Develop Bugs

ARHD 9.3.1 Install Hang

Am attempting to flash ARHD 9.3.1 from a rooted UK vodafone HTC One X.
Have exactly followed install instructions and reviewed utube video of process:
- Flashed new boot.img using fastboot and erased cache
- Use recovery to run super wipe
- Used recovery to run ARHD installer.
Did bog standard install from installer (did not enable any optional optimisations).
Installer then reboots phone.
Phone reaches white boot screen with "htc one" in middle and "beats audio" at bottom
and hangs.
Read from ARHD thread that can take some time for initial boot, but have left phone
for up to 20 minutes and is still stuck so looks pretty permanent to me. Have repeated
process at least twice, in case missed something. Still same hang.
Any ideas here?

steveoss said:
Am attempting to flash ARHD 9.3.1 from a rooted UK vodafone HTC One X.
Have exactly followed install instructions and reviewed utube video of process:
- Flashed new boot.img using fastboot and erased cache
- Use recovery to run super wipe
- Used recovery to run ARHD installer.
Did bog standard install from installer (did not enable any optional optimisations).
Installer then reboots phone.
Phone reaches white boot screen with "htc one" in middle and "beats audio" at bottom
and hangs.
Read from ARHD thread that can take some time for initial boot, but have left phone
for up to 20 minutes and is still stuck so looks pretty permanent to me. Have repeated
process at least twice, in case missed something. Still same hang.
Any ideas here?
Click to expand...
Click to collapse
Just to be sure: You´re on the latest Version from Recovery? Have you checked the MD5 from your downloaded zip?

blahquader said:
Just to be sure: You´re on the latest Version from Recovery? Have you checked the MD5 from your downloaded zip?
Click to expand...
Click to collapse
Yes checked the md5 of both the rom and the boot image (at least the rar containing it).
For the extracted boot.img i get:
9d5548cd6e0a79a3baefb7ce631674d2 boot.img
I see 9.3.2 has just been dropped, will give this a try.

steveoss said:
Yes checked the md5 of both the rom and the boot image (at least the rar containing it).
For the extracted boot.img i get:
9d5548cd6e0a79a3baefb7ce631674d2 boot.img
I see 9.3.2 has just been dropped, will give this a try.
Click to expand...
Click to collapse
Hello, this happened to me several times. Solved it each time by taking the long aproach and doing a full wipe again (use Mike's Super Wipe - see first page). Also flash the boot.img once again just to be on the safe side.
Sent from my HTC One X using xda premium

oftiklaus said:
Hello, this happened to me several times. Solved it each time by taking the long aproach and doing a full wipe again (use Mike's Super Wipe - see first page). Also flash the boot.img once again just to be on the safe side.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Tried the 9.3.2 release and did an additional reflash/cache clear before initial boot
and all worked fine this time. Sorted :good:

I have the same problem. My phone keep rebooting.
I've installed wiped the cache installed the boot.img again used Super whipe and then flashed the ROM again. But my phone keeps rebooting.
any clue?

johnsten said:
I have the same problem. My phone keep rebooting.
But my phone keeps rebooting.
any clue?
Click to expand...
Click to collapse
You mean boot loop ??

yes

johnsten said:
yes
Click to expand...
Click to collapse
Try wiping cache and dalvik cache then flash boot.img then super wipe and flash the ROM all over again ... Made it out once by doing this ...

Both CM9/CM10 hangs at boot.

My procedure in chronological order:
Flashed recovery TWRP 2.3
Wiped everything possible in the wipe-tab
Installed CM9/10 from zip on SD-card (zip contains META-INF, system and boot.img)
Flashed boot.img from the zip file CM9/10
Issued the command fastboot erase cache
Unplugged cable and reboot
What happens is that I am stuck at the HTC booting screen. I have been here for about 30-40 minutes. If I try any adb shell command I receive this error: - exec '/system/bin/sh' failed: No such file or directory (2) -. Clearly, something is not right here. I will not speculate because I lack the knowledge to do so. Any help is appreciated because I have been phone-less for a day now and it is getting irritating. Thanks!

