Multiwindow and wallet. - AT&T Samsung Galaxy Note II

Should i accept the multiwindow update today, or should i decline it, im stock rooted and i have the wallet hacked onto it...

Someone in the other thread said they were able to root again after the update...so there is no reason not to accept the update.

SGarnett said:
Someone in the other thread said they were able to root again after the update...so there is no reason not to accept the update.
Click to expand...
Click to collapse
How should i go about getting rid of my Gwallet so it doesnt brick my secure element and everything, or should i leave it

If I was in your shoes, I would just delete it to make sure everything goes smoothly... it might not be necessary to delete, but just to be safe.
I just installed the update and its sweet.

SGarnett said:
If I was in your shoes, I would just delete it to make sure everything goes smoothly... it might not be necessary to delete, but just to be safe.
I just installed the update and its sweet.
Click to expand...
Click to collapse
I tried resetting my gwallet and it wont reset...damn....

Guy's i am rooted and i have attempted to install the Google wallet on my device but have failed several times mad. But i still have the files that have been merged into my /system/data partition (nfc files) and when i tried updating my device earlier today i get it to 25% on the AT&T black logo screen and it said Failed then reboots. Many people who have just root and and are on complete stock have been able to update, but i havent. I am thinks two different things right now 1) Root (impossible, others have had success) and 2) modified NFC files. Somehow or someway these are blocking the OTA update. BTW this what i get.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

slicingtaco said:
Guy's i am rooted and i have attempted to install the Google wallet on my device but have failed several times mad. But i still have the files that have been merged into my /system/data partition (nfc files) and when i tried updating my device earlier today i get it to 25% on the AT&T black logo screen and it said Failed then reboots. Many people who have just root and and are on complete stock have been able to update, but i havent. I am thinks two different things right now 1) Root (impossible, others have had success) and 2) modified NFC files. Somehow or someway these are blocking the OTA update. BTW this what i get.
Click to expand...
Click to collapse
I too had this problem at first and was getting ready to just wipe my phone to go back to full stock but decided to try and reflash stock rom from sammobile. After that, I downloaded the update again. I let it run and behold, it completed successfully. Maybe I was lucky, but give that a shot and let me know if that worked for you. Now I just need to root and setup GW again.
Sent from my GT-N8010 using xda app-developers app

dnanj said:
I too had this problem at first and was getting ready to just wipe my phone to go back to full stock but decided to try and reflash stock rom from sammobile. After that, I downloaded the update again. I let it run and behold, it completed successfully. Maybe I was lucky, but give that a shot and let me know if that worked for you. Now I just need to root and setup GW again.
Sent from my GT-N8010 using xda app-developers app
Click to expand...
Click to collapse
I would hate going thru that processe of backing-up/flashing/restoring data. I would like to enjoy OTA Updates but sadly I can't seem to benefit from that
Sent from my SAMSUNG-SGH-I317

Mine wont pull the update at all, and i cannot find out why =/ just says software upgrade interrupted

slicingtaco said:
I would hate going thru that processe of backing-up/flashing/restoring data. I would like to enjoy OTA Updates but sadly I can't seem to benefit from that
Sent from my SAMSUNG-SGH-I317
Click to expand...
Click to collapse
Me too, but its more convenient than wiping and starting from scratch.
Edit: flashing the stock rom from sammobile via odin did not wipe my phone. All my apps(except GW and root) remained. Of course keep in mind that YMMV.
Sent from my GT-N8010 using xda app-developers app

dnanj said:
Me too, but its more convenient than wiping and starting from scratch.
Edit: flashing the stock rom from sammobile via odin did not wipe my phone. All my apps(except GW and root) remained. Of course keep in mind that YMMV.
Sent from my GT-N8010 using xda app-developers app
Click to expand...
Click to collapse
Wooot explain????
You got stock without wiping (it didn't touch any of your files)???
And were you able to update (multi window)?
Lol one more ? Did it increase/decrease or bring them back to stock anything in download mode aka Odin mode, like "device status" under settings or "system status" in download mode?
Sent from my SAMSUNG-SGH-I317

slicingtaco said:
Wooot explain????
You got stock without wiping (it didn't touch any of your files)???
And were you able to update (multi window)?
Lol one more ? Did it increase/decrease or bring them back to stock anything in download mode aka Odin mode, like "device status" under settings or "system status" in download mode?
Sent from my SAMSUNG-SGH-I317
Click to expand...
Click to collapse
Actually, I tried a few different things to get the update and I believe I went and did unroot, downloaded the update but it still failed. Then I went and downloaded the stock rom from sammobile & flashed via Odin. After the phone started up, everything was back to stock. My phone status still showed modified though.
Anyway, I downloaded the ota update again and let it run and was surprised that it got past 26% and completed.
I eventually hosed it up while trying to setup GW again and wound up wiping the phone because I kept getting nfc service force closed and when I rebooted it got stuck in a boot loop.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

Update is cool....anyone have a hack to get any app to work with multi window and not just select ones??
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

