Dear members,
After connecting the HOX with the USB cable, the phone is not recognized
as a SD card/Disk Drive, but as a camera only.
Is it a permanent function of JB, if NO, pls help to rectify it.
Note:- USB debugging is ON
My phone is stock
Sync manager uptp date, but still not recognizing.
JB uses the mtp file transfer protocol, please search for this. It has been mentioned a lot here ! And there are enough posts already regarding this "problem" !
here is the thread you need:
http://forum.xda-developers.com/showthread.php?t=1982219&highlight=mtp+file+transfer
Read and plz don't start another regarding this, thanks
Related
Hi, my univversal is dead in bootloader at serial mode and when I connect it to my PC with usb cable it recognize it as an Unknown devices and my phone still stand in serial mode!
I was trried all the method I found like:
I went to device manager of my PC an re-install my usb--didnt work
shut down usb and active synch (with task manager) and ry mtty program-- dident work
I change my usb cable and change te mini usb gate of my phone!-- didnt work
Plz help me!!!!!!!!
god_love_power said:
Hi, my univversal is dead in bootloader at serial mode and when I connect it to my PC with usb cable it recognize it as an Unknown devices and my phone still stand in serial mode!
I was trried all the method I found like:
I went to device manager of my PC an re-install my usb--didnt work
shut down usb and active synch (with task manager) and ry mtty program-- dident work
I change my usb cable and change te mini usb gate of my phone!-- didnt work
Plz help me!!!!!!!!
Click to expand...
Click to collapse
Hi welcome to the forum.... try following
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
(try method 2)
and try to change the computer usb ports...try different usb ports of the computer and try flashing to tomals 8.5 or 8.7 ...
Cheers
Rajiv
Thank you rajivshahi for your answer and attention.
I had try all the methods that I find in hole of internet!!
also I tried your suggstted method. I was connect my phone with ans without SIM and memory to each USB port of my (and another) PCs, I changed my USB cable for several times, I also tried Uni_bootloader program and MTTY but they didn't work (because there is no USB connetion with my UNI and my PC)
I just keep crying!!!!!!
Have you tested doing Doc format?
Hope it helps,
If the device is not recognised by PC at the same time as Serial not changing to USB, I would think your USB port is no longer attached as it should and can cause the problem you described. From time to time USB port might still feel and look secure on mainboard, it will even charge the device, however, when it comes to AS and USB connection to PC, it will not connect properly.
That, or your PC USB or motherboard are malfunctioning. Try other USB devices in the same ports.
My PC's USB ports are work properly because as you told enigma1nz, I had test them with another devices
For the DOC format method: there is no USB port for connecting with MTTY!
Soooooo amazing!
(thanks for all your answers)
So, it means there is no way for me
hey,
have you disabled (unckeck) USB connection for ActiveSync/WMDC at PC?
do it now or USB port will not be available for mtty.
also please make sure that you installed XP sync driver under vista incase you're trying from vista.
follow the same -
1. unckeck USB connection for as/wmdc at pc
2. reset the device by pressing reset button
3. set bl mode (if not there already)
4. connect usb cable
5. start mtty ...
Hi Tomal, first I have to say: Thank you for your amazing roms. they are so fast, nice and stable. I'm one of the biiiig fan of your roms.
seconed: yes I was disabled the USB connection and also kill ir from task manager. but my Uni is still deeaaaaaaad
somehow I have a feeling that something is wrong with the usb port in device. may be connection is broken or something...
Hi everyone,
finally I had to send my Universal to doctor! , he says that I can load your device from SD card, and boot up it, (flashing card)
!!
I was wondered! what is flashing card! (load from SD card without any PC!)
Do any one have some information about this method!!!!
enigma1nz said:
If the device is not recognised by PC at the same time as Serial not changing to USB, I would think your USB port is no longer attached as it should and can cause the problem you described.
Click to expand...
Click to collapse
tomal said:
somehow I have a feeling that something is wrong with the usb port in device. may be connection is broken or something...
Click to expand...
Click to collapse
Yep, it does look like your device's USB being a culprit.
god_love_power said:
Hi everyone,
finally I had to send my Universal to doctor! , he says that I can load your device from SD card, and boot up it, (flashing card)
!!