Seems you did everything correctly.
Try to flash via ClockWorkMod recovery.
Sent from my HTC One X

TToivanen said:
Seems you did everything correctly.
Try to flash via ClockWorkMod recovery.
Click to expand...
Click to collapse
I just did the same procedure as before but with clockworkmod instead. Still hung at booting screen. I get the same error as before. Is root access a must? I have not done any exploit, only thing I have done is unlocked my boot loader at HTCDev.

zettez said:
I just did the same procedure as before but with clockworkmod instead. Still hung at booting screen. I get the same error as before. Is root access a must? I have not done any exploit, only thing I have done is unlocked my boot loader at HTCDev.
Click to expand...
Click to collapse
Root should not be needed since most roms are rooted by default.
Did you flash gapps?

TToivanen said:
Root should not be needed since most roms are rooted by default.
Did you flash gapps?
Click to expand...
Click to collapse
No, I have not. Maybe I should give it a try? Or is it not required? Should I not be able to start the phone without any gapps?
Do you by chance have any ROM you can recommend that works so I could try it out and exclude problems? Would very like to know if it is my phone or ROM that is buggy.

It should boot without them, but better to give it a try.
Ironically, I've been using CM10 for more than a month now and never had any problems booting.
Sent from my HTC One X

If you have an hboot newer than 1.12 you need a different boot.img, check the bottom if the ROM OP.

TToivanen said:
It should boot without them, but better to give it a try.
Ironically, I've been using CM10 for more than a month now and never had any problems booting.
Click to expand...
Click to collapse
Would you mind telling me which CM10 build you are using and which boot.img you flashed?

BenPope said:
If you have an hboot newer than 1.12 you need a different boot.img, check the bottom if the ROM OP.
Click to expand...
Click to collapse
I have hboot 1.3 or something I think. I downloaded the different builds at get.cm. Where can I get the boot.img if not the one in the zip file? Do you mean whichever thread that CM have posted themselves here on xda? Would you mind sending a link to where I can find the boot.img?

zettez said:
I have hboot 1.3 or something I think. I downloaded the different builds at get.cm. Where can I get the boot.img if not the one in the zip file? Do you mean whichever thread that CM have posted themselves here on xda? Would you mind sending a link to where I can find the boot.img?
Click to expand...
Click to collapse
Normally it would be found in the bottom of CM10 threads OP but the link is down.
Here you go:
http://forum.xda-developers.com/showpost.php?p=34829297&postcount=9173
Remember to repack it with the one found in zip. Repack tool stickied on android development forum.
Sent from my HTC One X

TToivanen said:
Normally it would be found in the bottom of CM10 threads OP but the link is down.
Here you go:
http://forum.xda-developers.com/showpost.php?p=34829297&postcount=9173
Remember to repack it with the one found in zip. Repack tool stickied on android development forum.
Click to expand...
Click to collapse
Thanks, but still a no go. What I did was take the modified boot from your link and the boot.img from the zip file, do the online converter as stickied on the forum, then did the procedure all again but this time I flashed the new boot.img I got from combining the old and the new boot.img. Still hangs at boot. Very annoying. I am currently using a modified stock ROM and I dislike it very much.

Hey,
I have exactly the same issue. I've unlocked my bootloader using the method as specified by htcdev.com. Then I flashed the newest CWM recovery. But if I flash any ROM, I'm stuck at its boot animation. However if I then unzip the boot.img from the ROM, and flash that (fastboot flash boot boot.img), my phone won't boot past HTC screen. Even erasing the cache didn't help (fastboot erase cache).
I've restored the stock ROM using the RUU, however during the process something went wrong and it formatted my sd-card. So I'm stuck with the stock ROM, without any applications or data.
Can anybody help me flash CM10?
My Hboot version is 1.36.0000
And I'm trying to flash the cm-10-20121210-NIGHTLY-endeavoru.zip ROM.
Thanks in advance
Han

