I received my MOGA gamepad for Android. I have put fresh batteries in twice (the gamepad), reset my phone twice (android 4.1.1 Stock Samsung Galaxy Note 2, International). I can get the Gamepad to power on, blue light flashing but my phone will not find the pad. I have tried to do it manually also via settings, Bluetooth, scan. I have other BT device that my phone has found and pairs with fine. I have turned all them off and unpaired them. The pad, as I said, blinks blue for pairing but my phone can not find it. Any advice would be of course appreciated!
are you using the moga pivot app? the gamepad only works with moga pivot app and certain games. u can download a universal driver but its not perfect for non sanctioned games.
Yes I tried to use the app. When that didn't work I tried to do it manually. The pad blinks blue but will not sync. My other BT devices are working fine...perhaps a bad controller? I am going to try it on my wife's GSIII when she gets home later today from work.
gandalf21502 said:
Yes I tried to use the app. When that didn't work I tried to do it manually. The pad blinks blue but will not sync. My other BT devices are working fine...perhaps a bad controller? I am going to try it on my wife's GSIII when she gets home later today from work.
Click to expand...
Click to collapse
Gotta do it through the app. It may take awhile the first time.
Sent from my GT-N7100 using xda premium
I have tried it several times via the app, and waited until it said device could not sync....
I am having the same problem with my sprint gs3 stock. It looks like it is a OS proble from all the threads I have read. But I suspect some moga's are defective. Damn flashing blue light.
Sent from my SPH-L710 using xda premium
Yes...the FOREVER flashing blue light. O/S issue? How so? I am tending towards a hardware issue with the pad. I have not been able to test it on my wifes phone yet, she is stuck at work...LOTS of SNOW coming down...
It might be a hardware issue. Nexus users do not seem to be having a problem. But I did see that a lot to f people with galaxy phones have Bluetooth issues with some devices. It is either one of those problems.
Sent from my SPH-L710 using xda premium
Do you have any links to forums discussing this? I am going more with a hardware issue. I have several BT devices hooked to my N2 (keyboard, mouse, headset, speaker) and all work fine. I emailed MOGA about the issue, have not heard back from them yet.
Well I tried it on my wifes phone this morning via the app and manually...neither way would sync. She has a GSIII (stock). I have not heard back from them via email...guess I will have to try and call them...
gandalf21502 said:
Well I tried it on my wifes phone this morning via the app and manually...neither way would sync. She has a GSIII (stock). I have not heard back from them via email...guess I will have to try and call them...
Click to expand...
Click to collapse
I am going to call today as well. Seems to me it is the pad. Best bet is to assume it is the moga considering it is new technology from a unproven company in my opinion.
Sent from my SPH-L710 using xda premium
---------- Post added at 12:08 PM ---------- Previous post was at 11:41 AM ----------
gandalf21502 said:
Well I tried it on my wifes phone this morning via the app and manually...neither way would sync. She has a GSIII (stock). I have not heard back from them via email...guess I will have to try and call them...
Click to expand...
Click to collapse
Also, I called and they said I will need to Email customer service. They said response time will be between 24 & 72 hrs. Ughhh.
Sent from my SPH-L710 using xda premium
Well I tried it on a Nexus 7...no go..same issue...fyi.
So when you call they tell you to email...lovely. I emailed them 2 days ago and have not heard back from them. I also posted on there FB page as to what my issue was...no response as of yet.
Update: I finally received an email from MOGA...they sent me a FedEx return label...time for an exchange....
Related
Anyone having bluetooth disconnections after upgrade to JB ?
wtf2012 said:
No.
Click to expand...
Click to collapse
lol, thanks. Actually i was hoping an answer from anyone having problems.
I was having them quite often, figured out it was only when I had DSP manager or Awesome beats installed AND set to modify the bluetooth sound. Not sure if this is your case or not but thought I would chime in. To fix I just unchecked ALL options under bluetooth then unpaired. (Turn off BT go into BT on phone, unpair, turn BT on phone off, reboot phone) then I repaired and no more disconnects.
G-Nexus Sent
I've been having this problem with my Sony head unit and GN. It takes a couple tries for a2dp to connect and will randomly disconnect. Happened on ICS too.
