Related
Hi,
I thought id post this here as well, as its a concern for Touch Pro2 owners.
Basically, the Touch Pro 2 has a little sticker under the battery cover, but on the outside, which goes from cross-hatched to red if it gets red. If you send one in for repair with it red, the UK repair centre doesnt even look at it, and bills you over £300 for a repair (or £20 to get the phone back unrepaired).
Thing is, im sure it hasnt met water. It must have been my sweaty hands when changing the SD card (whose slot is right next to the sticker).
I advise everyone with a touch pro 2 to cover the sticker somehow (i covered it in a tiny bit of paper, which in turn i covered with plastic tape on my replacement touchpro2 from ebay).
See my original thread (with a picture) here
http://www.modaco.com/content/pocke...657/htc-uk-refusing-to-repair-my-touch-pro-2/
Im currently in dispute with HTC about this. I filled in their customer service satisfaction survey with very low marks, and someone from HTC rang me, and said he would try and sort it. Ive also written 2 letters to their head office and their repair centre to complain.
George
Is it possible to just cover the sticker with a piece of cellophane tape?
Thanks for the heads-up dude. Just checked mine and it's half turned read. It's about a week old so no idea how it happened. Unless rain somehow got in it, but if you can't use them in the rain without voiding warranty that is shocking.
Interesting - mind attaching that picture here for those of us who aren't members of the other forum? This is pretty scary for HTC to base their entire decision to warranty on a moisture-sensitive sticker......
Here is the pic...
Here is the picture HTC sent me. Interesting to see other(s) have had the issue. Has anyone else got a red sticker despite not having got it wet? that will help my case with HTC if it comes to small claims situation...
thanks
George
ripnetuk said:
Here is the picture HTC sent me. Interesting to see other(s) have had the issue. Has anyone else got a red sticker despite not having got it wet? that will help my case with HTC if it comes to small claims situation...
thanks
George
Click to expand...
Click to collapse
wow...thats kind of sneeky of them to do. I have had someone spill water next to my phone and that would ahve easily caused it to turn red. Or lets say your talking on the phone in the rain. If a water dropplet hits it the right way, the red sitcker is going to show. I guess I will put scotch tape over it.
Just checked mine and found a red sticker. Hope I dont have need of repair service.
Yep my 10 week old one is pinky red, still works ok, I don't think it has changed since I had it though?
It might be different on the CDMA model, but I don't see one near the microSD slot. There is one on the opposite side that is clearly visible. With 3 internal moisture detectors (one on the headphone jack), one on the side, and one on the battery, it sure sounds like some planned obsolescence just through regular wear and tear.
Also, remember that the sticker is already pink/red, but it will bleed out when wet (or even humid).
ripnetuk said:
Here is the picture HTC sent me. Interesting to see other(s) have had the issue. Has anyone else got a red sticker despite not having got it wet? that will help my case with HTC if it comes to small claims situation...
thanks
George
Click to expand...
Click to collapse
Thank you for the picture, George! Mine is still nice and white with red cross hatches, BUT..... I noticed that the mount I was using from ProClip custom mounted on my air vent in my vehicle produced a TON of condensation on the backside of my phone the last time I removed it - today was a hot one here in Florida! Since the air vent is largely blocked by the phone's holster, I decided to suffocate the vent by pulling off the vent and putting a plastic bag inside it and then reassembling the cover, so it isn't out of place.
Considering I run a vinyl graphics company, I'll be getting a small square of my thin by heavy duty metallic grey vinyl cut out and put over an oversized section of the moisture detector!!! NOT going to have anyone dispute warranty issues with me over unpredictable weather or a small amount of condensation!!!
Wow, I checked my phone which I just got a week ago, and that sticker is already is half red (other half is still white). Of course it was no where near water except for maybe when I put on the screen protector. I hope we get enough complaints about this to HTC so they'll work something out with us. By the way, I have a Sprint TP2.
AssassinsLament said:
Of course it was no where near water except for maybe when I put on the screen protector.
Click to expand...
Click to collapse
(remembering that I just said I run a vinyl graphics company....)
Why in the world did your phone come into contact with water when you were putting on the screen protector???????????
GarciaM25 said:
(remembering that I just said I run a vinyl graphics company....)
Why in the world did your phone come into contact with water when you were putting on the screen protector???????????
Click to expand...
Click to collapse
Sprayed the screen with a water based solution to apply the screen protector?
