Original ROM for my country (Thailand)
has 2 digit FM radio
(ie 98.75 MHz , 102.15 MHz , 88.65MHz ...)
after playing around 10 or more custom ROM here
none of those ROM has 2 digit FM radio
(i need to set it as 98.7 MHz or 98.8 MHz for 98.75 MHz station)
i try by insert fmradio.apk into some custom ROM but it does not work
(i think it is more than fmradio.apk itself to make 2 digit FM radio)
All suggestion is welcome
Thank you in advance :silly:
U may try install 'tunein' on playstore
It is a radio app
But it using ur data to lauch
Sent from my GT-N7100 using xda app-developers app
ps000000 said:
Original ROM for my country (Thailand)
has 2 digit FM radio
(ie 98.75 MHz , 102.15 MHz , 88.65MHz ...)
after playing around 10 or more custom ROM here
none of those ROM has 2 digit FM radio
(i need to set it as 98.7 MHz or 98.8 MHz for 98.75 MHz station)
i try by insert fmradio.apk into some custom ROM but it does not work
(i think it is more than fmradio.apk itself to make 2 digit FM radio)
All suggestion is welcome
Thank you in advance :silly:
Click to expand...
Click to collapse
It may be something to do with the CSC, ask around in this thread http://forum.xda-developers.com/showthread.php?t=2033894
Thank you man
i got something that work by local Modder
just a csc relate issue !!!
(without a touch of fmradio.apk)
ps000000 said:
Thank you man
i got something that work by local Modder
just a csc relate issue !!!
(without a touch of fmradio.apk)
Click to expand...
Click to collapse
Hi,
I'm a noon, but comfortable installing custom Roms. I wanted to get FM radio enabled on my wife's note 2 after liquid smooth ROM. Do you have step by step instructions on how to get FM working. Would highly appreciate if you could help.
Thanks
Gaurav
Related
hi everyone
i want original rom for pw10b1. i ve installed special edition rom v1.1 but signals are not coming as it shows pw10a1 in device information and also gives me error while upgrading radio stack to 6.24.20. it is urgent plz
Installing special edition rom should not affect signal as it doesnt address the radio stack. Have you looked in bootloader to make sure 900/1800 is chosen in gsm.
Push reset button while holding power button, then push button below antenna, choose from there. Was the signal ok before installing the rom?
Thank u very much
That band selection process was in the bootloader and i didn know it. i selected the band from there and signals are alright now. Thank u once again for such a kind help
I have a US version of the diamond but the signal isn't really good. I have radio ver. 1.00.25.08 and rom ver:1.93.442.4WWE. Should I change the radio ver?? if so, which one should I get?
I think it's better first go into Phone / menu / options /band and there deselect "auto" option and select your type of network ( like GSM ). For me it worked. All the best
radio
only way to find whats best for you is to flash and try other radios.
good luck
here in greece i have the same problem! signal on my diamond 2 is weak......
hope a new radio rom comes out,....
kostas ntinos said:
here in greece i have the same problem! signal on my diamond 2 is weak......
hope a new radio rom comes out,....
Click to expand...
Click to collapse
Which Rom and Radio version do you use?
liamhere said:
only way to find whats best for you is to flash and try other radios.
good luck
Click to expand...
Click to collapse
Totally agree, it's the only way to go.
albumihai2004 said:
I think it's better first go into Phone / menu / options /band and there deselect "auto" option and select your type of network ( like GSM ). For me it worked. All the best
Click to expand...
Click to collapse
awesome just changed to GSM instead of auto and wallah ive gone from 1 bar to full strength signal
I have tried flashing rom and changing radio and that didnt work but this sorted it straight away
Many thanks Ash
thats interesting... changing to GSM is not making a difference in India....
i guess the service providers r f###ed up!!
i just flashed one of the tmobile touchpro 2 roms ...but i dont now were to find it on my phone
1milenia said:
i just flashed one of the tmobile touchpro 2 roms ...but i dont now were to find it on my phone
Click to expand...
Click to collapse
go to start -> settings -> system -> device info
see if your radio is updated or not
yes its there ..but how do i play the radio theres no icons
1milenia said:
yes its there ..but how do i play the radio theres no icons
Click to expand...