I was wondered! what is flashing card! (load from SD card without any PC!)
Do any one have some information about this method!!!!
Click to expand...
Click to collapse
I believe this is the thread you are looking for
http://forum.xda-developers.com/showthread.php?t=393370
Thanks a lot enigma1nz, i think that i need but can you (or any one) explane it, step by setp for me PLEASEE !:
1. Download the tool and unrar somewhere in your pc.
2. Decode the rom image (nk.nbf) using HTC64 tool and put it (nk.nba) under the "SD_Flash" directory.
3. Run the "SDFlash_G3.cmd" and follow instruction on the screen.
SD_Flash?????
Decode the rom image (nk.nbf)???????!!
this method is for 3G, my device is 4G
This is the solution
god_love_power said:
this method is for 3G, my device is 4G
Click to expand...
Click to collapse
my dear frnd few days back i was also suffered from that problem...
And problem was with mini usb in universal.
it was disconnected with there tracks from inside.
So just open ur g4 device and resold mini usb.
trust me this is the problem.
Thanks yuvraj, how can I do it? Is there any manual for it?
can you help
You can find the manual in the Wiki, just do a search
I could'nt creat golden disk (flash from sd) cos that is for G3 devices, I just think that can we install another OS like linux on SD that is boot himself up?!
or i just have to change my universal mainboard!!!!?
Finally I beleve that my Uni is dead and I have to say goodbye to it
I'm going to buy HTC Advantage X7510, but there is one question:
Can I upgrade its WM 6.1 to 6.5 ?
Hi
Need your help please. I have read though the topics similar to this posted earlier but it does not solve the issue.
My phone is not detected either in mtp mode or mass storage mode by the computer.
I think i deleted a stock application Connected To(i think thats the name) and thats when the problem started. I need help in reinstalling this app if possible.
Additional info:
- The app mtpappgb is already installed in my system/app folder.
- I get no options in the notification bar regarding debugging or connecting the SDcard.
- Have already installed the correct USB drivers on the pc and also the latest version of PC companion on the phone which leads me to believe that its a missing app from the phone.
Appreciate any help you can provide.
Thanks
Shayne
Hi Mods,
Please close thread. Sorted out by flashing generic uk firmware. Good as new Thanks.
Hi all...I am new to XDA forum, but have been browsing in the trove of information to help with my problem. At the end I am resorting to posting a new thread to hopefully help me in resolving this problem or provide a good explanation why it does not work.
Problem: I am trying to use the USB cable to transfer files to my SD Card. (I am not sure what reason, but someone has informed me that either Samsung's proprietary software Kies does NOT work, you can only transfer using Samsung KIES Air...which is painfully slow.)
Now here is my situation:
1. I have a Bell Canada - Samsung Galaxy Note-2
2. The Phone has been unlocked and rooted (using Odin)
GOAL:
- I don't care if I need to transfer files to the SD card, and then sort the files out afterwards on the phone.
- Primary goal is to allow me to transfer files (music, mp3, etc.) via USB cable.
Your help is greatly appreciated...in providing some sort of clear cut instructions or directions.
Thank you in advance.
Android Noob User - Daniel :crying:
I know you didn't ask for this, but could you possibly use Airdroid? It has always been reliable for me and honestly it's my best solution for myself because we don't actually have UMS anymore, sigh.
Airdroid Vs. Kies Air
Thanks for the response and recommendation.
So is Airdroid? better or the same as Kies Air?
dckp said:
Thanks for the response and recommendation.
So is Airdroid? better or the same as Kies Air?
Click to expand...
Click to collapse
I've never used Kies so I can't say!
But basically, you download the app from google play and go to web.airdroid.com and you type in the code that you see in the app. From there you can read your phone's text messages and transfer files and do other things via your wifi connection. File transfer on my (good) wifi network is fairly fast (about the same as using a usb cord) and it's good for me because I personally use Ubuntu and Chrome OS, so the USB storage options don't work or don't work well.
usb driver
All you need is go to samsung website and install the usb driver. You should have an option to do this during the kies installation too.
dckp said:
Hi all...I am new to XDA forum, but have been browsing in the trove of information to help with my problem. At the end I am resorting to posting a new thread to hopefully help me in resolving this problem or provide a good explanation why it does not work.
