Related
Updating...
if your looking for the old v6_supercharger for samsung galaxy Y gt-s5360 just click this link
V6
chenilen said:
4. 3rd Party Keyboard (Incase Stock won't work as it in my case)
Click to expand...
Click to collapse
not only in your case. here too, swype or 3rd party keyboards needed to be used to use "script manager" and other command shell consoles.
there is some issue with the input method in the SGY, standard SGY keyboard does not work with those - no keypresses will have any effect with those.
---------- Post added at 09:53 AM ---------- Previous post was at 09:41 AM ----------
chenilen said:
2. Locate where is the script in your SDcard. Press then click the SU image, if its green, you're good to go. Press RUN.
Click to expand...
Click to collapse
you mean to say: run the script as root - i.e. with root privileges - else it won't work. if you run it via adb wireless shell, type su before you run V6.sh
if you run it via adb shell (i.e. without script manager): don't worry !
V6 allows you to turn off it's animation, which doesn't work well in adb shell.
i got everything correct except the oom grouping are Not in effect!that means the boot script did not run....
and
Current minfrees = 6,8,24,32,48,60 mb
Prior V6 minfrees= 6,8,24,32,48,60 mb
supercharger level = 75%
v6
chenilen said:
2. Busybox Installer
Pick the 1.18.2 since it is the version where the author recommends.
Click to expand...
Click to collapse
not exactly. v1.16 is recommended, which - however - does not work.
v1.18.2 is a good choice, contrary to the V6.sh's own source code.
---------- Post added at 10:18 AM ---------- Previous post was at 10:13 AM ----------
Code:
\\\\\\\\ T H E V 6 S U P E R C H A R G E R ////
============================================
\\\\\\\\ Driver's Console ////
==============================
1. SuperCharger & Launcher Status for Update 9 }
}
==================== 256 HP ====================
2. UnLedded (Multitasking) {6,8,22,24,26,28 MB}
3. Ledded (Balanced) {6,8,26,28,30,32 MB} our SGY has 290 MB RAM
4. Super UL (Aggressive) {6,8,28,30,35,50 MB}
}
==================== 512 HP ====================
5. UnLedded (Multitasking){6,12,40,50,60, 75 MB}
6. Ledded (Balanced){6,12,55,70,85,100 MB}
7. Super UL (Aggressive){6,12,75,90,95,125 MB}
}
=================== 768+ HP ====================
8. Super 768HP(Aggressive){8,16,150,165,180,200}
9. Super 1000HP(Agressive){8,16,200,220,240,275}
}
11. OOM Grouping Fixes + Hard To Kill Launcher }
12. OOM Grouping Fixes + Die-Hard Launcher }
13. OOM Grouping Fixes + BulletProof Launcher }
14. UnKernelizer {UnDo Kernel/VM Tweaks}
15. UnSuperCharger {Revert Memory Settings}
16. The bOOM STICK {Verify OOM Groupings}
17. BulletProof Apps {Hit or Miss}
18. Engine Flush {ReCoupe RAM & Kill Lag}
19. Detailing {Vacuum & Reindex SQL DBs}
20. Nitro Lag Nullifier {Experimental}
21. System Installer {Terminal Usage}
22. Re-SuperCharger {Restore V6 Settings}
23. PowerShifting {Switch Presets FAST!}
24. Driving's Cool {Open !SuperCharger.html}
25. Help Centre {Open XDA SC Thread}
26. Driver Options }
27. Howabout Some Sugar? {Gotta Buck?}
28. SuperCharge You {Really!}
29. ReStart Your Engine {Reboot Instantly}
30. SuperClean & ReStart {Wipe Dalvik & Reboot}
31. Exit }
---------- Post added at 10:21 AM ---------- Previous post was at 10:18 AM ----------
rohit589769 said:
i got everything
Click to expand...
Click to collapse
wtf did you quote the whole posting for ? delete the quote pls !
---------- Post added at 10:39 AM ---------- Previous post was at 10:21 AM ----------
A PowerShift Script was saved to
/mnt/sdcard/V6_SuperCharger/PowerShift_Scripts
while the script states it is /data/V6[...]
V6 and sed complain about file system being read-only. that is too bad.
Or, you can just use any busybox above 1.19.0
Confirmed to work by me and the dev himself.
mai77 said:
not only in your case. here too, swype or 3rd party keyboards needed to be used to use "script manager" and other command shell consoles.
there is some issue with the input method in the SGY, standard SGY keyboard does not work with those - no keypresses will have any effect with those.
