Ok. Forget about the Near Project Butter for ICS that i´ve ported to our device.
The tweaks contained there that are added to the build.prop, may cause misbehaviour on your SGW. But because some people ignored my warnings, I decided to remove the ported MOD. Beside this the tweaks added to the build.prop are not needed as I couldn´t see any benefit in using them.
So you only need to disable CPU Rendering to get it faster and smoother.
Therefore I made a MOD that just disables CPU Rendering.
>>>Disable CPU Rendering.<<< This one works with all ICS/CM9 and GB ROMs
Dropbox Mirror
You can also enable 16-bit-Transparency in your CM9 settings to make it even more faster.
Flash it as a zip file via CWM Recovery.
The Disable CPU Rendering MOD will create a backup of your egl.cfg file and your libGLES_android.so file.
To revert back you simply have to delete egl.cfg and rename egl.cfg.bak into egl.cfg. The same with libGLES_android.so.bak. Reboot and you are done. Or simply restore your Backup you made hopefully before flashing it.
[Edit:] I´ve updated the Disable CPU Rendering file. Now it works in GB as well. There was an unmont command to much in the script i´ve used, so the egl.cfg file was not updated in GB. Now it works and will also create backup files of the modified files.
[Note:] Do not expect higher scores in your benchmarks by applying this mod. This mod just disables CPU rendering completely so the UI will be rendered by the GPU and so running smoother.
downloaded, making a backup. will install.
(i thought rapidshare was long gone. )
thanks.
flashed, performance is ok. (i haven't seen any difference.)
does it takes more battery?
verbraucht die gpu mehr batterie als die cpu beim UI rendering?
so if i want it i just flash the first, if i don't want it more i have only to flash te second one?
Topic quote:
"And in case you want to revert back, simply restore your Backup you made hopefully before flashing it."
if you didn't made the backup, you should best reflash your ROM
Fensterbank said:
does it takes more battery?
verbraucht die gpu mehr batterie als die cpu beim UI rendering?
Click to expand...
Click to collapse
No. At least not if you just disable CPU rendering. Not sure how about the additional tweaks in build.prop because I didn´t test them for a long time, but without them there is no difference in consumption.
I´m also not using these tweaks in build.prob because I couldn´t see a difference with and without them. So just having CPU rendering disabled and 16-bit-Transparency enabled.
Just ported the whole MOD but personally disabling CPU rendering and enabling 16 bit transparency is enough for me. This will already make CM9 smoother, even without adding the additional tweaks into build.prop.
vittorio92vittorio said:
so if i want it i just flash the first, if i don't want it more i have only to flash te second one?
Click to expand...
Click to collapse
I thought it´s clear the one called Buttersmooth is with the tweaks in build.prob and the other one is without them. Both do disable CPU rendering.
S440 said:
Topic quote:
"And in case you want to revert back, simply restore your Backup you made hopefully before flashing it."
if you didn't made the backup, you should best reflash your ROM
Click to expand...
Click to collapse
or, u cud also go to cwm recovery, backup and restore, advance restore, restore system, then reboot..
-salute!
Anyone tried it already? How is it? Looking for more feedback coz im really itching to try this mod. :beer:
Sent from my GT-I8150 using xda premium
eluspo said:
Anyone tried it already? How is it? Looking for more feedback coz im really itching to try this mod. :beer:
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Im using this for almost 2 weeks now.. smooth and stable..
Actually you can do this manually.. you can also restore manually..
Give thanks to op for making flashable file..
Sent from my GT-I8150
Dude are u pinoy? How manually?
Sent from my GT-I8150 using xda premium
---------- Post added at 04:53 AM ---------- Previous post was at 04:51 AM ----------
Can this be applied on beta2?
Sent from my GT-I8150 using xda premium
---------- Post added at 05:01 AM ---------- Previous post was at 04:53 AM ----------
@utingbato taga makati ka pala, nasa evangelista lang ako lol.
Sent from my GT-I8150 using xda premium
eluspo said:
Dude are u pinoy? How manually?
Sent from my GT-I8150 using xda premium
---------- Post added at 04:53 AM ---------- Previous post was at 04:51 AM ----------
Can this be applied on beta2?
Sent from my GT-I8150 using xda premium
---------- Post added at 05:01 AM ---------- Previous post was at 04:53 AM ----------
@utingbato taga makati ka pala, nasa evangelista lang ako lol.
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
uu pre pinoy ako hehehe :good:
1. go to folder system / lib / egl
2. edit egl.cfg file
3. delete "0 0 android" Line
4. then rename libGLES_android.so >>> libGLES_android.so.bak (dont delete so you can restore it if you want)
5. copy adreno_config to system / etc
6. reboot :good:
Tnx bro pero na flash ko na eh haha.
So far mabilis nga sya hehe. Open agad apps ko.
Sent from my GT-I8150 using xda premium
utingbato said:
1. go to folder system / lib / egl
2. edit egl.cfg file
3. delete "0 0 android" Line
4. then rename libGLES_android.so >>> libGLES_android.so.bak (dont delete so you can restore it if you want)
5. copy adreno_config to system / etc
6. reboot :good:
Click to expand...
Click to collapse
This is exactly what the Disable CPU Rendering MOD will do. Exept adreno_config.txt is not added because it´s not needed. So you can do it manually, but flashing it is more comfortable.
The Buttersmooth MOD will also add the adreno_config file as well as some tweaks into the build.prop file, but like said previously you don´t need them either, so it´s enough to flash just the Disable CPU Rendering MOD.