Attention!: Will Not work with modified /system/app .apk's, or /system/lib
Originally Posted by hyjkim
I was able to update my phone with the file that plastikman187 posted. Here's what I did.
0. Root phone with exynos exploit apk.
1. Download the file onto your phone
2. rename it from a .cfg to a .zip (not sure if this is necessary)
3. Use some sort of root file explorer to copy the zip file into the /cache directory. (I used es file explorer with root privaledges).
4. Boot phone into recovery mode by powering off and then holding (vol up + power + home)
5. Choose the apply update via cache option and select the downloaded zip.
6. Some terminal crap will spew out and eventually the phone will restart.
7. Let it boot and soon you'll see the "android is upgrading"
I can confirm that multiwindows works after forcing the update. The flash counter is not modified by rooting and applying the update.
Good luck everyone and enjoy your multiwindows updates . Also screw ATT for making me wait while my girlfriend brags about chatting and watching movies simultaneously.
Click to expand...
Click to collapse
This is what i got
This method above seems to work for other people but for me it revealed on why we get this message:
25-30% on the AT&T update black logo screen and it said "Update Failed" then reboots
So i manually flashed the file thru stock recover with the steps hyjkim provided and got this:
Only to find out exactly why...
Here is the error code example that i got.
Code:
assert failed: apply_patch_check ("/system/app/Nfc.apk", "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx")
E: Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.
It seems that the updates check the SHA-1 hashes of the apk under /system/app and as well under /system/libs
This doesn't have to happen with the Nfc.apk specifically...it could happen with any app in /system/app or in /system/lib
The first one is the hash of the .apk installed on your device.
The second one is the expected hash of the .apk that is expected (perhaps for security reasons)
Cause of this problem:
The reason why i get this (we) because the file was modified from the original state for it to work with Google Wallet.
Solution:
For those of us who messed around with the stock apk's and libs (Google Wallet users)
I have made a solution for the people who don't want to backup/reflash/restore all ur data (what can i say i am lazy)
The files are from the factory .md5 file in which i ripped out and went on a long journey to extract the system.img to get the system files (ur welcome)
Option: 1
Download the attachment below
place it on your sd-card (or some where easily accessible)
replace each file accordindly to the file contetnts (starting with Nfc.apk under "app" folder all the way to lib)
Make sure the permissions are set to rw-rw-r-- (on each file)
reboot (makinging sure its running fine)
Now you have 2 options upgrade via Settings app or Update in recovery (look above on the top of my post).
All should go well (worked for me)
Option: 2
reflash the the factory image thru Odin
Hoped i helped you
Source:
HERE (thanks legom for shedding some light):good:
Sorry guys i am writing all of this after work @ 12:30 am

slicingtaco said:
Attention!: Will Not work with modified /system/app .apk's, or /system/lib
This is what i got
This method above seems to work for other people but for me it revealed on why we get this message:
25-30% on the AT&T update black logo screen and it said "Update Failed" then reboots
So i manually flashed the file thru stock recover with the steps hyjkim provided and got this:
Only to find out exactly why...
Here is the error code example that i got.
Code:
assert failed: apply_patch_check ("/system/app/Nfc.apk", "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx")
E: Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.
It seems that the updates check the SHA-1 hashes of the apk under /system/app and as well under /system/libs
This doesn't have to happen with the Nfc.apk specifically...it could happen with any app in /system/app or in /system/lib
The first one is the hash of the .apk installed on your device.
The second one is the expected hash of the .apk that is expected (perhaps for security reasons)
Cause of this problem:
The reason why i get this (we) because the file was modified from the original state for it to work with Google Wallet.
Source:
HERE (thanks legom for shedding some light):good:
Click to expand...
Click to collapse
That explains why the flash to stock rom allowed me to get the update and install...too bad I hosed up the setup of GW after which led to me being stuck in a boot loop. Ended up wiping my phone anyway.
No regrets though because I was able to get my status to go back to normal again.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

I stayed away from update. I have root and cwm. Inspired by the att update, I looked around and found clean Rom, and recommend anyone hesitant in downloading the update from att to get this Rom. This has everything including a better battery life and more snappy home screen.
However I haven't gotten Google wallet working, I will probably use the Verizon method.
Good luck!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

I updated my post with a fix:victory::good:
:laugh::good::angel:
I finally got myself out of the hole in this one, hopefully i can do the same for others...
this method will completely avoid backing up data/reflashing/restoring (lazy)

slicingtaco said:
I updated my post with a fix:victory::good:
:laugh::good::angel:
I finally got myself out of the hole in this one, hopefully i can do the same for others...
this method will completely avoid backing up data/reflashing/restoring (lazy)
Click to expand...
Click to collapse
so....is google wallet working?

had high hopes
slicingtaco said:
Attention!: Will Not work with modified /system/app .apk's, or /system/lib
This is what i got
This method above seems to work for other people but for me it revealed on why we get this message:
25-30% on the AT&T update black logo screen and it said "Update Failed" then reboots
So i manually flashed the file thru stock recover with the steps hyjkim provided and got this:
Only to find out exactly why...
Here is the error code example that i got.
Code:
assert failed: apply_patch_check ("/system/app/Nfc.apk", "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx")
E: Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.
It seems that the updates check the SHA-1 hashes of the apk under /system/app and as well under /system/libs
This doesn't have to happen with the Nfc.apk specifically...it could happen with any app in /system/app or in /system/lib
The first one is the hash of the .apk installed on your device.
The second one is the expected hash of the .apk that is expected (perhaps for security reasons)
Cause of this problem:
The reason why i get this (we) because the file was modified from the original state for it to work with Google Wallet.
Solution:
For those of us who messed around with the stock apk's and libs (Google Wallet users)
I have made a solution for the people who don't want to backup/reflash/restore all ur data (what can i say i am lazy)
The files are from the factory .md5 file in which i ripped out and went on a long journey to extract the system.img to get the system files (ur welcome)
Option: 1
Download the attachment below
place it on your sd-card (or some where easily accessible)
replace each file accordindly to the file contetnts (starting with Nfc.apk under "app" folder all the way to lib)
Make sure the permissions are set to rw-rw-r-- (on each file)
reboot (makinging sure its running fine)
Now you have 2 options upgrade via Settings app or Update in recovery (look above on the top of my post).
All should go well (worked for me)
Option: 2
reflash the the factory image thru Odin
Hoped i helped you
Source:
HERE (thanks legom for shedding some light):good:
Sorry guys i am writing all of this after work @ 12:30 am
Click to expand...
Click to collapse
didnt work for me. still getting error 7 but related to emmc:dev/block/mmcblK0p7 looking there the file is "param"

mejori said:
so....is google wallet working?
Click to expand...
Click to collapse
After you revert the files back to stock and update. Then you can repeat the installing process of GW again.

