cm 10.1 signal issue - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

I just flashed cm 10.1 did a full wipe. It looks good only problem is after initial boot up I get no cell signal. Any help?

voldomart13 said:
I just flashed cm 10.1 did a full wipe. It looks good only problem is after initial boot up I get no cell signal. Any help?
Click to expand...
Click to collapse
This has already been stated over 100 times in the cm10 dev thread. you should probably go look over there dude.

Seriously? I couldn't find it -_- well that's great this is my dads phone too, so now I gotta go back down to cm10 -_-

Heads up going back to cm10.... Restore from a backup if possible. If you just flash using a cm10 zip and 4.1 gapps you may get an AOSP keyboard FC loop. Only way around that, if it happens, is to reflash stock with ODIN, do a factory reset and then flash cm10.
This has happened to several people, myself included, I just used my TWRP backups and it worked perfectly.
Side Note: If using TWRP restore, you will need to use the built in file manager and copy your /sdcard/0/TWRP folder back to /sdcard/TWRP. 4.2.1 modified the directory structure to make way for multi user support.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

I actually did that but I was able to adb push the new gapps to my sd card and install them. Oh wait read that wrong nevermind thanks

Related

Jellybean only boot loop

Hi guys I searched the forums but can't seem to figure this one out. I can flash and boot all ICS Roms completely fine. When I try ANY Jellybean ROM AOKP, CM whatever I get stuck on a boot screen loop. I use these steps:
Flash darkside super wipe
Flash ROM
Flash gapps
Flash darkside super wipe cache
Reboot
Now I've tried cwm 5.x.x and 6.x.x and twrp. Any suggestions?
MARINERMOOSE241 said:
Hi guys I searched the forums but can't seem to figure this one out. I can flash and boot all ICS Roms completely fine. When I try ANY Jellybean ROM AOKP, CM whatever I get stuck on a boot screen loop. I use these steps:
Flash darkside super wipe
Flash ROM
Flash gapps
Flash darkside super wipe cache
Reboot
Now I've tried cwm 5.x.x and 6.x.x and twrp. Any suggestions?
Click to expand...
Click to collapse
Download the file again. Sounds like a bad flash.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Thanks elesbb but this bootloop happens with ANY JB from I try to.flash on my hercules. So I don't think its bad downloads I wonder if I posted a log at during boot if someone could help.
MARINERMOOSE241 said:
Thanks elesbb but this bootloop happens with ANY JB from I try to.flash on my hercules. So I don't think its bad downloads I wonder if I posted a log at during boot if someone could help.
Click to expand...
Click to collapse
That's why I recommended downloading again. Sometimes packets are lost in cyberspace. I don't see how your device is the only one doing this. Gotta be something on your end. (Not trying to point fingers. Just saying it can be a million and 2 things )
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Ok, I now downloaded 4 different roms ALL Jellybean and ALL get frozen during the bootscreen and bootloop. ADB just sits at waiting for device when trying to logcat. I've reflashed to stock gingerbread just fine, reflashed to ICS AOKP just fine no loops. But going to JB after just keep causing a bootloop, its driving me crazy.
MARINERMOOSE241 said:
Ok, I now downloaded 4 different roms ALL Jellybean and ALL get frozen during the bootscreen and bootloop. ADB just sits at waiting for device when trying to logcat. I've reflashed to stock gingerbread just fine, reflashed to ICS AOKP just fine no loops. But going to JB after just keep causing a bootloop, its driving me crazy.
Click to expand...
Click to collapse
What cwm are u using? I couldn't flash any Jb roms with cwm 6
Sent from my SAMSUNG-SGH-T989 using xda premium
Rememdium said:
What cwm are u using? I couldn't flash any Jb roms with cwm 6
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Were you getting freeze bootloops?
I have tried cwm 5.x nd 6 which I'm on now. Also twrp gave me the same loop. I've even gone as far.as.formatting sdcard and eemc with no luck.
MARINERMOOSE241 said:
Were you getting freeze bootloops?
I have tried cwm 5.x nd 6 which I'm on now. Also twrp gave me the same loop. I've even gone as far.as.formatting sdcard and eemc with no luck.
Click to expand...
Click to collapse
Try switching to TWRP.
Then re-download the JB rom you want to use, put it on the root of your internal SD, make sure the MD5 matches and then try flashing again. I think most of these JB boot problems are coming from CWM recoveries.
Digital1325 said:
Try switching to TWRP.
Then re-download the JB rom you want to use, put it on the root of your internal SD, make sure the MD5 matches and then try flashing again. I think most of these JB boot problems are coming from CWM recoveries.
Click to expand...
Click to collapse
No they aren't. Teamchopsticks recommends cwm 6.0.1.1 as the optimal recovery to use.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
elesbb said:
Teamchopsticks recommends cwm 6.0.1.1 as the optimal recovery to use.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Where did you read that? And does 6.0.1.1 still have a broken cache wipe?
Someone had a similar problem in the dev thread and switching recoveries seemed to fix it. So worth trying.
Sent from a BAMF Jedi ROM from the Lightside
Digital1325 said:
Where did you read that? And does 6.0.1.1 still have a broken cache wipe?
Someone had a similar problem in the dev thread and switching recoveries seemed to fix it. So worth trying.
Sent from a BAMF Jedi ROM from the Lightside
Click to expand...
Click to collapse