Click to collapse
When refering to radio rom it means the RADIO that is used for signal and batt life is built into the rom. there is a program for FM radio in the threads. If you search for it you ill find it
Baby steps...
thanks so much for clearing that up...are you saying it streghthens the signal for my phone..can you explain more
Read THIS thread and it will answer your questions far better then I.
one good thing came out of this ...i learned how to flash a rom
i have a h is that what im supposed to have any pros/cons to that
H - for High-Speed Downlink Packet Access (HSDPA) = good: http://en.wikipedia.org/wiki/High-Speed_Downlink_Packet_Access
what's different from DHD radio 12.54.60.25U_26.09.04.11_M2 and 12.54.60.25P_26.09.04.11_M2 , which is better?
online waiting reply
lingtong_z said:
what's different from DHD radio 12.54.60.25U_26.09.04.11_M2 and 12.54.60.25P_26.09.04.11_M2 , which is better?
Click to expand...
Click to collapse
The 'U' version of the radio has hsxpa (hsdpa+) enabled as the default whilst the 'P' version has hsdpa enabled.
Hsdpa+ is an enhanced data protocal offering higher data speeds but is not yet available widely.
If your carrier/country does not have hsdpa+ then the 'U' or 'P' radios will work excatly the same.
But what does the M2 mean? Seen it on a few radio links.
I's probably a stupid question, but here it goes :
My radio is : 12.54.60.25U_26.09.04.11_M2, recommended radio for the rom i use (Revolution HD) is 12.54.60.25_26.09.04.11_M2 (No U).
Is it the same ?
nicoboum said:
I's probably a stupid question, but here it goes :
My radio is : 12.54.60.25U_26.09.04.11_M2, recommended radio for the rom i use (Revolution HD) is 12.54.60.25_26.09.04.11_M2 (No U).
Is it the same ?
Click to expand...
Click to collapse
very good question.. i was going to ask it but did a search and as this topic is the closest topic to the question .. bump for the both of us .. just wanting to make sure before iflash Revoluion HD if i should Flash radio or not..
i am waiting for this answer too.
The answer...
I have now been searching all over the web, reading lots of posts on this.
And now I think I know enough to share the secrets of it all
First the radio image (f.ex. 12.54.60.25_26.09.04.11_M2) is the only one of this version. It will show a P or U in the first part, depending on settings in the build.prop file, on the phone (build.prop lies in the /system folder).
The setting controlling this is called ro.ril.hsxpa. It is set to a number, which can be hard to figure out what means.
Mine was set to 3 as default and that gave me a P in the radio version. I haven't found out what 3 means, I could only find this info:
ro.ril.hsxpa=0 - UMTS r99
ro.ril.hsxpa=1 - HSDPA
ro.ril.hsxpa=2 - HSDPA/HSUPA
I changed it to 2 and rebooted and now I have a U in the radio version. I am not sure, but I think my 3G speed went up a bit. It is now fairly stable at 4.5mbit down / 1.2mbit up.
(Probably just my imagination )
By the way, the setting called ro.ril.hsdpa.category also affects the 3G speed.
Theres a lot of info on this here: http://forum.xda-developers.com/showthread.php?t=982082
Hope this helps some people, as it would have helped me when I was chasing the special U version of the radio, a couple of days ago
Edit: Apparently the speedtest application cannot show any higher than 4.5 in download. Going to their webpage I get up to 7.6 mbit down :-O
Yeah... I have tried with P mode and speedtest have had problems in testing... In U mode, the speedtest works very well...
In Europe, the correct mode is "U"
Good post co2-guy
sorry but I don't think I understand properly, what you say is that I flash this radio and the letter U or P will appear on the phone, depending on my system and network configuration?
or
Do I have to hunt for proper radio package for my network? (with P or U)
Sorry to ask a silly question
Hi everyone,
I'm aware that my question isn't raised in the right place, but I have found nowhere to my problem.
I'm using leedroid rom and it's very nice of him to produce such an excellent rom.
After flashing rom, I continued to flash "radio 12.54.60.25_26.09.04.11_M2" as he recommended.
This is the message I received in command line window
"sending 'radio' (24960 KB)... OKAY [ 4.219s]
writing 'radio'... FAILED (remote: not allowed)"
I just wondered how to flash this radio version.
Please help!
i'm using 12.54.60.25P_26.09.04.11_M2, it very good
lethao1980 said:
Hi everyone,
I'm aware that my question isn't raised in the right place, but I have found nowhere to my problem.
I'm using leedroid rom and it's very nice of him to produce such an excellent rom.
After flashing rom, I continued to flash "radio 12.54.60.25_26.09.04.11_M2" as he recommended.
This is the message I received in command line window
"sending 'radio' (24960 KB)... OKAY [ 4.219s]
writing 'radio'... FAILED (remote: not allowed)"
I just wondered how to flash this radio version.
Please help!
Click to expand...