irundaia said:
Hey,
I have exactly the same issue. I've unlocked my bootloader using the method as specified by htcdev.com. Then I flashed the newest CWM recovery. But if I flash any ROM, I'm stuck at its boot animation. However if I then unzip the boot.img from the ROM, and flash that (fastboot flash boot boot.img), my phone won't boot past HTC screen. Even erasing the cache didn't help (fastboot erase cache).
I've restored the stock ROM using the RUU, however during the process something went wrong and it formatted my sd-card. So I'm stuck with the stock ROM, without any applications or data.
Can anybody help me flash CM10?
My Hboot version is 1.36.0000
And I'm trying to flash the cm-10-20121210-NIGHTLY-endeavoru.zip ROM.
Thanks in advance
Han
Click to expand...
Click to collapse
You cannot use the boot.img that comes with the zip out of the box if you have Hboot 1.36. What you have to do is repack it, taking the boot.img from the zip file and then a modified boot.img here http://forum.xda-developers.com/show...postcount=9173 (thanks TToivanen), then as I understood it, repack it for instance here http://forum.xda-developers.com/showthread.php?t=1815607, download the repacked boot.img and flash that.
With that said, I could not get it running but it might be something wrong with my phone. Please try this out and tell me if it works or not so I may start to conclude where the error lies.

zettez said:
Thanks, but still a no go. What I did was take the modified boot from your link and the boot.img from the zip file, do the online converter as stickied on the forum, then did the procedure all again but this time I flashed the new boot.img I got from combining the old and the new boot.img. Still hangs at boot. Very annoying. I am currently using a modified stock ROM and I dislike it very much.
Click to expand...
Click to collapse
Sorry, but all I can say is that you did a mistake at some point.
Try installing again with full wipe and remember to wipe cache and dalvik.
You are referring to the official CM10 and not Trip's or any other builds right?

TToivanen said:
Sorry, but all I can say is that you did a mistake at some point.
Try installing again with full wipe and remember to wipe cache and dalvik.
You are referring to the official CM10 and not Trip's or any other builds right?
Click to expand...
Click to collapse
Will try again. I got the latest build from http://get.cm/?device=endeavoru. Will try cm-10-20121213-NIGHTLY-endeavoru.zip as it came out today.

zettez said:
You cannot use the boot.img that comes with the zip out of the box if you have Hboot 1.36. What you have to do is repack it, taking the boot.img from the zip file and then a modified boot.img here http://forum.xda-developers.com/show...postcount=9173 (thanks TToivanen), then as I understood it, repack it for instance here http://forum.xda-developers.com/showthread.php?t=1815607, download the repacked boot.img and flash that.
With that said, I could not get it running but it might be something wrong with my phone. Please try this out and tell me if it works or not so I may start to conclude where the error lies.
Click to expand...
Click to collapse
I did that and now my phone is still stuck on the HTC screen. Trying to restore my backup of the stock ROM atm.
---------- Post added at 04:35 PM ---------- Previous post was at 04:30 PM ----------
hmm the backup was useless... Off to the RUU it is....

irundaia said:
[/COLOR]hmm the backup was useless... Off to the RUU it is....
Click to expand...
Click to collapse
You flashed the stock boot.img before restoring?

irundaia said:
I did that and now my phone is still stuck on the HTC screen. Trying to restore my backup of the stock ROM atm.
Click to expand...
Click to collapse
I see, then it is not only I who have this problem.
And a heads up, if the backup would go wrong, I currently use this ROM and it works pretty good if you want stock or cannot be arsed to get a root exploit for the stock ROM. http://forum.xda-developers.com/showthread.php?t=2035203.
Would be great if anyone has any ideas why irundaia and I cannot make CM10 work?

TToivanen said:
You flashed the stock boot.img before restoring?
Click to expand...
Click to collapse
You're right, I forgot to do that. I does boot now, still at a loss though. Can't we downgrade our Hboot to a version in which we know that CM can be flashed?

Kinda out of ideas here...
Can you confirm that the boot.img flashes ok? (should say OKAY)
Also confirm that you have endeavoru and not evita.