Got a response back from HTC
Dear Sir,
I apologise for the delay getting back to you - I wanted to be certain I had all the information at hand before replying.
I am afraid that unfortunately, the answer is not good, and the repair centre and sticking with their stance in this matter.
This quote comes directly from our escalations office, after they received your letter:
Keeping a phone in plastic bag in Hot or Humid conditions can cause condensation, especially when there is a temperature change. Not being able to package the phone “correctly” is not a suitable claim, the packaging arrived with us undamaged.
Actual fault is irrelevant, the device has been in contact with moisture and has been modified without consent (illegal software)
Modification without consent is against the warranty card. The use of non HTC software to unlock a device or install unofficial, and unlicensed versions of Microsoft products is also against the warranty, and in the case of Microsoft software also illegal and infringes on copyright laws. If this had been the only issue he would have been quoted for Mainboard replacement only.
The effects of moisture entering a device cannot be predetermined, the fact that a part has not failed yet due to moisture does not assure that it will not fail in the future. In order to be certain that a moisture affected device will function until the end of the warranty period we therefore must replace all possible components.
Whilst we value our customers, in this instance we are unable to agree to your request for a warranty repair on this device.
HTC can only assist you further by providing documentation to support any insurance claim you may be able to make for accidental damage, or by returning your device to you unrepaired which we will not charge you for.
Unfortunately, I cannot push this any further. This decision is above my authority, and I have to abide by our Head Offices decision.
I understand this may be a frustrating response after such a long wait and I wish the news were better. I can only recommend at this point that you contact your insurance company and raise the issue with them.
Best Regards,
HTC Europe Customer Care
AssassinsLament said:
Sprayed the screen with a water based solution to apply the screen protector?
Click to expand...
Click to collapse
Eeek, okay! Well, I've never done that for screen protection, and I buy package of 17" monitor screen protectors to cut up and use for loads of little projects.... Did the instructions tell you the glue had to adhere that way? Most newer screen protectors don't use that type of adhesive anymore, bonding to the surface without leaving an residue that would be required when using water-based solutions........ If a screen protector kit I purchased required me to spray on something water-based before application, I'd throw it out and start with something a little less abrasive and potentially damaging!
And George, that SUCKS..... wow, well, now you know why I buy a SquareTrade warranty for EVERY expensive electronic item I own, right down to the Jawbone2 I use everyday! When my charging / data USB port broke on my first Kaiser, it was during the 1 year warranty, so I called HTC first - they told me that it was a wear and tear item, it would cost well over $300 to repair, and that NO warranty company would repair it under their terms and conditions..... I promptly called SquareTrade, they had me send it in, and in 8 days later, I had a brand new charging port installed at NO cost to me!
For more details, check out www.squaretrade.com - and no, I don't work for them, but I tell everyone I know about how great they are and cheap their plans are!
My Response to HTC
Can you tell me the official address of HTC UK please so I can
instigate county court proceedings?
And can you relay the following back to your head office please (or
even better, give me a contact there so I dont have to bother you
again)
1. I have a number of people who support my claim that the sticker can
turn red without the device having got wet enough to cause damage. See
my link to the forum earlier.
2. What I didnt realise earlier is that the sticker in question is on
the outside of the phone - i accept I might have handled it with
sweaty hands. If you had found a sticker on the inside that indicated
water ingress, I would accept your point.
3. It didnt have illegal software on it - it had Windows Mobile 6.1
(ok, not the original rom). i am licensed to use Windows Mobile 6.1,
as that came with the device. The exact build of the rom is NOT an
excuse to not repair my device
4. The 'condition' of warranty regarding 'illegal' software was only
sent to me AFTER you booked the phone in. I wasnt told this in the
original email when I sent it off.
5. I dont NEED HTC's 'consent' to install whatever I want on my phone.
It was bought unlocked, and had an official WM6.1 build, downloaded
from HTC.
6. Are you seriously saying that HTC replace mainboards in preference
to re-flashing the rom? thats plain mad, and not very environmentally
friendly.
Anyway, what is comes down to is that I dispute that the device got
sufficiently wet for you to dishonor the warranty.
Furthermore, HTC know full well that the rom, and the red sticker has
nothing to do with the problem reported (they say themselves that its
not relevant). I believe I have a good chance at getting this sorted
out by the county court system, which will only cost me around £30 - a
gamble im willing to take.
