Develop Bugs

[Kernel][JB/ICS/AOSP][Linaro] Covenant Kernel RC3-Voice Fix {OC/UV} 1.4 ghz {12-1-12}

Covenant Kernel RC3​
This is an all new kernel for AOSP(JB or ICS) roms built from source.
I have decided to take over building an all new kernel for CM10 and other AOSP roms to reduce the work load from the greatergood.
But make no mistake about it, thegreatergood helped tremendously in getting me where i am on overclocking and voltage control.
So smack his thanks button as much as possible.
The covenant kernel is the first of many new releases from my newly formed team, The Covenant. Memebers consisting of- "thegreatergood",
"Bo0st", "terinfire", and myself. We are still recruiting members who can contribute in there own skilled way. So if you think you would like to, and can contribute to the Covenant team hit me or one of the other team members up.
Features
OC/UV up to 1400 mhz
OC Range; 1400, 1200, 1100, 1000, 912, 816, 760, 608, 456, 312, 216
GOVERNORS:
SmartassV2
Interactive
Conservative
Ondemand
Powersave
Userspace
Performance
I/O Schedulers:
Noop
Deadline
Cfq
sio(default)
Click to expand...
Click to collapse
Credits
Thegreatergood
terinfire
roothorick(Camera)
Bo0st
DrMario
dbrannon
Raw0w0
And the XDA and glide community!
Click to expand...
Click to collapse
Pac-man users flash last kernel to fix camera
Click to expand...
Click to collapse
Covenant-kernel-V3 Changelog
Camera Fix
Click to expand...
Click to collapse
Covenant-Kernel-V2 Changelog
Removed deadline and cfq I/O schedulers
Fix Microphone and voice search Cm10
OC 1400, 1300, 1200, 1000, 912, 816, 760, 608, 456, 312, 216
Click to expand...
Click to collapse
Downloads

Mine!
Sent from my SGH-I927 using xda premium

Boots up well..
No Boot animation..
slightly longer boot time..(Or feels like, as its only Samsung from start to end)
wipes up cache during flash..
Usually not seen it while installing any kernel..takes a lot of time to rebuild..
Can you remove it.. ?
will OC and post benchmark results later..

VinayS said:
Boots up well..
No Boot animation..
slightly longer boot time..(Or feels like, as its only Samsung from start to end)
wipes up cache during flash..
Usually not seen it while installing any kernel..takes a lot of time to rebuild..
Can you remove it.. ?
will OC and post benchmark results later..
Click to expand...
Click to collapse
Um yes.. boot animation runs.. this only works on CM10.. I tested it 25 times. Booted up in seconds and boot animation ran every time. This will not work on stock ICS based ROMs.
Sent from my SGH-I927 using xda premium

dman3285 said:
Um yes.. boot animation runs.. this only works on CM10.. I tested it 25 times. Booted up in seconds and boot animation ran every time. This will not work on stock ICS based ROMs.
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
Is compatible with lite rom? or only is for CM10?

lorddavid said:
Is compatible with lite rom? or only is for CM10?
Click to expand...
Click to collapse
As the title says.. AOSP.. only for CM10, CM9, AOCP, AOKP, PAC-man, ect, ect... ONLY AOSP roms
Sent from my SGH-I927 using xda premium

dman3285 said:
As the title says.. AOSP.. only for CM10, CM9, AOCP, AOKP, PAC-man, ect, ect... ONLY AOSP roms
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
aaa ok, thanks

dman3285 said:
Um yes.. boot animation runs.. this only works on CM10.. I tested it 25 times. Booted up in seconds and boot animation ran every time. This will not work on stock ICS based ROMs.
Click to expand...
Click to collapse
oh, Time to change back..i am on stock ICS..
In Stock ICS,
Not able to pass lockscreen from second boot onwards..
phone gets struck and hangs.. also does not charge..

