Related
I was wondering how i can find the msl code on my samsung galaxy iii phone. I know there was an app for that on the evo. I know its different with this phone if anyone knows how to obtain it please let me know thanks
sflecha35 said:
I was wondering how i can find the msl code on my samsung galaxy iii phone. I know there was an app for that on the evo. I know its different with this phone if anyone knows how to obtain it please let me know thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1745888
I have tried all methods and do not have my msl code. I own phone but not on Sprint.
Sent from my SPH-L710 using Tapatalk 2
rigel1326 said:
I have tried all methods and do not have my msl code. I own phone but not on Sprint.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Are you on a Touchwiz based ROM?
sflecha35 said:
I was wondering how i can find the msl code on my samsung galaxy iii phone. I know there was an app for that on the evo. I know its different with this phone if anyone knows how to obtain it please let me know thanks
Click to expand...
Click to collapse
Try this...go the data menu in the dialer and get to the point where you have to enter your msl. Enter 6 zero's and hit OK. The pull a logcat (you van use alogcat, free from the play store). Scan through the lines and your correct msl should be in there...it might work, but worth a shot.
Sent from my SPH-L710 using xda premium
adamdelozier said:
Try this...go the data menu in the dialer and get to the point where you have to enter your msl. Enter 6 zero's and hit OK. The pull a logcat (you van use alogcat, free from the play store). Scan through the lines and your correct msl should be in there...it might work, but worth a shot.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
All you have to do is enter 000000 in ##3282# > edit and then open terminal emu and type getprop ril.MSL and it will show the correct MSL in the next line
I like to break stuff!
-EViL-KoNCEPTz- said:
All you have to do is enter 000000 in ##3282# > edit and then open terminal emu and type getprop ril.MSL and it will show the correct MSL in the next line
I like to break stuff!
Click to expand...
Click to collapse
When I do that string command in term after entering in the dialer I get nothing back.
Sent from my SPH-L710 using Tapatalk 2
---------- Post added at 07:57 AM ---------- Previous post was at 07:56 AM ----------
Android Attack said:
Are you on a Touchwiz based ROM?
Click to expand...
Click to collapse
Yes I'm on touchwiz based.
Sent from my SPH-L710 using Tapatalk 2
Depending on the a setup the msl may not be housed in ril. Did you try searching the logcat? I am on AOSP right now otherwise i would duplicate it and give ya screenshots. But i used this procedure a few weeks ago. Hope something works for you.
Sent from my SPH-L710 using xda premium
rigel1326 said:
When I do that string command in term after entering in the dialer I get nothing back.
Sent from my SPH-L710 using Tapatalk 2
---------- Post added at 07:57 AM ---------- Previous post was at 07:56 AM ----------
Yes I'm on touchwiz based.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Do this open dialer type ##72786# select edit type 000000 let it fail hit home key, select terminal and type this (case sensitive)
getprop ril.MSL
Hit enter and then it should show a six digit code in between the first line where u typed and the new cmd prompt. It'll be squished up on the left inbetween the 2 cmd lines. It works rooted or not on all twiz roms ive tried, on the sprint s2, s3 and note 2. Another way you can get it is to either go on sprint.com and choose to activate the phone online and put in the msid when it asks and then write it down but dont continue activation or just call customer service and ask them for it 9 times out of 10 they won't even ask any questions they'll just look it up for you
I like to break stuff!
Tried everything alogcat logcat extreme. This is a Sprint SG3 just flashed over to Boost. To get mms working I need MLS. Who should I call if all else fails?
Going to downgrade rom then retry. Would it help to be in cm instead of stock tw?
Sent from my SPH-L710 using Tapatalk 2
rigel1326 said:
Tried everything alogcat logcat extreme. This is a Sprint SG3 just flashed over to Boost. To get mms working I need MLS. Who should I call if all else fails?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Have you tried this method??
http://forum.xda-developers.com/showthread.php?t=1745888
You can also try to Open the voice dialer and say "Open APNs" and then choose "Open APNs" from the list that comes up. this is what you need to update for the mms right? the APN's? i am pretty sure you don't need the MSL using this method. Just not sure if it will work.
Also, i think you have to have USB debugging and adbshell active in your settings as well.
Trying like hell to help you here man!!
Flash this file (KIES_HOME_L710VPALEN_L710SPRALEN_618049_REV03_user_low_ship.tar) Search in google. Its Android 4.0.4.
download get my msl app from playstore. Then in the app select get my msl. once it shows error go into ##3282# and enter 000000 Then again go to get my msl app and then it will show your msl. Works perfect. Tried on 5-6 Phones.
;38378489 said:
Flash this file (KIES_HOME_L710VPALEN_L710SPRALEN_618049_REV03_user_low_ship.tar) Search in google. Its Android 4.0.4.
download get my msl app from playstore. Then in the app select get my msl. once it shows error go into ##3282# and enter 000000 Then again go to get my msl app and then it will show your msl. Works perfect. Tried on 5-6 Phones.
Click to expand...
Click to collapse
See I like an expert who really gives you the problem and solution. Thank you
ankurcshah. Downgrade rom, now the baby pops. Run commands get code.