HTC Desire Hd won't start after updating Jellytime

Hay guys,
for my Desire HD i use the custom rom Jellytime. I used the r6.2, then i flashed an update.zip to r7.
But then i realized, bluetooth is not working and i'm not connected to my google account. So i decided to downgrade to r6.2, so i flashed the .zip as an update.zip. now my phone freezed after the jellytime bootlogo :/
I tried to get to the recovery but when i press power+ volume down, it vibrates 3 times and nothing happens.
does anybody knows what to do? I have a backup, so are there any possibilities, to restore the backup?
slixx

Ouch, did you flash the ROM as an update.zip or the backup?? And what recovery do you got?

hay,
i flashed the r7 as an update.zip, to update my custom rom from r6.2 to r7. and i also flashed the r6.2 as an update.zip to downgrade
I think this was my fault.
i have the lastes version i think - something like 5.0.1.20.

okay,
i used the adb to boot into the bootloader. with the bootloader i booted into the recovery, know i try to restore my backup.
hope it works!

Report back with your progress.
EDIT: and save yourself some trouble next time by using recovery instead of bootloader for installing ROMs

It worked!
i restored the backup, after this i installed an older version of jellytime, flashed gapps, and restored my personal stuff with google
i didn't flashed the rom with the bootloader. i just forgot to flash gapps, after installing the jellytime update ._.
this was the reason why i was not connected to my google account. and the bluetooth function...hmm i dont care cause i don't use it.
but now everything is okay again.

BTW, if you feel like getting back to jelly time, I recommend using v30, or the last 4.1.2 version of jelly time. I think it was only until v9 that jellytime started getting stable, and v30 should be almost bug free.
Sent from my Inspire 4G using xda app-developers app

black screen after update of Jellytime was installed
I flashed in recovery , formatted and all that and picked up the zip of jellytime all installation steps worked fine and once finsihed and the phone was going to finally reboot it just turned black and didn't continue.
HOw do I resolve this? How can I do my backup ? Right now my phone is useless so appreciate a fast answer
Regards
Toby

ektob said:
I flashed in recovery , formatted and all that and picked up the zip of jellytime all installation steps worked fine and once finsihed and the phone was going to finally reboot it just turned black and didn't continue.
HOw do I resolve this? How can I do my backup ? Right now my phone is useless so appreciate a fast answer
Regards
Toby
Click to expand...
Click to collapse
Do you have an unlock bootloader? If so, have you flashed the boot.img in fastboot?

glevitan said:
Do you have an unlock bootloader? If so, have you flashed the boot.img in fastboot?
Click to expand...
Click to collapse
If you mean I am rooted - yes I am. I had the IceColdSandwich before I tried to flash this CM10 JellyTime. I'm not sure I did the fastboot. I did a clean wipe and selected the update rom zip and then followed the steps, inlcuding selecting Desire S and flash (normal?) . It ran through all the installation steps without problems, but when finsihed and during the reboot it hanged (black screen).

ektob said:
If you mean I am rooted - yes I am. I had the IceColdSandwich before I tried to flash this CM10 JellyTime. I'm not sure I did the fastboot. I did a clean wipe and selected the update rom zip and then followed the steps, inlcuding selecting Desire S and flash (normal?) . It ran through all the installation steps without problems, but when finsihed and during the reboot it hanged (black screen).
Click to expand...
Click to collapse
I didn't ask about root, did I? I made 2 simple questions that have not been answered

glevitan said:
I didn't ask about root, did I? I made 2 simple questions that have not been answered
Click to expand...
Click to collapse
So responding a bit more politely;
Do you have an unlock bootloader? To unlock a bootloader is mlostly resolved by doing a root. That I have done so yes in that case I do have a unlocked bootloader. Please correct me if I am wrong in conclusion.
If so, have you flashed the boot.img in fastboot? I am not sure in this. I think I was give two choices - fast boot and normal boot. I selected normal boot.

ektob said:
So responding a bit more politely;
Do you have an unlock bootloader? To unlock a bootloader is mlostly resolved by doing a root. That I have done so yes in that case I do have a unlocked bootloader. Please correct me if I am wrong in conclusion.
Click to expand...
Click to collapse
You are wrong in your conclusion.

