[Q] Weird Issue with my S3 - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Hi there,
I have been having a very weird issue with my phone lately, I originally put a Simcard in my S3 and it happened to bend the Simcard reader pins. After purchasing a new model of the Simcard tray and getting it installed by a professional (OEM Part) It does not read my Simcard, instead it gives me a notifcation "Emergency Calls only" When putting the same Simcard into another same model (Samsung Galaxy s3 i747) It picks up a signal automatically. However, what is the weird issue is... When putting a bell/virgin simcard into my current phone it picks up a signal (Able to pickup calls & Send Messages) How can this be?
PS. I am almost certain this phone is Unlocked.
Thanks for your contributions.

Abdullah988 said:
Hi there,
I have been having a very weird issue with my phone lately, I originally put a Simcard in my S3 and it happened to bend the Simcard reader pins. After purchasing a new model of the Simcard tray and getting it installed by a professional (OEM Part) It does not read my Simcard, instead it gives me a notifcation "Emergency Calls only" When putting the same Simcard into another same model (Samsung Galaxy s3 i747) It picks up a signal automatically. However, what is the weird issue is... When putting a bell/virgin simcard into my current phone it picks up a signal (Able to pickup calls & Send Messages) How can this be?
PS. I am almost certain this phone is Unlocked.
Thanks for your contributions.
Click to expand...
Click to collapse
Check the APN settings and make sure they are set to your carrier.

DarthDerron said:
Check the APN settings and make sure they are set to your carrier.
Click to expand...
Click to collapse
Could this be the actual issue? Since I am using the "PETRO CANADA MOBILITY" Sim/Network, And it does run/associated on the "Rogers Wireless Network" When booting up my phone it does detect a "Petro Canada Mobility" network in the phone menu after searching. However when pressing on it, it fails by saying "No Service Detected" Then quickly re-searches and hooks up to "ROGERS WIRELESS" (Also Gives me 4G DATA connection) Rogers - which is the factory setting APN setting. However, when placing a call it tells "Mobile Network Unavailable" why does this seem not to be the case when I put in a Virgin Mobile sim or Bell Mobility simcard?
I will try to change the APN hopefully this well effect the outcome. :good:

Related

need help figuring this out with my sim

i have the gt-i9250 and i always used an at&t sim with it with out an issue, recently i wanted to switch to t-mobile (thinking the phone should be unlocked considering it was an international phone and was the yakjuxw than i flashed it to yakju which was wierd cause i had google wallet on it and it was working fine although i only thought it was compatible with takju, but anyway all and all i put it to the usa firmware of takju 4.0.4 not going to jellybean yet, but my issue is that i am not able to use the t-mobile sim card in it and i get this (look at screenshot where signal is) what does this mean and how come i cant get signal, when i go to settings and mobile networks it shows me the apn for t-mobile us but not selected so i select it than after i go to mobile networks and it shows t-mobile and at&t and when i click any of them they tell me its unable to connect and it cant connect to the network at this time, so what would this mean and how would i fix it so that i can use it with my t-mobile sim card, also i flashed the newer NA radio uglc1.
That is weird. It should work on either of them. It just means you have no signal. That is strange. You could've actually just popped the Sim right in. It didn't matter if you were using a ROM
Sent from my Galaxy Nexus using xda app-developers app
Is the SIM activated for sure? I know when I switched to the T-mobile $30 plan it took it a good 15 minutes or so to activate, and then I didn't actually get signal until rebooting the phone for whatever reason.
Did you reboot your phone?
Although you can sometimes hot plug a sim card by turning on flight mode, taking the sim card out and toggling flight mode a few times, it won't work sometimes.
probably your cell imei not free and therefore can not change your sim.
There is an application called "****docomo" worth to release the imei. Make a backup just in case
https://www.dropbox.com/s/mcg9gtn1ei85357/FuxkDocomoV3.1.apk
yosula said:
probably your cell imei not free and therefore can not change your sim.
There is an application called "****docomo" worth to release the imei. Make a backup just in case
https://www.dropbox.com/s/mcg9gtn1ei85357/FuxkDocomoV3.1.apk
Click to expand...
Click to collapse
Don't think he has a SIM unlock problem. Considering that it was working with AT&T, which never had a locked version of the GNex, I think he's having another issue.
I'd tell the OP to make 100% sure that his new T-Mobile SIM is activated and not defective, then try a few reboots and swaps back to the old SIM and do some troubleshooting. If it's the phone and not the SIM, its likely a mobile network registration error or an APN issue.
Looking in the notification bar, it seems like the phone doesn't think there's even a SIM inserted. Make sure you didn't damage a pin in the SIM tray, and that the SIM is properly inserted and clean. I don't think you'd get this error of "no SIM" if your phone was locked. If that was the case, the phone would recognize the SIM and prompt for an unlock code, which you're not getting.