Stock rooted.
Sent from my Galaxy Nexus using Tapatalk 2
ifly4vamerica said:
I was having them quite often, figured out it was only when I had DSP manager or Awesome beats installed AND set to modify the bluetooth sound. Not sure if this is your case or not but thought I would chime in. To fix I just unchecked ALL options under bluetooth then unpaired. (Turn off BT go into BT on phone, unpair, turn BT on phone off, reboot phone) then I repaired and no more disconnects.
G-Nexus Sent
Click to expand...
Click to collapse
Well , i dont use any of those applications :/
s9ortner said:
I've been having this problem with my Sony head unit and GN. It takes a couple tries for a2dp to connect and will randomly disconnect. Happened on ICS too.
Stock rooted.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I got lots of disconnections from my car audio system.
My heart rate monitor and nokia head set disconnects too much. Over 5 times in one hour.
My wife's GN also disconnects from her Kenwood head unit. Far less frequently than mine, but it happens. I'm surprised more people haven't chimed in on this issue. My dad just got his GN yesterday so I'll check his tonight to see if it too suffers from this problem.
Sent from my Galaxy Nexus using Tapatalk 2
s9ortner said:
My wife's GN also disconnects from her Kenwood head unit. Far less frequently than mine, but it happens. I'm surprised more people haven't chimed in on this issue. My dad just got his GN yesterday so I'll check his tonight to see if it too suffers from this problem.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
at least i am not the only one with problems. Since i never tested bluetooth in stock ICS i thought it could be some hardware problem. But apparently other people have too ...
I had no such issues. I use it with a Plantronic 925 and a Gear4 BT stereo speaker, none if them working differently than they did on ICS.
Sent from my Galaxy Nexus using xda app-developers app
I haven't had problems with Bluetooth audio. When I use Bluetooth File Transfer between my Xoom and Gnex, I can view my Xoom's file system from my GNex. When I try to view my Gnex file system, I get a an error message saying the Nexus does not support OBEX FTP, which it should. Not a big deal but it is a nuisance.
RobBull69 said:
I haven't had problems with Bluetooth audio. When I use Bluetooth File Transfer between my Xoom and Gnex, I can view my Xoom's file system from my GNex. When I try to view my Gnex file system, I get a an error message saying the Nexus does not support OBEX FTP, which it should. Not a big deal but it is a nuisance.
Click to expand...
Click to collapse
I am gonna test this !
i notice Bluetooth issues when connected to my motorcycle helmet.
using stock or other custom roms it will start to cut out or skip when i put the phone in my pocket and at highway speed it loses connection completely.
when using cm10 "official not the kangs" it has no issue whatsoever and the connection distance is improved 20x. i can have the phone 20 meters away and it still stays connected and even at highway speeds.
Sent from my Galaxy Nexus
sorry my question , but what is cm10 ?
salatiel said:
sorry my question , but what is cm10 ?
Click to expand...
Click to collapse
CM10 = Cyanogenmod Version 10. It is the first Jelly Bean Rom from Cyanogenmod. There are many threads on the topic but you can also find information on their site.
The official nightly releases of this version has just been released for the VZW and Sprint Galaxy Nexus as well as other devices.
mmouse03 said:
CM10 = Cyanogenmod Version 10. It is the first Jelly Bean Rom from Cyanogenmod. There are many threads on the topic but you can also find information on their site.
The official nightly releases of this version has just been released for the VZW and Sprint Galaxy Nexus as well as other devices.
Click to expand...
Click to collapse
i will check if there is a maguro version available to see if thet fixed the bluetooth problems...
Hello,
I received my Samsung AllShare Cast Wireless Hub last night and have been trying to spend all day getting it and my Sprint SG S III to connect, and I have not succeeded.
I have tried using the custom rom I use (Team Sonic JB) and also going back to full stock rom and stock recovery and also using the triangle remove to reset everything and I have not succeeded.
My phone each and every time see's the Samsung Wireless Hub (Dongle) and every time I try to connect to it, the phone message says's The AllShare Cast failed to connect.
Samsung support for this is not available until Monday so I wanted to ask here in case anyone might have some advice for me to try and fix this.