VinayS said:
oh, Time to change back..i am on stock ICS..
In Stock ICS,
Not able to pass lockscreen from second boot onwards..
phone gets struck and hangs.. also does not charge..
Click to expand...
Click to collapse
That's because this is Only for AOSP ROMs.. clearly stated in title and OP..
Sent from my SGH-I927 using xda premium

so this really a teaser for upcoming update to the cm10/10.1 and aosp roms

What do you mean by "wakelock enabled" in the op?
Sent from my SAMSUNG-SGH-I727 using xda premium

If I need to explain it you don't need to flash it.
Means you can enable wake lock in settings if supported..
Sent from my GT-I9103 using xda premium

Just a quick question! overclocked to 1400mhz? is that safe? I was having trouble with litekernel clocked to 1.28!! and heat issues while running google maps. and how does that affect the battery life?

dbrannon79 said:
Just a quick question! overclocked to 1400mhz? is that safe? I was having trouble with litekernel clocked to 1.28!! and heat issues while running google maps. and how does that affect the battery life?
Click to expand...
Click to collapse
Its completely stable.. been running it at 1400 with smartassV2 and has been flawless .. not even gotten warm...
Sent from my GT-I9103 using xda premium

dman3285 said:
Its completely stable.. been running it at 1400 with smartassV2 and has been flawless .. not even gotten warm...
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I wish I could use it in Ice Pop rom too! But it's a modified stock rom!
Sent from my SGH-I927 using Tapatalk 2

This was just a quick run on quadrant OC at 1400, UV at 750
Sent from my SGH-I927 using xda premium

dman3285 said:
If I need to explain it you don't need to flash it.
Means you can enable wake lock in settings if supported..
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Do you mean these wakelocks? If yes, I doubt that there is any Android release having such an option. If you disable wakelocks, almost nothing will work on the system.

dman3285 said:
If I need to explain it you don't need to flash it.
Means you can enable wake lock in settings if supported..
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I am not a noob at this I've been flashing roms for a long time and I've never seen the tweak wake lock enabled and I've only seen wake lock referred to as apps or other things keeping your phone awake and killing battery
I'm not trying to be rude i was just curious
Sent from my SAMSUNG-SGH-I727 using xda premium

dman3285 said:
This was just a quick run on quadrant OC at 1400, UV at 750
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
Looks awesome! Is that 750mv at 1400Mhz? I cannot imagine that would be possible, the lowest voltage at the highest frequency. If it is, then the covenant really does work miracles!
Sent from my SGH-I927 using xda app-developers app

What are you using to oc? I am using antutu but can't seem to find 750 Anywhere
Sent from my SGH-I927 using xda app-developers app

[Q] Dear Developers Can you do this for galaxy gio

Dear Developers Are you making the Rom works as efficiently as the original rom and Ice Cream Sandwich or jally ben
Sorry I can not speak English because I do not mastered much

I didn't understand your question.

RazOne said:
I didn't understand your question.
Click to expand...
Click to collapse
He means that he wants cm10 or 10.1 roms as stable as the official jellybean rom for other supported devices
Sent from my GT-S5660 using xda app-developers app

RazOne said:
I didn't understand your question.
Click to expand...
Click to collapse
Sorry guys this is not a question

nasseri said:
Dear Developers Are you making the Rom works as efficiently as the original rom and Ice Cream Sandwich or jally ben
Sorry I can not speak English because I do not mastered much
Click to expand...
Click to collapse
batman38102 said:
He means that he wants cm10 or 10.1 roms as stable as the official jellybean rom for other supported devices
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Yes, of course, I mean that I want the Rom original and be cm9 or cm10

Try oldroids cm 10.1
There are only a few small issues but I am sure he will fix them. Its very stable and smooth.

Huh official cm9, cm10, cm10.1? We still don't have official cm7 yet

[sarcasm mode ]
you can do it yourself! everything that developers do is press a button!
[/]
oh wait. they dont.
if it whas that easy it would have been done already, not?
Sent from my GT-S5660 using xda app-developers app

voetbalremco said:
[sarcasm mode ]
you can do it yourself! everything that developers do is press a button!
[/]
oh wait. they dont.
if it whas that easy it would have been done already, not?
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
True.... I'm trying to compile PAC ROM but I can't find Device tree for gio. Can anyone help?
Sent from my GT-S5660 using xda app-developers app

batman38102 said:
True.... I'm trying to compile PAC ROM but I can't find Device tree for gio. Can anyone help?
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
they're on github. oldrdroid, erickas, etc, all of the developers compiling from source for gio have it, use the link to their sources
Sent from my GT-S5660 using xda app-developers app

jkoetsier said:
Try oldroids cm 10.1
There are only a few small issues but I am sure he will fix them. Its very stable and smooth.
Click to expand...
Click to collapse
i am wondering if others have issues (big ones), with waking up after sleep.. if i left the phone untouched for like several hours and try to use it... well, for some 10 seconds it is horribly lagging.. cpu gov smartassv2

Glisse said:
i am wondering if others have issues (big ones), with waking up after sleep.. if i left the phone untouched for like several hours and try to use it... well, for some 10 seconds it is horribly lagging.. cpu gov smartassv2
Click to expand...
Click to collapse
Did you change the min freq to 122MHz?