Problem: I am trying to use the USB cable to transfer files to my SD Card. (I am not sure what reason, but someone has informed me that either Samsung's proprietary software Kies does NOT work, you can only transfer using Samsung KIES Air...which is painfully slow.)
Now here is my situation:
1. I have a Bell Canada - Samsung Galaxy Note-2
2. The Phone has been unlocked and rooted (using Odin)
GOAL:
- I don't care if I need to transfer files to the SD card, and then sort the files out afterwards on the phone.
- Primary goal is to allow me to transfer files (music, mp3, etc.) via USB cable.
Your help is greatly appreciated...in providing some sort of clear cut instructions or directions.
Thank you in advance.
Android Noob User - Daniel :crying:
Click to expand...
Click to collapse
Just in case, make sure that MTP is checked in USB computer connection.
*Settings>Storage> Menu button>USB computer connection> check Media device (MTP)*
I know it may seem obvious to some but it does get overlooked sometimes.
Cheers!
ace862 said:
Just in case, make sure that MTP is checked in USB computer connection.
*Settings>Storage> Menu button>USB computer connection> check Media device (MTP)*
I know it may seem obvious to some but it does get overlooked sometimes.
Cheers!
Click to expand...
Click to collapse
In regards to the downloading the 'Samsung Driver' I have already attempted that, and with no luck of cooperating. Under 'device Manager' in Window 7. The listed device when I plug-in the phone is "Qualcomm CDMA Technologies MSM" with an exclamation mark. I have been trying to try the driver files so I can 'direct' the appropriate drivers file. But no luck locating it. The Samsung Kies installation mention that it has installed, but no luck.
MTP Option:
In regards to the MTP, I do not have that option available on my phone, the only thing avaliable is through the 'Developer option -> Checking/Unchecking USB debugging'
Please Help! :crying:
I have download the driver form the Samsung.com website.
Now, It doesn't technically allow to choose my specific phone model, with my carrier (BELL), so I went with the closest ATT.
I have located the folder with the USB driver, and force window to look through it.
But still windows says it cannot find the correct driver for my device....this is getting frustrating.
HELP...help...help...
dckp said:
MTP Option:
In regards to the MTP, I do not have that option available on my phone, the only thing avaliable is through the 'Developer option -> Checking/Unchecking USB debugging'
Please Help! :crying:
Click to expand...
Click to collapse
That is odd. Do you have a Storage category under System Settings? It should show you available space on internal and sd storage. What happens when you hit the menu button? (button to the left of the home button)
When you connect your USB cable, do you get a notification that says "Connected as a media device"?
Heres what you do.
Make sure you have current samsung usb drivers. Redownload just for fks sake.
Yeah idk wtf ms prob is but its got issues with samsung phones.
So ok drivers gtg?
Plug in phone
Wait for annoying pop up.
Leave phone pluged in and on restart computer.
You should get the all clear but first it may give you the cant recognize drivers thing give it a min should work.
Other solution
Download this
http://www.google.com/url?q=http://...gQFjAA&usg=AFQjCNEJj15zF95WRtG86GXUDNcyErSAGA
Basically just keep going back and forth witj mtp and mount you should kick it in.
And you may need to restart computer.
Sgs3 easy wotks pretty good for me.
You gotta make sure you have the microsoft mtp update installed.
Pia I know.
ace862 said:
That is odd. Do you have a Storage category under System Settings? It should show you available space on internal and sd storage. What happens when you hit the menu button? (button to the left of the home button)
When you connect your USB cable, do you get a notification that says "Connected as a media device"?
Click to expand...
Click to collapse
In regards to your question. Yes It is odd....'Yes" I do have a storage category under System settings. I do see available space on internal and sd storage. BUT Nothing happens when I hit the menu button. Absolutely nothing
dckp said:
In regards to your question. Yes It is odd....'Yes" I do have a storage category under System settings. I do see available space on internal and sd storage. BUT Nothing happens when I hit the menu button. Absolutely nothing
Click to expand...