You can apply this mod to any CM9 based ROM for the SGW.
I was told it even works with GB based ROMs.
So it´s rather an easy MOD and quite easy to undo unlike all the other engine MODs and scripts.
honeyx said:
This is exactly what the Disable CPU Rendering MOD will do. Exept adreno_config.txt is not added because it´s not needed. So you can do it manually, but flashing it is more comfortable.
The Buttersmooth MOD will also add the adreno_config file as well as some tweaks into the build.prop file, but like said previously you don´t need them either, so it´s enough to flash just the Disable CPU Rendering MOD.
You can apply this mod to any CM9 based ROM for the SGW.
I was told it even works with GB based ROMs.
So it´s rather an easy MOD and quite easy to undo unlike all the other engine MODs and scripts.
Click to expand...
Click to collapse
Yes i agree.. its more comfortable to flash it..
Sent from my GT-I8150
can someone confirm that it works with gingerbread?
---------- Post added at 01:40 PM ---------- Previous post was at 01:16 PM ----------
utingbato said:
uu pre pinoy ako hehehe :good:
1. go to folder system / lib / egl
2. edit egl.cfg file
3. delete "0 0 android" Line
4. then rename libGLES_android.so >>> libGLES_android.so.bak (dont delete so you can restore it if you want)
5. copy adreno_config to system / etc
6. reboot :good:
Click to expand...
Click to collapse
ok instead of "0 0 android" I should write there "libGLES_android.so" and then save it as "libGLES_android.so.bak", right?
because in gingerbread there is also the egl.cfg.
edit:
nevermind I had a brainlag, now I understand ...
tried on mutant rom only with Disable CPU Rendering,the result is better than update newer driver. but if i flash buttersmooth for cm9(but i still using gb),the performance drop like hell.
Sent from my GT-I8150 using xda app-developers app
You shouldn´t flash the Buttersmooth for CM9 in GB. The tweaks there are only for ICS/CM9 and will cause a drop in performance. So only use Disable CPU Rendering.
But you can edit build.prop and remove the tweaks added there.
honeyx said:
You shouldn´t flash the Buttersmooth for CM9 in GB. The tweaks there are only for ICS/CM9 and will cause a drop in performance. So only use Disable CPU Rendering.
But you can edit build.prop and remove the tweaks added there.
Click to expand...
Click to collapse
haha....i know it is for cm9. just try to test the result and let others know what is the cost. just being naughty. i have do my nand backup before flash,thanks for caring.
Sent from my GT-I8150 using xda app-developers app
when I delete the line "0 0 android" and then save it, it wont save. when I open the file then, there is again "0 0 android". and when I rename libGLES.so.bak its again libGLES.so after.
so it doesnt work with gingerbread? I already restarted, but there is no difference.
Fensterbank said:
when I delete the line "0 0 android" and then save it, it wont save. when I open the file then, there is again "0 0 android". and when I rename libGLES.so.bak its again libGLES.so after.
so it doesnt work with gingerbread? I already restarted, but there is no difference.
Click to expand...
Click to collapse
You need to mount the directory as Read/Write as its mounted as ReadOnly, but why are you doing it manually if you simply can flash the file and all will be done for you?
Related
Version 7 of Cow ROM: Bionic Cow 2.
- For arco68
It's basically an update to Bionic Cow using latest firmware from Sammy - I8150DXLC1. Features:
1) The OC kernel has been rewrote. It should be more stable and graphic score improved.
2) Bionic Scorpion Optimization library. Using NEON instructions for faster memory operations. Learned from arco68 github for ICS.
3) CowPanel 2 - use this util to configure VSYnc on/off. For speed, use VSync off. For smooth, use VSync on + triple buffering. Read more here. You also may configure zRam option here. zRam is off by default. Read more here.
4) Many CPU governors: Default using OnDemandX for best battery; 80% left in 24 hours. Use "Performance" for benchmarking.
5) More RAM - 358Mb available, compare to 351Mb in stock ROM.
6) Using a super light Zeam Launcher. Thanks cloakt for permission to use.
7) Internal / external sd card swap, CRT screen off effect, Low Memory Killer Tweaked, OnDemandX tweaked, Custom Bootup animation and Larger SD Card cache, Voice Search, etc.
8) Based on arco68 GB kernel. Without which, none of this is possible.
Special thanks to arco68, tch9, andynroid and pinkyunki, Murny Umairah, Myrule Anarki, Santos San Martin and Mohd Fazrin Daud from SGW group.
*WARNING*: Don't use OC ROM unless you know what you are doing. The ROM will automatically reset to 1.4ghz - OnDemandX after reboot as a safety precaution. I only set to 1.8ghz OC for short time during Cheat Engine hacks, zip / unzip, benchmark, etc. I always reset back to max 1.4ghz for normal used. I strongly recommend you to set a temperature profile if CPU ever get above 50C you should lower max clock back to 1.4ghz.
So, here is the link:
None Overclock:
Part 1: http://www.mediafire.com/?b0hcu82bpq9cu9n
Part 2: http://www.mediafire.com/?6qy19q4995g75w0
Overclock:
Part 1: http://www.mediafire.com/?7k7ei26n46e44bb
Part 2: http://www.mediafire.com/?e368mc427y19611
Here is how to install the ROM:
1. Enable recovery.
2. Use 7zip, right click on xxxx.001, extract. It will create the zip file required for flashing. Copy this zip into your phone. (Don't extract xxx.002)
3. Boot into ClockWorkMod / RZRecovery, backup your current ROM using nandroid (just in case).
4. If you are upgrading from my previous ROM;
- BEFORE installing the ROM, Uninstall CowPanel: Setting, Application, Cowpanel, uninstall
- Wipe Dalvik-cache. All your settings and app will remained. Theme will changed though.