1N4148 said:
Did you change the min freq to 122MHz?
Click to expand...
Click to collapse
nope, 245-800.. when receiving calls if it happens that i hold the phone i just simply cant answer, the phone needs those 4-5 seconds to "wake up"..it`s really annoying..tried to switch to ondemand governor, is the same..

Try using:
Gov: SmartAssV2
i/o Scheduler: sio
Min: 122
Max: 800
Do this in the Developer Settings
Don't use a third party app unless you're on stock GB.

Peteragent5 said:
Try using:
SmartAssV2
Gov: sio
Min: 122
Max: 800
Do this in the Developer Settings
Don't use a third party app unless you're on stock GB.
Click to expand...
Click to collapse
It was already on smartassv2 governor, because i always use this governor, no matter what rom.. for instance, the exact problem i described here i had on some cm9 roms and even cm7.2, which had been instantly fixed by switching from ondemand to smartass.. well, this time it seemed to not work, but taking your suggestion i dug about that "sio" thing and found that it some i/o scheduler, which was set to "noop" by default.. by changing it to sio it does seem to help, not quite absolute sure yet, but i would say that it is much faster to wake up now.. thanks!
hopefully there will be a final, stable, bugfree version of jellybean in the end.. developer-united, all working on one good rom instead of 10 incomplete ones, including here even this rom of oldroid. which is very good, but apart from the occasional lags.. i also had to give up the custom dialing (touchpal contacts), custom sms handling (go sms), Big!Full screen caller ID.. all of these making the phone unresponsive or complete dead for 30 secs-1 min, black screen and only touch buttons white.. so it`s still lots to be done until any of these many roms outthere would be as stable as the cm7.2 jellybread i used for the past 5-6 months which have had not a single crash, or moment of lagging.. but oh well, we are never satisfied with what we have, are we?

Glisse said:
It was already on smartassv2 governor, because i always use this governor, no matter what rom.. for instance, the exact problem i described here i had on some cm9 roms and even cm7.2, which had been instantly fixed by switching from ondemand to smartass.. well, this time it seemed to not work, but taking your suggestion i dug about that "sio" thing and found that it some i/o scheduler, which was set to "noop" by default.. by changing it to sio it does seem to help, not quite absolute sure yet, but i would say that it is much faster to wake up now.. thanks!
hopefully there will be a final, stable, bugfree version of jellybean in the end.. developer-united, all working on one good rom instead of 10 incomplete ones, including here even this rom of oldroid. which is very good, but apart from the occasional lags.. i also had to give up the custom dialing (touchpal contacts), custom sms handling (go sms), Big!Full screen caller ID.. all of these making the phone unresponsive or complete dead for 30 secs-1 min, black screen and only touch buttons white.. so it`s still lots to be done until any of these many roms outthere would be as stable as the cm7.2 jellybread i used for the past 5-6 months which have had not a single crash, or moment of lagging.. but oh well, we are never satisfied with what we have, are we?
Click to expand...
Click to collapse
Right, by sio I meant the i/o scheduler.. Updated my previous post.
SmartassV2 saves more battery when screen is turned off. It's also a nice balance of performance & battery.
Sio is just reliable. It gets the job done.
For more info, read here
Yes, we all want the perfect stable ROM as well as the latest updates from Android, and that's what OldDroid is trying to bring us.
Even now, I'm still on Stock GB.. Hopefully I'll move onto OldDroid's new CM9 build

Overclock JB

Hey xda & members
I was wondering if anyone know how to overcloxk jelly bean Tom's. I searched all over and can't find a kernel or no one has done it. My jelly bean is really slow please help Me
Sent from my SGH-I897 using xda app-developers app

jelly bean Tom's???

Kéno40 said:
jelly bean Tom's???
Click to expand...
Click to collapse
My mistake. I meant "roms"
Sent from my SGH-I897 using xda app-developers app

even i too have a doubt, will over lcoking the device and using it as daily use in that frq. will this affect my device ? or any negative side of overclocking?

ramprabhu19 said:
even i too have a doubt, will over lcoking the device and using it as daily use in that frq. will this affect my device ? or any negative side of overclocking?
Click to expand...
Click to collapse
OC is not always safe, but putting 1200 max on this one is not dangerous...
To change governor / frequency and ram rules... I use the "Rom Toolbox".