Sent from my SPH-L710 using Tapatalk 2
rigel1326 said:
See I like an expert who really gives you the problem and solution. Thank you
ankurcshah. Downgrade rom, now the baby pops. Run commands get code.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Should see if this could be stickied! Another question that comes up all the time with 30 different options to fix. Glad this worked for ya.
Sent from my SPH-L710 using xda premium
rigel1326 said:
See I like an expert who really gives you the problem and solution. Thank you
ankurcshah. Downgrade rom, now the baby pops. Run commands get code.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
I am downloading the file as I type this, but I was wondering after you flash this file and got your MSL, did the phone auto update to the latest versions of everything automatically? I am having the same problem, my phone was flashed to Boost, but I need to fix my MMS settings. No method I have tried has been able to give me the MSL. I am on a stock root.
Here are my specs:
Android Ver: 4.1.2
Build #:jzo54k.l710vpbmb1
I just really wanna know if my phone will go back to all this after the downgrade?
(Forgive me for sounding like such a noob, I haven't dabbled in android development since my first EVO years ago)
Hi guysI've Just gotten my galaxy note and I can't seem to find the dialer codes that are used to check phone information.
Back then it was*#*#4636#*#*Or something like that, has anyone figured out what are the dialer codes for our galaxy note 2?
Sent from my GT-N7105 using xda app-developers app
Frostyeo said:
Hi guysI've Just gotten my galaxy note and I can't seem to find the dialer codes that are used to check phone information.
Back then it was*#*#4636#*#*Or something like that, has anyone figured out what are the dialer codes for our galaxy note 2?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Samsung secret codes: http://tricks-world110.blogspot.nl/2012/07/all-samsung-mobile-secret-codes.html.
Tried it out but doesn't really work, anyone else tried? Must I be rooted?
Sent from my GT-N7105 using xda app-developers app
Frostyeo said:
Tried it out but doesn't really work, anyone else tried? Must I be rooted?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Hello sir,
You doesn't need to root your device for some code to run successfully,
Try this few code as I used it before this to check my faulty device :
#*0*# - To run some test on your device.
#*0011# - To run Service Mode. There's an option to Turn Off the Wifi Power Saver Mode
*#1234# - To check your device Version of Android.
Hope this can help sir as this is a few notable code that I used to check on device before this.
zulljoe88 said:
Hello sir,
You doesn't need to root your device for some code to run successfully,
Try this few code as I used it before this to check my faulty device :
#*0*# - To run some test on your device.
#*0011# - To run Service Mode. There's an option to Turn Off the Wifi Power Saver Mode
*#1234# - To check your device Version of Android.
Hope this can help sir as this is a few notable code that I used to check on device before this.
Click to expand...
Click to collapse
Actually, for me I have to use:
*#0*#
and
*#0011#
Typos?
No eeffing Codes work for me!!!
gicarey said:
Actually, for me I have to use:
*#0*#
and
*#0011#
Typos?
Click to expand...
Click to collapse
I've tried so many codes from "Samsung secret codes" and also this site but nothing i get message saying " connection problem or invalid MMI code" i have the GT-N7105, running cm 10.1, with twrp recovery, Please help!! I've so many different service mode codes but nothing works am i doing something wrong ?
#Gizm0# said:
I've tried so many codes from "Samsung secret codes" and also this site but nothing i get message saying " connection problem or invalid MMI code" i have the GT-N7105, running cm 10.1, with twrp recovery, Please help!! I've so many different service mode codes but nothing works am i doing something wrong ?
Click to expand...
Click to collapse
Codes for Sammy and AOSP based roms are different.
On CM10.1 *#*#4636#*#* (or something similar) will work. On Sammy based it won't.
note 2
DubelBoom said:
Codes for Sammy and AOSP based roms are different.
On CM10.1 *#*#4636#*#* (or something similar) will work. On Sammy based it won't.
Click to expand...
Click to collapse
Thank you very much for the response but that one I already know, the code that doesn't work is the one that everyone is using to unlock the phone and BTW I have the i1317m not GT-N7105 that was my noon mistake
#Gizm0# said:
I've tried so many codes from "Samsung secret codes" and also this site but nothing i get message saying " connection problem or invalid MMI code" i have the GT-N7105, running cm 10.1, with twrp recovery, Please help!! I've so many different service mode codes but nothing works am i doing something wrong ?
Click to expand...
Click to collapse
+1. I get the same error across multiple ROMs on my GT-N7100 (all touchwiz based)
Anyone?
Hmmmm....
I thought that AOSP was the official Samsung/Android ROM.
You learn something every day.
thank you
Sent from my GT-N7100 using XDA Premium 4 mobile app
Note 2
gicarey said:
Actually, for me I have to use:
*#0*#
and
*#0011#
Typos?
Click to expand...
Click to collapse
i get in to the menu but it says that umts is limited how do i fix that?
Has anyone figure out how to obtain the MSL for our phone?
Edit: Never mind. It's the same procedure as GS3
Can this be done on a non-rooted Note2?