5. If you are installing from stock or from other custom ROM, best to wipe everything using CWM, including your USB and external sd card. Reinstall everything from fresh, don't restore anything from Titanium Backup or anything.
Google Map? Missing apk? Original theme? If you want to restore to stock theme, get all the apk here.
Report Problem: If you encounter FC or any problem, please provide logcat so I may trace it:
1. Connect phone to USB
2. adb logcat > log.txt
3. In your phone, reproduce the crash / FC / etc
4. Kill all adb process in your PC
5. Zip and send me the log.txt
Update Radio Firmware
I8150DXLC1 comes with an updated Radio firmware. This should improve voice call quality. Check if you need to update this, go to Check "Setting", "About phone", "Baseband version". If you already have I8150DXLC1 or newer you dont need this. If not, use Odin to flash this. This will only update the Radio firmware, nothing else will change. You can do this before or after install Bionic Cow 2 ROM.
1. Get Odin.
2. Get ancora.ops.
3. Get radio firmware.
4. Boot into "download mode". Connect phone to PC. Start Odin
5. Select OPS file = ancora.ops. Select One Package = radio firmware, check "One package", "Auto reboot", "Protect OPS".
6. Start and wait till it complete.
Old Bionic 1
Non-oc:
Part 1: http://www.mediafire.com/?6994bk9qhxkde8w
Part 2: http://www.mediafire.com/download.php?gvc1j2da6c51u5a
- Refer to this guide on how to extract this. Thanks andynroid.
OC: (link fixed)
Part 1: http://www.mediafire.com/?cr5nc6zb1k5w0ye
Part 2: http://www.mediafire.com/download.php?u1xp01yr15saujw
Disclaimer: I am not responsible if you brick your phone I tried it, it work on my phone and a few others.
wow. downloading, will try and post feedback. did you add any languages? do you know a way to do so? thanks
cowithgun said:
This is my 6th ROM! It has all the benefit from all my previous ROM and more. Featuring Bionic Theme created specifically for this ROM! This ROM is a result from group of friends helping each other. Without it, it would be so bore and this ROM may never exist. Thanks pinkyunki, Murny Umairah, Myrule Anarki, andynroid and all the friends from our SGW group.
Click to expand...
Click to collapse
Awww Yeaaah! Just what i need! Hehehe what a coincidence when i said about theme-ing just now. Currently downloading your Bionic ROM!
Btw, is the scale-old-tv present in this ROM, Cow? HAHA! xDD
The Six Million Dollar Man...This Is The Six Million Dollar ROM !
Congratulations CWG.....!
Sent from my GT-I8150 using xda premium
andynroid said:
The Six Million Dollar Man...This Is The Six Million ROM !
Congratulations CWG.....!
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Thanks! I did spent more time on this ROM than in any other ROM.
andynroid said:
The Six Million Dollar Man...This Is The Six Million Dollar ROM !
Congratulations CWG.....!
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
You're one of the respected members in building this ROM, right? Wish i could be as great as you guys, developing something. Haih. :/
Downloading noww.!!!!xD
sent from another space
Thanks for this wonderfull rom cow!!
Antutu 5067 on 1,8GHz !
I really love the theme, very nice!!
Thanks my friend!!
As now, i'm using your Bionic, Cow. Love the green-ish theme, seems smoothly smart!
A few things btw :
1. When booting up, there is still sound of the boot animation. How to disable it?
2. When locking the phone, the transition is somewhat like distortion-type, not like the scale-old-tv in your previous ROM. Is it supposed to be that way or my phone goes wrong?
3. The "3G icon" in status bar alternately goes from small to big and vice versa. Also is this meant to be as such? :/
Apart of those, it is indeed a GREAT and SUPERB ROM.
Sent from my GT-I8150 using xda premium
Arrgh at 58% DL.......Part-2....
CRT......The ROM is too fast for it to execute...
Sent from my GT-I8150 using xda premium....Using CWG V6 TestBuild
TuxBrothers said:
Thanks for this wonderfull rom cow!!
Antutu 5067 on 1,8GHz !
I really love the theme, very nice!!
Thanks my friend!!
Click to expand...
Click to collapse
For benchmarking, you set to 1.8GHz for both minimum and maximum right? What governor did you use when using Antutu?
Sent from my GT-I8150 using xda premium
This ROM looks absolutely incredible
I envy you guys...i would love to use this rom, but unfortunately i need swype in czech, so this rom is not for me I wish you'd use European rom as a base for your roms ( maybe in the future? )
Why is everybody awake here...looks like somebody will be on MC due to COW BIONIC FOBIA.....
Its 4am here....bye guys be extracting n zipping n CWM.....BRB !
Sent from my GT-I8150 using xda premium
MAMUTHcz said:
This ROM looks absolutely incredible
I envy you guys...i would love to use this rom, but unfortunately i need swype in czech, so this rom is not for me I wish you'd use European rom as a base for your roms ( maybe in the future? )
Click to expand...
Click to collapse
i would like my little brother try this rom but no italian.