bananagranola said:
You are wrong in your conclusion.
Click to expand...
Click to collapse
OK..fine. Still I'm sure I'm unlocked. Now I acctally got the bootloader working - ACE PVT ENG S-OFF RL . So I read your link - thanks it seemed valuable but I didn't get why I needed to open a terminal window (dos window I assume) secondly it didn't work at all since the usb connection didn't connect properly.. I'm sorry for being such a hassle.. . I did before though un zip the folders so if needed - where should the boot image be in order for it to load from the sd card ?
Thanks for the patience
EDIT: I tried to follow the flashboot steps as best I could, but failed to load the image.

ektob said:
ACE PVT ENG S-OFF RL
Click to expand...
Click to collapse
Then you are not unlocked!! I give up.

bananagranola said:
Then you are not unlocked!! I give up.
Click to expand...
Click to collapse
Whatever - I didn't stop me from installing other ROMs. This case is now closed - I changed ROM to CodefireX - worked fine. But sure I will look into it if its necessary - for sure for Jellytime..
I must say you guys really tried to help but any reasons to why I have to unlock bootloader - is that something that have become necessary over time? Maybe its also bad instructions on the ROMS main pages? Why do I need to search 50 different forums to get a simple answer?
Anyway you can give up on me now because I resolved it on my own. Thanks

Because there are additional steps if you are unlocked...

Unable to flash OS to HTC One X

Hi XDA,
I decided to install CM 11 on my HTC, and so I unlocked the bootloader, and I then rooted it. I also updated my HBOOT to 1.39. After this I installed CWM and backed up, and attempted to flash the latest CM for the One X. Firstly I had an issue with the status 7 error, but managed to overcome that by updating my CWM (Now running 6.0.4.7 Touch Recovery). At the moment I do not have an OS, and all attempts to flash a new ROM are successful, however when I reboot I am still stuck at a frozen boot screen. ("HTC. Quietly Brilliant"). Even restoring my backup doesn't work.
Any help would be much appreciated.
Apologies if this is in the wrong section.
Thank you

JamesNZ7 said:
Hi XDA,
I decided to install CM 11 on my HTC, and so I unlocked the bootloader, and I then rooted it. I also updated my HBOOT to 1.39. After this I installed CWM and backed up, and attempted to flash the latest CM for the One X. Firstly I had an issue with the status 7 error, but managed to overcome that by updating my CWM (Now running 6.0.4.7 Touch Recovery). At the moment I do not have an OS, and all attempts to flash a new ROM are successful, however when I reboot I am still stuck at a frozen boot screen. ("HTC. Quietly Brilliant"). Even restoring my backup doesn't work.
Any help would be much appreciated.
Apologies if this is in the wrong section.
Thank you
Click to expand...
Click to collapse
Have you flashed boot.img?

mr93 said:
Have you flashed boot.img?
Click to expand...
Click to collapse
I haven't, no. Is this unzipping the rom and then flashing the .img?

Yeah take out the boot.img indeed and flash it via fastboot

Mr Hofs said:
Yeah take out the boot.img indeed and flash it via fastboot
Click to expand...
Click to collapse
Aaaahhh THANK YOU SO MUCH !!! Working beautifully!!
Such a simple solution.

mr93 said:
Have you flashed boot.img?
Click to expand...
Click to collapse
Thanks a billion !!

[Q] Unable to Install ViperX JB ROM

Hi All,
Right now I am with the below ROM.
http://forum.xda-developers.com/htc...nofficial-htc-one-x-cyanogenmod-12-0-t2976389
I want to go back to ViperX where when I gave a try, this ROM is not getting installed.
Please help me out.
Regards,
Vineel.

popcee.p said:
Hi All,
Right now I am with the below ROM.
http://forum.xda-developers.com/htc...nofficial-htc-one-x-cyanogenmod-12-0-t2976389
I want to go back to ViperX where when I gave a try, this ROM is not getting installed.
Please help me out.
Regards,
Vineel.
Click to expand...
Click to collapse
new layout or old lyout. If you are on the NL just flash Viper for the NL if you are on the OL flash the old one