Related

[Q] Voicemail: An optional upgrade is now available.

So I've got this notification that will not go away. (clearing does nothing).
When I tap on it, it says it's downloading an upgrade to what appears to be stock voicemail mail. When done, it asks
Code:
This is a system application. Do you still want to replace it?
All previous user data will be saved.
When I hit "OK", I get the standard install approval screen, hit "install", then get bounced to a screen that just says "Application not installed" with just a "done" on the bottom.
Seeing as how I use Google Voice for my voicemail and not sprint, I could care less about the regular voicemail app, but being able to get rid of the notification would be great.
Any help in trying to remove this annoying notification would be awesome.
Thanks!
Just delete the sprint vvm.apk from /system/ and that should do it.
I'm having the exact same problem. I've tried moving the vvm apk out from underneath after the download finishes and the install is about to start, and no joy. I still get "not installed."
Thoughts?
I'm guessing that I have to remove this file using something other than Astro? Keeps telling me that it can't delete files, looks like the permissiosn are read only, and I can't find a way to change the permissions.
You need to be rooted to write to system. Then you can use adb or root explorer.
Sent from my FROYO'D EVO using xda app
If you're using a custom ROM Sprint stuff may not update because the developer of your ROM signed it. Check for updates with your ROM developer (website or an update tool), most of the developers have already made their own VVM update from Sprint's release.
Just another hole to cover so we can't root, just a thought.
Same problem here. Renaming the .apk via adb then rebooting did the trick.
Guys, I figured this one out today.
I got the same "unable to install" message when I tried to install the new one. First thing I did, was uninstall the stock one using Titanium backup, but any method should work the same. Then rebooted the phone and tried the install again.
It went through with no problems. Check my sig for info, but I think this should work with any custom ROM.
Also, please note that I had a copy of the install file on my SD card and I accessed it via EStrongs file explorer. Again, I don't think it matters which file explorer you use, but having it on your SD card may be the key.
Edit: I used this link to get the file on my SD card:
http://forum.xda-developers.com/showpost.php?p=7749762&postcount=44
I cant get this ****e to install using netarchy's stock rooted froyo rom. ive tried everything, i just get a heaping portion of failure.
m03sizlak said:
I cant get this ****e to install using netarchy's stock rooted froyo rom. ive tried everything, i just get a heaping portion of failure.
Click to expand...
Click to collapse
Did you follow my previous post?
1) DL the file on the link I provided from another thread on here.
2) Mount your SD as disk drive and click and drag it onto your SD card.
3) Uninstall the current voicemail app on your phone (if you don't have Titanium backup paid version, you will need to use Astro or another app that can uninstall apps from the phone)
4) Reboot your phone.
5) Use a file explorer to find the zip file you put on your phone, and install it.
You should be good to go.
rugedraw said:
Did you follow my previous post?
1) DL the file on the link I provided from another thread on here.
2) Mount your SD as disk drive and click and drag it onto your SD card.
3) Uninstall the current voicemail app on your phone (if you don't have Titanium backup paid version, you will need to use Astro or another app that can uninstall apps from the phone)
4) Reboot your phone.
5) Use a file explorer to find the zip file you put on your phone, and install it.
You should be good to go.
Click to expand...
Click to collapse
I followed these instructions step by step and I can get the voicemail app to load but it doesn't work. I don't get my messages, I hit the "check for updates" button and get a box that comes up and tells me there was a general error. I've updated my profile and my prl. Please let me know what I need to do to get this fixed. I'm on BS 1.5.
Thanks in Advance
akt27x said:
I followed these instructions step by step and I can get the voicemail app to load but it doesn't work. I don't get my messages, I hit the "check for updates" button and get a box that comes up and tells me there was a general error. I've updated my profile and my prl. Please let me know what I need to do to get this fixed. I'm on BS 1.5.
Thanks in Advance
Click to expand...
Click to collapse
Well, I am not an expert by any means. I can tell you that this worked for me the first time I tried it. By any chance, can you install the old version back on? Or, did you back-up your ROM in any way where you can go back to the way your phone was before you started so at least the old app is on there and working?
If not, hopefully someone can chime in who knows more on the subject.
easiest way of fixing this should be to use SteelH's flashable vvm update zip found on his rom thread here;
http://forum.xda-developers.com/showthread.php?t=743781
I think it works on any rom.
fachadick said:
easiest way of fixing this should be to use SteelH's flashable vvm update zip found on his rom thread here;
http://forum.xda-developers.com/showthread.php?t=743781
I think it works on any rom.
Click to expand...
Click to collapse
I did the following steps and still no go.
1. Flashed SteelH's zip.
2. Updated my profile.
3. Updated my prl.
4. Rebooted.
5. Called my cell and left two voicemails.
I never got a notitication and when I try to check for updates I get a general error. And when I hit the button to change my greeting, a box comes up saying it will connect me with my voicemail, but nothing ever happens.
I found an old version of the voicemail app and tried that and I get the same results. I must be doing something wrong or there is something wrong with my phone.
Any ideas for me to try, would be greatly apperciated.
akt27x said:
I did the following steps and still no go.
1. Flashed SteelH's zip.
2. Updated my profile.
3. Updated my prl.
4. Rebooted.
5. Called my cell and left two voicemails.
I never got a notitication and when I try to check for updates I get a general error. And when I hit the button to change my greeting, a box comes up saying it will connect me with my voicemail, but nothing ever happens.
I found an old version of the voicemail app and tried that and I get the same results. I must be doing something wrong or there is something wrong with my phone.
Any ideas for me to try, would be greatly apperciated.
Click to expand...
Click to collapse
Sorry - that link will only solve the issue in the OP - how to update to the latest version of vvm (v5.1.0.34), and get rid of notifications that a new version of vvm is available.
You're having a different issue - you're having an issue getting your message notifications. Can't help you with that one.
I just restored back to a version of BS 1.3 I backed up on Monday and my voicemail worked. But I got the voicemail upgrade message so I then flashed SteelH's voicemail zip and it now works perfect. I get my messages and notifications. Now I guess I try to load BS 1.5 again. But that'll wait until another day, I don't have the time now to completely wipe my phone and set it back up.
Thanks for the help.
akt27x said:
I just restored back to a version of BS 1.3 I backed up on Monday and my voicemail worked. But I got the voicemail upgrade message so I then flashed SteelH's voicemail zip and it now works perfect. I get my messages and notifications. Now I guess I try to load BS 1.5 again. But that'll wait until another day, I don't have the time now to completely wipe my phone and set it back up.
Thanks for the help.
Click to expand...
Click to collapse
no prob - and BS 1.5 includes the latest vvm too, so you won't need to use that zipfile again.
edit - just noticed you were on BS before all of this - I guess it was those other steps that messed things up for you.
I don't know what happened. I was working fine until I went to BS 1.5. When I went to BS 1.5 the notification to upgrade my voicemail was gone but my voicemail didn't work, that's when I started not getting my messages or notifications. And then I started trying to load different versions of the voicemail app and trying different things. But I agree with you, it's probably something I did while setting my phone back up after BS 1.5 and didn't know I did it.
Thanks again.
rugedraw said:
Guys, I figured this one out today.
I got the same "unable to install" message when I tried to install the new one. First thing I did, was uninstall the stock one using Titanium backup, but any method should work the same. Then rebooted the phone and tried the install again.
It went through with no problems. Check my sig for info, but I think this should work with any custom ROM.
Also, please note that I had a copy of the install file on my SD card and I accessed it via EStrongs file explorer. Again, I don't think it matters which file explorer you use, but having it on your SD card may be the key.
Edit: I used this link to get the file on my SD card:
http://forum.xda-developers.com/showpost.php?p=7749762&postcount=44
Click to expand...
Click to collapse
Hey man that worked like a charm!
Thanks!