Inviato dal mio GT-I9100 usando Tapatalk
andynroid said:
Why is everybody awake here...looks like somebody will be on MC due to COW BIONIC FOBIA.....
Its 4am here....bye guys be extracting n zipping n CWM.....BRB !
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
it's 9:53 pm here in czech republic + I have night shift so no sleep for me right now
When im at home i will download and flash... Huhuhuh.
Sent from my GT-I8150
My Antutu none OC...
Sent from my GT-I8150 using xda premium
SyzwnFrzRdz said:
For benchmarking, you set to 1.8GHz for both minimum and maximum right? What governor did you use when using Antutu?
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
min speed ? ondemand or ondemandx ?
I must be dumb.
I download xxx.7z.001 and xxx.7z.002.
Right click on 001: extract here puts META-INF, data and system folders and the other files in the folders I am working in. If I right click and extract to GT-I8150-BIONIC it just puts those files in a folder. No sign of a flashable zip.
What am I doing wrong?
Bomoh, an user who doesn't have permission to post in Dev section yet, told me this solution and it's working. Thanks to him!
Extract 001 in a folder > select all the files > right click > 7-zip > add to archive.
In 7-zip window, change "Archive format" option from "7z" to "zip" then click OK.
Click to expand...
Click to collapse
Btw. This rom have portuguese on it?
Sent from my GT-I8150
Hai. Im new here. Just wanted to share this awesome script. Im using Bionic Cow OC and after flash this script my quadrant score managed to hit 2300-2500. The highest is 2845. Significants improvement in i/o. Im not sure if our kernel support init.d scripts but for me it works.
Sorry for my bad english
http://forum.xda-developers.com/showthread.php?t=1236779
All credits goes to the authors.
I just flash this adrenaline tweak. I only feel the scroling speed is increase. The init.d script is not running cause i tested with v6 supercharged script. Btw....thx for sharing.
Sent from my GT-I8150 using XDA
hey dude can you tell me which file you downloaded for sgw ??
and can you explain how to flash it into sgw thanks in advance
Im using Universal_Adrenaline_Shot_v14-1.zip. If you get bootloop after flashing that one, flash Universal_Adrenaline_Shot_v14-BL-1.zip instead. Go to recovery, mount system and flash. Happy testing
tomatoman23 said:
Hai. Im new here. Just wanted to share this awesome script. Im using Bionic Cow OC and after flash this script my quadrant score managed to hit 2300-2500. The highest is 2845. Significants improvement in i/o. Im not sure if our kernel support init.d scripts but for me it works.
Sorry for my bad english
http://forum.xda-developers.com/showthread.php?t=1236779
All credits goes to the authors.
Click to expand...
Click to collapse
Hi
I don't know but the developers missed one "important part"
The lib "libncurses" doesn't included
This file needed for sqlite3 to run and defrag the database
So the sqlite in this script will not run
Maybe the developer just get it in ACE thread and never know it
and
This script in init.d folder cannot run automatically
Because wonder kernel "this time" cannot start the init.d
so you must run in manually by script manager
Meanwhile i used some thing like this optimization for Black Notes
Regards
thank you rio for your professional review but now i dont think we need this script anymore because cowitgun already optimized I/O performance in his newest bionic rom.
im running on RS(rio saputro) custom blacknote chapter 3 rom and i flash the adrenaline but my quadrant I/O doesnt seems to increase as much as your tomatoman ... how come ?
i also dont know how come my quadrant score increase by the fact that our kernel doesn't support init.d script and im not running it manually and also we all know bionic v6 score quite low in I/O. Maybe because im using the overclock one. But dont rely on quadrant because as long as the rom is fast and smooth enough, it doesn't matter.
yeah true to that ...
but im just worried about my battery that's why i tried flashing the adrenalin
i think i need a new battery .. good thing the warranty for the battery is still available
chocolemon said:
im running on RS(rio saputro) custom blacknote chapter 3 rom and i flash the adrenaline but my quadrant I/O doesnt seems to increase as much as your tomatoman ... how come ?
Click to expand...
Click to collapse
Chapter 3, essential release and hybrid already has own optimization
This script will not effect much
hhey Rs do i need to wipe anything before i flashed the essential release ???
chocolemon said:
hhey Rs do i need to wipe anything before i flashed the essential release ???
Click to expand...
Click to collapse
Yes off course
awwww but i dont want to lose any of my stuff anymore is there another way ?
Can you tell the upgrade you did on the essential ?? i might just change my mind
chocolemon said:
awwww but i dont want to lose any of my stuff anymore is there another way ?
Can you tell the upgrade you did on the essential ?? i might just change my mind
Click to expand...
Click to collapse
What your rom before ?
Is your based Chapter 3, in theory it can be done
But I'm not really sure
Essential is like hybrid without animation boot and screen flickering
chocolemon said:
awwww but i dont want to lose any of my stuff anymore is there another way ?
Can you tell the upgrade you did on the essential ?? i might just change my mind
Click to expand...
Click to collapse
Just do a Nandroid backup + titanium backup of your apps&data. Other stuff like music, pictures... put them in your external_sd.
btw, Essential is good. Thx RS (Rasa Sayang)
hahaha
Previous Rom:KErza Plane v4 final
= :Hybrid rom Rs
Current rom:Blacknotes chapter 3 with beats audio mod and adrenaline tweak
Baseband: I8150xxkk1
Android version 2.3.6
Kernel Version [email protected]#3
---------- Post added at 07:51 AM ---------- Previous post was at 07:48 AM ----------
yewsiong said:
Just do a Nandroid backup + titanium backup of your apps&data. Other stuff like music, pictures... put them in your external_sd.
btw, Essential is good. Thx RS (Rasa Sayang)
hahaha
Click to expand...