I use Flinnys JB rom, it has CPU settings in Performance options (I think any CM based rom should have those) that allow you control min, max fequencies and governor. And given that Flinny includes kernel that supports overclocking you pretty much don't need any extra software to overclock. I set my device to 245-1500 with interactive governor. In conjuction with background process limit set to 2 device performs very well.

[Kernel][3.0.101][OC/UV] Blasphemy Kernel v6.6

Hi guys, I've been working on a kernel for fun, so I thought I'd share it. The cm10.1 version is based off cm-10.1 branch of team hydra's source. I'm working on a cm10.2 version based off cyanogenmod's cm-10.2 branch. I can't tell you what rom it'll work with, since I mainly use cm10.1, but I'm fairly sure it'll work without problems on other AOSP roms.
Features:
OC/UV to 1600mhz
650ma charging over usb (Yes, it acutally charges when plugged into a computer while in use now..)
UKSM
Always tracking the latest version of Linux 3.0.y
Optimized SHA routines
Dynamic fsync enabled
mmc tweaks
use gnu version of lib/string and memcopy for better performance
Proportional Rate Reduction for TCP
lzo compressed with updated implementation
zram enabled with snappy compression by google
many other low level tweaks cherry-picked from popular kernels for other devices
Source: https://github.com/blasphemy/android_kernel_samsung_smdk4412
Downloads (4.2):
blasphemy kernel v1: http://f.the-beach.co/stuff/kernal/blasphemykernel-1.zip
blasphemy kernel v2: http://f.the-beach.co/stuff/kernal/blasphemykernel-2.zip
blasphemy kernel v3: http://f.the-beach.co/stuff/kernal/blasphemykernel-3-4.2.zip warning: potentially unstable. YMMV.
blasphemy kernel v4: http://f.the-beach.co/stuff/kernal/blasphemykernel-4-FINAL-4.2.zip
blasphemy kernel v5 http://f.the-beach.co/stuff/kernal/blasphemykernel-5-final.zip
blasphemy kernel v6: http://f.the-beach.co/stuff/kernal/blasphemykernel-6-final-4.2.zip
blasphemy kernel v6.1: http://f.the-beach.co/stuff/kernal/blasphemykernel-6.1-4.2.zip
blasphemy kernel v6.2: http://f.the-beach.co/stuff/kernal/blasphemykernel-6.2-4.2.zip
Downloads (4.3)
blasphemy kernel v2: http://f.the-beach.co/stuff/kernal/blasphemykernel-2-4.3.zip
blasphemy kernel v4: http://f.the-beach.co/stuff/kernal/blasphemykernel-4-FINAL-4.3.zip
blasphemy kernel v6.1 http://f.the-beach.co/stuff/kernal/blasphemykernel-6.1-4.3.zip
blasphemy kernel v6.2: http://f.the-beach.co/stuff/kernal/blasphemykernel-6.2-4.3.zip
blasphemy kernel v.6.6: http://f.the-beach.co/stuff/kernal/blasphemykernel-6.6-4.3.zip
md5sums (By order of release):
162a62fa52a3aaf3d3e5018b4ac2af6a blasphemykernel-1.zip
c560665c5408ad305ccaaf4ffe621f07 blasphemykernel-2.zip
36f568d46214d6d8e44620b761f0e038 blasphemykernel-2-4.3.zip
a758fbf78d6c6cdf267318f8a008208b blasphemykernel-3-4.2.zip
dc21fd3c8545c3e36ef5925f22ea5f3b blasphemykernel-4-FINAL-4.2.zip
2ae5873464db5d2b42c44c2205798a1f blasphemykernel-4-FINAL-4.3.zip
ab40287ebaea03306e9d27b7f1759ea5 blasphemykernel-5-final.zip
aa141b636f9363db980f4acef47402a0 blasphemykernel-6-final-4.2.zip
e99e83f8ffe0919127a058a1032fc8d7 blasphemykernel-6.1-4.3.zip
f0989b2185377487747f9be4392486d3 blasphemykernel-6.1-4.2.zip
ab3aea0b1997092762ccc1f7a996c0f1 blasphemykernel-6.2-4.2.zip
b8e6f32037c23aebe907abf4d72efae0 blasphemykernel-6.2-4.3.zip
b952c712d8d7ef750947632b9fe48b55 blasphemykernel-6.6-4.3.zip
Roadmap:
Add JIT packet filter
Add BFS
Add a slew of governers/io schedulers