Working Tap and Pay In Google Wallet

Ok so I can now confirm that Tap and Pay in google Wallet can work.
Just used it and am Drinking Redbull Purchased from 7-Eleven 10 mins ago.
I used the attached modified APK ( done by Loserskater) from this thread http://forum.xda-developers.com/showpost.php?p=45710314&postcount=3276
Quick step by step
I am using EclipticOne Rom
1 Go to Manage apps and delete all data for installed wallet app
2 Used Titanium to uninstall app since it is a system app.
3 Reboot to recovery and wipe Dalvik Cache (and as safety measure I also wiped Cache not sure it's ness)
4 Used ES file explorer (root explorer will do the job as well) And Moved modded apk to system/app and changed permissions to rw- r-- r--
5 reboot phone
6 open wallet let it do its thing And when finished top box on screen said setup Tap and Pay so i did so. ( should mention I already have wallet acct and used on S3 previously so did not need to add or pick a card)
7 app said setting up tap and pay this will take several minutes. Closed app set phone down did other things for about 10mins. Came back opened app said tap and pay is setup !!!!
8 went to settings>about and saw Device is ready for tap and pay purchases under the Tap And Pay heading.
9 closed app and updated via play store since current version is 14 not 9 like modded apk
10 reboot Profit !!! Ran to store got redbull for busy night ahead
Again this MOD is not mine it was done by Loserskater
I should mention I have a the NFC sim from Verizon. Not sure if it is required would need input from those without it. I suspect it is as it supposedly has a secure element of its own.
P.S. Do not Log out of Wallet after update it will likely stop working if you do
Wow its actually says it works... Will update when I actually try it out. Thanks man. Oh and I'm also using EclipticONE.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT: After some trial and error, I got it to work perfectly. Tested at Rite Aid with success!
When I try to move the apk to system apps it says permission denied???
Click to expand...
Click to collapse
I had the same error with ES and used Root Browser to successfully move the apk and change the permissions.
aviola7x7 said:
Just verified that this method does NOT work on the stock rom. I'm probably going to hold out for a Venom release but just wanted to verify that this does not work on stock.
I was under the impression that the secure element in the SIM card could not be used for Wallet but if you have it running successfully, that's awesome.
Click to expand...
Click to collapse
Did the app say that tap and pay was set up and ready to use? I'm on stock rom and it says it is ready to go but I haven't tried it out yet. I will walk down to the store in a little bit to try it out.
HTC One s-off
Lexworth said:
Did the app say that tap and pay was set up and ready to use? I'm on stock rom and it says it is ready to go but I haven't tried it out yet. I will walk down to the store in a little bit to try it out.
HTC One s-off
Click to expand...
Click to collapse
For me it said that tap and pay was not available. But it worked for you, huh? I'll go through the process again and see if I might have made a mistake somewhere.
aviola7x7 said:
For me it said that tap and pay was not available. But it worked for you, huh? I'll go through the process again and see if I might have made a mistake somewhere.
Click to expand...
Click to collapse
It failed the first time I did it but then I said try again and now it works.
aviola7x7 said:
Just verified that this method does NOT work on the stock rom. I'm probably going to hold out for a Venom release but just wanted to verify that this does not work on stock.
I was under the impression that the secure element in the SIM card could not be used for Wallet but if you have it running successfully, that's awesome.
I had the same error with ES and used Root Browser to successfully move the apk and change the permissions.
Click to expand...
Click to collapse
On first use of ES you need to go to tools root explorer and set it to mount system as rw (read and write ) not RO (read only )
then should be able to do it with no problem
But ES is not required Root explorer does same thing i just prefer ES
Confirmed to work on stock rom. Just used it at 7-eleven.
HTC One s-off
Lexworth said:
Confirmed to work on stock rom. Just used it at 7-eleven.
HTC One s-off
Click to expand...
Click to collapse
Looks like it's not the app but Google has finally updated the app itself. Just downloaded from the market and everything is working when tap and pay.
I'm having a problem now. I installed it on Vanir, worked perfectly.. Installed a nightly build which had force close problems so I reinstalled my ROM, which in turn uninstalled wallet, tried the exact same method as before, yet tap to pay is gone. Any ideas?
mracrawford said:
I'm having a problem now. I installed it on Vanir, worked perfectly.. Installed a nightly build which had force close problems so I reinstalled my ROM, which in turn uninstalled wallet, tried the exact same method as before, yet tap to pay is gone. Any ideas?
Click to expand...
Click to collapse
That guy above said that installing it from the play store will get you tap to pay.
Chilidog said:
That guy above said that installing it from the play store will get you tap to pay.
Click to expand...
Click to collapse