I read it on their website but i came across it in binarybishops nightly thread. And no the cache wipe is fixed. I use the touch version, tried TWRP and CWM 5 hell i tried them all! They all produced the exact same results for me as far as performance goes. But ive never had any issues with 6.0.1.1 i love it to death
Ok guys this is very puzzling. I have been flashing roms for years and have never had a loop like this.
So I flashed TWRP again verified the md5 has was correct for both AOKP JB nightly and gapps. Flashed following the correct steps posted in the thread by Whitehawkx and I still get a bootloop freeze on the AOKP unicorn. So I tried CM 10 nightly... same freeze/loop. I downloaded AOKP ICS, no loop at all boots fine.
I've tried cwm 5, 6, and twrp all with the exact same results. I have formated SD external and internal EMMC... nothing has worked.... All I want is some Jelly bean goodness.... I flashed AOKP on my nexus 7 just fine. Like I said I am really stumped on this one as to why ICS roms would flash perfectly fine and using the same steps JB roms bootloop.
MARINERMOOSE241 said:
Ok guys this is very puzzling. I have been flashing roms for years and have never had a loop like this.
So I flashed TWRP again verified the md5 has was correct for both AOKP JB nightly and gapps. Flashed following the correct steps posted in the thread by Whitehawkx and I still get a bootloop freeze on the AOKP unicorn. So I tried CM 10 nightly... same freeze/loop. I downloaded AOKP ICS, no loop at all boots fine.
I've tried cwm 5, 6, and twrp all with the exact same results. I have formated SD external and internal EMMC... nothing has worked.... All I want is some Jelly bean goodness.... I flashed AOKP on my nexus 7 just fine. Like I said I am really stumped on this one as to why ICS roms would flash perfectly fine and using the same steps JB roms bootloop.
Click to expand...
Click to collapse
It's something wrong with your flash file. Use an actual adapter to transfer the file. And download it again. Then if you still get the loop plug your phone into your computer and boot it up then run adb logcat.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
elesbb said:
It's something wrong with your flash file. Use an actual adapter to transfer the file. And download it again. Then if you still get the loop plug your phone into your computer and boot it up then run adb logcat.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
When you say flash file do you mean the ROM? If so I've tried downloading it on my Mac and transferred it via USB mode still no dice. Also I.tried to.log at during the bootloop but adb never sees the device.
MARINERMOOSE241 said:
When you say flash file do you mean the ROM? If so I've tried downloading it on my Mac and transferred it via USB mode still no dice. Also I.tried to.log at during the bootloop but adb never sees the device.
Click to expand...
Click to collapse
Yes im saying the zip. Something isnt getting placed where it belongs or something is corrupt. And DONT use the USB mode, get an actual Mirco SD to SD adapter and a SD to USB adapter and do it that way.
elesbb said:
Yes im saying the zip. Something isnt getting placed where it belongs or something is corrupt. And DONT use the USB mode, get an actual Mirco SD to SD adapter and a SD to USB adapter and do it that way.
Click to expand...
Click to collapse
I have an adapter so I can try that right now. However, if the md5 hash is correct wouldn't that mean the zip downloaded correctly? And it still doesn't answer why every JB from bootloops while ICS does not.
MARINERMOOSE241 said:
I have an adapter so I can try that right now. However, if the md5 hash is correct wouldn't that mean the zip downloaded correctly? And it still doesn't answer why every JB from bootloops while ICS does not.
Click to expand...
Click to collapse
Yes that is usually the norm. But it is millions and millions and millions of bits of data we are talking about here... all it takes is for one of those bits to either not be there or be in the wrong place to screw it up. And yes that is extremely strange, but seeing as you are the only one experiencing this, i am sure its not the ROMs and its something you are doing or not doing. Im not trying to be rude or imply that you are dumb. its just extremely hard to pin point something weird like this when i dont have the device in my hands. See where im getting here?
elesbb said:
Yes that is usually the norm. But it is millions and millions and millions of bits of data we are talking about here... all it takes is for one of those bits to either not be there or be in the wrong place to screw it up. And yes that is extremely strange, but seeing as you are the only one experiencing this, i am sure its not the ROMs and its something you are doing or not doing. Im not trying to be rude or imply that you are dumb. its just extremely hard to pin point something weird like this when i dont have the device in my hands. See where im getting here?
Click to expand...
Click to collapse
I totally agree I don't believe its the roms themselves as they seem to work for most people. I've just never ran across this before.
MARINERMOOSE241 said:
I totally agree I don't believe its the roms themselves as they seem to work for most people. I've just never ran across this before.
Click to expand...
Click to collapse
I have on my HD2. But a complete format of the memory card using HP USB disk tools fixed it. Have you tried that yet?
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
elesbb said:
I have on my HD2. But a complete format of the memory card using HP USB disk tools fixed it. Have you tried that yet?
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Formated the SD card ... used the external adapter to copy the flash to the SD same bootloop I also copied the file directly to internal storage removed the sd card and flashed same result... looks like no Jelly bean for me... so freaking odd as I can flash ICS any rom all day long just fine.