GarciaM25 said:
Eeek, okay! Well, I've never done that for screen protection, and I buy package of 17" monitor screen protectors to cut up and use for loads of little projects.... Did the instructions tell you the glue had to adhere that way? Most newer screen protectors don't use that type of adhesive anymore, bonding to the surface without leaving an residue that would be required when using water-based solutions........ If a screen protector kit I purchased required me to spray on something water-based before application, I'd throw it out and start with something a little less abrasive and potentially damaging!
Click to expand...
Click to collapse
Static-cling screen protectors are so 2005:
Installation video
Scratch test video
A little water never hurt anything. No, it's not glue, and it doesn't leave any adhesive residue. You can keep living in the dark ages, but the 3M Scotchgard material is amazing. I've done over a dozen installations on my devices and never had any water damage, and I've never activated a moisture detector. Zagg was one of the first to make this available pre-cut for electronic devices, but there are at least a half dozen startups (Best Skins Ever, PhantomSkinz, Ghost Armor, BodyGuardz, etc.).
And no, I don't work for any of them either. Maybe it's because I've done water cooling on my PC that it doesn't scare me to use a small amount of mostly non-conductive water and then let it dry for 24 hours.
Thanks for the heads up, I was wondering what that was.
Mines perfectly fine, red and white stripes, but I'll cover it up with something.
thats a horrible picture. where EXACTLY is this sticker supposed to be? on my usa tmobile version, the only sticker i see is located on the side of the case next to where the battery sits.if this is the sticker you're referring to, it seems like a pretty logical place to me. water would have to creep in to the side of the battery to hit the sticker. unless you have one somewhere i don't? you mean on the inside of the battery cover? your post say's on the "outside". ???
crazythunder said:
thats a horrible picture. where EXACTLY is this sticker supposed to be? on my usa tmobile version, the only sticker i see is located on the side of the case next to where the battery sits.if this is the sticker you're referring to, it seems like a pretty logical place to me. water would have to creep in to the side of the battery to hit the sticker. unless you have one somewhere i don't? you mean on the inside of the battery cover? your post say's on the "outside". ???
Click to expand...
Click to collapse
Ummmmmmmmmmmmmmmmm, look to the left of your MicroSD card maybe?
So on my 3rd Lumia 900, I noticed the sim slot tray wasn't flush with phone... I never did get that fixed but whatever...
Anyways... I removed the tray and noticed 2 things 1) a stricker with some numbers, and 2) a second sticker that is actually used to mask some type of button or something. I didn't notice this on the first 2 devices I had (maybe they didn't have it, or maybe I didn't notice). I had to remove the plastic thick sticker on the right side to see the button or whatever it is... Took me forever to put it back on in place properly.
Anyone know what this is?
IIRC, it covers the slot that allows you remove the locking pin that retains the screen, so you can get inside the phone. You can use the SIM removal tool as a lever to remove the pin, then use a plastic pry tool to remove the screen.
This will void your warranty.
DONT TOUCH IT!!!
if you absolutely must touch it, be aware that your warranty is at stake. if you aren't familiar with the inner workings of a handset, its best to leave it alone.
You wouldn't start poking around inside of your TV if you found a small hole.
Zhariak said:
So on my 3rd Lumia 900, I noticed the sim slot tray wasn't flush with phone... I never did get that fixed but whatever...
Anyways... I removed the tray and noticed 2 things 1) a stricker with some numbers, and 2) a second sticker that is actually used to mask some type of button or something. I didn't notice this on the first 2 devices I had (maybe they didn't have it, or maybe I didn't notice). I had to remove the plastic thick sticker on the right side to see the button or whatever it is... Took me forever to put it back on in place properly.
Anyone know what this is?
Click to expand...
Click to collapse
If you press that button, the Lumia turns into an iPhone 5
alodar1 said:
If you press that button, the Lumia turns into an iPhone 5
Click to expand...
Click to collapse
Better not touch it than hahaha
Thanks guys, by removing that little sticker thing though, that wouldn't affect warranty would it? I didn't touch anything below it..
That's cool they made it easily serviceable though!
Zhariak said:
Better not touch it than hahaha
Thanks guys, by removing that little sticker thing though, that wouldn't affect warranty would it? I didn't touch anything below it..
That's cool they made it easily serviceable though!
Click to expand...
Click to collapse
Actually.....it could void your warrently....if they checked that. Removing stickers on a handset is usually an indicator of a stay away area near hear...stay away.....
When they swapped by phone last week because of the vibrator....they definitely opened the sim slot and looked in...I had no idea why....but I do now.