Thant said:
new layout or old lyout. If you are on the NL just flash Viper for the NL if you are on the OL flash the old one
Click to expand...
Click to collapse
I did this earlier. This time what I did is -
1. Installed Recovery tool.
2. Flashed ViperX but this is not getting flashed.
Dont know the problem.
How to achieve this.
Right now I am on New Layout. Shall I use this new Layout to flash ViperX?

popcee.p said:
I did this earlier. This time what I did is -
1. Installed Recovery tool.
2. Flashed ViperX but this is not getting flashed.
Dont know the problem.
How to achieve this.
Right now I am on New Layout. Shall I use this new Layout to flash ViperX?
Click to expand...
Click to collapse
yes use New Layout viperx rom and follow these steps
1. wipe cache , dalvik cache and clear data
2.flash the viperxNL.zip using twrp
3.and then go to fastboot mode and flash the boot.img using fastboot flash boot boot.img
4.and then restart the phone

onex master said:
yes use New Layout viperx rom and follow these steps
1. wipe cache , dalvik cache and clear data
2.flash the viperxNL.zip using twrp
3.and then go to fastboot mode and flash the boot.img using fastboot flash boot boot.img
4.and then restart the phone
Click to expand...
Click to collapse
Thanks for the message mate.
Would you please help me out with the Links to download ViperXNL.zip and twrp for this....
Regards,
Vineel.

popcee.p said:
Thanks for the message mate.
Would you please help me out with the Links to download ViperXNL.zip and twrp for this....
Regards,
Vineel.
Click to expand...
Click to collapse
I got this Link.
http://forum.xda-developers.com/showpost.php?p=59994171&postcount=306
Do you want me to follow the above mentioned steps to do this after downloading all necessary files?
Regards,
Vineel.

popcee.p said:
I got this Link.
http://forum.xda-developers.com/showpost.php?p=59994171&postcount=306
Do you want me to follow the above mentioned steps to do this after downloading all necessary files?
Regards,
Vineel.
Click to expand...
Click to collapse
Yep
And hit the thanks button if help

onex master said:
Yep
And hit the thanks button if help
Click to expand...
Click to collapse
I downloaded Viperx-NL and twrp v2.8.5.3. Big.
Flashed TWRP.
Found 2 drivers of HOX and filled it with zip files of ROM and Gapps.
Then I tried flashing ROM. It asked me some steps to followed and I did and suddenly phone got Switched Off and got ON and Hanged on HTC logo.
Again I performed this and ROM installation was successful and it asked me to reboot. I said yes. Mobile again hanged on HTC Logo. So I tried to flash Boot image file given by you separately. It didnt worked out.
Again I tried flashing ROM. It asked me some steps to followed and I did and suddenly phone got Switched Off and got ON and Hanged on HTC logo.
The Zip files got disappeared totally and my system is not able to detect the mobile 2 drivers.
Please help me.

popcee.p said:
I downloaded Viperx-NL and twrp v2.8.5.3. Big.
Flashed TWRP.
Found 2 drivers of HOX and filled it with zip files of ROM and Gapps.
Then I tried flashing ROM. It asked me some steps to followed and I did and suddenly phone got Switched Off and got ON and Hanged on HTC logo.
Again I performed this and ROM installation was successful and it asked me to reboot. I said yes. Mobile again hanged on HTC Logo. So I tried to flash Boot image file given by you separately. It didnt worked out.
Again I tried flashing ROM. It asked me some steps to followed and I did and suddenly phone got Switched Off and got ON and Hanged on HTC logo.
The Zip files got disappeared totally and my system is not able to detect the mobile 2 drivers.
Please help me.
Click to expand...
Click to collapse
follow the steps you followed to change to new layout i.e flashing twrp again and a factory reset..blah..blah
then download ARHD NL .zip and flash it or skydragon.zip .. and dont forget to flash the boot.img in fastboot
Maybe there is some problem in the viperNL.zip ...