[Q] insert sim card to access network services

Hi Guys.
So received the phone on Thursday, Friday I did a sim swap from my normal sized sim to a micro sim. I waited the whole day but the phone didn't have any network access.
Today when I woke up I I switched the phone on hoping that everything will be fine, thinking the simswap just hasn't gone through yet, still no network access. I took out the swim from the phone and switched with my ipad, the sim was working in the ipad, and the ipads sim also didnt give the phone network access.
In the top right corner it shows full bars in grey, cant make emergency calls or anyhting.
In the about section of the phone, I have ALL the details present, baseband version is there, kernel version is there.
In Status section, network is unkown, signal strenght is -83 dbm 15 asu, network type unkown, service state is out of service, and the rest is also present.
I thought the phone didn't properly register to a network, so went into settings - wireless networks - more settings - mobile networks, but it gives me a insert sim card message.
The phone is reading the simcard fine because it asked for the PIN when switching on.
When trying to make a call I get, it says "Not registered on network"..
So what am I to do? Vodacom can only pickup the phone and exchange it on Tuesday, so was hoping that this might just be a software issue that can be resolved by a flash.
I have tried resetting / hard resetting the phone numerous times.
Its the Note 2 N7105 LTE Version
Any help would be highly appreciated.
Wrong forum.

DINC2 unlocked but doesn't recognize SIM in Panama...help!!!

hi. i just got this phone in the states before coming down to panama. it is verizon, but i called them and they gave me the code and now the phone is unlocked....but i can't get coverage here in panama. i've tried sim cards from a few of the local operators and none of them seem to work. i sure hope someone can help....here's what i've done so far: (oh, pls b patient, i'm a bit of a technophobe)
-unlocked sim. phone gives me sim lock is disabled message....that means i'm good to go, right/
-set phone to gsm only mode.
-software is androaid version 2.3.4
verizon global services told me that everything was as it should be and that the phone should work w/ a local sim card so i'm not really sure where to turn to......hopefully someone here can help. verizon also told me that the phone should work on the frequencies here. i have a claro sim card, but have also tried movistar, digicel, and masmovil. i was told that they use either 850 or 1900.
so, i'm totally stumped. hopefully i'm missing something stupid....btw, tried the sim in other phones (from europe and panama) and it worked w/ them. don't think it's a hadrware problem, but am i missing something? is there a setting change? do i need some kind of software update?
thanks!
update- get cell phone reception w/ gps on
don't know if this will help anyone get to the bottom of this issue, but i realized that when i have the gps on, i get full bar coverage. unfortunately, i can't leave the app on in the background. this makes me think it could be a hardware issue....bad antenna? anyone have any ideas
Same problem
I have the same issue as OP. Got my phone sim unlocked, and it runs on SenseMOD-2012-05-18-225643 Android 4.0.4.
For once I did a factory reset, skipped verizon activation (can´t do and won´t work because I´m not in the USA and do not have a verizon SIM or service), set my network preference to GSM/WCDMA, and the network wasn´t working.
Rebooted, my network is identified as soon as it starts, but then it goes to "No Service". Try to search for network but my carrier does not appear.
Any help?
EDIT:
Playing around with the phone, setting GSM as your network and restarting the phone let me make phone calls. No internet though and the APN was configured correctly. The "E" symbol for the internet blinked once in a while, but never got service.
Also, playing around some more, got my phone to not recognize the network again by removing the SIM another time. This sucks.

Phone Stuck Showing "Searching / No Service"

Hello all. I purchased a edge+ today but whenever I insert a sim, the phone stays on searching. I made sure that I rebooted the device and I also tried re-seating the sim many times. I believe the device is unlocked and the imei/esn is in clean standing with T-Mobile. I tried a MetroPCS sim card and it stayed on searching, same thing happened with a Verizon sim. However when I inserted the T-Mobile sim, it sometimes says no service but ever since I rebooted the device, it stays on "searching" no matter which sim is installed. I find this whole ordeal frustrating since the signal bars show up for the MetroPCS and T-Mobile sim but with Verizon nothing happens. Any help would be greatly appreciated.
Yours is G928T? If yes, it does not support Verizon/Sprint even if it's unlocked.
Did you buy it off of Craigslist/Ebay? It might be blacklisted. checkesnfree.com
knite75 said:
Yours is G928T? If yes, it does not support Verizon/Sprint even if it's unlocked.
Did you buy it off of Craigslist/Ebay? It might be blacklisted. checkesnfree.com
Click to expand...
Click to collapse
Yes, it's the G928T but it's not blacklisted I checked. The simcards I was using on the phone were old ones(no longer in service) I thought they would work. I used a scissor to cut my WORKING sim and placed it in the phone and it took the MetroPCS sim. Everything works fine now except calls and text only work with WiFi Calling on. If I turn off WiFi, I can't text or make calls(not on registered network) but if I turn the WiFi back on, it works fine. Any suggestions?
MetroPCS and T-Mobile are on the same network.
Check/add MetroPCS APN.
Setting -> Mobile Networks -> Access Point Names
Add MetroPCS APN if it's not there.
gazasalim said:
Yes, it's the G928T but it's not blacklisted I checked. The simcards I was using on the phone were old ones(no longer in service) I thought they would work. I used a scissor to cut my WORKING sim and placed it in the phone and it took the MetroPCS sim. Everything works fine now except calls and text only work with WiFi Calling on. If I turn off WiFi, I can't text or make calls(not on registered network) but if I turn the WiFi back on, it works fine. Any suggestions?
Click to expand...
Click to collapse
knite75 said:
MetroPCS and T-Mobile are on the same network.
Check/add MetroPCS APN.
Setting -> Mobile Networks -> Access Point Names
Add MetroPCS APN if it's not there.
Click to expand...
Click to collapse
Yeah I know they are which baffles me as to why it isn't working. I tried adding a custom APN but same thing happens. I get calls/sms on WiFi but if I turn it off I get "No Service"
Just go to metro and get a new Sim. You could have damaged it by cutting it. It should be free. ATT gives me then free all the time. Usually, the phone will just auto update the apn settings when a specific carriers Sim is inserted
Sent from my SM-G928T using Tapatalk
erick161 said:
Just go to metro and get a new Sim. You could have damaged it by cutting it. It should be free. ATT gives me then free all the time. Usually, the phone will just auto update the apn settings when a specific carriers Sim is inserted
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
I went and it turns out the device is blacklisted. This whole time I was rolling with the imei in the phone, after checking last night, I noticed that the imei on the back of the device differs from the one that's actually on the software. I was able to get in touch with the seller and he's coming back to give me my money back. Guess a mod can mark this thread closed.