[Solved] Flashed cyanogenmod, stuck on boot screen

Hey guys, I'm really new to rooting, flashing roms, and Android in general (I've used iOS since 2007 until a month ago... please have mercy on my soul). I have an AT&T GN2 that I would like to remove the bloatware from, hence why I began investigating rooting, but it's snowballed into my desire to try out some of the amazing ROMs that the developers here have produced. Since the Note 2 uses the Exynos 4, I rooted using the ExynosAbuse exploit and downloaded Titanium Backup to freeze the AT&T apps. So far, so good.
However, I am wanting to get into how to flash custom ROMs, like CyanogenMod, so I downloaded the CWM RomManager and flashed the CWM Recovery. I downloaded the CyanogenMod 10.1 release for the i317 model (here: http://forum.xda-developers.com/showthread.php?t=2024495) and the latest gApps package (for 4.2.1), and flashed both from CWM RomManager. When it rebooted, it showed the CyanogenMod boot screen, but it appears to be stuck there. I'm not sure what to do at this point, and am hoping I didn't brick my phone. Is there anything I can do at this point?
Use the three button combo to get into recovery, should be volume up, home, and power, and then wipe data or install a stock rooted ROM. That should help get you to a bootable stage.
Sent from my GT-N7105 using xda premium
Have you changed kernel???
Sent from my MT11i using xda app-developers app
id10terrordfw said:
Use the three button combo to get into recovery, should be volume up, home, and power, and then wipe data or install a stock rooted ROM. That should help get you to a bootable stage.
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
When I booted into recovery, I got the CWM recovery (which is a good thing, I suppose). I wiped the cache, and then installed the CM 10.1 zip and gApps zip. However, I think I still need to wipe data/factory reset, right?
So, at this point, I've:
1. Rooted the device using Chainfire's ExynosAbuse apk (super easy).
2. Installed RootChecker (success) and TI backup (froze bloatware apps).
3. Downloaded CWM RomManager.
4. Flashed CWM Recovery.
5. Downloaded CM 10.1 port for i317 (the AT&T GN2 model) and the 4.2.1 gApps zips.
6. Chose to install ROM from SD card in RomManager, added both CM 10.1 and gApps, and only selected install (did not wipe cache or user data at this point).
7. Received blue CyanogenMod boot screen... excited... but it remains on the boot screen. Sad face.
8. Removed battery to power the device off, placed battery back in, and then booted into recovery mode (CWM recovery).
9. Installed the CM 10.1 zip and gApps zip from SD, then wiped cache.
10. ???
Wipe data factory reset. Wipe cache/dalvik. Flash cm, flash gapps. Reboot
And dont use rom manager. Do it in recovery
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Peleus16 said:
Have you changed kernel???
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
This is a great point, at no point op has mentioned kernel.
Sent from my SAMSUNG-SGH-I317 using xda premium
cdshepherd said:
Wipe data factory reset. Wipe cache/dalvik. Flash cm, flash gapps. Reboot
And dont use rom manager. Do it in recovery
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Okay, booted into CMW recovery and performed all in that order. It booted! Hurrah. Only problem: the AOSP keyboard crashes constantly, making text input not possible. Sigh...
NowhereOutThere said:
Okay, booted into CMW recovery and performed all in that order. It booted! Hurrah. Only problem: the AOSP keyboard crashes constantly, making text input not possible. Sigh...
Click to expand...
Click to collapse
Boot back into recovery and fix permissions. That may help
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Boot back into recovery and fix permissions. That may help
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Okay, I booted into recovery mode and fixed permissions... the keyboard still crashes, which means I can't type anything. Do I have to do anything with the kernel? I didn't wipe the dalvik cache, should I have done that?
EDIT: wiped dalvik cache, didn't do anything... apparently, this was a fine release so I'm not sure what could be causing the keyboard issues.
NowhereOutThere said:
Okay, I booted into recovery mode and fixed permissions... the keyboard still crashes, which means I can't type anything. Do I have to do anything with the kernel? I didn't wipe the dalvik cache, should I have done that?
EDIT: wiped dalvik cache, didn't do anything... apparently, this was a fine release so I'm not sure what could be causing the keyboard issues.