Zhariak said:
Better not touch it than hahaha
Thanks guys, by removing that little sticker thing though, that wouldn't affect warranty would it? I didn't touch anything below it..
That's cool they made it easily serviceable though!
Click to expand...
Click to collapse
Removing the sticker is what lets them know that you voided the warranty.
Megabunny said:
You wouldn't start poking around inside of your TV if you found a small hole.
Click to expand...
Click to collapse
Actually, I would. It's no wonder my parents got grey hair so quickly.
Zhariak said:
Better not touch it than hahaha
Thanks guys, by removing that little sticker thing though, that wouldn't affect warranty would it? I didn't touch anything below it..
That's cool they made it easily serviceable though!
Click to expand...
Click to collapse
Some stickers....whenyou remove them....say VOID VOID VOID. All you can say is OPPS OPS OPS OPS...because the they are 1 way stickers...usually....won't go back on.
Want to know whats under the sticker....go to YouTube and find the break down video....
Weird,
I removed the sticker a few times to look in, until finally posting this, each time I was able to put it back. It's NOT one of those tamper proof stickers, it just covers that hole...
Zhariak said:
Weird,
I removed the sticker a few times to look in, until finally posting this, each time I was able to put it back. It's NOT one of those tamper proof stickers, it just covers that hole...
Click to expand...
Click to collapse
This thread did make me go look. got the flash light out, the reading glasses, I'm looking inside there....and boom....I see the darn this right on the top. First glance....this is a "You void your warrenty" type of sticker. But thats my opinion. The one of the Dell Venue Pro was black and barely noticable...until you pull it back and it left its surprise.....but then you were looking for the SD card....
Strange...but cool to know.
I have to admit, the same day the YouTube video came up showing how to dismantle the phone, I went ahead and did it. It's pretty slick the way it's held together.
I wanted to see how the Vibrator Motor was installed to see if there was a good reason for the rattle and possibly a fix. Unfortunately, it's under the Main Board, and I was not that enthusiastic, so never got to see it. But I can confirm it's the Motor, or something close to it, and NOT the camera lense. I ran the vibrator while the phone was open so I could find the source. Again, it's under the Main Board, so could not see the actual rattle source.
I'm wondering if it might be one of the metal plates that clip on to cover the IC Chips, thus the different rattle on different phones. All the other parts seem to be solidly mounted.
PS: From what I can tell, there's no sign that the sticker had been lifted after I put it back in place.
SuperSport said:
I have to admit, the same day the YouTube video came up showing how to dismantle the phone, I went ahead and did it. It's pretty slick the way it's held together.
I wanted to see how the Vibrator Motor was installed to see if there was a good reason for the rattle and possibly a fix. Unfortunately, it's under the Main Board, and I was not that enthusiastic, so never got to see it. But I can confirm it's the Motor, or something close to it, and NOT the camera lense. I ran the vibrator while the phone was open so I could find the source. Again, it's under the Main Board, so could not see the actual rattle source.
I'm wondering if it might be one of the metal plates that clip on to cover the IC Chips, thus the different rattle on different phones. All the other parts seem to be solidly mounted.
PS: From what I can tell, there's no sign that the sticker had been lifted after I put it back in place.
Click to expand...
Click to collapse
I might do this when its out of warranty.... too knew yet to blow that!
Today, I dropped my S3 from about waist height bottom down, and the camera lens cracked. First of all, I'm extremely disappointed as it never fell from very high, AND it was momentarily suspended by my headphone cord before hitting the ground. Terrible. Anyways, I'm looking to buy a replacement part for the cracked lens, but am unsure of a few things.
What replacement part am I supposed to buy exactly? Looking through eBay, I saw a part that costs about $15 which replaces like the whole entire plastic back (underneath the battery case), including the camera lens. I also saw a replacement part for the entire camera itself which was about $45. Which one do I get (Please say the $15 one)? Also, does it matter if the part says it's built for the i9300 model? Or is it the same as our T999 one? Thanks a lot for your help.
Oh, if anyone knows anything about whether or not I can get the part warrantied by Mobilicity or Samsung, please let me know.
Amartier said:
Today, I dropped my S3 from about waist height bottom down, and the camera lens cracked. First of all, I'm extremely disappointed as it never fell from very high, AND it was momentarily suspended by my headphone cord before hitting the ground. Terrible. Anyways, I'm looking to buy a replacement part for the cracked lens, but am unsure of a few things.