Yes. You dont have to be rooted
Sent from my Galaxy Note 2
Yep, it worked, thanks.
K.0.0.L. said:
Has anyone figure out how to obtain the MSL for our phone?
Edit: Never mind. It's the same procedure as GS3
Click to expand...
Click to collapse
Care to post a link?
Sent from my SPH-L900 using Tapatalk 2
spiicytuna said:
Care to post a link?
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
here it go http://www.youtube.com/watch?v=CWb8ootppo0
I didn't watch the video, but the fastest way to get your MSL is to ##DATA# > Edit > Enter 000000 or any 6 digits aka fail, then open terminal emulator, Type "su", then Type getprop ril.MSL
Jocelyn said:
I didn't watch the video, but the fastest way to get your MSL is to ##DATA# > Edit > Enter 000000 or any 6 digits aka fail, then open terminal emulator, Type "su", then Type getprop ril.MSL
Click to expand...
Click to collapse
Get this from the market. It works great and is FREE!! You do not have to be rooted to use it either.
https://play.google.com/store/search?q=getmymsl
nextelfixer said:
Get this from the market. It works great and is FREE!! You do not have to be rooted to use it either.
https://play.google.com/store/search?q=getmymsl
Click to expand...
Click to collapse
Doesn't work for me
Sent from my SPH-L900 using xda app-developers app
00mred00 said:
Doesn't work for me
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Before you use this app, make sure that you do a ##data#. put in any 6 digits ex. (000000) and the phone will show that it was incorrect. NOW, go to Get My MSL and it will work.
Hope this helped.
K.0.0.L. said:
here it go http://www.youtube.com/watch?v=CWb8ootppo0
Click to expand...
Click to collapse
Did you try clearing out that data>others>multimedia fields as done in the video? Just wondering if you saw any speed increases or overall improvements.
---------- Post added at 09:14 PM ---------- Previous post was at 08:35 PM ----------
wildta said:
Did you try clearing out that data>others>multimedia fields as done in the video? Just wondering if you saw any speed increases or overall improvements.
Click to expand...
Click to collapse
My speedtest results are mixed after this CDMA hack.
For some reason Group Play on my note 2 with MK4 doesn't have "Share Videos" or "Share Music" options, any idea as to why? Thanks in advance!
This is what I see
louforgiveno said:
This is what I see
Click to expand...
Click to collapse
same here
louforgiveno said:
This is what I see
Click to expand...
Click to collapse
This is what I see, but my friend who has an S4 also sees a "Share Video" option
Any solutions to this?
santoosh said:
Any solutions to this?
Click to expand...
Click to collapse
Your answer will be found here
http://forum.xda-developers.com/showthread.php?t=2564663
Wassup guys,
I've been having a problem with my N7100 for a while, and i wanted to fix it.
So i googled the solution and found a fix, but the problem is that the fix requires to open the engineer mode, and its not opening when i dial the different codes.
Nothing is working as i have tried flashing several ROMs with no solution.
I am currently running rooted stock 4.4.2.
Cheers
You mean developer options. Go to settings - more - about device and tap on buildnumber 7 times.
Androidwizzard said:
You mean developer options. Go to settings - more - about device and tap on buildnumber 7 times.
Click to expand...
Click to collapse
I've had it on since i got the rom. Any other ideas?
GamerSam32 said:
I've had it on since i got the rom. Any other ideas?
Click to expand...
Click to collapse
Ah understood: you are searching for Samsung's secret codes like *#0*# dialer codes for calibration eg
LINK
Androidwizzard said:
Ah understood: you are searching for Samsung's secret codes like *#0*# dialer codes for calibration eg
LINK
Click to expand...
Click to collapse
No bro, my problem is that when i dial the necessary codes the engineer mode is not opening.
GamerSam32 said:
No bro, my problem is that when i dial the necessary codes the engineer mode is not opening.
Click to expand...
Click to collapse
Which codes are you try to dialing?
Sent from my GT-N7100 using XDA Premium 4 mobile app
4.3 Since the codes have changed a lot *#*#...............#*#* o *#.......#* per code, you have to put more or less *#9900# o *#0011# funcionan y *#1234#
optimusPRIME said:
Which codes are you try to dialing?
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
*#7465625# or * # * # 3646633 # * # *
Sent from my GT-N7100 using XDA Free mobile app
GamerSam32 said:
*#7465625# or * # * # 3646633 # * # *
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
I am getting this when dialed above code.
Now on stock 4.3, rooted.
Sent from my GT-N7100 using XDA Premium 4 mobile app
rimgoru said:
4.3 Since the codes have changed a lot *#*#...............#*#* o *#.......#* per code, you have to put more or less *#9900# o *#0011# funcionan y *#1234#
Click to expand...
Click to collapse
Thanks for the help but can you talk in English please?
Sent from my GT-N7100 using XDA Free mobile app
GamerSam32 said:
Thanks for the help but can you talk in English please?
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you , can you describe me how can i do this?
Above codes are not working on kitkat.look for alternative codes.
how to get engineering mode on note 2 exynous processor?