Click to expand...
Click to collapse
Im not exactly sure either. I have yet to flash cm. Read the cm thread?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Im not exactly sure either. I have yet to flash cm. Read the cm thread?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
So what ROM are you using? I just picked cyanogenmod because I've heard of it before, but I would like something that works. Is there a way to add another ROM onto the phone's storage, as I don't have an SD card... And since I can't type anything, it's not like I can download it from the phone's browser?
NowhereOutThere said:
So what ROM are you using? I just picked cyanogenmod because I've heard of it before, but I would like something that works. Is there a way to add another ROM onto the phone's storage, as I don't have an SD card... And since I can't type anything, it's not like I can download it from the phone's browser?
Click to expand...
Click to collapse
Plug it into your computer and see if you can mount your internal sd. If you can download a new rom to your computer and transfer it to sd. Did you make a backup before flashing?
Im just running stock rooted for now.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Well, I'm downloading CleanROM right now. I also downloaded another cm 10.1 file just in case, perhaps it's because I downloaded it on the mobile Chrome browser that I'm having problems? I also downloaded a kernel from the thread to help with performance. However, if I can't get these on the phone, it doesn't matter. Since I'm on a Mac, I have to use Android File Transfer, and it isn't registering my phone, unfortunately. I may have to go out and buy a cheap SD card and throw the files on there. It may not hurt to have one around, anyways.
Text yourself the download link to CleanRom. :thumbup:
And chrome shouldnt have made a difference. I take it you didnt make a nandroid backup before you flashed cm?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Text yourself the download link to CleanRom. :thumbup:
And chrome shouldnt have made a difference. I take it you didnt make a nandroid backup before you flashed cm?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
No... I thought that a backup of the original ROM was made when flashing CWM recovery, but I am a noob and that did not happen. Unfortunately, the browser doesn't even work! So I cannot text myself the link for the download. I should be able to flash a zip file from a micro sdhc, right?
Flash the right GAPPS, the crashing keyboard is a symptom of incorrect GAPPS. The December one is for 4.2.1 only, which is what CM10.1 is based on. Make sure you flash the right GAPPS with the right CM version.
Sent from my GT-N7105 using xda premium
The CM you linked in the OP is CM10 not 10.1, so you flashed the wrong GAPPs
ManelScout4Life said:
The CM you linked in the OP is CM10 not 10.1, so you flashed the wrong GAPPs
Click to expand...
Click to collapse
Oh... crap. Is there any way I can get the correct gApps on my phone? Ugh... I'm going to have access to a Windows machine today, so I can download the correct GAPPS and put them on my flash drive. I can still put it in USB debugging mode, but will the PC recognize it? Android File Transfer software for Mac does not recognize the phone any more, so I'm a bit limited in what I can do. Unless, like I said before, I can just pop in an SD card with the correct file.
Just grab goo manager from the market and dl the correct gapps to your phone. Either that or use your phones browser. No need for a pc. Boot in recovery, wipe cache and dalvik and flash correct gapps. Should be gtg.
Edit: just saw your browser isn't working. Goo manager's your best bet. Could always try another browser from the market as well. Good luck.
NowhereOutThere said:
Oh... crap. Is there any way I can get the correct gApps on my phone? Ugh... I'm going to have access to a Windows machine today, so I can download the correct GAPPS and put them on my flash drive. I can still put it in USB debugging mode, but will the PC recognize it? Android File Transfer software for Mac does not recognize the phone any more, so I'm a bit limited in what I can do. Unless, like I said before, I can just pop in an SD card with the correct file.
Click to expand...
Click to collapse
While in recovery plug usb into computer (make sure drivers are installed) in recovery menu navigate to mount usb storage. See if that works
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

[Q] CM10.0.0 Stable Issues

Hello, Just flashed CM10 after wiping data/factory reset, wipe cache, wtc.. I installed the latest GApps JB-2012121, and my AOSP Keyboard keeps crashing.. Like.. every few seconds.. I read to download another older versions of the GApps.. So I'm trying JB-20121011, and now.. My SD card is all jacked.. Using windows, it shows the correct space available.. but when I try and open it.. There is nothing there. I tried placing a Swype.apk in the SD card root.. but it won't show up on the File Manager..
So, what do? Anyone know where the External SD is using the CM10 File Manager?
Leejin said:
Hello, Just flashed CM10 after wiping data/factory reset, wipe cache, wtc.. I installed the latest GApps JB-2012121, and my AOSP Keyboard keeps crashing.. Like.. every few seconds.. I read to download another older versions of the GApps.. So I'm trying JB-20121011, and now.. My SD card is all jacked.. Using windows, it shows the correct space available.. but when I try and open it.. There is nothing there. I tried placing a Swype.apk in the SD card root.. but it won't show up on the File Manager..
So, what do? Anyone know where the External SD is using the CM10 File Manager?
Click to expand...
Click to collapse
Great.. So now I can't even do ANYTHING. I wiped factory data again.. Flashed a JB-20120706 Version of GApps.. and still NOTHING.. I can't get into the OS because it's asking for Google account.. then if I cancel that, it asks for a name.. I can't get around it.. Keyboard will NOT WORK.
Update:
Bricked..
I got sick of dealing with CM10 "Stable" (Har HAr) so I tried to again.. factory wipe and flash JellyBam 5.1.. Dear god.. everything went smooth.. Then on Reboot.. BAM.. Black Screen... Nothing.. No amount of battery pulls, holding power does ANYTHING.
So.. I've ruined my phone? I followed instructions to a T.
Any way of recovering it?
Can you access recovery or download mode?
Sent from my SGH-I747M
Leejin said:
Update:
Bricked..
I got sick of dealing with CM10 "Stable" (Har HAr) so I tried to again.. factory wipe and flash JellyBam 5.1.. Dear god.. everything went smooth.. Then on Reboot.. BAM.. Black Screen... Nothing.. No amount of battery pulls, holding power does ANYTHING.
So.. I've ruined my phone? I followed instructions to a T.
Any way of recovering it?
Click to expand...
Click to collapse
Get in download or recovery. Wipe all and flash stock with Odin. You can build back up from there.
Btw, cm10 is stable. Perhaps you flashed the wrong one or some changes was made that didn't go so well. Either way, it should work after going back to stock.
Sent from my SGH-I747 using xda app-developers app
Mr Patchy Patch said:
Can you access recovery or download mode?
Sent from my SGH-I747M
Click to expand...
Click to collapse
Nope.. It's Toast. I don't have a Jig either.. But plan on throwing one together after work..
I figured out what I did though..
I flashed the i9000 version of the JellyBAM ROM, not the D2ATT version.. Damn..
a $600 mistake.. So bummed.
BWolf56 said:
Get in download or recovery. Wipe all and flash stock with Odin. You can build back up from there.
Btw, cm10 is stable. Perhaps you flashed the wrong one or some changes was made that didn't go so well. Either way, it should work after going back to stock.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
No download or Recovery.. It's TOAST.
I'm gonna make a Jig after work tonight.

In a Pickle. Phone won't get signal.

[EDIT] Thanks everyone, I got the phone up and running. You can read this to see what I did to get it fixed.
Okay. So I have had my S2 for awhile. I have also lost all service where normally I had really good service, and another phone with the same provider has good signal. When I install a new CM ROM hoping that will fix the problem, it crashes after i click start, it then reboots and does the screen android is upgrading. I am thinking there is problem with the internal memory. Astro File Manager crashes when I try to navigate into the memory. I suspect there is an actually error with the internal memory. I figure that i could reformat the internal memory or scan it for bad sectors. Problem with that is that the connector on the phone is broken. Has been for awhile. I am hoping there is someway to salvage it
I recently got an S4 when these problems started. I am trying to get this working as A) A back up phone B) a phone my dad could possiibly use until he gets a new one.
Try installing latest radio
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Spud37 said:
Okay. So I have had my S2 for awhile. I have also lost all service where normally I had really good service, and another phone with the same provider has good signal. When I install a new CM ROM hoping that will fix the problem, it crashes after i click start, it then reboots and does the screen android is upgrading. I am thinking there is problem with the internal memory. Astro File Manager crashes when I try to navigate into the memory. I suspect there is an actually error with the internal memory. I figure that i could reformat the internal memory or scan it for bad sectors. Problem with that is that the connector on the phone is broken. Has been for awhile. I am hoping there is someway to salvage it
I recently got an S4 when these problems started. I am trying to get this working as A) A back up phone B) a phone my dad could possiibly use until he gets a new one.
Click to expand...
Click to collapse
Just go all stock jb
Sent from my SGH-T989 using Tapatalk 2
OM13 said:
Try installing latest radio
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Where can I get the latest radio
esema1o said:
Just go all stock jb
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Where do I find stock jb for T989? Rooted Stock?
Spud37 said:
Where can I get the latest radio
Click to expand...
Click to collapse
UVMC6 is the radio you need for the newest CM 10.1 ROMs.
http://forum.xda-developers.com/showthread.php?t=1895400
i was having the same problem i think it was me flashing so god damn much lol couldnt get signal for the life of me wiping everything i could and today i said F it and just did a full wipe full system wipe and flashed my daily and all is good after loosing signal for 3 days :stumped : but all is good now
meekrawb said:
UVMC6 is the radio you need for the newest CM 10.1 ROMs.
http://forum.xda-developers.com/showthread.php?t=1895400
Click to expand...
Click to collapse
Do i just flash it though CWM?
krazierokz said:
i was having the same problem i think it was me flashing so god damn much lol couldnt get signal for the life of me wiping everything i could and today i said F it and just did a full wipe full system wipe and flashed my daily and all is good after loosing signal for 3 days :stumped : but all is good now
Click to expand...
Click to collapse
Honestly this could be my problem, How do i do a full system wipe. I assume its slightly different then a normal wipe down when you install a new ROM
yes just flash that file through CWM and as far as my thing goes i went into recovery and went into mounts and storage and format system then wipe dalvik/cache for good luck lol then flash the ROM you wanted then wipe cache/dalvik again then fix permissions let it boot up rest for 10 min then reboot to recovery and flash the proper gapps to the rom wipe cache/dalvik fix permissions for the last time good luck measures and should be good to go....FYI whatever ROM you do flash if it does not come with the MC6 radio you will have to flash it again afterwards if its not getting signal good luck and i know the process seems long but i had my phone up and running again within the hour
EDIT: if all else fails which it shouldnt just try this and go back to stock and just reroot and flash again http://forum.xda-developers.com/showthread.php?t=1513359
krazierokz said:
yes just flash that file through CWM and as far as my thing goes i went into recovery and went into mounts and storage and format system then wipe dalvik/cache for good luck lol then flash the ROM you wanted then wipe cache/dalvik again then fix permissions let it boot up rest for 10 min then reboot to recovery and flash the proper gapps to the rom wipe cache/dalvik fix permissions for the last time good luck measures and should be good to go....FYI whatever ROM you do flash if it does not come with the MC6 radio you will have to flash it again afterwards if its not getting signal good luck and i know the process seems long but i had my phone up and running again within the hour
EDIT: if all else fails which it shouldnt just try this and go back to stock and just reroot and flash again http://forum.xda-developers.com/showthread.php?t=1513359
Click to expand...
Click to collapse
When I wiped the Dalvik/cache it said unknown wolum path /sd-ext
That said this fixed it. Thank you so much. I think it was because I would update almost everyday with the latest nightly of CyanogenMod.
No problem man I was super frustrated myself i know how u must have felt happy flashing don't forget to hit the thanks :beer:
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