Click to collapse
Sorry to double post but is Nandroid Backup is the same as CWM backup ??
and the thing about TB is after i backup my data and try to restore it after i flashed a new rom it just wont let me ...
yewsiong said:
Just do a Nandroid backup + titanium backup of your apps&data. Other stuff like music, pictures... put them in your external_sd.
btw, Essential is good. Thx RS (Rasa Sayang)
hahaha
Click to expand...
Click to collapse
Don't forgot press thanks button
-_-"
And don't say Rio Sayang except you're girl or i'll i kick your a**
chocolemon said:
Previous Rom:KErza Plane v4 final
= :Hybrid rom Rs
Current rom:Blacknotes chapter 3 with beats audio mod and adrenaline tweak
Baseband: I8150xxkk1
Android version 2.3.6
Kernel Version [email protected]#3
---------- Post added at 07:51 AM ---------- Previous post was at 07:48 AM ----------
Sorry to double post but is Nandroid Backup is the same as CWM backup ??
and the thing about TB is after i backup my data and try to restore it after i flashed a new rom it just wont let me ...
Click to expand...
Click to collapse
yeah, CWM backup is considered as Nandroid backup.
huh? what do u mean it won't let u to do so? have u selected the correct backup folder location? U can run a batch restore by using Pro version. but of course, u need to PAY for the convenience.
@Rio, LOL, i said "Rasa" sayang. haha~~ Rasa sayang hey~ rasa sayang sayang hey~ ==|||
i need to wipe cache and factory reset right ???
is it works with CyanogenMod 9 - acro68's ICS?
This will enable the loading of scripts in /system/etc/init.d without editing the boot.img.
This will work for ALL dual core S3 variants.
There are two versions, one with my ondemand profile and one without. The one that has CPUProfile has it, this is a script that runs at boot setting the ondemand options to favor battery without sacrificing performance. Most user saw a GREAT increase in battery life especially when idle. See the link in my sig to use the full cpu editor. (works on the S3 with this mod)
To add init.d manually to your own rom just open /system/etc/init.qcom.post_boot.sh and add this line to the end of the file:
Code:
/system/etc/init.d/*
This mod also installs busybox which enables alot of tools native to busybox see here for busybox usage.
To install flash in recovery.
Download:
Add init.d ONLY:
EZ_Init.d ONLY
Add init.d and CPUProfile Script:
EZ_Init.d AND CPUProfile
So does this tweak the onDemand governor? Is it safe to use with setCPU? Is it safe with the Sammy kernel?
Nevermind...found the Sammy kernel thread under "original development"
good work man nice another great addition to the gs3
Works as advertised, thanks for this!
Sent from my SPH-L710 using Tapatalk 2
thanx but
Not sure why do you need to mount /system as writable in init.d script. Does that mean regular init.d scripts won't work?
bravomail said:
Not sure why do you need to mount /system as writable in init.d script. Does that mean regular init.d scripts won't work?
Click to expand...
Click to collapse
I do in all my scripts guess Its habit lol. But Its not necessary for most scripts
Sent from my SAMSUNG-SGH-I747 using xda premium
smokin1337 said:
I do in all my scripts guess Its habit lol. But Its not necessary for most scripts
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Then pls fix it if it is not too much trouble. I know publishing is kinda pain.
Mounting system as writable is a no-no.
bravomail said:
Then pls fix it if it is not too much trouble. I know publishing is kinda pain.
Mounting system as writable is a no-no.
Click to expand...
Click to collapse
I'm not trying to be a wise ass here but why is mounting system as writable a bad thing? Every device I've had never gave me a problem when I did it actually makes a few things easier when your in a pinch.
Is it because of Odin?
Sent from my HTC VLE_U using xda premium
Can we see some proof or evidence from users that this does indeed give significantly better battery usage when idling without impacting performance?
smokin1337 said:
This will enable the loading of scripts in /system/etc/init.d without editing the boot.img.
This will work for ALL dual core S3 variants.
There are two versions, one with my ondemand profile and one without. The one that has CPUProfile has it, this is a script that runs at boot setting the ondemand options to favor battery without sacrificing performance. Most user saw a GREAT increase in battery life especially when idle. See the link in my sig to use the full cpu editor. (works on the S3 with this mod)
To add init.d manually to your own rom just open /system/etc/init.qcom.post_boot.sh and add this line to the end of the file:
Code:
/system/etc/init.d/*
This mod also installs busybox which enables alot of tools native to busybox see here for busybox usage.
To install flash in recovery.
Download:
Add init.d ONLY:
EZ_Init.d ONLY
Add init.d and CPUProfile Script:
EZ_Init.d AND CPUProfile
Click to expand...
Click to collapse
Do you flash this in stock recovery or cwm?
Worked at flash... Does this conflict with the CPU disabler script?
Sent from my SPH-L710 using xda premium
---------- Post added at 12:15 PM ---------- Previous post was at 12:08 PM ----------
bgs_piece said:
Do you flash this in stock recovery or cwm?
Click to expand...
Click to collapse
CWM for me...I also added the ramscript to the folder http://forum.xda-developers.com/showthread.php?t=1111145...along with the CPU disabler script too...
