Related
Hi All,
I've been flashing stock based ROMs for a little while, and I think I've noticed a universal problem.
I would be posting this is the specific ROM forums, but my post count is too low.
The problem:
When ever I attempt to edit, specifically, add a lockscreen shortcut, Settings crashes, and I get a message "Unfortunately, Settings has crashed."
This has happend on both the ATT galaxy S3 LoserRom, and the new Ultimatum. On the DJ JohnnyBlaze ROM, i do believe it worked properly, but that was ported from TMobile, I think.
If anyone has any suggestions/advice/power to move this thread to the LoserROM or Ultimatum ROM forums, it'd be greatly appreciated!
Thanks!
No issue here with my ultimatum ROM on my at&t s3 and with quadrant benchmarks like these I would not mind anyway
Sent from my SAMSUNG-SGH-I747 using XDA Premium HD app
Stankydanky702 said:
No issue here with my ultimatum ROM on my at&t s3 and with quadrant benchmarks like these I would not mind anyway
Sent from my SAMSUNG-SGH-I747 using XDA Premium HD app
Click to expand...
Click to collapse
I'm going to assume you're using a kernel that allows over clocking? which one?
Russ77 said:
I'm going to assume you're using a kernel that allows over clocking? which one?
Click to expand...
Click to collapse
Ktoonsez came with the Ultimatum rom oc at 2100mhz
io-noop
Governor -performance
Sent from my SAMSUNG-SGH-I747 using XDA Premium HD app
thegreatscott said:
...
When ever I attempt to edit, specifically, add a lockscreen shortcut, Settings crashes, and I get a message "Unfortunately, Settings has crashed."
...
Click to expand...
Click to collapse
I had the same problem on a rooted stock ROM.
Disable the Developer options in Settings and try again. This solved the problem for me.
I know this is a noob question bjt what is Chainfire? I heard before kn XDA TV but dont understand what is used for.... I also tried ro install the Chainfire 3D driver but my phone didn't boot after that... Now im currently using CM9 RC2.... Can i install the driver?
Sent from my GT-I8150 using xda app-developers app
Its used gaming for gaming for better graphic and performance
Sent from my GT-I8150 using xda premium
From what I have experienced using it, is that it lowers down the graphic performance so that the game can run smoothly. Speed at the cost of high end graphics
Sent from my GT-I8150 using xda premium
It is a GUI modification software, it is capable of lowering down graphic details so that a certain program can run in lower performance phones. But it does not support most games though, I tried, uninstalled. It can even reduce quality of your launcher if you wanted to. But then your phone will look bad.
all the previous posts are relatively correct but ill just tell you one thing
chainfire 3D DOESN'T SUPPORT ICS ROMS (ur currently on cm9 which is ics)
It works on MIUI (CM9 BASED). I've tried
Sent from my GT-I8150 using xda premium
imadiu said:
It works on MIUI (CM9 BASED). I've tried
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
the dev of the app was the one who said his app doesn't support ics or jb (it has no improvement when its installed and applied, no changes are done) so i guess if u can see any improvement using it on miui, u shall tell him
TiTAN-O-One said:
I know this is a noob question bjt what is Chainfire? I heard before kn XDA TV but dont understand what is used for.... I also tried ro install the Chainfire 3D driver but my phone didn't boot after that... Now im currently using CM9 RC2.... Can i install the driver?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
In a nutshell:
Gingerbread ROMs are known to have incomplete OpenGL ES support. 3D games *require* OpenGL ES. Chainfire 3D adds the necessary drivers to Gingerbread.
-- Sent from a GT-I8150 running ICS perfectly well. F'U, Sams#!t --
Thanks everyone for the BIG replies... Anyway I tried installing it on my CM9 ROM and it does work cos' i think i set everything to perfomance graphics and then when i reboot, EVERYTHING become distorted including the icons... Temple Run does work weirdly but it SO smooth using it... Now, due to my MASS flashing power, Im using MIUI and i will install Chainfire 3d
Sent from my GT-I8150 using xda app-developers app
TiTAN-O-One said:
Thanks everyone for the BIG replies... Anyway I tried installing it on my CM9 ROM and it does work cos' i think i set everything to perfomance graphics and then when i reboot, EVERYTHING become distorted including the icons... Temple Run does work weirdly but it SO smooth using it... Now, due to my MASS flashing power, Im using MIUI and i will install Chainfire 3d
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
MASS Flashing Power.