Click to collapse
you have to do the two work simultaneously: eng S-Off and Ship S-Off
have fun!
rider5512 said:
The 'U' version of the radio has hsxpa (hsdpa+) enabled as the default whilst the 'P' version has hsdpa enabled.
Hsdpa+ is an enhanced data protocal offering higher data speeds but is not yet available widely.
If your carrier/country does not have hsdpa+ then the 'U' or 'P' radios will work excatly the same.
Click to expand...
Click to collapse
Wether HSPA (hsdpa/hsupa) works (identified as hsxpa) or not is solely controlled by the build.prop
the U and P simply is a marker for what is enabled..
you can flash the "P" radio, but it will show up as U (or others) after the flash if the build.prop enables use of both downlink and uplink high speed packet access.
@Co2-guy
Change the values found in your build prop to:
ro.ril.hsdpa.category = 10
ro.ril.hsupa.category = 6
remove any other entries of it (before the # begin build properties comment)
and change them under the # ace RF team request comment
(Reference the build.prop from my rom as an example, I've cleaned it up and my speeds are phenomenal: http://dcom.me/cX1ec)
you'll have slightly faster speeds that you're getting now.
balinh_bs said:
i'm using 12.54.60.25P_26.09.04.11_M2, it very good
Click to expand...
Click to collapse
Try the higher radio build from the Telus 2.43.661.1 build.
JSLEnterprises said:
Try the higher radio build from the Telus 2.43.661.1 build.
Click to expand...
Click to collapse
This radio have any improved on battery live or signal?
well, my dhd Is currently locked to it and 2.43.661.1 (because thats what they returned it to me from repair with)
but from what I remember before hand when the phone was running Radio_12.54.60.25_26.09.04.11_M2, signal strength has improved from that one, same with wifi, battery is about the same though.
Hello,
How can I localise the radio chipset on the bord ?
best regards
If you mean radio (gsm), it's located in Qualcomm SoC (processor, radio, etc... in one chipset).
Why do you need location?
What is problem?
Hello,
T thought that it was a separated chipset
I can't make a call
When I dial a number, it opens the screen calls it "call in progress" then 2 seconds after it cut "End Call".
However, the 3G connection works.
Best regards
Did you try to change settings?
http://androidforums.com/desire-hd-support-troubleshooting/296826-htc-desire-hd-call-problem.html
http://androidforums.com/htc-desire/155297-cant-send-recieve-calls-texts.html
Hello,
Yes I tried every things in sittings menu, I tried another reader SIM card, The same SIM card works correctly with another DHD, I tried a custom ROM, I tried another flex cable.
NO changes
Did you try to turn off wlan and try it again?
Or to turn off 3g?
If you use custom rom you don't now nothing because they can have a problems for some devices.
The best rom for testing is the latest stock shiped wwe ROM installed from ruu (not from hboot).
You can download it from here:
http://shipped-roms.com/index.php?category=android&model=Ace
Hello,
I do flashing the RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe,
before doing a custom rom install.
I do several tests without 3G nor wifi.
I tested the *#*#4636#*#* : phone information to fix GSM only.
I am in test with a stock rooted rom (DHD_WWE_3.12.405.1_STOCK_rooted_by_nitr00.zip), I have all time the same result : no calls in or out possible
Thanx
Did you try this?
http://ma.juii.net/blog/manual-htc-desire-hd
TF85 said:
Hello,
How can I localise the radio chipset on the bord ?
best regards
Click to expand...
Click to collapse
Unsupported bands? Mine worked in all of the places I've been in Europe.
Just to make sure try a different SIM ( with different network - preferably 2G sim as most 3G cause haywire. )
If not then flash a radio FOR WWE as it may be outdated.
Sent from my HTC One using Tapatalk
XDA_h3n said:
Unsupported bands? Mine worked in all of the places I've been in Europe.
Just to make sure try a different SIM ( with different network - preferably 2G sim as most 3G cause haywire. )
If not then flash a radio FOR WWE as it may be outdated.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
I don't understand why people don't read the whole thread. It's just 8 short posts.
This turns out that you write something just because you have to.
But you aren't the only one. And that's sad.
Gussta said:
I don't understand why people don't read the whole thread. It's just 8 short posts.
This turns out that you write something just because you have to.
But you aren't the only one. And that's sad.
Click to expand...
Click to collapse
Well, to be honest tapatalk sends me to the first unread post; therefore I couldn't read the post that you flashed a WWE RUU.
However, I'd think you should flash a radio specific to your region as their could be difference to the WWE. But I don't know if this would work as they're device dependent? But it's worth a shot.
Though, accordingly to your posts you've tried many software troubleshooting and checking the flex cable. I wouldn't know anything else...