Zxo0oxz said:
Hi guys, I've been working on a kernel for fun, so I thought I'd share it. The cm10.1 version is based off cm-10.1 branch of team hydra's source. I'm working on a cm10.2 version based off cyanogenmod's cm-10.2 branch. I can't tell you what rom it'll work with, since I mainly use cm10.1, but I'm fairly sure it'll work without problems on other AOSP roms.
Features:
OC/UV to 1600mhz
650ma charging over usb (Yes, it acutally charges when plugged into a computer while in use now..)
UKSM
Always tracking the latest version of Linux 3.0.y
Optimized SHA routines
Dynamic sync control enabled
mmc tweaks
use gnu version of lib/string and memcopy for better performance
many other low level tweaks cherry-picked from popular kernels for other devices
Source: https://github.com/blasphemy/android_kernel_samsung_smdk4412
Downloads:
blasphemy kernel v1: http://f.the-beach.co/stuff/kernal/blasphemykernel-1.zip
Click to expand...
Click to collapse
so how should we install this....

comptonhubbard said:
so how should we install this....
Click to expand...
Click to collapse
Same way you flash a ROM..
Sent from my SPH-D710 using Tapatalk 4

comptonhubbard said:
so how should we install this....
Click to expand...
Click to collapse
Just flash the zip. No further work needed, it clears the cache and everything for you.

Zxo0oxz said:
Just flash the zip. No further work needed, it clears the cache and everything for you.
Click to expand...
Click to collapse
I did that and I oc to 1400 and set I/0 to sio and governor to peq - --is there a default setting for this.

comptonhubbard said:
I did that and I oc to 1400 and set I/0 to sio and governor to peq - --is there a default setting for this.
Click to expand...
Click to collapse
Use whatever tweak app you like, I know Cyanogenmod has an option to set those options on boot.

NICE LIKE TO SEE WE ARE GETTING MORE KERNELS!! THANKS
Sent from my LG-LS970 using Tapatalk 4

Well done!
Sent from my SPH-D710

So I take it this will not boot on our cm10.2 or any 4.3 ROM right now correct?
Sent from my SCH-R760 using XDA Premium 4 mobile app

ps3hacker3 said:
So I take it this will not boot on our cm10.2 or any 4.3 ROM right now correct?
Sent from my SCH-R760 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm not really sure. If it doesn't work, I can roll out a version rebased from 10.2 source within a few hours

Seems to be running nicely so far. Oc to 1400 with -50 under volt across the board. Has anyone had any success with lower uv than that? I'm too tired for
Trial and error.
Sent from my SPH-D710 using XDA Premium 4 mobile app

Would you mind updating the OP with an md5?
Sent from my SPH-D710

MustWarnothers said:
Seems to be running nicely so far. Oc to 1400 with -50 under volt across the board. Has anyone had any success with lower uv than that? I'm too tired for
Trial and error.
Sent from my SPH-D710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The OC/UV is the same used on agat63's kernel and LZ, so you can expect similar results.

Sweet! trying this out now. ^.^

abadasstanker69 said:
Would you mind updating the OP with an md5?
Sent from my SPH-D710
Click to expand...
Click to collapse
Done.

Ok...just tested this for a few minutes. Instantly rebooted after flashing....which I really wan't expecting. Thought maybe I had bricked my phone for a sec since I don't have USB access to my phone BUT nope! Booted right up. Played with the gov's...all worked well. 1600 worked just fine. Had to rebuild my scripts for link2sd for ext4 which I expected. Then the bad news......GPS is totally whacked out. Didn't work at all. I used both of my gps apps and not a single sat was found. Other than that it was great! Had to switch back to stock CM till the GPS is fixed because I'm new to Az and don't know my way around yet. Thanks for the work though!