I just downloaded it from the play store and Tap to pay isn't enabled and won't work
Sent from my M7 using Tapatalk
Zynesterysdan said:
I just downloaded it from the play store and Tap to pay isn't enabled and won't work
Sent from my M7 using Tapatalk
Click to expand...
Click to collapse
Hmm... So when you tried it the same method again what happened?
YouRuckinFetard said:
Looks like it's not the app but Google has finally updated the app itself. Just downloaded from the market and everything is working when tap and pay.
Click to expand...
Click to collapse
This is not true for verizon users, unless you change your prop.build manually prior to downloading from market. Essentially telling the app its a different phone
mracrawford said:
I'm having a problem now. I installed it on Vanir, worked perfectly.. Installed a nightly build which had force close problems so I reinstalled my ROM, which in turn uninstalled wallet, tried the exact same method as before, yet tap to pay is gone. Any ideas?
Click to expand...
Click to collapse
You will probably need to go to wallet on your pc and deactivate your device. Then retry making sure to wipe data from the app prior to uninstalling it. Do a full reboot then continue
I have been able to install the modfied app by flashing it right after flashing a rom (before reboot)
Sent from my HTC6500LVW using XDA Premium 4 mobile app
For those of you having trouble copying the app. Either open a terminal emulator or connect to your computer (preferred) and run adb shell.
Enter following command to mount system read/write and allow copy:
"mount -o remount,rw /system"
Copy the file either via shell or es file explorer.
Reboot or type: "mount -o remount,ro /system" to make sure system is read only again.
After reboot, run wallet and follow OP instructions.
I've got my phone set up and tap and pay activated. Works like a charm. I DO NOT have a NFC sim. I have my original SIM from my Thunderbolt cut down.
Sent from my HTC6500LVW using Tapatalk 2
Was having issues with it working properly. It would copy for me, and install the app w Reboot, but 'Tap and Pay' wasn't working (even though devices showed it as a GNex).
In order to get rid of everything (I had previously tried to install it) I had to:
Install the app from the play store
THEN clear the cache/data
THEN uninstall it (I did NOT use Ti for this, I deleted it from system/apps and data/apps using Root Explorer)
I also cleared the device from Google Wallet online (Disable > Remove)
I think the prior version I tried to install had some lingering data that was bad? Who knows. Didnt really want to deal with a factory reset though..
I did NOT use the APK from this thread, I used the one from here: Method 3 - AOSP. I dont think that matters.
Worked fine after that by copying the APK then reboot. (did not wipe dalvik/cache! Though Im not sure that really matters either.)
I havent tested it in a store yet, but I cant imagine Ill run into any issues.
Running:
S-Off, Root, Cyanogenmod 10.2
Stock HTC One SIM (So, not a "secure" VZW SIM if I understand correctly)
Hope this clears things up for anyone still having issues
3nderr said:
Was having issues with it working properly. It would copy for me, and install the app w Reboot, but 'Tap and Pay' wasn't working (even though devices showed it as a GNex).
In order to get rid of everything (I had previously tried to install it) I had to:
Install the app from the play store
THEN clear the cache/data
THEN uninstall it (I did NOT use Ti for this, I deleted it from system/apps and data/apps using Root Explorer)
I also cleared the device from Google Wallet online (Disable > Remove)
I think the prior version I tried to install had some lingering data that was bad? Who knows. Didnt really want to deal with a factory reset though..
I did NOT use the APK from this thread, I used the one from here: Method 3 - AOSP. I dont think that matters.
Worked fine after that by copying the APK then reboot. (did not wipe dalvik/cache! Though Im not sure that really matters either.)
I havent tested it in a store yet, but I cant imagine Ill run into any issues.
Running:
S-Off, Root, Cyanogenmod 10.2
Stock HTC One SIM (So, not a "secure" VZW SIM if I understand correctly)
Hope this clears things up for anyone still having issues
Click to expand...
Click to collapse
Thanks!! This worked perfectly on VanirAOSP. Going to try to buy a drink at the vending machine and I will report back.
EDIT: Did not work on the vending machine. I have an NFC capable credit card and that worked fine so there is nothing wrong with the machine. Disappointing!
Frankie1588 said:
Thanks!! This worked perfectly on VanirAOSP. Going to try to buy a drink at the vending machine and I will report back.
EDIT: Did not work on the vending machine. I have an NFC capable credit card and that worked fine so there is nothing wrong with the machine. Disappointing!
Click to expand...
Click to collapse
I tested mine last night. Worked just fine at 7-11. No secure element SIM here either.
isdnmatt said:
I tested mine last night. Worked just fine at 7-11. No secure element SIM here either.
Click to expand...
Click to collapse
What's weird is that nothing happens when I tap to pay. The machine doesn't recognize any contact. On the previous Google Wallet mod a month or two ago, it would register the contact but the payment would fail.
What ROM are you using?