Is the standard or Samsung Keypad does'nt work with the said V69RC5? Well, I'm running a V69beta3.1, at first I thought there's something wrong w/ Samsung Keypad on that version. As I am gonna hit an option, I can not enter it coz ENTER button on Samsung Keypad did'nt work. Then I accidentaly hit the volume- key and it works! Try the volume- key for entering an option. Hope it will work also for you guys.
Click to expand...
Click to collapse
Still cannot get about 90MB of Ram
Allways about 150 MB
oom grouping are not working
supercharger level = 50%
The really challenge for me
But finally 100% super char
thanks
Mine doesnt run at boot. --"
Sent from my GT-S5360
1. Open Script manager and go to /mnt/sdcard/V6_SuperCharger
2. Choose 99SuperCharger.sh and choose "run as root" and "run at boot"
3. Press "Run"
It may also be a problem related to your ROM and the way SuperCharger is run at boot.
"Press then click the SU image, if its green, you're good to go. Press RUN"
sorry i don't know this step.explain me
angel_boulevard said:
"Press then click the SU image, if its green, you're good to go. Press RUN"
sorry i don't know this step.explain me
Click to expand...
Click to collapse
he talks about "script manager". just familiarize yourself with script manager. with above action, you activate "run as root" for the V6 script.
MarcoToo said:
1. Open Script manager and go to /mnt/sdcard/V6_SuperCharger
2. Choose 99SuperCharger.sh and choose "run as root" and "run at boot"
3. Press "Run"
It may also be a problem related to your ROM and the way SuperCharger is run at boot.
Click to expand...
Click to collapse
Yea. All the scripts of mine doesnt run at boot. ,zzzz
Sent from my GT-S5360
does it work on rooted stock rom
why doesnt it run at boot with creeds rom? =="
drnarinder said:
does it work on rooted stock rom
Click to expand...
Click to collapse
Try it and tell us if it does.
--------------
MarcoToo said:
Try it and tell us if it does.
Click to expand...
Click to collapse
Yes. It will
Sent from my GT-S5360 using XDA App
mine always show that my launcher priority level is 6 so i can't do the command number [10] . i tried change the launcher but, the result is the same . help -_-
i'm using creed's room v2.1
Introducing Trickster MOD, bringing Trickster experience to virtually every ROM out there.
Users using Trickster ROM 1.2.1 or newer can use this MOD to update
This CWM zip include the binaries and scripts I used for optimization in Trickster ROM. What it can do/set:
- Zipalign and sqlite DB optimization at boot
- Some android properties tweaks with mobile network speed tweak
- Screen state optimization for kernel task scheduler and virtual memory management (ch33kybutt)
- Set I/O scheduler, read ahead buffer, CPU scaling governor, min and max CPU speed
Following features are dependent on kernel features:
- Color (applied by default), contrast and gamma tweaks
- Generic hotplug
- CPU Temp limit
- Minimal SmartReflex voltage of Core, IVA, and MPU domains
- Nominal SmartReflex voltage for Core, IVA, and MPU domains
- Regulator voltages
- GLaDOS live OC of Core, GPU and MPU
- WIFI mode for screen off (power saving or full speed)
- Vibrator strength
- Headset volume boost
- High performance sound
- Force fast charge
- Battery live extender
- Touch wake and touch wake duration
- fsync control
Download
Trickster MOD 20120709
Control App
Changelogs
Requirements:
- CWM
- Someone who understands instructions below
Installation/Update instructions:
- Reboot to CWM recovery
- Do a nandroid if you're scared (recommended in case you have problem)
- Install zip from sdcard
- Reboot the phone
- If you see /sdcard/trickster directory with configuration files inside then this mod installed successfully
Usage:
By default Trickster color, some android property regarding UI smoothness and mobile data speed tweaks and screen state optimization are applied. If you want to change additional settings then either use the app or :
- Go to /sdcard/trickster directory, you'll see at most four following configuration files, depending on kernel features:
. color.conf: color related tweak
. general.conf: generic tweaks like zipalign, sqlite, and screenstate optimization
. kern_general.conf: generic kernel tweaks like CPU speed, governor, IO scheduler and readahead buffer
. kern_specific.conf: specific kernel features like sound control, WIFI power, fast charge... - Edit any above file to change the settings you want using app like ES Explorer, Root Explorer..., instructions included inside
- Settings are automatically applied when user saves any of these files
- Some changes require restarting your phone
- To check log to see if it works use "logcat|grep Trickster" from adb/terminal
Reinstall boot service, Reset settings, Removal instructions:
- If you install a new kernel that includes ramdisk (boot.img format like franco or leanKernel), you can either reinstall Trickster MOD, run "tricks install" from adb root shell or terminal, or apply this CWM zip from recovery.