I also noticed that when I try to register this product, 1: The number it asks me for to register is not on this device (HEX/IMEI) like there is on the phone. 2: The model # on the device itself, when I type it into Samsung website, pulls up nothing. When I search for the device by name, I find it, but it has a totally different model #.
So I am looking for any and all help out there. I ordered this because of the Samsung %50 discount when I registered my SG S III phone but I am not happy atm since it is not working for me.
Thank you,
Whiteice
are you holding down the reset button until the light turns blue? If not it will fail every time. I run a stock rom and mine works.
As far as registration I have been trying to figure that out myself.
Yes I hold it down until it turns blue. Then once I let it go it starts to flash red.
Sent from my SPH-L710 using Tapatalk 2
Tidbits said:
are you holding down the reset button until the light turns blue? If not it will fail every time. I run a stock rom and mine works.
As far as registration I have been trying to figure that out myself.
Click to expand...
Click to collapse
So i just got off the phone with Samsung. RMA my unit.
The girl said they need to look into it because accessories are not allowed or eligible to register. Doesnt make sense to me.
I know the 3 support reps are doing there best but i really felt like they just disnt have a clue.
Whiteice
Sent from my SPH-L710 using Tapatalk 2
Mine works fine on the 3 and note 2. It may be defective. It should work first try.
Sent from my SGH-T889 using Tapatalk 2
I had to use triangle away to get mine to work. I was stuck at the black connecting screen.
after using the app, it has worked ever since with no problem.
abeggs said:
I had to use triangle away to get mine to work. I was stuck at the black connecting screen.
after using the app, it has worked ever since with no problem.
Click to expand...
Click to collapse
What rom are you using. I have tried several now without any luck and yes I used the triangle away app to reset everything.
Sent from my SPH-L710 using xda app-developers app
abeggs said:
I had to use triangle away to get mine to work. I was stuck at the black connecting screen.
after using the app, it has worked ever since with no problem.
Click to expand...
Click to collapse
I am using a custom roms on T-mobile's version Note 2 & S3 and both work as they should... You must have a bad unit for sure.... Once you get a replacement please report back? And I have never had to use Triangle Away to get mine to work and I have custom recovery and the works!
shojus said:
I am using a custom roms on T-mobile's version Note 2 & S3 and both work as they should... You must have a bad unit for sure.... Once you get a replacement please report back? And I have never had to use Triangle Away to get mine to work and I have custom recovery and the works!
Click to expand...
Click to collapse
Will do.
My RMA is due to be received by Samsung tomorrow. I hope to have my replacement by weeks end.
WhiteiceDMSTech said:
Will do.
My RMA is due to be received by Samsung tomorrow. I hope to have my replacement by weeks end.
Click to expand...
Click to collapse
I received my RMA unit and I am having the same issue. It fails to connect.
I am running Team Sonic SG3 rom and have Triangle Away running.
Not sure what else to do at this point.
Whiteice
Make sure when you are trying to connect you have the hub light solid blue. Use the reset button until it is solid blue.
Sent from my SGH-T889 using Tapatalk 2
Tidbits said:
Make sure when you are trying to connect you have the hub light solid blue. Use the reset button until it is solid blue.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the suggestion.
Tried this and still fails to connect.
Just wondering, is there any particular baseband/modem I should be running for this to sync?
I am on LJ7 with the TW Roms.
Thank you,
Whiteice
There's a firmware update on the phone today. You may want to check it out.
Sent from my SGH-T889 using Tapatalk 2
Running Team Sonic Free GS3 and it does not work for me either.
Got AllShare Hub to Connect to My App Radio with Gallaxy S3
WhiteiceDMSTech said:
I received my RMA unit and I am having the same issue. It fails to connect.
I am running Team Sonic SG3 rom and have Triangle Away running.
Not sure what else to do at this point.
Whiteice
Click to expand...
Click to collapse
I finally got mine to work.
Connected from my 3S SCH-I535 (Verison)
Used [Root] Triangle to reset the counter number to 0
Connected to the AllShare Hub
Received a reject connection msg
Unable to reconnect. Msg said "Connection Failed"
Tried to connect by holding the reset button till it turned red, same failed msg every time.
Called Samsung - THEY DON'T HAVE A CLUE WHAT THEIR DOING.