[Q] Crashed my SystemUI.apk

Guys can you help me out,
I was trying to edit SystemUI.apk with this tuto http://forum.xda-developers.com/showthread.php?t=2527867 Then I needed to put it on my phone following this tuto http://forum.xda-developers.com/showthread.php?t=2235956
Now my phone keeps putting "Unfortunately, System UI has stopped." I tried rebooting, same thing. What did I do wrong? Maybe in the signing? The video tutorial used "zipalign -fv 4 ...." command while I read on other tutorials you should copy the original manifest and I don't know which files but in the video he didn't do it...
Please help, the error message keeps coming in the way and I can't to anything.
LG Nitro HD, CM 10.1.3 Wind kernel.
EDIT: I managed to have access to CWM by fast clicking before the error appears so I could reboot into recovery, does this help?
EDIT 2: The video told us to replace old meta-inf and android manifest in the new apk but he didn't show it so I didn't do it, was that the problem?
Truepeace said:
Guys can you help me out,
I was trying to edit SystemUI.apk with this tuto http://forum.xda-developers.com/showthread.php?t=2527867 Then I needed to put it on my phone following this tuto http://forum.xda-developers.com/showthread.php?t=2235956
Now my phone keeps putting "Unfortunately, System UI has stopped." I tried rebooting, same thing. What did I do wrong? Maybe in the signing? The video tutorial used "zipalign -fv 4 ...." command while I read on other tutorials you should copy the original manifest and I don't know which files but in the video he didn't do it...
Please help, the error message keeps coming in the way and I can't to anything.
LG Nitro HD, CM 10.1.3 Wind kernel.
EDIT: I managed to have access to CWM by fast clicking before the error appears so I could reboot into recovery, does this help?
EDIT 2: The video told us to replace old meta-inf and android manifest in the new apk but he didn't show it so I didn't do it, was that the problem?
Click to expand...
Click to collapse
Reinstall, your Rom. Next time make a backup 1st.
Sent from my LG-P930 using xda app-developers app
Swetnes said:
Reinstall, your Rom. Next time make a backup 1st.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
I re edited systemui.apk with signing this time then I put it in a flashable zip file the author of the status bar modding gave me and then I sideloaded it in CWM and flashed it. Now I can use my phone but my status bar has disappeared.
What do you advise me to do? To reflash the original SystemUI.apk of my rom? I will try all this tomorrow.
Edit: I forgot to say that I had disabled SystemUI because if I enable it the error will come again.
So I tried to I tried reputting my original SystemUI.apk and flashing it but I still didn't have the toolbar and the crashes. So I think I am gonna reinstall my ROM like you said.
Solved
Finally I made it
I factory reset the phone and wiped cache but the root was gone so I re rooted it and reflashed my custom rom and gaaps and kernel,
Then I followed this tuto http://forum.xda-developers.com/showthread.php?t=2203166 that was much simpler and easier than the video one I saw previously for editing systemUI.apk and how to compile/recompile.
I pushed it through via file manager after I set the correct permissions and rebooted my phone. Now the status bar has my text in it

New update?