- You can delete a configuration file, files, or entire /sdcard/trickster directory to reset to default settings for a file, files or all configuration respectively
- If you mess up and can't boot, say aggressive OC/UV , use this CWM zip to reset
- If you want to uninstall, use this CWM zip
Credits:
- Google
- Our great kernel devs
- chainfire for SuperSU and su
- stericson for busybox
- ch33kybutt's for his brilliant idea on screen state optimizations
- Beta testers for your dedication in testing this
- nexus.prime for his unintallation script
- phone_user for init.d CWM zip
- Anyone I learnt from
Disclaimer: This is provided with NO GUARANTY whatsoever. Use your common sense.
Beta test: If you want to test my stuffs, including other things beside this. Contact me through PM.
Flash failed in twrp...getting an error message that it can't open the zip.
Edit--
I fail at reading directions... :/
Sent from my Galaxy Nexus using Tapatalk 2
So what really happened? I haven't tried it with TWRP, but I want to know if it does work with this recovery?
bigeyes0x0 said:
So what really happened? I haven't tried it with TWRP, but I want to know if it does work with this recovery?
Click to expand...
Click to collapse
Worked w twrp on eclipse.
Sent from my Galaxy Nexus using Tapatalk 2
Thanks for your contribution .
Seems to be giving me more battery
Sent from my Galaxy Nexus using xda premium
Gonna give it a go... Gummy 1.2.2 .
V6 super?
Shall I un-super?
vzw GNex
tacosrdelicioso said:
Seems to be giving me more battery
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yes and also smoother .
Juiced718 said:
Gonna give it a go... Gummy 1.2.2 .
V6 super?
Shall I un-super?
vzw GNex
Click to expand...
Click to collapse
You should but keep supercharged services.jar|odex if you did that.
Just curious, if you have this installed and install either a new ROM or kernel over the top of this does it need to be reinstalled?
bigeyes0x0 said:
So what really happened? I haven't tried it with TWRP, but I want to know if it does work with this recovery?
Click to expand...
Click to collapse
Yeah, sorry...had a faulty download the first time around. worked fine in twrp after a clean download.
Sent from my Galaxy Nexus using Tapatalk 2
skusa93 said:
Just curious, if you have this installed and install either a new ROM or kernel over the top of this does it need to be reinstalled?
Click to expand...
Click to collapse
a new ROM - definitely
a new kernel - sometimes as some might clean up init.d directory.
When running tricks through term... I'm not quite sure that the changes have taken effect, is there an easy way to verify?
I'm no dev so be nice....
vzw GNex
Trying this with Franco r163 with app removed, running eclipse, will report back.
Sent from my Galaxy Nexus using XDA
Juiced718 said:
When running tricks through term... I'm not quite sure that the changes have taken effect, is there an easy way to verify?
I'm no dev so be nice....
vzw GNex
Click to expand...
Click to collapse
Log is written to logcat, use any logcat reader app or use logcat|grep Trickster from terminal or adb.
smittycg said:
Trying this with Franco r163 with app removed, running eclipse, will report back.
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
What's the difference with app removed
Sent from my Galaxy Nexus using xda premium
Obviously because settings from franco app might interfere with this in some cases.
How do you run this app
Sent from my Galaxy Nexus using Tapatalk 2
reggiec74 said:
How do you run this app
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
good job buddy!
on another note..can this be flashed over a MIUI Rom?
SoCalSpecialist said:
good job buddy!
on another note..can this be flashed over a MIUI Rom?
Click to expand...
Click to collapse
The op says anything with root and init.d
Sent from my Galaxy Nexus using xda premium
SoCalSpecialist said:
good job buddy!
on another note..can this be flashed over a MIUI Rom?
Click to expand...
Click to collapse
Common sense by reading requirements say it should.
This will enable the loading of scripts in /system/etc/init.d without editing the boot.img.
This will work for ALL dual core S3 variants.
There are two versions, one with my ondemand profile and one without. The one that has CPUProfile has it, this is a script that runs at boot setting the ondemand options to favor battery without sacrificing performance. Most user saw a GREAT increase in battery life especially when idle. See the link in my sig to use the full cpu editor. (works on the S3 with this mod)
To add init.d manually to your own rom just open /system/etc/init.qcom.post_boot.sh and add this line to the end of the file:
Code:
/system/etc/init.d/*
This mod also installs busybox which enables alot of tools native to busybox see here for busybox usage.
To install flash in recovery.