The Super Power of all XDA Members euahueahua
Yesh!!!
Sent from my GT-I8150 using xda app-developers app
mosta_9741 said:
all the previous posts are relatively correct but ill just tell you one thing
chainfire 3D DOESN'T SUPPORT ICS ROMS (ur currently on cm9 which is ics)
Click to expand...
Click to collapse
imadiu said:
It works on MIUI (CM9 BASED). I've tried
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
i've been using this app since my GB days with my wonder,,
and i can say that its working for me,,,
i've tried it with raiden legacy,, reduce to 16 bit,,, and now there's no white screen problem within the game compared to playing this one without chainfire3d
NICE! So in order to make gaming smoother, i have to reduce to 16 BIT? I tried with CM9 once and icons became distorted... :/ What configs do you use ?
Sent using my Smoothie ICS ROM
im on cm9 rc1 castagnaIT kernel 7.5
Xperia Launcher
CF3D v3.3
per-app OpenGL
Xperia Launcher
unroll textures --check
USED PLUGin -- Nvidia
just want to ask did u guys have the qrngd in the /system folder after using chainfire3d?coz i have that file and it messing with the seederv7 that i flash.
afif_7070 said:
just want to ask did u guys have the qrngd in the /system folder after using chainfire3d?coz i have that file and it messing with the seederv7 that i flash.
Click to expand...
Click to collapse
nope,,, i dont see one,, using root xplorer
I having a black screen when i select some games. The game seens to load, sound efects and etc, but no grafics, only a black screen. It is no happens in every game, just some. I´m using Slimbeam with stock kernel, and Seeder V7. There a configuration or some trick to solve this?
try using CHAINFIRE3d.....
If the game stays that way and TK asks for FC of the game, the game most likely don't fit your device. Try going pristine, and use kernel with bigmem.
I faced the same situation too... Jelly Bean sometimes cant run games like beach buggy blitz and Riptide gp... I use CM10 and SlimBean... Than i switch to ICS because its still not working...
Sent using my Smoothie ICS ROM
nisiomorais said:
I having a black screen when i select some games. The game seens to load, sound efects and etc, but no grafics, only a black screen. It is no happens in every game, just some. I´m using Slimbeam with stock kernel, and Seeder V7. There a configuration or some trick to solve this?
Click to expand...
Click to collapse
TiTAN-O-One said:
I faced the same situation too... Jelly Bean sometimes cant run games like beach buggy blitz and Riptide gp... I use CM10 and SlimBean... Than i switch to ICS because its still not working...
Sent using my Smoothie ICS ROM
Click to expand...
Click to collapse
My suggestion is going pristine and if it is still there then try a GB rom and check if it is still there
santiagoruel13 said:
try using CHAINFIRE3d.....
Click to expand...
Click to collapse
The Dev said it won't work on ICS/JB some one said it worked on MIUI ICS but no one said it will work on JB, so no one should risk
Quite wrong, ICS will work... Its only jelly bean ROMS...
Sent using my Smoothie ICS ROM
Ok, chainfire won´t work, i actually instaled this Rom at Pristine way, the game shows no FC... I´m using the SlimBeam´s defaut kernel, Ondemand governor. Shoud I try another Kernel, so what Kernel do you suggest?
Thank you guys!
nisiomorais said:
Ok, chainfire won´t work, i actually instaled this Rom at Pristine way, the game shows no FC... I´m using the SlimBeam´s defaut kernel, Ondemand governor. Shoud I try another Kernel, so what Kernel do you suggest?
Thank you guys!
Click to expand...
Click to collapse
Backup using CWM and go GB for sometime, try the same games and give me a feedback
I personally love hadi's kernel, try it and tell me whaf do you think.
Sent from my GT-I8150 using xda app-developers app
7amada100 said:
Backup using CWM and go GB for sometime, try the same games and give me a feedback
I personally love hadi's kernel, try it and tell me whaf do you think.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Is this? http://forum.xda-developers.com/showthread.php?t=2076332
nisiomorais said:
Is this? http://forum.xda-developers.com/showthread.php?t=2076332
Click to expand...
Click to collapse
yes, and try hadi's config
7amada100 said:
yes, and try hadi's config
Click to expand...