Click to collapse
I'm sorry. That is my bad. It looks like those options are not available on the stock rom. I thought they were. The option is there on CM.
It looks like it is probably a driver issue. If your computer is not recognizing your device when it is plugged in, it could also be a bad USB cable. If you can try a different cable, see if something different happens when you plug in your phone.
Worst comes to worst, you may just have get a card reader and connect your sd card to your computer that way.
1. Is cable good? It may be sending incomplete signal. The fault could be your device's usb port or cable or pc usb port.
1a. test device with another known working usb cable
1b. test cable with another known working device
2. Is PC port good?
2a. Plug a different, known working USB device into port, do other devices work?
2b. Plug device into another usb port on PC, not into usb hub or front usb ports.
2c. Does it successfully connect for transfer with another PC?
3. Is driver good?
(This is most likely your problem, but a bad usb device, cable, or port can make it more difficult to troubleshoot. )
3a. Re-download driver. BUT BEFORE YOU DO...
use a different browser to download or delete your browser's cache. (Attempting to redownload may just be grabbing the already known poor copy.)
3b. Run Windows Update after driver is installed.
If still having problems.
Search for, download, and run the portable program usbdeview. Attached USB devices will be highlighted. See if it shows up to the system and what it is being recognized as.
It sounds like either a bad driver install or conflicting program/setting.
Turn off antivirus temporarily to rule that out.
For assistance with installing Qualcomm USB drivers, see this post:
http://forum.xda-developers.com/showthread.php?t=1669498
Hello everybody,
I've a problem with my NOTE 2.
When I try to connect my NOTE 2 to my PC at work, the PC is not able to recognize it.
I think it's due to the MTP protocole.
I know that with my SGS1, it works.
Do you think that there is a possibilitie to install an app in order to transform the phone in USB Storage as an standard USB Stick? Or a program made by a developper.
It will be very helpfull for me if you find a solution.
If you want more informations, ask me.
Thanks
zewolf said:
Hello everybody,
I've a problem with my NOTE 2.
When I try to connect my NOTE 2 to my PC at work, the PC is not able to recognize it.
I think it's due to the MTP protocole.
I know that with my SGS1, it works.
Click to expand...
Click to collapse
You need to start your "windows Installer" service before connecting your device
How to:
Make sure Windows is set to auto-update
connect your device with USB
From Device manager(right-click on "My Computer" and choose "Manage") Uninstall the Drivers
disconnect your USB device
Go to PC->Control Panel->Adminstrative Tools->Services
Start your "windows Installer" service
Connect your device with USB
keep the device connected until windows show Device Install Succefully(it can take a while, up to 10 minutes)
It should work well after that.
zewolf said:
Hello everybody,
I've a problem with my NOTE 2.
When I try to connect my NOTE 2 to my PC at work, the PC is not able to recognize it.
I think it's due to the MTP protocole.
I know that with my SGS1, it works.
Do you think that there is a possibilitie to install an app in order to transform the phone in USB Storage as an standard USB Stick? Or a program made by a developper.
It will be very helpfull for me if you find a solution.
If you want more informations, ask me.
Thanks
Click to expand...
Click to collapse
Hey zewolf,
Most of the companies have there security policy where the USB storage is disabled same goes with me the Firm where i was working it was Disabled it use to charge but never open the Drives i had to raise a request to Local It team who manages the IT for us for the tech to visit and using Admin rights he enabled it and now works find suggest you to check with your local IT team,
I know looking at the form this question has been asked but I have tried all of it.*
I have a HTC one X (PJ83120 - Telstra) and I have tried everything to get usb mass storage working on Windows 7. I have reset to factory settings, updates Android to 4.2.2(Highest I can go atm), installed new drivers and sync software, used different pc's and cables and tried with usb debugging on and off.*
The phone informs me it's connected via usb and will also change but windows always reports "USB device not recognize device" even with new drives.*
Any tips and help would be good thanks in advance.*
wrong forum my friend, do not follow any of the guides in this forum or you could cause serious damage to your device. the forum you need is here>>>>>http://forum.xda-developers.com/one-x-att