Download:
Add init.d ONLY:
EZ_Init.d ONLY
Add init.d and CPUProfile Script:
EZ_Init.d AND CPUProfile
So does this tweak the onDemand governor? Is it safe to use with setCPU? Is it safe with the Sammy kernel?
Nevermind...found the Sammy kernel thread under "original development"
good work man nice another great addition to the gs3
Works as advertised, thanks for this!
Sent from my SPH-L710 using Tapatalk 2
thanx but
Not sure why do you need to mount /system as writable in init.d script. Does that mean regular init.d scripts won't work?
bravomail said:
Not sure why do you need to mount /system as writable in init.d script. Does that mean regular init.d scripts won't work?
Click to expand...
Click to collapse
I do in all my scripts guess Its habit lol. But Its not necessary for most scripts
Sent from my SAMSUNG-SGH-I747 using xda premium
smokin1337 said:
I do in all my scripts guess Its habit lol. But Its not necessary for most scripts
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Then pls fix it if it is not too much trouble. I know publishing is kinda pain.
Mounting system as writable is a no-no.
bravomail said:
Then pls fix it if it is not too much trouble. I know publishing is kinda pain.
Mounting system as writable is a no-no.
Click to expand...
Click to collapse
I'm not trying to be a wise ass here but why is mounting system as writable a bad thing? Every device I've had never gave me a problem when I did it actually makes a few things easier when your in a pinch.
Is it because of Odin?
Sent from my HTC VLE_U using xda premium
Can we see some proof or evidence from users that this does indeed give significantly better battery usage when idling without impacting performance?
smokin1337 said:
This will enable the loading of scripts in /system/etc/init.d without editing the boot.img.
This will work for ALL dual core S3 variants.
There are two versions, one with my ondemand profile and one without. The one that has CPUProfile has it, this is a script that runs at boot setting the ondemand options to favor battery without sacrificing performance. Most user saw a GREAT increase in battery life especially when idle. See the link in my sig to use the full cpu editor. (works on the S3 with this mod)
To add init.d manually to your own rom just open /system/etc/init.qcom.post_boot.sh and add this line to the end of the file:
Code:
/system/etc/init.d/*
This mod also installs busybox which enables alot of tools native to busybox see here for busybox usage.
To install flash in recovery.
Download:
Add init.d ONLY:
EZ_Init.d ONLY
Add init.d and CPUProfile Script:
EZ_Init.d AND CPUProfile
Click to expand...
Click to collapse
Do you flash this in stock recovery or cwm?
Worked at flash... Does this conflict with the CPU disabler script?
Sent from my SPH-L710 using xda premium
---------- Post added at 12:15 PM ---------- Previous post was at 12:08 PM ----------
bgs_piece said:
Do you flash this in stock recovery or cwm?
Click to expand...
Click to collapse
CWM for me...I also added the ramscript to the folder http://forum.xda-developers.com/showthread.php?t=1111145...along with the CPU disabler script too...
---------- Post added at 12:27 PM ---------- Previous post was at 12:15 PM ----------
smokin1337 said:
This will enable the loading of scripts in /system/etc/init.d without editing the boot.img.
This will work for ALL dual core S3 variants.
There are two versions, one with my ondemand profile and one without. The one that has CPUProfile has it, this is a script that runs at boot setting the ondemand options to favor battery without sacrificing performance. Most user saw a GREAT increase in battery life especially when idle. See the link in my sig to use the full cpu editor. (works on the S3 with this mod)
To add init.d manually to your own rom just open /system/etc/init.qcom.post_boot.sh and add this line to the end of the file:
Code:
/system/etc/init.d/*
This mod also installs busybox which enables alot of tools native to busybox see here for busybox usage.
To install flash in recovery.
Download:
Add init.d ONLY:
EZ_Init.d ONLY
Add init.d and CPUProfile Script:
EZ_Init.d AND CPUProfile
Click to expand...
Click to collapse
smokin OP and Dev of this mod.
I copied the CPU Sleeper script (Eugene373) http://forum.xda-developers.com/showthread.php?t=1745517 and the Ram Manager script (Juwe11) http://forum.xda-developers.com/showthread.php?t=1745517 into the flashable you made...can I share it if I give you props?:fingers-crossed:
I flashed this in CWM and found the init.d folder with scripts installed.
When I opened the 99test script, I noted that a test file with "done" should have been created in data/local/tmp. I could not find this file anywhere.
Am I looking in the wrong place or am I correct in assuming that init.d functionality is not working?