What replacement part am I supposed to buy exactly? Looking through eBay, I saw a part that costs about $15 which replaces like the whole entire plastic back (underneath the battery case), including the camera lens. I also saw a replacement part for the entire camera itself which was about $45. Which one do I get (Please say the $15 one)? Also, does it matter if the part says it's built for the i9300 model? Or is it the same as our T999 one? Thanks a lot for your help.
Oh, if anyone knows anything about whether or not I can get the part warrantied by Mobilicity or Samsung, please let me know.
Click to expand...
Click to collapse
Link?
The device should still be under warranty and they will charge for it.
The back part for $15 would be your best get if it's only the glass that is cracked. I wouldn't buy the whole camera piece since it's built for a different chipset.
http://www.ebay.ca/itm/Original-CAMERA-LENS-Cover-Bezel-CHASSIS-Samsung-Galaxy-S3-i9300-black-/280969953710?pt=PDA_Accessories&hash=item416b1d41ae
http://www.ebay.ca/itm/Replacement-Back-Camera-Lens-Flex-Cable-Tool-Samsung-i9300-Galaxy-S3-ZVFC497-/380464898667?pt=LH_DefaultDomain_0&hash=item589579a26b
Thanks for the reply. Do you think it's under Samsung or carrier warranty?
If you bought insurance, it would be. Samsung would probably ask you to send it to their svc center to get an estimate but that means time without the phone.
p.s. no case on the phone?
****e, didn't do anything like that. :/ Looks like I'm stuck with self repair. I didn't have a case because I wasn't expecting it to break that easily.. I remember having the HTC Incredible S and dropping it on purpose to show people how durable it was.
Just to clarify, that $15 plastic part will have a new camera glass?
Amartier said:
****e, didn't do anything like that. :/ Looks like I'm stuck with self repair. I didn't have a case because I wasn't expecting it to break that easily.. I remember having the HTC Incredible S and dropping it on purpose to show people how durable it was.
Just to clarify, that $15 plastic part will have a new camera glass?
Click to expand...
Click to collapse
Sorry to hi-jack your thread, but i'm curious about the same replacement piece..
can anyone confirm the entire piece from the i9300 will fit the t999 with no issue? they look pretty much identical
I just messaged the eBay seller of the chassis replacement part. I can confirm that it comes with a lens cover to replace the cracked one. When I was watching the teardown video for the GS3, I saw that the part I want to replace has 3G/Network connectors on it. If the international part is used as a replacement part, our phone's might not work since the two variants use different network frequencies and all.
Amartier said:
I just messaged the eBay seller of the chassis replacement part. I can confirm that it comes with a lens cover to replace the cracked one. When I was watching the teardown video for the GS3, I saw that the part I want to replace has 3G/Network connectors on it. If the international part is used as a replacement part, our phone's might not work since the two variants use different network frequencies and all.
Click to expand...
Click to collapse
I also have a Galaxy S3 that I dropped today, cracking the back-side lens cover. My phone is an AT & T version, 4G. I'm not sure what "connectors" have to do wiith taking pictures, but does it look like the part described WON'T work for my 4G phone? Please advise.
CalifWoman said:
I also have a Galaxy S3 that I dropped today, cracking the back-side lens cover. My phone is an AT & T version, 4G. I'm not sure what "connectors" have to do wiith taking pictures, but does it look like the part described WON'T work for my 4G phone? Please advise.
Click to expand...
Click to collapse
The connectors have nothing to do with taking pictures, as the replacement part replaces just the camera glass. I'm just afraid that data will stop working properly or something like that if the connectors aren't right.
Anybody else has a visible gap between the glass and metal casing at the top edges of the phone? It is big enough to collect dust and is present on the front and the back of the phone. Galaxy S20.
Vidicgapi said:
Anybody else has a visible gap between the glass and metal casing at the top edges of the phone? It is big enough to collect dust and is present on the front and the back of the phone. Galaxy S20.
Click to expand...
Click to collapse
that gap is for the earpiece speaker.
mangdionisio said:
that gap is for the earpiece speaker.
Click to expand...
Click to collapse
I said at the edges of the top not the center. Also in the front and back.
Vidicgapi said:
I said at the edges of the top not the center. Also in the front and back.
Click to expand...
Click to collapse
Do you have a photo? The only gap I have is the middle top part of the phone for earpiece. The rest is same with the rest of the phone, down the sides and to the bottom of the phone.