Finally just pressed and released the reset button, which turned the blinking red light to blue.
It connected.. and worked
Next time I connected it was back to the rejected connection message.
Found that if I have the display on during connection, it worked (mostly).
I'm using this hub in my car to connect to my Pioneer AVH-X8500BHS with App Radio. I wish there was a seemly way to connenct as I have to do a lot before I go anywhere
Change radio to the App mode
Say OK to several warning screens.
Use my phone to launch AllShare app and connect to hub.
Run the ARLiberator app and connect to the radio.
After all the connection are complete, I can drive off.
I had a Verizon note 2 and it would read text messages from my phone. I just changed to t mobile and I connected my phone to my car. I thought all would be fine since its the same type phone. I can't figure out why its not working. I have unsynced and resynced my phone several times. All of the times I have allowed my phone too map. Can someone please help.
Sent from my SGH-T889 using Tapatalk 2
stang9779 said:
I had a Verizon note 2 and it would read text messages from my phone. I just changed to t mobile and I connected my phone to my car. I thought all would be fine since its the same type phone. I can't figure out why its not working. I have unsynced and resynced my phone several times. All of the times I have allowed my phone too map. Can someone please help.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Its tmo service which is causing the issue. They dont allow devices to access their network through phones.
I have an acura with acuralink, been researching for literally a year to get this stupid acura link to work and i cant figure it out. Another guy on the acura forums has a verizon phone he said it synced up without him trying to.
Sent from my SGH-T889 using XDA Premium HD app
Would I need to change roms then?
Sent from my SGH-T889 using Tapatalk 2
Jedi x12 had an option for bluetooth tethering, idk if that wluld help u. Im on jedi master right now. Might flash a cm rom to test it out, dont know when thou.
I personally don't think its a rom or phone issue, its on tmo's side. But give it a shot, might work for ur needs. Lemme know what happens, its a step in the right direction
Sent from my SGH-T889 using XDA Premium HD app
When I had the Verizon phone with hacked APN my SMS Sync read out worked. I changed phone because if I wasn't on wifi Google play, email, and some sites wouldn't work. Plus I didn't have a frequency that T Mobile uses.
Sent from my SGH-T889 using Tapatalk 2
stang9779 said:
I had a Verizon note 2 and it would read text messages from my phone. I just changed to t mobile and I connected my phone to my car. I thought all would be fine since its the same type phone. I can't figure out why its not working. I have unsynced and resynced my phone several times. All of the times I have allowed my phone too map. Can someone please help.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
My T-Mobile Note 2 is working fine with Ford MyTouch Sync... SMS messages come through just fine. Have you updated to the latest firmware for your car? Another thing to try is to power cycle the car... delete your phone from the car, delete Sync from the phone, power cycle the phone, and pull the car's battery cable for a minute.
rcobourn said:
My T-Mobile Note 2 is working fine with Ford MyTouch Sync... SMS messages come through just fine. Have you updated to the latest firmware for your car? Another thing to try is to power cycle the car... delete your phone from the car, delete Sync from the phone, power cycle the phone, and pull the car's battery cable for a minute.
Click to expand...
Click to collapse
I have deleted the phone and car multiple times. I haven't tired to disconnect the cars battery. My cars firmware is up to date according to syncmyride.com. Thanks for the idea. What kind of a car so you have? Mines is a 2014 C Max.
Sent from my SGH-T889 using Tapatalk 2
It works now. My sync rebooted on its own and it started to work.
Sent from my SGH-T889 using Tapatalk 2
In the beginning, before it started working, what did it say on the Sync display? Mine says "feature not available". Thanks.
bellator7 said:
In the beginning, before it started working, what did it say on the Sync display? Mine says "feature not available". Thanks.
Click to expand...
Click to collapse
It just didn't work. Everytime I got a text my phone would give the alert noise. It's like my phone would think that somebody had already read the text message. So when I picked the phone up I didn't even know that I had received a reply because I had the radio on and couldn't hear the phone. So its like the radio was trying to get the text but couldn't all the way. I would check and neither device would say I had a text. The phone would have the text but would say that I already read it. My Sync system wouldn't even receive it.