Pj
Phoenix, AZ
This may be a noob question, but I didn't see it in the OP. How do I uninstall this??
the links are dead is there another place i can download this file
Bump
Sent from my SGH-I747 using Tapatalk 2
mvaughn12 said:
the links are dead is there another place i can download this file
Click to expand...
Click to collapse
+1
Sent from my SGH-T999 using xda app-developers app
jjlean said:
+1
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Here is a working link
http://sourceforge.net/projects/xquizit/files/T999/Apps/init.d Support.zip/download
Sent from my SGH-T999 using Tapatalk 2
Wildchld said:
Here is a working link
http://sourceforge.net/projects/xquizit/files/T999/Apps/init.d Support.zip/download
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Install fails?????
bradld said:
Install fails?????
Click to expand...
Click to collapse
No he fixed it. Installs fine. You can Odex after running it.
Sent from my SGH-T999 using xda app-developers app
is this still working on stock JB?
cuz I can't get my scripts to work.
Ok. Forget about the Near Project Butter for ICS that i´ve ported to our device.
The tweaks contained there that are added to the build.prop, may cause misbehaviour on your SGW. But because some people ignored my warnings, I decided to remove the ported MOD. Beside this the tweaks added to the build.prop are not needed as I couldn´t see any benefit in using them.
So you only need to disable CPU Rendering to get it faster and smoother.
Therefore I made a MOD that just disables CPU Rendering.
>>>Disable CPU Rendering.<<< This one works with all ICS/CM9 and GB ROMs
Dropbox Mirror
You can also enable 16-bit-Transparency in your CM9 settings to make it even more faster.
Flash it as a zip file via CWM Recovery.
The Disable CPU Rendering MOD will create a backup of your egl.cfg file and your libGLES_android.so file.
To revert back you simply have to delete egl.cfg and rename egl.cfg.bak into egl.cfg. The same with libGLES_android.so.bak. Reboot and you are done. Or simply restore your Backup you made hopefully before flashing it.
[Edit:] I´ve updated the Disable CPU Rendering file. Now it works in GB as well. There was an unmont command to much in the script i´ve used, so the egl.cfg file was not updated in GB. Now it works and will also create backup files of the modified files.
[Note:] Do not expect higher scores in your benchmarks by applying this mod. This mod just disables CPU rendering completely so the UI will be rendered by the GPU and so running smoother.
downloaded, making a backup. will install.
(i thought rapidshare was long gone. )
thanks.
flashed, performance is ok. (i haven't seen any difference.)
does it takes more battery?
verbraucht die gpu mehr batterie als die cpu beim UI rendering?
so if i want it i just flash the first, if i don't want it more i have only to flash te second one?
Topic quote:
"And in case you want to revert back, simply restore your Backup you made hopefully before flashing it."
if you didn't made the backup, you should best reflash your ROM
Fensterbank said:
does it takes more battery?
verbraucht die gpu mehr batterie als die cpu beim UI rendering?
Click to expand...
Click to collapse
No. At least not if you just disable CPU rendering. Not sure how about the additional tweaks in build.prop because I didn´t test them for a long time, but without them there is no difference in consumption.
I´m also not using these tweaks in build.prob because I couldn´t see a difference with and without them. So just having CPU rendering disabled and 16-bit-Transparency enabled.
Just ported the whole MOD but personally disabling CPU rendering and enabling 16 bit transparency is enough for me. This will already make CM9 smoother, even without adding the additional tweaks into build.prop.
vittorio92vittorio said:
so if i want it i just flash the first, if i don't want it more i have only to flash te second one?
Click to expand...
Click to collapse
I thought it´s clear the one called Buttersmooth is with the tweaks in build.prob and the other one is without them. Both do disable CPU rendering.
S440 said:
Topic quote:
"And in case you want to revert back, simply restore your Backup you made hopefully before flashing it."
if you didn't made the backup, you should best reflash your ROM
Click to expand...
Click to collapse
or, u cud also go to cwm recovery, backup and restore, advance restore, restore system, then reboot..
-salute!
Anyone tried it already? How is it? Looking for more feedback coz im really itching to try this mod. :beer:
Sent from my GT-I8150 using xda premium
eluspo said:
Anyone tried it already? How is it? Looking for more feedback coz im really itching to try this mod. :beer:
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Im using this for almost 2 weeks now.. smooth and stable..
Actually you can do this manually.. you can also restore manually..
Give thanks to op for making flashable file..
Sent from my GT-I8150
Dude are u pinoy? How manually?
Sent from my GT-I8150 using xda premium
---------- Post added at 04:53 AM ---------- Previous post was at 04:51 AM ----------
Can this be applied on beta2?