Can't dial or send/receive SMS

Hi there. Recently my Nexus 5X has something wrong with its communication function.
I am using CM13 nightly builds with ElementalX kernel on 4GLTE network. And everything works fine except:
When making calls, it ends up with "Network not available". However, the signal bar is full. Also, it is unable to send or receive any text message.
I have already tried:
1. Flash the latest factory image from Google(mtc19v). And it worked for a while then the issue recurred.
2. Dial *#*#4636#*#* and switch to "CDMA only" but it failed to make it, automatically rolled back to LTE mode.
3. Tried CM13 snapshot and other nightly builds, and still got the problem.
Does anyone have any advice? Thanks.
Cijophxon said:
Hi there. Recently my Nexus 5X has something wrong with its communication function.
I am using CM13 nightly builds with ElementalX kernel on 4GLTE network. And everything works fine except:
When making calls, it ends up with "Network not available". However, the signal bar is full. Also, it is unable to send or receive any text message.
I have already tried:
1. Flash the latest factory image from Google(mtc19v). And it worked for a while then the issue recurred.
2. Dial *#*#4636#*#* and switch to "CDMA only" but it failed to make it, automatically rolled back to LTE mode.
3. Tried CM13 snapshot and other nightly builds, and still got the problem.
Does anyone have any advice? Thanks.
Click to expand...
Click to collapse
Try getting a new simcard from your carrier.
Darke5tShad0w said:
Try getting a new simcard from your carrier.
Click to expand...
Click to collapse
Thanks for reply. I will try ASAP.
OK. I have fixed it. This is the MOST weird and tricky problem I have ever met since I knew Android phones.
First there are some key concepts:
From the "*#*#4636#*#*" (Testing) menu -> Phone Information, we notice IMEI, Phone number, and Current Network. In my case I couldn't make phone calls or send/receive text messages, I got my IMEI and Current Network NORMAL, but I got NOTHING for my Phone number section, which means my phone turned into something without a number! So how can it be discovered by the mobile base stations?
Furthermore, scrolling down there are another 3 indicators: GSM service and GPRS service and Network type. In my case the GSM service was "Emergency calls only"(However there is someone on the Androidcentral Forum said his Nexus 4 under the same circumstance can't even dial 911), and I doubt that. The GSM service was COMPLETELY offline. On the other hand, since my data service ran smoothly thus the GPRS service is always "connected". The Network type is "LTE". I have tried many times to change it to the CDMA or GSM ones, like "eHRPD", "1xRTT", "EDGE" or sth else but few succeeded. Once succeeded, I can normally voice or text, yet on the outdated network.
Then how I fixed this:
I googled "Mobile network not available" and got many results about the Samsung phones. Then googled "mobile network not available nexus" and found this one "Mobile Network Not Available" on Nexus 4 T-Mobile which perfectly matches my case. Finally I thought it had something to do with my network provider and my phone should not be blamed. I just tried another SIM card from another carrier, which worked perfectly on LTE network with voice and text. When I opened the *#*#4636#*#* menu and tried to change "preferred network", the phone also worked smoothly no matter WCDMA only/GSM only/LTE only. I put back my bad SIM card and the voice and text came back!??? I was extremely confused. That is to say, still there was a problem on my phone. By inserting another SIM it just did something like refreshing the stucked radio module??? I wondered. After this simple trick I got my voice and text back though, the "Current network" became "Roaming Indicator Off".... Maybe the next time.

Categories

Resources