---------- Post added at 12:27 PM ---------- Previous post was at 12:15 PM ----------
smokin1337 said:
This will enable the loading of scripts in /system/etc/init.d without editing the boot.img.
This will work for ALL dual core S3 variants.
There are two versions, one with my ondemand profile and one without. The one that has CPUProfile has it, this is a script that runs at boot setting the ondemand options to favor battery without sacrificing performance. Most user saw a GREAT increase in battery life especially when idle. See the link in my sig to use the full cpu editor. (works on the S3 with this mod)
To add init.d manually to your own rom just open /system/etc/init.qcom.post_boot.sh and add this line to the end of the file:
Code:
/system/etc/init.d/*
This mod also installs busybox which enables alot of tools native to busybox see here for busybox usage.
To install flash in recovery.
Download:
Add init.d ONLY:
EZ_Init.d ONLY
Add init.d and CPUProfile Script:
EZ_Init.d AND CPUProfile
Click to expand...
Click to collapse
smokin OP and Dev of this mod.
I copied the CPU Sleeper script (Eugene373) http://forum.xda-developers.com/showthread.php?t=1745517 and the Ram Manager script (Juwe11) http://forum.xda-developers.com/showthread.php?t=1745517 into the flashable you made...can I share it if I give you props?:fingers-crossed:
I flashed this in CWM and found the init.d folder with scripts installed.
When I opened the 99test script, I noted that a test file with "done" should have been created in data/local/tmp. I could not find this file anywhere.
Am I looking in the wrong place or am I correct in assuming that init.d functionality is not working?
Pj
Phoenix, AZ
This may be a noob question, but I didn't see it in the OP. How do I uninstall this??
the links are dead is there another place i can download this file
Bump
Sent from my SGH-I747 using Tapatalk 2
mvaughn12 said:
the links are dead is there another place i can download this file
Click to expand...
Click to collapse
+1
Sent from my SGH-T999 using xda app-developers app
jjlean said:
+1
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Here is a working link
http://sourceforge.net/projects/xquizit/files/T999/Apps/init.d Support.zip/download
Sent from my SGH-T999 using Tapatalk 2
Wildchld said:
Here is a working link
http://sourceforge.net/projects/xquizit/files/T999/Apps/init.d Support.zip/download
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Install fails?????
bradld said:
Install fails?????
Click to expand...
Click to collapse
No he fixed it. Installs fine. You can Odex after running it.
Sent from my SGH-T999 using xda app-developers app
is this still working on stock JB?
cuz I can't get my scripts to work.
1) i want change apps system for example Apollo, Message, Keyboard with apps from other rom...how do?
2) i have read in the fxp before 141 that if i do a nandroid backup i delete all file in sd...this problem is solved in fxp141 true?...
the first is more important!!...
for 1: -
I think the easiest answer here is to do this: -
Open the zip file that is the downloaded rom
go to folder "system/app"
Delete any apk files that you don't want installed
Dray ang apk files that you do want installed into this folder
You can download "7zip" for free - it allows you to delete and insert files into a zip file.
for your 2nd question: -
CWM backs up and restores correctly using one of the custom kernels (no formatting of sdcard).
I've used Lupus, and ArcFusion - they both work.
There is a "glitch" with all CM10 versions of CWM - each time you move up or down in the menu the display does something funny (@besttt describes it as "dances"). This doesn't affect the way CWM works, only the way it looks.
Enjoy.
Hotfingers said:
for 1: -
I think the easiest answer here is to do this: -
Open the zip file that is the downloaded rom
go to folder "system/app"
Delete any apk files that you don't want installed
Dray ang apk files that you do want installed into this folder
You can download "7zip" for free - it allows you to delete and insert files into a zip file.
for your 2nd question: -
CWM backs up and restores correctly using one of the custom kernels (no formatting of sdcard).
I've used Lupus, and ArcFusion - they both work.
There is a "glitch" with all CM10 versions of CWM - each time you move up or down in the menu the display does something funny (@besttt describes it as "dances"). This doesn't affect the way CWM works, only the way it looks.
Enjoy.
Click to expand...
Click to collapse
thxxxxxxxxx it was what I was searching!!!!
moreover i knew the "glitch" because i have arc fusion xD but i'm curious....in your signature i have see that you have fxp141 with corrections...which are this corrections?? and v6 supercharger isn't included in the rom??
You need to search the thread for fxp 141 fixes by @besttt.
The fixes for 141 are not complicated. Just one file to be flashed after install.
I just run supercharger to set the "min frees" and to bulletproof my phone app. You don't need services.jar modified on this rom.
It is fast!
sent from my supercharged LT15i using xda app
Hotfingers said:
You need to search the thread for fxp 141 fixes by @besttt.
The fixes for 141 are not complicated. Just one file to be flashed after install.
I just run supercharger to set the "min frees" and to bulletproof my phone app. You don't need services.jar modified on this rom.
It is fast!
sent from my supercharged LT15i using xda app
Click to expand...
Click to collapse
sry i don't find the zip...where is??
Hmmm its post 2344
sent from my supercharged LT15i using xda app
---------- Post added at 09:11 PM ---------- Previous post was at 09:02 PM ----------
Hey, I just figured out how to copy a link with the tapatalk app...