Sent from my GT-I8150 using xda premium
---------- Post added at 05:01 AM ---------- Previous post was at 04:53 AM ----------
@utingbato taga makati ka pala, nasa evangelista lang ako lol.
Sent from my GT-I8150 using xda premium
eluspo said:
Dude are u pinoy? How manually?
Sent from my GT-I8150 using xda premium
---------- Post added at 04:53 AM ---------- Previous post was at 04:51 AM ----------
Can this be applied on beta2?
Sent from my GT-I8150 using xda premium
---------- Post added at 05:01 AM ---------- Previous post was at 04:53 AM ----------
@utingbato taga makati ka pala, nasa evangelista lang ako lol.
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
uu pre pinoy ako hehehe :good:
1. go to folder system / lib / egl
2. edit egl.cfg file
3. delete "0 0 android" Line
4. then rename libGLES_android.so >>> libGLES_android.so.bak (dont delete so you can restore it if you want)
5. copy adreno_config to system / etc
6. reboot :good:
Tnx bro pero na flash ko na eh haha.
So far mabilis nga sya hehe. Open agad apps ko.
Sent from my GT-I8150 using xda premium
utingbato said:
1. go to folder system / lib / egl
2. edit egl.cfg file
3. delete "0 0 android" Line
4. then rename libGLES_android.so >>> libGLES_android.so.bak (dont delete so you can restore it if you want)
5. copy adreno_config to system / etc
6. reboot :good:
Click to expand...
Click to collapse
This is exactly what the Disable CPU Rendering MOD will do. Exept adreno_config.txt is not added because it´s not needed. So you can do it manually, but flashing it is more comfortable.
The Buttersmooth MOD will also add the adreno_config file as well as some tweaks into the build.prop file, but like said previously you don´t need them either, so it´s enough to flash just the Disable CPU Rendering MOD.
You can apply this mod to any CM9 based ROM for the SGW.
I was told it even works with GB based ROMs.
So it´s rather an easy MOD and quite easy to undo unlike all the other engine MODs and scripts.
honeyx said:
This is exactly what the Disable CPU Rendering MOD will do. Exept adreno_config.txt is not added because it´s not needed. So you can do it manually, but flashing it is more comfortable.
The Buttersmooth MOD will also add the adreno_config file as well as some tweaks into the build.prop file, but like said previously you don´t need them either, so it´s enough to flash just the Disable CPU Rendering MOD.
You can apply this mod to any CM9 based ROM for the SGW.
I was told it even works with GB based ROMs.
So it´s rather an easy MOD and quite easy to undo unlike all the other engine MODs and scripts.
Click to expand...
Click to collapse
Yes i agree.. its more comfortable to flash it..
Sent from my GT-I8150
can someone confirm that it works with gingerbread?
---------- Post added at 01:40 PM ---------- Previous post was at 01:16 PM ----------
utingbato said:
uu pre pinoy ako hehehe :good:
1. go to folder system / lib / egl
2. edit egl.cfg file
3. delete "0 0 android" Line
4. then rename libGLES_android.so >>> libGLES_android.so.bak (dont delete so you can restore it if you want)
5. copy adreno_config to system / etc
6. reboot :good:
Click to expand...
Click to collapse
ok instead of "0 0 android" I should write there "libGLES_android.so" and then save it as "libGLES_android.so.bak", right?
because in gingerbread there is also the egl.cfg.
edit:
nevermind I had a brainlag, now I understand ...
tried on mutant rom only with Disable CPU Rendering,the result is better than update newer driver. but if i flash buttersmooth for cm9(but i still using gb),the performance drop like hell.
Sent from my GT-I8150 using xda app-developers app
You shouldn´t flash the Buttersmooth for CM9 in GB. The tweaks there are only for ICS/CM9 and will cause a drop in performance. So only use Disable CPU Rendering.
But you can edit build.prop and remove the tweaks added there.
honeyx said:
You shouldn´t flash the Buttersmooth for CM9 in GB. The tweaks there are only for ICS/CM9 and will cause a drop in performance. So only use Disable CPU Rendering.
But you can edit build.prop and remove the tweaks added there.
Click to expand...
Click to collapse
haha....i know it is for cm9. just try to test the result and let others know what is the cost. just being naughty. i have do my nand backup before flash,thanks for caring.
Sent from my GT-I8150 using xda app-developers app
when I delete the line "0 0 android" and then save it, it wont save. when I open the file then, there is again "0 0 android". and when I rename libGLES.so.bak its again libGLES.so after.
so it doesnt work with gingerbread? I already restarted, but there is no difference.