Is anyone else getting prompted for a system update? I'm rooted so I don't want to install. Update is 154.6 MB.
UPDATE: DO NOT install the update if you don't have stock recovery. You will end up in a boot loop.
Sent from my LG-D851 using XDA Free mobile app
Lol I just created a thread myself! I am rooted and custom rom so I am totally waiting.
i just got it too, it said android update but I'm not entirely sure what it's for
InsaneJester17 said:
Is anyone else getting prompted for a system update? I'm rooted so I don't want to install. Update is 154.6 MB.
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
I also did, I am on sky rom and it probably won't work, but I don't want to try to install it.
Well its quite a small update at 154 mb
Installed update
Hey guys I just installed the update and it broke my root :cyclops:
Were you able to root again?
Apparently it's D85110m update. So it's updating from D85110c to m. The person that I saw that updated hadn't rooted so no clue on the rooting thing.
Count me in the group with system update notification. I got rid of it by installing xposed module GravityBox, going under status bar settings - ongoing notification blocker - Google Play services (picture looks like that of update) - reboot.
I don't know what other notifications this may block, but for now, it gets rid of that. Also of note, I would NOT take the OTA. Usually it breaks root and/or bootloops you.
HELP
So in my half awake brilliance, I installed the update. My phone is now boot cycling to the TWRP recovery. Any ideas?
zcgofaster said:
Were you able to root again?
Click to expand...
Click to collapse
I haven't tried to re-root yet. I was rooted with stump root earlier. Stump root doesn't work again because it thinks that my phone is already rooted. I'm going to do some light battery tests before trying to root again, this time with purple drake.
Maybe i might restore the slimkat alpha and hide there until this gets sorted out
I decided not to update to fear my bootloader/root so I tried to extract this with file manager and kept crashing. I can only post the name of the file but above users are correct contains 10m from 10c hopefully devs can find out exactly what's in the update. b1847cae892006ffa11c6822a408fe8528142a54.D85110c_00-D85110m_00_update.zip
thiefinthenight said:
So in my half awake brilliance, I installed the update. My phone is now boot cycling to the TWRP recovery. Any ideas?
Click to expand...
Click to collapse
I would try and follow this guide:
http://forum.xda-developers.com/showthread.php?t=2818667
Wonder if i could do a restore and keep wifi off so it won't download
hawkstwelve said:
I would try and follow this guide:
http://forum.xda-developers.com/showthread.php?t=2818667
Click to expand...
Click to collapse
Will this reset the phone? Will I lose all data?
thiefinthenight said:
Will this reset the phone? Will I lose all data?
Click to expand...
Click to collapse
I believe so yes. But if you are truly bootlooping, I don't believe you have many (if any) other choices than wiping clean and starting fresh.
I'm all stock so I upgraded.
It is in fact D85110m
I've only had it up and running for a few minutes and I already noticed two things.
- There is a slider feature added to the lock screen to instantly open the camera.
- I didn't think the phone was sluggish or laggy out of the box but I immediately could tell it runs smoother now with transitions between screens/apps. e.g. There used to be a bit of lag when opening the Recent Apps. Not anymore.
We'll see how it goes.
The IR blaster works better for me now. I guess the update made it more powerful somehow.
if you have twrp installed or have modified /system you should not take this OTA. if on twrp things will get weird(as evidenced above..) and if removing/modding any default files in /system the zip will most likely fail.. as it checks for all original files first before the OTA update gets patched in.
as for the twrp issue.. I can only assume that it's due to the update/phone expecting stock recovery... and not getting it. there are flags set in the phone that tell the phone what mode to boot into... since you dont have stock recovery the phone is confused. check out this thread - http://forum.xda-developers.com/showthread.php?t=2451696
the fota and misc partitions are tied to this... try to zero out fota first. if that alone doesnt let you out of twrp... you may need to wipe misc. be sure to backup any partition to computer(dont just save on phone sdcard.. never know when it could get wiped..) before erasing anything.
as for this update(10m)... anyone taking it should be careful that the bootloader/downgrades have not been locked/blocked. I'll be waiting for others to take that risk first before even considering taking the ota.
*update* can confirm update is safe.. bootloader is not locked.. still rootable.
as for root... I doubt purple drake is blocked.. but is possible. I'm very sure Stump is still available as an option(tho app may need update).
if you got the update and dont want to take it.. and want the notification gone you should be able to use a file explorer to delete the update zip from the the /cache directory... as well as rename the LGFOTA.apk file in /system to LGFOTA.apk.bak.
I can also confirm that disabling OTA updates in the hidden menu works. the moment I set it back to "on" (i set mine to off day 1) and rebooted the update came in.
d851 hidden menu > wlan test > ota setting > off > reboot (if you have been notified of an available update do NOT reboot until you have deleted the ota zip first)