Here's a link to the post with the fix...
http://forum.xda-developers.com/showthread.php?p=32523177
Enjoy
sent from my supercharged LT15i using xda app
fixes for FXP CM10 -
http://forum.xda-developers.com/showthread.php?t=1918244
I noticed that there are a lot of great tweaks out there for android phones, but most users cant find them because they're distributed all over XDA. So here i am, with a collection of those tweaks, in an All in one flashable zip. Merged some, modified some, add a lot. Its pretty much a universal tweak, it will work on every device, except for 2 or 3 files modified to work on our Xperia M.
And if your going to add this to your ROm, please let me know and add me to the credits!
How to's-
Install:
1. Boot into CWM
2. Wipe dalvik cache
3. Flash zip
4. Reboot
Do note that the ROM will take time to boot up, so don't go on doing something crazy like removing the battery.
Thunder Features:
-Cleaned up
-MUCH better Ram usage
-Cache Cleared at every boot
-SD speed tweak
-Logger removed
-Better browser performance
-Sysctl tweaks
-Added modified Zram script
-Better battery life
-Lag? GONE
-Faster GUI
-Loopy smoothness tweak
-Apps zipaligned at every boot
-Faster Networking
-Smoother LWP animation
-Adrenaline boost
-Kernel Tweaks
-Better gaming
Supported:-
All devices with init.d support
-All GB ROMs
-All ICS ROMs
-All JB ROMs
-All KK ROMs - Found some tweaks working here, tested.
credits-
yash989
Sohan Rawat
Imbawind
All the owners of their tweaks.
And me for getting them bunched, testing and modding.
#1. Keep The Thread Clean Of Crap, Else Mods Will Take Good CARE Of Your Posts And Profile.
#2. Don't quote the whole OP in your replies. It's against Xda's rules.
#3. Check Downloads In Post #2.
Thanks.
Regards,
Kaustubh Chauhan
Downloads ::
Download From 4shared :
Click Me !! Babe !!
Download from Mediafire -
Hit Me Baby !! Yo !!
Socialize !
Socialize with me --
Add me on facebook -
Thakur Kaustubh Chauhan
Follow me on twitter -
Kaustubh Chuahan
Join me on whatsapp -
+917023857879
Choice is yours..
gonna try this..
but first, I need to ask permission first to my wife coz the device isn't mine..
One question before o try this...
Instead of init.d from kernel, can i run the scripts from init.qcom.post_boot.sh?
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Antrikos48 said:
One question before o try this...
Instead of init.d from kernel, can i run the scripts from init.qcom.post_boot.sh?
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Click to expand...
Click to collapse
Don't know much bout this method... Since, this device is new to me.. I'll suggest you to flash via cwm for safety..
kaustubh.rockstar said:
Why try something hard when you have an easy method available. .sh method may not work or it may. I don't know anything 'bout this method. Since, I have bought this device just now few days back.
Coming from the Samsung Series, I have very less idea 'bout this phone.
Cutting the **** in short - Test it via init.d method, or via that .sh method you stated. Tell me bout it if you don't mind..
Click to expand...
Click to collapse
Let me explain. Stock kernel doesn't support init.d and i don't have an unlocked bootloader. I will flash the zip with Flash Gordon. To execute the scripts I will modify that file, which executes post boot obviously, to execute those scripts. Just by adding the line:
/etc/init.d/*
you get init.d support in stock kernel
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Antrikos48 said:
Let me explain. Stock kernel doesn't support init.d and i don't have an unlocked bootloader. I will flash the zip with Flash Gordon. To execute the scripts I will modify that file, which executes post boot obviously, to execute those scripts. Just by adding the line:
/etc/init.d/*
you get init.d support in stock kernel
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Click to expand...
Click to collapse
Gotcha, thanks for the info mate.
Antrikos48 said:
Let me explain. Stock kernel doesn't support init.d and i don't have an unlocked bootloader. I will flash the zip with Flash Gordon. To execute the scripts I will modify that file, which executes post boot obviously, to execute those scripts. Just by adding the line:
/etc/init.d/*
you get init.d support in stock kernel
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Click to expand...
Click to collapse
Hey mate.. ive modified the file you said and added the "/etc/init.d/*" at the very bottom of the init.qcom.post_boot.sh file and flashed in flash gordon (i also dont have an unlocked bootloader).
Nothing seems to have happened though... am i missing something? Did you get this tweak to work?
Regards,
Chris.
---------- Post added at 05:52 PM ---------- Previous post was at 05:40 PM ----------
ok so just to clarify, ive scrolled to the bottom of the init.qcom.post_boot.sh file pressed return so there is a space then added the /etc/init.d/* so it looks like this...
" ;;
esac
/etc/init.d/*"
Is this correct? first time i did it i got a bootloop :S so i just took the battery out and back in and it booted fine... the phone booted normally though - didnt take ages as suggested, not sure if its working or not :S the phone seems fluid and fast but it always has since i got it (thats why im not overly stressed that i cant unlock my bootloader and get elixer yet) and i haven't added any mods/or tweaks apart from AC!D audio mod and the x-reality engine.
Any info from the OP or you Antrikos would be greatly appreciated, thanks.
**OK i think i have it working, but i just did an Antutu benchmark and ive gone from 1163 to 10602 :S surely that cant be right?**
mindyabiznis said:
Hey mate.. ive modified the file you said and added the "/etc/init.d/*" at the very bottom of the init.qcom.post_boot.sh file and flashed in flash gordon (i also dont have an unlocked bootloader).
Nothing seems to have happened though... am i missing something? Did you get this tweak to work?
Regards,
Chris.