I'll be checking this out, I'm working on building pure vanilla jellybean 4.2.2 so I'll give this a try once the source finishes syncing and I compile it.
Sent from my SPH-D710 using XDA Premium 4 mobile app

abadasstanker69 said:
Ok...just tested this for a few minutes. Instantly rebooted after flashing....which I really wan't expecting. Thought maybe I had bricked my phone for a sec since I don't have USB access to my phone BUT nope! Booted right up. Played with the gov's...all worked well. 1600 worked just fine. Had to rebuild my scripts for link2sd for ext4 which I expected. Then the bad news......GPS is totally whacked out. Didn't work at all. I used both of my gps apps and not a single sat was found. Other than that it was great! Had to switch back to stock CM till the GPS is fixed because I'm new to Az and don't know my way around yet. Thanks for the work though!
Click to expand...
Click to collapse
I'll look into the GPS issue when I get off work, because I never use it. As far as the reboot, sorry about that, I'll remove it from the next build.
Next order of business: messing with governors isn't really my thing, but are there any that you guys would really like to have in a kernel? IO schedulers as well?

Zxo0oxz said:
I'll look into the GPS issue when I get off work, because I never use it. As far as the reboot, sorry about that, I'll remove it from the next build.
Next order of business: messing with governors isn't really my thing, but are there any that you guys would really like to have in a kernel? IO schedulers as well?
Click to expand...
Click to collapse
PQ has always been my favorite. I think everything else is awesome. Just went back to Dastin's stock cm kernel and GPS came back. Also, the reboot isn't such a huge deal. I just wasn't expecting it is all. Overall it looks great man
Sent from my SPH-D710 using xda app-developers app

Zxo0oxz said:
I'll look into the GPS issue when I get off work, because I never use it. As far as the reboot, sorry about that, I'll remove it from the next build.
Next order of business: messing with governors isn't really my thing, but are there any that you guys would really like to have in a kernel? IO schedulers as well?
Click to expand...
Click to collapse
I have no issues with GPS, got a lock fairly quickly!

CPU/GPU OC info [UPDATE 02/22/2014] [Video Guide]

DISCLAIMER: I take absolutely no responsibility for any possible damage to your device.
The settings and values I post could potentially break your device due to massive overheating and I will detail which ones.
VIDEO GUIDE IN POST #3
To unlock CPU/GPU Overclocking:
In /system/bin, rename mpdecision to mpdecision.back and remove permissions.
In /system/bin, rename thermald to thermald.back and remove permissions.
Replace your thermald.conf in /system/etc with the one I posted in the downloads and set permissions.
--unsure if this step is needed--
In TricksterMod, after a reboot, you should no longer see MPDecision. Turn on intelliplug. There is also an MP-Decision Control. Go into it and set both options that are on to off.
WIP

Stable voltages for 162MHz-1944MHz PVS 1+
81MHz - 600mV
162MHz - 625mV
216MHz - 650mV
270MHz - 675mV
324MHz - 700mV
378MHz - 725mV
384MHz - 750mV
486MHz - 775mV
594MHz - 800mV
702MHz - 825mV
810MHz - 850mV
918MHz - 875mV
1026MHz - 900mV
1134MHz - 925mV
1242MHz - 950mV
1350MHz - 975mV
1458MHz - 1000mV
1566MHz - 1037.5mV
1674MHz - 1062.5mV
1728MHz - 1087.5mV
1782MHz - 1112.5mV
1836MHz - 1137.5mV
1890MHz - 1162.5mV
1944MHz - 1162.5mV
1998MHz - 1175mV
2052MHz - 1175mV
2106MHz - 1187.5mV
2133MHz - 1200mV
2160MHz - 1225mV
2214MHz - 1250mV
2295MHz - 1275mV

Downloads
Modified thermald.conf - https://app.box.com/s/9m0id573ayuojqteuri8
Here's a guide on how to prevent your max frequency CPU frequency from resetting to 1728MHz and GPU resetting to 320MHz.
https://www.youtube.com/watch?v=ue2K943prVs&feature=youtube_gdata_player
Tasker Scripts - Will upload once I make a guide for them.