When I started the car up the other day I heard music but the display was all black. The first text I received after that it started alerting me and giving me the option to read them. So my issue fixed is self.
Ido believe that unplugging the battery may have fixed this issue. That is as long as the regular old school car battery was the one that powered this device. As my car is hybrid.
Sent from my SGH-T889 using Tapatalk 2
stang9779 said:
It just didn't work. Everytime I got a text my phone would give the alert noise. It's like my phone would think that somebody had already read the text message. So when I picked the phone up I didn't even know that I had received a reply because I had the radio on and couldn't hear the phone. So its like the radio was trying to get the text but couldn't all the way. I would check and neither device would say I had a text. The phone would have the text but would say that I already read it. My Sync system wouldn't even receive it.
When I started the car up the other day I heard music but the display was all black. The first text I received after that it started alerting me and giving me the option to read them. So my issue fixed is self.
Ido believe that unplugging the battery may have fixed this issue. That is as long as the regular old school car battery was the one that powered this device. As my car is hybrid.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the info.
This seems to be a well documented issue in other device forums, but I was wondering if anyone here figured out how to handle it.
I just switched from Verizon with a note 2, to tmobile with a note 3. I drive a 2012 Subaru STi that has bluetooth connectivity. With my note 2 everytime i got into my car, the phone auto connected no problem.
With the note 3, I have to use the car's menu to select the phone and manually connect... every time i get in the car. From what I can ttell this is an issue with 4.3 android, and was wondering if anyone has found a way to fix it without rooting.
Thanks,
Derek
When you paired the Note3 initially, did you grant full access in the phone? I go through this with almost every android phone I pair after installation of a new head unit. As long as you check the box for remember choice for all and hit OK/Yes, everything works. The iPhone is the only device that seems to make this a fully automated thing.
On another note, the line out audio dock works flawlessly on the note 3 as well. I use it for all my tunes.
I have re paired the device multiple times and have not noticed a box to check for remember the decision. Someone said I need to establish the profiles ...but that only works when in the car and once I disconnect it resets. I had no issues with the note 2 the only change is the note 3. I'll try again and see if I get a box to check. There are no auto connect issues with my beats by dre wireless headphones or galaxy gear watch
Sent from my SM-N900T using XDA Premium 4 mobile app
I don't seem to get any option like you have mentioned
Sent from my SM-N900T using XDA Premium 4 mobile app
If you select the device in the Bluetooth device list on the phone, and press the settings icon, are all the boxes checked?
Yeah and the Un select as soon as I leave the car. What baffles me is that my headphones have no problem connecting. While this is not a deal breaker it really is frustrating me
Sent from my SM-N900T using XDA Premium 4 mobile app
Right now sitting in my living room they are unchecked. If I go turn my car on and select my phone from my car it connects instantly and both of those profile boxes will check themselves
Sent from my SM-N900T using XDA Premium 4 mobile app
Ok I guess I am going to throw in the towel on this. I have spent several hours trying to figure out why the hell this phone wont connect and my previous one did.
I found the profile settings under the bluetooth options, but those are always unchecked when not connected, and checked when connected.
I think I am just going to give up as no one seems to know why the note 3 fails at allow auto connect to some devices and the note 2 had no such problems.
drocksmash said:
Ok I guess I am going to throw in the towel on this. I have spent several hours trying to figure out why the hell this phone wont connect and my previous one did.
I found the profile settings under the bluetooth options, but those are always unchecked when not connected, and checked when connected.
I think I am just going to give up as no one seems to know why the note 3 fails at allow auto connect to some devices and the note 2 had no such problems.
Click to expand...
Click to collapse
Out of curiosity, what OS version were you running on the note2 when it was working as it should be? I wonder if the issue lies in the TouchWizzed 4.3 that is on the note3 as opposed to the 4.1.1/2 variety the note2 started with (I know they have 4.3 now, but perhaps they didn't when you had the device...?).
dwitherell said:
Out of curiosity, what OS version were you running on the note2 when it was working as it should be? I wonder if the issue lies in the TouchWizzed 4.3 that is on the note3 as opposed to the 4.1.1/2 variety the note2 started with (I know they have 4.3 now, but perhaps they didn't when you had the device...?).