[Q] My phone freezes and restarts when starting up a CM ROM

I was using the latest alpha of CM11, then i i wanted to get back to CM10.2, i did all i had to do (wipes, and stuff) and when starting up, the phone frezees and keep on doing this...
I also have searched about this issue and found no answer.
tpag02 said:
I was using the latest alpha of CM11, then i i wanted to get back to CM10.2, i did all i had to do (wipes, and stuff) and when starting up, the phone frezees and keep on doing this...
I also have searched about this issue and found no answer.
Click to expand...
Click to collapse
Have you tried booting to recovery, then doing an advanced wipe (system/data/cache/dalvik) and reflashing rom/gapps?
What version of recovery are you using?
Almite said:
Have you tried booting to recovery, then doing an advanced wipe (system/data/cache/dalvik) and reflashing rom/gapps?
What version of recovery are you using?
Click to expand...
Click to collapse
yes, i have. I also got back to stock, used an older recover, flashed with an older version of CM and nothing. I first was using CWM 6.0.3.7., after that I used 6.0.4.3, then an older version of TWRP but nothing. I also tried booting to system without flashing gapps.
With stock ROM everything works just fine.
Just wipeout internal and external card once and than install with twrp 2.6.1.0. And don't forget to say thanks
Sent from my SGH-T989 using xda app-developers app
iamdofus said:
Just wipeout internal and external card once and than install with twrp 2.6.1.0. And don't forget to say thanks
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Well, thank you, but it didnĀ“t work.
it happened to me the same thing months ago. never had solution. still in waiting. attempt internal and external SD format. and followed the same. I hope someday they can come up with the solution! : (
i have the same problem too
I try to install multiple ROM 4.2.2 and I could only install one version AOKP Milstone JB1. I also worked the other. however all 4.1.2 rom if I worked. I could not install any 4.3 and 4.4 now does not know what is the problem but I've tried everything! anyone found the solution yet but I see I'm not the only one! (excuse my bad English, not my language )
Well you all are right, I am also using shadow mastery (stock rooted rom). Just because I had the same problem sometimes stucking and rebooting and sometimes after going in gallery. Even I can't use 4.3 and 4.4 roms. Anyone have to contact with room developer or someone who know about this problem.
Sent from my SGH-T989 using xda premium
You might want to find an Official T-Mobile or Telus 4.1.2 or 4.0.3/4.0.4 rom that is Odin flashable, not one that has been custom made/flashable from recovery - then just start over after getting back to true stock, change to TWRP or CWM recovery that is 4.3+ compatiable, root and then flash rom/gapps etc.

Categories

Resources