Fensterbank said:
when I delete the line "0 0 android" and then save it, it wont save. when I open the file then, there is again "0 0 android". and when I rename libGLES.so.bak its again libGLES.so after.
so it doesnt work with gingerbread? I already restarted, but there is no difference.
Click to expand...
Click to collapse
You need to mount the directory as Read/Write as its mounted as ReadOnly, but why are you doing it manually if you simply can flash the file and all will be done for you?
7amada ROM V5!! For The Galaxy Wonder GT-I8150
Features
Based on XXLM8 with COW OC+ KERNEL
Rooted
Busybox'd
Deodexed
Zipaligned
Task killer tweak
nano + sysro/sysrw
bash
Added Seeders V6
/etc/init.d scripts support
Replaced apps:
- My Files -> ES File Manager
- Google Talk -> Google Talk with audio/video
Added apps:
- Android Terminal
RTL Arabic support
Modded Mms.apk: convert to mms at 500sms, insert 500 contacts list, sent time, no sms/mms in call log
Modded Phone.apk: no increasing ringtone
Modded Camera.apk: new media profiles,disabled low battery alert(Camcorder too)
Modded Browser.apk: 5 user agents, font size, 16 tabs
Customizable 14 statusbar toggle button
Battery bar on statusbar
Cow OC+ Kernel, WiFi fixed!
EDT Tweaks
Extended Power menu
Long press volume buttons to skip song
Swype to remove notifications
Disabled all full/low battery notification
CRT-off effect
1% battery
Fly-In and Flip Transitions (MIX)
Sony Bravia Engine
Enabled native sip stack with wifi/3g
build.prop tweaks
Ultimate Ads (thanks to PMR)
AGPS patch
APN worldwide
Google's DNS servers
Only TW launcher included!!
Changed Some StatusBar Colours and The background is now Transparent!
Touch improvement
AC!D Audio V4/5/6 Ultimate Sound Tweak New
Smooth spinners
Smooth scroll mod
V6 SuperCharger (by zeppelinrox: thread)
- To apply it: Open Terminal Emulator - type: su (enter) - type: sh V6_SuperCharger.sh (enter) - choose option 2
Download Links
7amada Rom V5!!
Swap Add-on
View attachment 1713125 Sorry for missing that. this will theme the notification toggles
View attachment Stock_Theme.zip This will make theme your statusbar back to Stock, but with 14 toggles
How to install
The Normal Way!!
Backup your apps by using Titanium Backup or similar (for call logs and you can use Call Logs Backup and Restore, and for SMS history u can use SMS Bagkup and Restore)
ONLY use ClockworkMod V5/6 recovery to flash this
Do a full backup of your current ROM
Go to mounts and storage
Format /System /Data /Cache (you can skip /data because you are going to do it again next step)
Go back and Wipe Data/factory reset
Go to Advanced
Wipe Dalvik Cache
Go back and Install the Rom
Fix Permissions(In Advanced)
Reboot And Enjoy!!
The Pristine Way!! (better)
Go to This Website
Give thanks to Pep for it!!
Warning: Do not restore system apps' data!
changelog:
12/1/2013
Go Here i am too lazy to copy
5/1/2013
Now Using OC Cow Kernel And It Is Stable!!
Updated Seeders. To check if it is working just go to terminal and type
Code:
su
seeder
Replaced Holo Launcher With TW Launcher
Removed Go Launcher And ES File Manager From System Files and Added them data folder so you can remove them just like uninstalling any app
1/1/2013
More tweaks added from here
added Wi-Fi tether app(not tested and easily removed)
Go to Post #15 For more information
30/12/2012
transparent statusbar and dr.droid notification bottom
added seeders v5
Swapped Sdcards
added fly-in and flip transition animations (mix)
zipaligned from kitchen
bugs:
Non so far
anything else people report
ScreenShots in the Attachments
ADD-ONS
Disable CPU Rendering:View attachment Disable-CPU-Rendering.zip Main Thread Is Here (Makes your phone Faster!!)
For Installation just flash using CWM and reboot. NO WIPE NEEDED
credits
Bagux for his great work that i only just modded
Hadidjapri for helping me with the kernel(W.I.P)
cycloneblast for his amazing tweak package
CowWithGun For CowOC+ kernel
Skrillex For his Support
zeppelinrox for Supercharge V6!!
Ibanez7 for the theme
You for not doing anything at all XD
Anyone that helped me but i forgot
thanks.
will give it a try after new year.
Ekril said:
thanks.
will give it a try after new year.
Click to expand...
Click to collapse
Great, don't forget to give me feedback and if you have any suggestions our add-ons to the Rom feel free to post them or PM me.