Click to expand...
Click to collapse
Good question, I had not thought of that.
I had 4.1/2 originally but also used Beanz's 4.3 touchwiz so that my note2 worked with my galaxy gear.
So even a 4.3touchwiz on the note 2 had no problems.
Is anyone able to have their note 3 auto pair with their car? if it didnt work at all I would be able to move on and accept the loss, but for some reason my headphones auto pair in a flash. Hell I would rather the headphones not work and the car does!
drocksmash said:
Good question, I had not thought of that.
I had 4.1/2 originally but also used Beanz's 4.3 touchwiz so that my note2 worked with my galaxy gear.
So even a 4.3touchwiz on the note 2 had no problems.
Is anyone able to have their note 3 auto pair with their car? if it didnt work at all I would be able to move on and accept the loss, but for some reason my headphones auto pair in a flash. Hell I would rather the headphones not work and the car does!
Click to expand...
Click to collapse
While I don't get to use it often as it only resides in the wife's car (2012 Equinox), I have had no issues w/ bluetooth pairing/use. It's interesting the variability of outcome seen in regards to things like this (and I imagine rather frustrating as well) - I am regrettably at a loss.
Fair Enough. Thanks for trying guys I have given up!
Sent from my SM-N900T using XDA Premium 4 mobile app
Hey so how many people have the Bluetooth keyboard/Bluetooth mouse problem where the connection cuts off after a few seconds and you cannot type? Is this indicative of a bad unit or is it a problem with the firmware and an update should fix it? Tried logitech, some China brand and another off amazon. None work continuously. It just disconnects and then if you type something it connects soon after..so frustrating cause I need a keyboard
Sent from my SM-P600 using xda app-developers app
sameer1807 said:
Hey so how many people have the Bluetooth keyboard/Bluetooth mouse problem where the connection cuts off after a few seconds and you cannot type? Is this indicative of a bad unit or is it a problem with the firmware and an update should fix it? Tried logitech, some China brand and another off amazon. None work continuously. It just disconnects and then if you type something it connects soon after..so frustrating cause I need a keyboard
Click to expand...
Click to collapse
When the N10.1-14 first came out there were reports of the same issue you're describing. It seemed to have quieted down. It is a h/w issue because people who exchanged their devices and got new ones no longer had problems using the same previously problematic HID devices including the Logitech K810. I'm a pretty heavy BT user and (knock on wood) have never had an issue.
Yea I contacted Samsung for repair. Hopefully it will fix..I really don't want to go back to the iPad due to iOS..everything about this tablet Is so nice
Sent from my SGH-I337 using xda premium
sameer1807 said:
Yea I contacted Samsung for repair. Hopefully it will fix..I really don't want to go back to the iPad due to iOS..everything about this tablet Is so nice
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
Hope they can fix it for you. I use a Logitech K810 BT keyboard and a Jawbone Jambox BT speaker w/ my GN/2014. Never had a problem with either one disconnecting. Just in case Samsung doesn't fix it (they don't have the best track record), can you exchange it for another one?
Nope unfortunately I bought it back in January so I gotta get it fixed or I gotta sell it lol.
Sent from my SGH-I337 using xda premium
But seems like a lot are having luck with the Logitech 810.. May give that a try
Sent from my SGH-I337 using xda premium
I had the same problem with the k810 tried other keyboards as well. I also believe it probably is a h/w issue. I rooted mine am running Scotts rom-clean rom 2.0 r2. I installed a root enabled app called Bluetooth keyboard easy connect by Mike Van Den Sluis, and also found another root enabled app called Bluetooth keyboard bug fix by Felipe Porge. I also don't have Samsung keyboard installed I'm using Google keyboard. With those changes I have fixed the problem and am no longer having any problems, I'm not convinced that the bug fix app actually did anything but in following the instructions for the BT keyboard easy connect and also granting superuser permission the problem is solved. My only problem is with clean ROM none of my air commands are working, not sure if it's due to something I did or if they are just not enabled with clean ROM.
Guys,
It seems a software-solution might've been found. Check the BT Keyboard thread (14 pages long). (I do not know if re-posting is allowed or not...)
Regards,
Solyomszem
Sent with Tapatalk from SM-P600