onex master said:
follow the steps you followed to change to new layout i.e flashing twrp again and a factory reset..blah..blah
then download ARHD NL .zip and flash it or skydragon.zip .. and dont forget to flash the boot.img in fastboot
Maybe there is some problem in the viperNL.zip ...
Click to expand...
Click to collapse
I love ViperX.
I want to use Old layout. I have TWRP 2.4.4.0 recovery. I flashed this but this is not functioning properly.
So I could not flash ViperX.
Suggest me the best way mate.

popcee.p said:
I love ViperX.
I want to use Old layout. I have TWRP 2.4.4.0 recovery. I flashed this but this is not functioning properly.
So I could not flash ViperX.
Suggest me the best way mate.
Click to expand...
Click to collapse
i would suggest you to stay on the new layout and flash arhd or other sense rom .
coz there are many benefits of new layout
as for viper rom the problem may be because of the aroma installer
could you tell me what all options you selected in aroma installer??

onex master said:
i would suggest you to stay on the new layout and flash arhd or other sense rom .
coz there are many benefits of new layout
as for viper rom the problem may be because of the aroma installer
could you tell me what all options you selected in aroma installer??
Click to expand...
Click to collapse
Aroma Installer???
I am not that techie mate. I don't even understood this question.

popcee.p said:
Aroma Installer???
I am not that techie mate. I don't even understood this question.
Click to expand...
Click to collapse
i am too not a techine i am just 17
when you flash viperNL.zip there will be a popup of aroma installer where it will ask you do a full wipe or continue without wiping
then it will ask you to de-sense the rom or not then which mods you want to install beats ..etc...the in the next screen it will ask if you want to remove any apk ...then at last it will flash the rom with the % increase in flashing the rom and after that do you want the logcat ..then the phone comes out of aroma installer back in the twrp menu ...
and for the viperNL i just found the trick ..here is the link to how to flash without any error
http://forum.xda-developers.com/htc.../storage-layout-hox-endeavoru-t3022358/page38 (post no 374)

onex master said:
i am too not a techine i am just 17
when you flash viperNL.zip there will be a popup of aroma installer where it will ask you do a full wipe or continue without wiping
then it will ask you to de-sense the rom or not then which mods you want to install beats ..etc...the in the next screen it will ask if you want to remove any apk ...then at last it will flash the rom with the % increase in flashing the rom and after that do you want the logcat ..then the phone comes out of aroma installer back in the twrp menu ...
and for the viperNL i just found the trick ..here is the link to how to flash without any error
http://forum.xda-developers.com/htc.../storage-layout-hox-endeavoru-t3022358/page38 (post no 374)
Click to expand...
Click to collapse
Yes. This I have seen. I did not selected anything. I just moved forward clicking Next. Suddenly phone got switched Off.
What do u suggest mate??
Thanks for the Info. Now I understood what Aroma Installer is.

popcee.p said:
Yes. This I have seen. I did not selected anything. I just moved forward clicking Next. Suddenly phone got switched Off.
What do u suggest mate??
Thanks for the Info. Now I understood what Aroma Installer is.
Click to expand...
Click to collapse
carefully read the link i have posted ..i know you will succeed flashing VIPERNL.ZIP
Happy flashing
Hit the thanks button if helped

onex master said:
carefully read the link i have posted ..i know you will succeed flashing VIPERNL.ZIP
Happy flashing
Hit the thanks button if helped
Click to expand...
Click to collapse
I am still trying but my system is not opening the two drives of HOX.

popcee.p said:
I am still trying but my system is not opening the two drives of HOX.
Click to expand...
Click to collapse
then you will have to go back to old layout and then again flash the new layout twrp
just follow the guide given by teemo to go back to old layout and then follow the new layout guide

onex master said:
then you will have to go back to old layout and then again flash the new layout twrp
just follow the guide given by teemo to go back to old layout and then follow the new layout guide
Click to expand...
Click to collapse
Will give a try right away...

popcee.p said:
Will give a try right away...
Click to expand...
Click to collapse
Trying to Install TWRP 2.8.1.0
Failed

The Problem is with ViperX- NL Zip file.
Does anyone help me with perfect ViperX-NL ROM file please...