to collapse
Kinda wanted to stay on stock kernel but if those viper apps mentioned previously before don't work I'ma have to switch. Thanks guys!
Sent from my GT-N7105 using xda app-developers app
Sebastianq28 said:
Kinda wanted to stay on stock kernel but if those viper apps mentioned previously before don't work I'ma have to switch. Thanks guys!
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Viper works flawlessly on most if not all Rom's!! There's a lot of info on the page. So if you can figure out how to get everything working. That'll be a great accomplishment grasshopper!
Lol
Sent from SKYNOTE using Taptalk 2
Bajanman said:
Viper works flawlessly on most if not all Rom's!! There's a lot of info on the page. So if you can figure out how to get everything working. That'll be a great accomplishment grasshopper!
Lol
Sent from SKYNOTE using Taptalk 2
Click to expand...
Click to collapse
This...^^^^^^^^^.....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Bajanman said:
Viper works flawlessly on most if not all Rom's!! There's a lot of info on the page. So if you can figure out how to get everything working. That'll be a great accomplishment grasshopper!
Lol
Sent from SKYNOTE using Taptalk 2
Click to expand...
Click to collapse
gregsarg said:
This...^^^^^^^^^.....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Click to expand...
Click to collapse
Lol I'm reading through the thread and holy crap. It's somewhat Confusing. Lol and I'm not sure which of the Apps to choose... Or how to find out which cpu type to choose.. So confused! Lol
Sent from my GT-N7105 using xda app-developers app
Sebastianq28 said:
Lol I'm reading through the thread and holy crap. It's somewhat Confusing. Lol and I'm not sure which of the Apps to choose... Or how to find out which cpu type to choose.. So confused! Lol
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Here ya go. This is what I did http://forum.xda-developers.com/showpost.php?p=43953284&postcount=2053
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
So you didn't mess with any setting at all? Just installed the app then added all those files and chose one you likes?
Just to make sure
which of the 2 apps did you download?
What cpu setting did you choose?
Which of the ir files did you like the best? Haha
And thanks a ton man!
Sent from my GT-N7105 using xda app-developers app
Bajanman said:
Here ya go. This is what I did http://forum.xda-developers.com/showpost.php?p=43953284&postcount=2053
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Click to expand...
Click to collapse
gregsarg said:
This...^^^^^^^^^.....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Click to expand...
Click to collapse
Neva Eva Forget 1984 said:
Maybe give the Viper Modz a try here: http://forum.xda-developers.com/showthread.php?t=2191223
or ask in the thread of the Rom...
Click to expand...
Click to collapse
So I found out the ViPER4Android might be the solution to my volume issues. But every time i go to settings > Device > Sound > MUSIC EFFECTS I get an error that says "Unfortunately, Settings has stopped" Anyone getting this? is there a fix?
Sent from my GT-N7105 using xda app-developers app
Sebastianq28 said:
So you didn't mess with any setting at all? Just installed the app then added all those files and chose one you likes?
Just to make sure
which of the 2 apps did you download?
What cpu setting did you choose?
Which of the ir files did you like the best? Haha
And thanks a ton man!
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Ok I'll post what I downloaded..
Sebastianq28 said:
So I found out the ViPER4Android might be the solution to my volume issues. But every time i go to settings > Device > Sound > MUSIC EFFECTS I get an error that says "Unfortunately, Settings has stopped" Anyone getting this? is there a fix?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Ok you may have just installed the wrong one. Delete the one you have installed first. Then reboot and reinstall the new one!
Here's the one I used:
http://db.tt/XTj0YXNH
And you only need one installed!
As far as the other sound file's, I highlighted which one I downloaded from the viper page.
You just have to use a file explorer to move the files to the correct folder!
Once your done, start a song then open viper audio mod. And change your setting! From there...
FYI:
Keep in mind that if you have a Bluetooth earpiece connected. And then if you connect into the headphone jack. It'll default to the Bluetooth sound for you headphone jack. Until you disconnect the Bluetooth. Then it'll default to the headset setting in VIPER..
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Bajanman said:
Ok I'll post what I downloaded..
Ok you may have just installed the wrong one. Delete the one you have installed first. Then reboot and reinstall the new one!
Here's the one I used:
http://db.tt/XTj0YXNH
And you only need one installed!
As far as the other sound file's, I highlighted which one I downloaded from the viper page.
You just have to use a file explorer to move the files to the correct folder!
Once your done, start a song then open viper audio mod. And change your setting! From there...
FYI:
Keep in mind that if you have a Bluetooth earpiece connected. And then if you connect into the headphone jack. It'll default to the Bluetooth sound for you headphone jack. Until you disconnect the Bluetooth. Then it'll default to the headset setting in VIPER..
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Click to expand...
Click to collapse
Ok i Downloaded the file but still have a couple questions.
1. Do I Just use the apk in the file you gave me? or do i need anything else from that folder to install?
2. Once installed what CPU type do I choose for the AT&T Galaxy Note II?
Sebastianq28 said:
Ok i Downloaded the file but still have a couple questions.
1. Do I Just use the apk in the file you gave me? or do i need anything else from that folder to install?
2. Once installed what CPU type do I choose for the AT&T Galaxy Note II?
Click to expand...
Click to collapse
Ok I taught I gave you just the apk.
Here try this one it's the apk only:
http://db.tt/f0spvlYv
But you can use the first one I gave you also. I think I use the file on the right of that zip.
The apk I used was like 1.28mb..
Cpu setting..
After install, open, then install driver. It's the last one on the list A9/15..
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Bajanman said:
Ok I taught I gave you just the apk.
Here try this one it's the apk only:
http://db.tt/f0spvlYv
But you can use the first one I gave you also. I think I use the file on the right of that zip.
The apk I used was like 1.28mb..
Cpu setting..
After install, open, then install driver. It's the last one on the list A9/15..
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Click to expand...
Click to collapse
lol i got the app working and it only BARELY raises the volume and for some reason the tweaks only work on speaker? not an headphone?
Sebastianq28 said:
lol i got the app working and it only BARELY raises the volume and for some reason the tweaks only work on speaker? not an headphone?
Click to expand...
Click to collapse
Then something is wrong. Did you perform a reboot after you installed the driver?
Because all mine work. Headset, speaker, Bluetooth, they all change the sound. If you have some head phones use those to set it up.
What steps do you do. Do you know what to turn on and what not to? All the info is on the viper page!!
Check post#2 the sound setting are there...
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Yes I did the reboot. And the thing is when I tried to set it up with my headphones (audio technica brand) no setting changed any sound. I could turn anything on or off and no change would reflect.
Sent from my GT-N7105 using xda app-developers app
Sebastianq28 said:
Yes I did the reboot. And the thing is when I tried to set it up with my headphones (audio technica brand) no setting changed any sound. I could turn anything on or off and no change would reflect.
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
I'll send you some instructions on how to get it done
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
OK thanks. I'll wait for em
Sent from my GT-N7105 using xda app-developers app