Mine is a s20+ though
Sent from my SM-G985F using Tapatalk
I hope it is visible enough
Looks like you haven't cleaned your phone since the day you bought it with all that dust on it. Get a microfiber cloth and Zeiss eye glass cleaner which is safe for all eye glass coatings so it also safe for your phone. Then put it in a good case. I use the 3 piece OtterBox Defender Pro which also comes with a holster. No case is just begging for disaster to happen the first time you lose your grip and drop that thing on the floor. If it's in a case there won't be any dust getting in the cracks because it won't be exposed.
Didn't buy a pretty phone to put it in a fat ass case.
Vidicgapi said:
Didn't buy a pretty phone to put it in a fat ass case.
Click to expand...
Click to collapse
Hope you got Premium are or some other insurance. Good Luck!
Got the same gap on my S20 Ultra LTE Black version which I purchased yesterday :-
My S10+ also had same gap on exactly same location, Link of the topic : https://forum.xda-developers.com/s10-plus/help/gap-left-corner-s10-t3935197
So samsung also have bad quality control now.
This is the reply I received from Samsung :-
Of course he gonna say that's fine XD I worked for samsung customer care and we had briefings where they told us always to push the narrative that's it's fine so we get the least amount of RMA's.
I cannot fit a fingernail between mine, definitely not part of the design
There is a thick gasket inside there which will raise the glass.
Sent from my MI MAX 3 using Tapatalk
So is it still safe from water and dust or ? I have noticed dust going in that gap but they are just stuck there. Been trying with the service center since few days for getting a DOA but there is a very low chance to get it. Even my S10+ which I bought last year had exactly same gap at exactly same location.. maybe something wrong with the manufacturing. Idk how they could manufacture two different phones purchased/manufactured in a gap of 1 year.
Pr0Ankit said:
This is the reply I received from Samsung :-
Click to expand...
Click to collapse
That's a generic answer that makes absolutely no sense. If that were the case than all the phones would have a gap.
If you can I would return it and exchange for a new phone.
I have no possiblity to return it to store and get a replacement. None of the offline authorized resellers for any smartphone brand in my country have a replacement policy. I went to the service center but they just sent the snapshots of the gap to their HQ for a RMA and told me that they will call me back within 48 hours with the response of their seniors, however I received no response from the service center yet, its been more than 72 hours. I had already sent an email to Samsung India CEO's Desk and they are following up my case with the service center but I think that it's all just their drama.. they are very reluctant to not issue a RMA for such an expensive phone. I wish I hadnt switched from Apple to Samsung knowingly that there will be 90% chance that all my Samsung phones purchased after 2018 had gaps.
Mine doesnt seem to have that gap or at least it is not as visible, i have black color - if your screen uniformity is acceptable i wouldnt risk replacing phone as you may get one with poor uniformity and that is then a problem
I looked at mine, also grey, it is not like yours.. the gaps is al the same, corners the side, bottom and top.
So I don't think yours is part of the design.
Maybe it wasn't enough to fail at there inspection but I wouldn't be happy with that.
Yeah it seems like that, + the black colour makes the gap look more wider. I have submitted my device to service center yesterday along with the box, bill and accessories. They said that they will be processing the DOA and issue me the certificate today to get a replacement from store. If possible I will try to get a Gray variant this time.
Hello,
Does anyone know what this grey/graphite sticker is for on the inside of the back cover, picture attached...
mattyxkrist said:
Hello,
Does anyone know what this grey/graphite sticker is for on the inside of the back cover, picture attached...
Click to expand...
Click to collapse
A couple of speculatory guesses.
First is maybe a pad of some sort meant for holding down or stabilizing something.
Another possibility is it maybe for heat dissipation, but after looking at teardown videos I have doubts that is what it's for.
My guess is it is part of a separate water proofing "chamber" which houses sim/sdcard and probably the mics too....
Sent from my [device_name] using XDA-Developers Legacy app
Thx for replies, I forgot to mention that the exact same sticker is on the underneath of the battery behind in line where the fingerprint reader is, maybe it's shielding? I'm not sure if it needs it though, most of the glass back door panels sold don't have it on
mattyxkrist said:
Thx for replies, I forgot to mention that the exact same sticker is on the underneath of the battery behind in line where the fingerprint reader is, maybe it's shielding? I'm not sure if it needs it though, most of the glass back door panels sold don't have it on
Click to expand...
Click to collapse
It needs it. Those ones don't come with it probably because you're supposed to keep your original one? Not sure. But the best bet is, if something is there, it's there for a reason and it should stay there. :good: