[Q] Flash Dinc to Metropcs - Droid Incredible Q&A, Help & Troubleshooting

Posted on General when i should have posted here.
Any way i can do this by myself?
PLEASE?

MoonMaster345 said:
Posted on General when i should have posted here.
Any way i can do this by myself?
PLEASE?
Click to expand...
Click to collapse
Yes you can. You just need to flash a metro prl to your phone, and then contact them. They should be able to do the rest ota. You can get a metro prl here http://www.corolada.com/prl/. If on a stock rom you can flash it with epst, if not you need to use a pc program called QPST.

Man you are the greatest..Seriously!
Im gonna try it right now

Although i need help because QPST cant detect the phone. Im pretty sure that means that the phone needs to be in diagnostic mode
But im trying to get in it but i can't. Does it have to do with being in Tiny's CM10 and not stock?

Well update, i went to gingerbread and changed the prl but i dont think my number got transfered although the metropcs system works
Any help with this?

MoonMaster345 said:
Well update, i went to gingerbread and changed the prl but i dont think my number got transfered although the metropcs system works
Any help with this?
Click to expand...
Click to collapse
Simply changing the prl will not program your phone. The prl meerly allows metro to comunicate with the phone. Im not sure exactly how metros system works. Do you already have an account and number from metro, and is the phones meid registered on metro? If it is you can probably dial *228 and select the option to program if metro uses this option. If you dont have an accout or your phone isnt registered with metro, you will need to call them and do so. You just give them the phones meid they register it, and then program the phone ota (over the air).

Related

[Q] Does being rooted prevent or have anything to do with the metro flash?

Does being rooted prevent or have anything to do with the metro flash?
I ask because Hboot shows S-Off
I cannot unroot.... cannot set user permissions in clockwork. please help...
mexigga said:
Does being rooted prevent or have anything to do with the metro flash?
I ask because Hboot shows S-Off
I cannot unroot.... cannot set user permissions in clockwork. please help...
Click to expand...
Click to collapse
I am pretty sure being rooted will not prevent you from flashing to Metro. If anything, being rooted is necessary. S-off will not have an adverse effect on the flashing to Metro process, either.
Everything you need to know is here:
http://forum.xda-developers.com/showthread.php?t=704161
I got it to root prior to reading this. I will take to M PCS and see if flash is successful (this time around)
thanks.
mexigga said:
I got it to root prior to reading this. I will take to M PCS and see if flash is successful (this time around)
thanks.
Click to expand...
Click to collapse
Wait.......you're taking the Evo to Metro PCS? I don't think they are going to be very helpful seeing as this is not something they condone. What you need (and please read the thread to clarify because I have never personally done this myself but will be doing it soon for a friend of mine) is to have an existing account with Metro so that you can add the info from that account to the Evo and therefore activating on Metro. Unless you know someone that works there and knows what they are doing with this, I don't think you should bother taking it over to them.
Sorry, I should have clarified: I am existing and need to have phone Metro Flashed to get the service. Merely adding the # isn't working as I am on their system already.
I lost the Metro Flash when I screwed up my 1st attempt at rooting.
Here's the problem. Evo is stock & unrooted. People at Metro (right now) are saying that they can't get their computers to read my evo so they are re-downloading drivers, etc. It failed first attempt (today) to metroflash.
I was successful at another corp. store and may need to try where it succeeded.
mexigga said:
Sorry, I should have clarified: I am existing and need to have phone Metro Flashed to get the service. Merely adding the # isn't working as I am on their system already.
I lost the Metro Flash when I screwed up my 1st attempt at rooting.
Here's the problem. Evo is stock & unrooted. People at Metro (right now) are saying that they can't get their computers to read my evo so they are re-downloading drivers, etc. It failed first attempt (today) to metroflash.
I was successful at another corp. store and may need to try where it succeeded.
Click to expand...
Click to collapse
So Metro is helping you flash a phone from another carrier over to them? Talk about customer service! lol
For what it's worth I've never even had to have an EVO rooted to swap its carrier.
Keep in mind though, if you put any AOSP ROM on your phone you will lose the ability to enter ##DIAG# to enter diagnostic mode, and lose the EPST stuff. (For editing settings on the phone, not through QPST/CDMA WS)
If you are flashed to metro or in my case cricket, and you root then you might lose web/mms. Talk and text can be obtained without rooting but web and mms need rooting to run on the proxy work around.
mexiking713 said:
If you are flashed to metro or in my case cricket, and you root then you might lose web/mms. Talk and text can be obtained without rooting but web and mms need rooting to run on the proxy work around.
Click to expand...
Click to collapse
That's where I screwed it up the first go-around. My Evo is good now.
Necrosan said:
For what it's worth I've never even had to have an EVO rooted to swap its carrier.
Keep in mind though, if you put any AOSP ROM on your phone you will lose the ability to enter ##DIAG# to enter diagnostic mode, and lose the EPST stuff. (For editing settings on the phone, not through QPST/CDMA WS)
Click to expand...
Click to collapse
that's the part (AOSP) I didn't realize when I got into android flashing/rooting...
Could've saved me a lot of heartache had I been patient and did more homework on XDA.

HELP: EVO Flashed to Metro (No NAM Settings?)

Hello everyone.
I have a Sprint EVO 4G and it has S-OFF so I flashed it to 2.2 and used Rom Manager to put the stock 2.3.3 rooted deodexed onto it then went to Metro PCS and had them flash it over which they did for $10 then the guy could not get into the NAM setting to put my new phone number ect into the phone. He said usualy all they have to do is 000000 to get into the settings he called the metro techs and they said to reflash it which he did anyway by the end of this he asked me if I knew how to get into the settings which is what brings me here. He refunded my activation and kept the $10 for the flash. I kinow if anyoine can help me it's you guys. Thanks
Adam
OH YEA & P.S. to save another thread should anyone have the answer to this and I get this working on Metro (calls and texts only) can you either direct me to a thread to get the internet 3g and MMS working or give me the steps. Thanks again
download mls finder in the market
jamesrc2384 said:
download mls finder in the market
Click to expand...
Click to collapse
Did you mean "MSL Reader"?
Did u figure it out yet
hey..just wondering did you figure it out yet??? I'm having the same problem.. Thank you
Maybe this will somehow help... It's for flashing to Boost Mobile but perhaps...
http://forum.xda-developers.com/showthread.php?t=1182260
I had this happen to me the first time I tried to "Metroflash" my Evo. I went to three different stores thinking it was the operator, not knowing that when I flashed and rooted the evo, metro pcs could not set it up on their Houdini system. I went bare bones via hard reset (stock rom) and voila, metro got it on their system.
I followed this guide by Bloodykiller after it was rooted. http://forum.xda-developers.com/showthread.php?t=795182
Again, this is what worked for me. Hope this helps.

[Q] Get 'Unauthorized' when trying to make calls, will not OTA

I am using the Jiminy V Rom on Cricket
I am unable to OTA or make calls on the Cricket network. when I try and make a call I get 'Unauthorized' and when I try to OTA (*228) the system says 'unable' at the very beginning. I have done many EVO's to cricket before, and I have checked and double checked all my PST settings, my MEID/MIN/MDN/PRL particularly.
Even when OTA doesnt work , I can always get voice/text working on virtually any other phone by manually programming the MDN/MIN/Home SID & PRL.
My cricket home SID is 4923 & I am using PRL 32200
I have even loaded a working evo's PST settings into this phone (via QPST, read from one phone, write to another), and get same results even after making sure the MDN/MIN & MEID are correct.
The symptoms are exactly the same as if my MEID is not in the cricket system, yet I have triple checked them (and I had someone else program another phone with my MEID and that phone OTA'd and made calls on Cricket with no problem).
Some other data for consideration Android 2.1, build Baseband 2.15.00……007.25 kernel 2.6., Radio 2.05.00.06.10, HBOOT 0.79.0000 SHIP S-OFF
I have also tried factory builds 2.2 (3.26.651.6) and 2.1, (Baseband 2.05.00.06.10,Build 1.41.651.1) with same result. Note: they did not change the PST.
Is there a factory build which will put everything back to Sprint or should I consider updating the HBoot and /or Radio?, I assume the programming for the OTA is done in the Radio?
I am stumped.
Bump, If anybody can help me with this, its been driving me up the wall for two weeks now.,
Have you tried flashing an RUU and updating everything from there? If it isn't the MEID then it might just be your phone having a glitch. Flash it using RUU and let me know.
how do you reset PST/NAM (SPC,MIN,MDN, Etc) to factory?
I have tried RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_release_171253.exe , hboot goes from 0.92 to 0.79, radio from 2.15 to 1.39.00.04.26, and android from 2.2 to 2.1.
But the pst/nam settings remain unchanged, mdn,min, sip, nai, etc are all cricket. even the SPC is still unlocked at 000000. ANd the S-OFF flag is off, Shouldnt the RUU's re-root the phone?
Is there an alternate way to run the RUU, I have tried putting the phone in HBOOT usb mode, then run the RUU but with three different batteries it tells me they are too low (under 30%).
Should I be in Hboot mode to run RUU? (I have been running it from the PC with the phone booted up.
To answer a couple of my own questions, none of the RUU's reset the EPST whether they where loaded from the PC via the .exe method or from the SD card PB31IMG method.
I found a reference to ##786# and found that yes that does reset the EPST (including the SPC) back to factory.
So I figured maybe the problem would be solved, so I updated PST for cricket (MDN,MIN,SID,PRL) and tried again, still no OTA and still 'Unauthoriized; when I try to make calls.
I am starting to believe I have a hardware problem, but how can most of the phone work and yet it have (apparently) problems transmitting MEID?
Seems like no interest here or everybody stumped. I am willing to pay some one to help me resolve this. contact to my email or post here, I will certainly let the forum know when I resolve this. Thanks
GDEMI said:
Seems like no interest here or everybody stumped. I am willing to pay some one to help me resolve this. contact to my email or post here, I will certainly let the forum know when I resolve this. Thanks
Click to expand...
Click to collapse
No need to pay, I forgot about this thread lol. I think you may be right that this is a hardware problem or glitch and I am actually stumped on how to help you. :|
some help here
hi...
im trying to flash my phone and make it to worj for cricket carrier and i do everything ....i think correct but when i try to make a call it ask me if i whant to make a collect phone or buy some kind of card .
i already try the qpst configuration twice and even try many plr to and no luck
righ now i have a 45713hybryd plr
and i use this
http://forum.xda-developers.com/showthread.php?t=934417
i even take to a cricket store to chek for the s/n numbers and the min and they say that everything looks ok but i can do anything on the phone
any ideas, and help
thank
Very dirrerent problem
paulinaoza said:
hi...
im trying to flash my phone and make it to worj for cricket carrier and i do everything ....i think correct but when i try to make a call it ask me if i whant to make a collect phone or buy some kind of card .
i already try the qpst configuration twice and even try many plr to and no luck
righ now i have a 45713hybryd plr
and i use this
http://forum.xda-developers.com/showthread.php?t=934417
i even take to a cricket store to chek for the s/n numbers and the min and they say that everything looks ok but i can do anything on the phone
any ideas, and help
thank
Click to expand...
Click to collapse
Your problem has different symptoms from mine (the threadstarter), it sounds like your prl is incorrect. If you have a correct prl & sid (these can vary for the market you are in , in Phoenix the SID is 4923 and I use the old nationwide non EVDO PRL of 1040) when you dial 611 you will get Cricket, regardless of your ESN/MEID being registered with Cricket, if this doesnt work do not go further. Find a PRL/SID that works (sometimes changing CDMA connect from Auto to Home only can help) . Also make sure MNC/MNC are set to 310/0. Country code/Carrier I think.
Once you get 611 to connect to Cricket, *228 (OTA) will connect to cricket, if It disconnects you before the music starts playing and says 'Sorry....' it is most likely your MEID is not registered correctly with Cricket. In Phoenix *228 always works on EVo's as long as SID/PRL/MEID are correct,
The message you are getting about a credit card required means you are connnecting to some other carriers network (usually Verizon) which is transferring you to someplace to allow you to make a call even though you are
"not authorized" on the network. Go back and check 611 & *228.*228 will load the correct prl for your area and rate plan, check after it runs to see what was loaded. It will also most likely overwrite EVDO settings including MIP, Sip, NAI, etc.
At this point your phone should work, talk & text.
I had the same problem and I look all over. I wanted to unroot and remove jimmy v rom. I was think that if i update to the new update that it will fix it self and i was right. First I had to remove the jimmy v rom, so i got ruu to update the htboot and that let me update to the new 2.3.3. It fix it self and f***ing A.
avillal87 said:
I had the same problem and I look all over. I wanted to unroot and remove jimmy v rom. I was think that if i update to the new update that it will fix it self and i was right. First I had to remove the jimmy v rom, so i got ruu to update the htboot and that let me update to the new 2.3.3. It fix it self and f***ing A.
Click to expand...
Click to collapse
Can you be more specificwhat you loaded and what versions of hboot where involved? I downgraded to 2.1 (with RUU) and hboot .79 and it did not resolve problem.

ntelos showcase weres the love

Is there anyone out there willing to make a rom for ntelos showcase I know y'all r probably getting tired of all the different galaxy s phones but I'm starting to fell a little left out I'm not talking trash and know its not simple but I've been looking forward to do this for a wile its my first android and can't wait to see what its all about so forgive me if this came off rude just trying to get the ball rolling if u know what I mean
Hey. I have an Ntelos Showcase also. Unfortuately I accidenly flashed a US Cellular ROM onto it and screwed it all up. I have an NTELOS or supposedly NTELOS rom back on it now but cant get data to work. Can u do ##data# on your phone and look to see what your user name is? i think its phone#@ntelospcs.net but im not sure. Any settings you can gather for me would be appreciated! or even if u know how to make a rom image from your phone so I can flash back onto mine.
tecknogod said:
Hey. I have an Ntelos Showcase also. Unfortuately I accidenly flashed a US Cellular ROM onto it and screwed it all up. I have an NTELOS or supposedly NTELOS rom back on it now but cant get data to work. Can u do ##data# on your phone and look to see what your user name is? i think its phone#@ntelospcs.net but im not sure. Any settings you can gather for me would be appreciated! or even if u know how to make a rom image from your phone so I can flash back onto mine.
Click to expand...
Click to collapse
Its phone#@android.ntelos.com
And please let me know if u find working roms
tecknogod said:
Hey. I have an Ntelos Showcase also. Unfortuately I accidenly flashed a US Cellular ROM onto it and screwed it all up. I have an NTELOS or supposedly NTELOS rom back on it now but cant get data to work. Can u do ##data# on your phone and look to see what your user name is? i think its phone#@ntelospcs.net but im not sure. Any settings you can gather for me would be appreciated! or even if u know how to make a rom image from your phone so I can flash back onto mine.
Click to expand...
Click to collapse
I did the same thing. Did you ever fix it? thanks!
Can someone point me in a direction on how to flash phones to ntelos i know u need cdma workshop and the other one qpst or whatever and u need the prl and meid i think it is but im still not sure what all to do! i am on limited income and need to go to pre paid right now i have a sprint evo 4g id like to start with that one! also is it pretty much the same for every phone? so if i figure out the evo 4g will the other phone i buy for my girl be the same? are lte phones different to flash? Thanks to anyone who will help me!

[Q] CSpire GS3 SCH-L710 rom???

Hey guys
CSpire Wireless formerly Cellular South has finally released their Galaxy S3. The model number is SCH-L710. The reason I am asking this question here and not in a different carriers forum is the L710 in model number. I don't pretend to understand why certain carriers GS3's are labeled with different model numbers, but I thought that since your GS3 and mine both have L710 I thought that possibly the hardware was closer to the same than say verizon's which is a completely different model designation. That being said I am desperate for a custom rom but don't wanna just go flashing any GS3 roms out there to see if any will work on my network. I would feel more comfortable knowing that I had a way to odin flash a stock rom in case any problems arise. Anyway if someone is kind enough and generous enough to help me locate a stock odin flashable rom, then I would be willing to help in any way I can to find a usable rom or port for my version of this great phone.
Thank you so much in advance
I went ahead and flashed the latest CM10 nightly for the Sprint version. Everything seems to be fine, except for data. I still have data, but it is very flaky and won't hardly hold a signal. I suspect it to be the PRL or CM itself.
We definitely need a stock rom for CSpire. I am willing to help any way I can.
abcleanonme said:
I went ahead and flashed the latest CM10 nightly for the Sprint version. Everything seems to be fine, except for data. I still have data, but it is very flaky and won't hardly hold a signal. I suspect it to be the PRL or CM itself.
We definitely need a stock rom for CSpire. I am willing to help any way I can.
Click to expand...
Click to collapse
find the proper PRL for C Spire and use this method (http://forum.xda-developers.com/showthread.php?t=1880781) to flash it
nicholaaaas said:
find the proper PRL for C Spire and use this method (http://forum.xda-developers.com/showthread.php?t=1880781) to flash it
Click to expand...
Click to collapse
Good luck finding that. Cspire keeps things like that unattainable. Unless *228 will work properly to update prl. Should anyone come across it please let me know. Bout to flash CM10
What about using QPST or something to pull the PRL off of a stock device? Can we get someone to do this before flashing any ROMs?
Okay. First of all, I didn't think to look at the PRL before I went and flashed the Sprint CM10. But now it says 20005. I restored my nandroid backup and pulled this PRL from my phone with QPST 2.7.374. In DFS Tool, I noticed there was a CSpire PRL 10009. I wrote this PRL to the Phone and am getting much better service on the stock TW ROM.
HOWEVER, I flashed the Sprint CM10 again and the same thing happened. It says PRL 10009, but there is little to no service and when it does have a little service, it is very flaky and eventually ends up with no data connection at all. Any more suggestions or ideas?
abcleanonme said:
What about using QPST or something to pull the PRL off of a stock device? Can we get someone to do this before flashing any ROMs?
Click to expand...
Click to collapse
after a few hours of trying to get my phone into diagnostic mode i found this that worked. *#22745927 then enable hidden menu then *#7284#
now i think i need to find a newer version of qpst so that it will recognize my phone.
This one worked for me: https://www.dropbox.com/s/tcfsxo5d6vsxfnn/QPST.2.7.374.rar
abcleanonme said:
This one worked for me: https://www.dropbox.com/s/tcfsxo5d6vsxfnn/QPST.2.7.374.rar
Click to expand...
Click to collapse
while i try to get qpst to read my phone can you please upload a copy of our prl and link it please
abcleanonme said:
This one worked for me: https://www.dropbox.com/s/tcfsxo5d6vsxfnn/QPST.2.7.374.rar
Click to expand...
Click to collapse
pm me please
here are some useful links i found.
http://androidforums.com/lg-optimus-m/419514-how-get-prl-off-your-phone.html
http://www.s3forums.com/forum/galaxy-s3-hacking-mods/1614-backup-qpst-backup-your-nv-data-imei-us-variants.html
abcleanonme said:
here are some useful links i found.
http://androidforums.com/lg-optimus-m/419514-how-get-prl-off-your-phone.html
http://www.s3forums.com/forum/galaxy-s3-hacking-mods/1614-backup-qpst-backup-your-nv-data-imei-us-variants.html
Click to expand...
Click to collapse
qpst still says no phone under the phone column no matter what i try
So far, this is what I have done:
First I used the following tool to download drivers for my phone and root ( via option 4 in the program).
http://forum.xda-developers.com/showthread.php?t=1746680
I used CWM to make a nandroid backup.
Next, I flashed the latest CM nightly for the Sprint version here:
http://get.cm/?device=d2spr
After doing this, everything worked fine, EXCEPT for data. I dialed *228 and let it do its thing. I actually had data, but the signal was extremely weak and very flaky. After messing with settings it would usually drop it altogether.
I restored my nandroid backup and noticed that although I had data, it seemed to be weaker than before ( although that may just be me).
I decided to follow the following guide on how to get the PRL from the phone:
http://androidforums.com/lg-optimus-m/419514-how-get-prl-off-your-phone.html
The version of QPST on that post was outdated, so I found and used QPST 2.7.374, which I posted a link to earlier in the thread.
I managed to copy the 20005 PRL off of my phone and saved it.
I then started up DFS Tool and wrote the CSpire 10009 PRL to my phone.
I get much better service on the stock ROM, but the Sprint CM builds still do the same thing. No data.
UPDATE: I did a *228 to get back on the 20005 PRL and it is working just as well as the 10009 PRL now.
Also, as OBSt4l0n discovered, there's simultaneous voice and data. Not sure if anyone else has noticed this or if this was happening before flashing roms
and PRL's.
Okay. We no longer believe it's the PRL causing the problems. More info to come. May be slower over the weekend with weekend stuff and all.
Sent from my SCH-L710 using xda premium
abcleanonme said:
Okay. We no longer believe it's the PRL causing the problems. More info to come. May be slower over the weekend with weekend stuff and all.
Sent from my SCH-L710 using xda premium
Click to expand...
Click to collapse
Thanks for the update. I thought everybody had long abandoned trying to port a rom to the cspire gs3 lol.
bone39367 said:
Thanks for the update. I thought everybody had long abandoned trying to port a rom to the cspire gs3 lol.
Click to expand...
Click to collapse
Out of curiosity, Could it be the APN's causing the issues? And from what I've seen the vzw variant seems closer to the cspire. but its hard to say. Just to try and eliminate possible causes, I would reccomend flashing this here and see if you get the same issues. http://goo-inside.me/devs/aokp/d2vzw/aokp_d2vzw_jb_build-4.zip Its AOKP for the vzw variant. I have used it as my daily driver for the past week and I'm on Sprint. Dont have to change anything in it, just flash.
Just my 2 cents
billard412 said:
Out of curiosity, Could it be the APN's causing the issues? And from what I've seen the vzw variant seems closer to the cspire. but its hard to say. Just to try and eliminate possible causes, I would reccomend flashing this here and see if you get the same issues. Its AOKP for the vzw variant. I have used it as my daily driver for the past week and I'm on Sprint. Dont have to change anything in it, just flash.
Just my 2 cents
Click to expand...
Click to collapse
Thanks. I'm tempted to try this but the only problem is I don't have a way of going back to stock. I did, however make a backup through cwm but I wish there was an absolute stock cspire rom out there. I would love to test out developer's roms and provide feedback if somebody knows where I could get a stock rom to flash for cspire's gs3....
bone39367 said:
Thanks. I'm tempted to try this but the only problem is I don't have a way of going back to stock. I did, however make a backup through cwm but I wish there was an absolute stock cspire rom out there. I would love to test out developer's roms and provide feedback if somebody knows where I could get a stock rom to flash for cspire's gs3....
Click to expand...
Click to collapse
I've been trying to find out.... without success.....
billard412 said:
Out of curiosity, Could it be the APN's causing the issues? And from what I've seen the vzw variant seems closer to the cspire. but its hard to say. Just to try and eliminate possible causes, I would reccomend flashing this here and see if you get the same issues. http://goo-inside.me/devs/aokp/d2vzw/aokp_d2vzw_jb_build-4.zip Its AOKP for the vzw variant. I have used it as my daily driver for the past week and I'm on Sprint. Dont have to change anything in it, just flash.
Just my 2 cents
Click to expand...
Click to collapse
Just tried this and still no data. We need a dev to look into this. Apparently there is something internal in code stopping our radio from functioning properly. I have attempted to pull my RIL file and insert it in cm10 then rebooting and no luck. Still no data. Any devs out there willing to look into this for us?
Sent from my SCH-L710 using xda app-developers app
Bump ****

Categories

Resources