Hi i tryed it out when i was on Bam about two days ago, i changed permissions and replaced file but it didnt unlock OC. Is there something i missed, im using an e988

You also need to change the name and permissions of mpdecision in /system/bin.
I would not encourage going higher then 1.89GHz. A few of us had some nasty side effects and had to send in for a new phone.
Sent from my LG-E980 using XDA Premium 4 mobile app

What do I rename the mpdesicion file to? And do I change permissions to rw r r
Sorry I'm a bit noob

riki126 said:
What do I rename the mpdesicion file to? And do I change permissions to rw r r
Sorry I'm a bit noob
Click to expand...
Click to collapse
Remove all permissions and rename it bak.mpdecision.bak
Sent from my Optimus G Pro using xda app-developers app

Is it compatible with Stock Rom as well?

fosunite said:
Is it compatible with Stock Rom as well?
Click to expand...
Click to collapse
One is for 4.3 and one is for 4.4... So no
Sent from my Optimus G Pro using xda app-developers app

Ok so I've done everything you've told me and still OC hasn't unlocked. I'm using bam 4.4.2 ROM on e988. I replaced file and did permissions and made mpdesicion to mpdesicion.back and removed permissions. Is there anything else? Thanks

riki126 said:
Ok so I've done everything you've told me and still OC hasn't unlocked. I'm using bam 4.4.2 ROM on e988. I replaced file and did permissions and made mpdesicion to mpdesicion.back and removed permissions. Is there anything else? Thanks
Click to expand...
Click to collapse
I forgot to mention changing thermald to thermald.back and removing permissions in /system/bin as well. Didn't think this step was needed with the modified thermald.conf but I was wrong.
Sent from my LG-E980 using XDA Premium 4 mobile app

You da man, Neroga! Thanx for the new voltages. Imma try em out
Sent from my e980 using xda app-developers app

Nigglenuts said:
You da man, Neroga! Thanx for the new voltages. Imma try em out
Sent from my e980 using xda app-developers app
Click to expand...
Click to collapse
Not a problem. They're gonna change frequently over this next week until I get them perfectly stable as low as I can push lol.
Sent from my BAM 4.4 LG-E980

Neroga said:
Not a problem. They're gonna change frequently over this next week until I get them perfectly stable as low as I can push lol.
Sent from my BAM 4.4 LG-E980
Click to expand...
Click to collapse
Word up! It just gets better hahaha
Sent from my e980 using xda app-developers app

I factory reset and reinstalled bam and tryed it again but its still not unlocking OC and in trickster mod theres no option for intellidemand :/

riki126 said:
I factory reset and reinstalled bam and tryed it again but its still not unlocking OC and in trickster mod theres no option for intellidemand :/
Click to expand...
Click to collapse
This thread is meant for OC'd kernels which we only have 1 available for 4.3 and 4.4 ROMs, here:
http://forum.xda-developers.com/showthread.php?p=50079215
The steps are meant for "unlocking" the ability to OC so they don't reset back to 1728MHz.
If we get more OC'd kernels that play nicely with mpdecision and thermald, these steps won't even be needed.
--edit--
Anyone think I should start making video guides for things? Really just looking for a way to test the screen recording option with audio through the mic on BAM. I could definitely pack a lot more information into 3-5minute videos than I'd care to type out.. xD
Sent from my BAM 4.4 LG-E980

Neroga said:
This thread is meant for OC'd kernels which we only have 1 available for 4.3 and 4.4 ROMs, here:
http://forum.xda-developers.com/showthread.php?p=50079215
The steps are meant for "unlocking" the ability to OC so they don't reset back to 1728MHz.
If we get more OC'd kernels that play nicely with mpdecision and thermald, these steps won't even be needed.
--edit--
Anyone think I should start making video guides for things? Really just looking for a way to test the screen recording option with audio through the mic on BAM. I could definitely pack a lot more information into 3-5minute videos than I'd care to type out.. xD
Sent from my BAM 4.4 LG-E980
Click to expand...
Click to collapse
Yeah. Sure sounds like a great idea
Sent from my LG-E980 using Tapatalk

Just thought I'd share this.
Running the 1/26 BAM build
CPU 162MHz - 1944MHz
GPU 531MHz
Sent from my BAM 4.4 LG-E980

Neroga said:
Just thought I'd share this.
Running the 1/26 BAM build
CPU 162MHz - 1944MHz
GPU 531MHz
Sent from my BAM 4.4 LG-E980
Click to expand...
Click to collapse
I've never tried pushing the GPU that far... But when I set it to 450, I get equivalent scores
Sent from my Optimus G Pro using xda app-developers app

Nigglenuts said:
I've never tried pushing the GPU that far... But when I set it to 450, I get equivalent scores
Sent from my Optimus G Pro using xda app-developers app
Click to expand...
Click to collapse
That's with using some more battery friendly settings. What do you get under GPU 3D graphics? I got 7680. If it's about the same I'll probably drop mine down lol.
Sent from my BAM 4.4 LG-E980