---------- Post added at 05:52 PM ---------- Previous post was at 05:40 PM ----------
ok so just to clarify, ive scrolled to the bottom of the init.qcom.post_boot.sh file pressed return so there is a space then added the /etc/init.d/* so it looks like this...
" ;;
esac
/etc/init.d/*"
Is this correct? first time i did it i got a bootloop :S so i just took the battery out and back in and it booted fine... the phone booted normally though - didnt take ages as suggested, not sure if its working or not :S the phone seems fluid and fast but it always has since i got it (thats why im not overly stressed that i cant unlock my bootloader and get elixer yet) and i haven't added any mods/or tweaks apart from AC!D audio mod and the x-reality engine.
Any info from the OP or you Antrikos would be greatly appreciated, thanks.
**OK i think i have it working, but i just did an Antutu benchmark and ive gone from 1163 to 10602 :S surely that cant be right?**
Click to expand...
Click to collapse
For confirmation of script's installation, head towards system/etc/init.d to see if the folder exists, and if there are same files as that in the zip.
And antutu benchmarks are never stable. All I want is that your phone remains lagfree and smooth regardless of the antutu or other crap.
Thanks.
Regards,
Kaustubh
Sent via Xperia Nicki [c1904]
kaustubh.rockstar said:
For confirmation of script's installation, head towards system/etc/init.d to see if the folder exists, and if there are same files as that in the zip.
And antutu benchmarks are never stable. All I want is that your phone remains lagfree and smooth regardless of the antutu or other crap.
Thanks.
Regards,
Kaustubh
Sent via Xperia Nicki [c1904]
Click to expand...
Click to collapse
Ok, thanks for the quick response but i dont have ANY init.d files or folders in system/etc... im assuming i should have? i dont have an unlocked bootloader and am on stock kernel though.
Should i create an init.d folder and reflash the zip using flash gordon?
mindyabiznis said:
Ok, thanks for the quick response but i dont have ANY init.d files or folders in system/etc... im assuming i should have? i dont have an unlocked bootloader and am on stock kernel though.
Should i create an init.d folder and reflash the zip using flash gordon?
Click to expand...
Click to collapse
Hey which ac!d that you use? I get bootloop when install the v7
Sent from my C1905 using XDA Premium 4 mobile app
roulley said:
Hey which ac!d that you use? I get bootloop when install the v7
Sent from my C1905 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
keep the thread on topic please.
mindyabiznis said:
Ok, thanks for the quick response but i dont have ANY init.d files or folders in system/etc... im assuming i should have? i dont have an unlocked bootloader and am on stock kernel though.
Should i create an init.d folder and reflash the zip using flash gordon?
Click to expand...
Click to collapse
Hold on a second... Elixir don't support init.d. We need to create a folder manually for that...
Don't flash with Flash Gordon. Copying and pasting the files from the zip to their respective paths is much easier imo. That's how I did it. And I edited the init.qcom.post_boot.sh manually, didn't flash it.
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Can it be installed on stock kernel on Xperia M Dual
Sent from my Xperia M Dual C2004 using Tapatalk 4 Premium
---------- Post added at 10:20 PM ---------- Previous post was at 10:20 PM ----------
An if yes how to install it
Sent from my Xperia M Dual C2004 using Tapatalk 4 Premium
As I said, create a folder in etc named init.d ... And copy the contents there...
That's it.
Please see this post for init.d support on stock..
guys creating init.d folder wont make init.d support,...
u need this
http://www.androidfilehost.com/?fid=9390248398092764054
details on init.d and the original apk which in the above link is from this thread
http://forum.xda-developers.com/showthread.php?t=1933849
kaustubh.rockstar said:
As I said, create a folder in etc named init.d ... And copy the contents there...
That's it.
Click to expand...
Click to collapse
Right I tried copying the files to their respected folders from the zip but my phone just restarts...
ive installed the init.d apk and im reflashing using flash Gordon now ive rebooted and it says its optimising applications etc
OP if I copy the zip contents to the init.d folder do I just copy them all as they are i.e the bin folder etc folder and the the other one into the init.d folder
sorry to be a pain, im hardly a n00b to this stuff (I had an xperia ray before this modded to f**k) but ive tried running the supercharger script and EVERY time it just reboots my phone, so im trying this one and ive modified the init.qcom.post_boot.sh like antrikos said.
ive got FULL root and ive flashed using flash Gordon, but it wont let me copy the files to their respected folders using a root explorer EVEN after changing the permissions (EVERY time I copy a file to the system my phone just restarts :S) never had this problem on my ray.
Oh and btw to the person that asked I flashed the v7 acid mod using flash Gordon... worked perfectly first time... dno why you might be having problems mate sorry...
grrr I wish I just could unlock the bootloader - would make things soooo much easier.
***update right now flash Gordon is telling me that its not a flashable zip?? :S confused because before it said it was fine***
---------- Post added at 01:56 AM ---------- Previous post was at 01:30 AM ----------
right ive manually copied all the files from the zip but if wont let me copy the xbin folder... just restarts.
got any ideas anyone?
massively appreciate any help and will thank all of you
---------- Post added at 01:57 AM ---------- Previous post was at 01:56 AM ----------
right ive manually copied all the files from the zip but if wont let me copy the xbin folder... just restarts.
got any ideas anyone?
massively appreciate any help and will thank all of you
Just got init.d support thanks
Sent from my Xperia M Dual C2004 using Tapatalk 4 Premium