Sent from my GT-I8150
Oh SH#T forgot to say I swapped the sdcards!! I need to change my brain. Sorry guys and I will post a non-swapped version right now.
Sent from my GT-I8150
7amada100 said:
Great, don't forget to give me feedback and if you have any suggestions our add-ons to the Rom feel free to post them or PM me.
Sent from my GT-I8150
Click to expand...
Click to collapse
I have a monthly quota for my internet access that is why i am waiting for the 1st of January.:/
i will give a detailed report after installing.
have a happy year.
Thank you very much. Innovation for a long time waiting for this project. your efforts such will be even more beautiful. Stock rom is the best bagux project.
Nice job .
Do u see that go lancher and holo are smoother that the touchwiz launcher ? I personally prefer TW.
Sent from my GT-I8150 using xda premium
UltimHero said:
Nice job .
Do u see that go lancher and holo are smoother that the touchwiz launcher ? I personally prefer TW.
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
So which one should I replace?
Thanks for the idea btw. Next update will have TW, but I have to remove one three launcher are heavy for the phone
Sent from my GT-I8150
7amada100 said:
So which one should I replace?
Thanks for the idea btw. Next update will have TW, but I have to remove one three launcher are heavy for the phone
Sent from my GT-I8150
Click to expand...
Click to collapse
Go launcher is definitely the more customizable but its a bit heavy as well ! What do u think of its performance ?
Sent from my GT-I8150 using xda premium
UltimHero said:
Go launcher is definitely the more customizable but its a bit heavy as well ! What do u think of its performance ?
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
I like go launcher more too, the performance is the same I guess hop launcher saves data on sdcard so it doesn't get killed easily and loads faster if it is killed
Sent from my GT-I8150
I don't know if it just me or anyone else have the same problem, i can't install this ROM, i flash it, but after reboot from recovery always stuck on blank screen (right after samsung logo).i came from cm9 rc2 by arco, using castagnalIT kernel.
cifoel said:
I don't know if it just me or anyone else have the same problem, i can't install this ROM, i flash it, but after reboot from recovery always stuck on blank screen (right after samsung logo).i came from cm9 rc2 by arco, using castagnalIT kernel.
Click to expand...
Click to collapse
Yes, another guy also reported this. Try going pristine mode. The other guy says it also happens when he installs the original Rom. Try the pristine way then give me feedback
--EDIT--
The other guy tried pristine and he still go the same problem. I will build a new versions right now.
Sent from my GT-I8150
Finished making version 2.1 this post is sent from it added the full wonder tweaks from general section(can't give you a link right now because it is harder from phone) added a wifi tether app(found it in kitchen) i didn't test it as i have no data plan and it is not added as a system app so it can be easily removed . For anyone who thinks that the animations are too much there is a toggle in "settings==>display" to change how many animations you want to show. I will change the normal flashing mode to add more details sometimes first boot takes longer than normal ones so wait before reporting(max is a min)
Long post eh? Didn't have time to change it into point form
I have some network problems right now(my internet is super sloow right now) i will post when it becomes better
--EDIT--
All files are uploaded
Sent from my GT-I8150
in previous versions, I really like this rom, it's perfect. but there is one problem that is with battery life. what might be my battery that is damaged. whether this version is better battery life?
arybagusoctora said:
in previous versions, I really like this rom, it's perfect. but there is one problem that is with battery life. what might be my battery that is damaged. whether this version is better battery life?
Click to expand...
Click to collapse
I have added performance tweaks and they might be the problem, try lower CPU speed and/or a battery saviour App.
Maybe next release would have a recommended battery app, I need suggestions cuz I don't use them
Sent from my GT-I8150 using xda app-developers app
It definitely is my daily-driver now...but i replaced some files to make it more perfect...
Plus include voice recorder,sim toolkit...they are missing
Thanks for the ROM!
Sent from my GT-I8150 using xda premium
Shehram Ahmad said:
It definitely is my daily-driver now...but i replaced some files to make it more perfect...
Plus include voice recorder,sim toolkit...they are missing
Thanks for the ROM!
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
I didn't remove any apps from the original release, I actually added some. You can PM those apps you added and I will include them in the next release
Sent from my GT-I8150
7amada100 said:
Features
.
.
.
V6 SuperCharger (by zeppelinrox: thread)
- To apply it: Open Terminal Emulator - type: su (enter) - type: sh V6_SuperCharger.sh (enter) - choose option 2
Click to expand...
Click to collapse
if not applying V6 is v6 supercharger scripts automatically run at boot?? because some people say that all script in init.d will run automatically at boot..