FoxMod HTC Desire 612 First Custom ROM

EDIT
I have moved this here
http://forum.xda-developers.com/htc...custom-rom-t3355546/post66282333#post66282333
And now the link!
this is where i will be putting all the files
https://goo.gl/msJuFh
How to install:
1: unzip folder to TWRP backup folder
2: restore "foxmod" backup from twrp
3: wipe data and caches
4: reboot and enjoy!
Note: if an app crashes with "an error occored installing "blah blah blah" please uninstall the app then re install the app" you need to convert the app to a user app using the system app manager then convert it back to a system app using the same tool
For future use
Known Issues
Camera doesnt work (advice on how to fix welcome)
com.google.gapps crash on some devices (not sure why)
Future Plans
Restore AOSP settings and menu themes.
Bake in a tool to backup and restore App data and Executables
Bake in adblocking hosts file
Bake in universal GSM unlock if possable (http://www.internauta37.altervista.org/en/patch-fully-enable-gsm-cdma-global-phones-android)
Changelog
V1 Initial release
V2
removed plume premium unlocker
added xposed framework
added youtube adaway (xposed module)
added dropbox
fixed photos crash
A list of apps ive built in
Adblock plus
Swiftkey
System App Manager
System Cleaner
TWRP Manager
Chrome
CCleaner
ClockSync
BuildProp Editor
Terminal Emulator
Hangouts
Messenger (facebook)
Gif keyboard
Google Play Services (latest)
Hangouts dialer (latest)
Autorun Manager
Total Commander
SuperSU
Google Play Music (latest)
Google Voice (latest)
All the htc stuff updated
you can just remove stuff you dont want using system app manager
and a butt load of other things C:
Thanks for be the first to develop roms for Desire 612. Mine have no OS because by mistake I deleted it and now Im trying to install your ROM. For some reason when I enter into restore tab it didnt see the file but Im still working on it. Again thanks
Yokomojoyo said:
Thanks for be the first to develop roms for Desire 612. Mine have no OS because by mistake I deleted it and now Im trying to install your ROM. For some reason when I enter into restore tab it didnt see the file but Im still working on it. Again thanks
Click to expand...
Click to collapse
you have to unzip it there is a foxmod folder in the zip file put it in TWRP/backups/HT4ATSK00191/ the HT4ATSK00191 part might be different for you let me know what yours is so i know if its unique to the device or the same on all 612s and make sure your showing the drive you put it on C:
hi,
I have successfully installed the custom ROM. All that remains is enabling GSM on it
vooks said:
hi,
I have successfully installed the custom ROM. All that remains is enabling GSM on it
Click to expand...
Click to collapse
i dont beleve that is possable sadly the desire 612 is sim locked on all roms currently btw please uninstall plume premium from the system using the system app manager i inadvertantly left it in there lol
@fennectech,
There is a patch for enabling GSM on CDMA phones
http://forum.xda-developers.com/showthread.php?t=2394689
I'm getting this error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
vooks said:
@fennectech,
There is a patch for enabling GSM on CDMA phones
http://forum.xda-developers.com/showthread.php?t=2394689
I'm getting this errorhttps://www.androidpit.com/process-com-google-process-gapps-has-stopped-fix
Click to expand...
Click to collapse
hmm give the new version a try? dunno why it would do that also try a factory reset and see if its stil happening
edit ive also found this too
https://www.androidpit.com/process-com-google-process-gapps-has-stopped-fix
if it dont work go through the steps to reproduce it (from installing the rom) so i can try to recreate it on my end
another edit
i did not see if after donig a factory reset myself so im unsure whats causing it did you install that GSM patch? it might not get along with HTC sense or something verizon has in there i havent found yet
@fennectech,
I applied the GSM patch but im still not getting a signal although I have USSD codes.
I have restarted, factory reset and all but i'm still getting the error. I have reinstalled the ROM and am getting the same results
Please note I got the errors before I applied the GSM patch.
Something else, the camera is gone, not working
Can I request something from you, Please back up one stock ROM of a 612 and share it with me, I'd rather go back to stoc.k. My backup is messy Thank you for your noble work
I am trying to install it as well. I have TWRP installed with a 2.8.7 recovery image and when I try to peform a backup, it only brings me back to the fastboot menu. Never does an actual backup. So, therefore, there is no TWRP/backups folder to put the files in. I have tried doing a restore as well using the image but not luck. It tells me it's going to reboot but same thing, it just reboots to the fastboot menu. It is rooted and S-Off already using Sunshine
Any suggestions?
vooks said:
@fennectech,
I applied the GSM patch but im still not getting a signal although I have USSD codes.
I have restarted, factory reset and all but i'm still getting the error. I have reinstalled the ROM and am getting the same results
Please note I got the errors before I applied the GSM patch.
Something else, the camera is gone, not working
Can I request something from you, Please back up one stock ROM of a 612 and share it with me, I'd rather go back to stoc.k. My backup is messy Thank you for your noble work
Click to expand...
Click to collapse
im sorry i dont have a copy of stock :/ or ida uploaded it allready googles been no help on findng one too :/ you could try the version of twrp i had i stuck it in the folder with the rom
jmonroe said:
I am trying to install it as well. I have TWRP installed with a 2.8.7 recovery image and when I try to peform a backup, it only brings me back to the fastboot menu. Never does an actual backup. So, therefore, there is no TWRP/backups folder to put the files in. I have tried doing a restore as well using the image but not luck. It tells me it's going to reboot but same thing, it just reboots to the fastboot menu. It is rooted and S-Off already using Sunshine
Any suggestions?
Click to expand...
Click to collapse
if the folders dont exist try creating them you can also make a backup using twrp to create the folders
also i tossed the version of TWRP im using into the folder with the rom you can flash it with fastboot
fennectech said:
im sorry i dont have a copy of stock :/ or ida uploaded it allready googles been no help on findng one too :/ you could try the version of twrp i had i stuck it in the folder with the rom
Click to expand...
Click to collapse
The camera is dead..completely
You mean before restoring to this ROM of yours you had not backed up?
fennectech said:
hmm give the new version a try? dunno why it would do that also try a factory reset and see if its stil happening
edit ive also found this too
https://www.androidpit.com/process-com-google-process-gapps-has-stopped-fix
if it dont work go through the steps to reproduce it (from installing the rom) so i can try to recreate it on my end
another edit
i did not see if after donig a factory reset myself so im unsure whats causing it did you install that GSM patch? it might not get along with HTC sense or something verizon has in there i havent found yet
Click to expand...
Click to collapse
jmonroe said:
I am trying to install it as well. I have TWRP installed with a 2.8.7 recovery image and when I try to peform a backup, it only brings me back to the fastboot menu. Never does an actual backup. So, therefore, there is no TWRP/backups folder to put the files in. I have tried doing a restore as well using the image but not luck. It tells me it's going to reboot but same thing, it just reboots to the fastboot menu. It is rooted and S-Off already using Sunshine
Any suggestions?
Click to expand...
Click to collapse
vooks said:
The camera is dead..completely
You mean before restoring to this ROM of yours you had not backed up?
Click to expand...
Click to collapse
I lost my backup to a dead SDCARD :/ so im actually looking for a stock rom (or at least something to work from) if soneone could find a stock rom for me to use to fix the camera?
I still need a copy of the devices stock rom i need to fix the camera but i cant without stock.
Moderator Information,
Thread has been closed as there is now a new thread in the development section.

Categories

Resources