Click to collapse
Doesn´t work, my fone got softbrick... weird... Tomorow i will check with Hadi on his tread about a solution for this instalation
Restoring now, thanks anyway!
You're using SlimBean... Hadiconfig is ICS... One of his version is for JB... Did you download tht?
Sent using my Smoothie ICS ROM
Yes, of course
Shoud i have to wipe data or do something before?
Sent from my GT-I8150 using xda app-developers app
nisiomorais said:
Yes, of course
Shoud i have to wipe data or do something before?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
no no, kernel flashing only need wipe cache/dalvik cache
TiTAN-O-One said:
You're using SlimBean... Hadiconfig is ICS... One of his version is for JB... Did you download tht?
Sent using my Smoothie ICS ROM
Click to expand...
Click to collapse
Hadi made a whole new thread for the JB Version
Sent from my GT-I8150 using xda app-developers app
Oh... CM10 thingy... Now i remembered.. My bad
Sent using my Smoothie ICS ROM
Hello.
Every 3. Day i install a new Software on my Ace 2 to test the Performance and Bugs. But now i want go back to the Touchwiz Stock Roms (But with Custom Rom like Italian Job). I tried Kryllios, Italian Job. But i want another. What can you say me about Judas77's Minimal & Judas77's Minimal Zero? Whats the difference?
Now what i really need:
-Good Battery Time.
-No freezing Screen (In Games & At Launcher).
-Fast and Smooth.
-Bugfree
NO CM! STOCK TW ROM WITH CUSTOM ROM!
Thank you!
Minimal 1.6 and set govs
EDIT: but for modified stock i cant guarantee no freeze
Sent from my GT-I8160 using xda app-developers app
Hello and thanks for your reply!
I installed Minimal 1.6 and iam wondered! Its smooth . What do you mean with set govs?
lolmann101 said:
Hello and thanks for your reply!
I installed Minimal 1.6 and iam wondered! Its smooth . What do you mean with set govs?
Click to expand...
Click to collapse
I believe that it means set cpu governor. Basically you can set how your CPU act based on various parameter.
About these parameters, I'm afraid I can't give you any advice, because everyone has different needs, and me myself, I prefer the default setting.
antok.tm said:
I believe that it means set cpu governor. Basically you can set how your CPU act based on various parameter.
About these parameters, I'm afraid I can't give you any advice, because everyone has different needs, and me myself, I prefer the default setting.
Click to expand...
Click to collapse
I never changed the CPU Governor at any Rom i've ever had.
I tried a few minutes the Minimal 1.6 and i can say that its smooth .
A few Hours later i will give my last feedback and then we can close this thread .
When not i will continue Search.
€: I have one Problem. I cant sync Music ( It says i dont have Music on my Device). I have modified vold.stab.
Yes, govs means governor. I recommend flashing d-kernel too. I set performance/sio, but yours doesnt have to be the same. About music, wait few hours then see if it appears.(it should, mine did)
Sent from my GT-I8160 using xda app-developers app
teddytsen said:
Yes, govs means governor. I recommend flashing d-kernel too. I set performance/sio, but yours doesnt have to be the same. About music, wait few hours then see if it appears.(it should, mine did)
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Okay thanks! Ill try to flash dkernel (i have no idea how to deal with terminal emulator but ill try)
Sent from my GT-I8160 using xda app-developers app
Flash with cwm -.-
Sent from my GT-I8160 using xda app-developers app
Alrighty guys and gals, as promised here is my multimod flashable zip for MK7(THIS IS ONLY FOR DEODEXED ROMS!!!!!!)Now, onto the fun stuff..
What it includes:
1. 1% battery mod
2.ink effect any color super ripple( this is controlled by an app now
3. 30, yeeup 30!!! Freakin' native touchwiz toggles..including flashlight, clean ram, and 4 way reboot toggle
4. 4 way reboot power button mod
5. Custom pulldown background image
Bugs:
A couple :
1. Air gesture, air view, and personal mode toggles dont work(obviously.. because we don't have an s4 or n3 now do we? Lol) not to say that if n3 features are successfully ported that some won't work, but i'm not porting it..lol
2. To see/enable all toggles after flashing you might need to go to your edit toggles screen and push reset(this can be found in settings app/ my device / display / notification panel)
3. For light flare lockscreen go to settings app / my device /display / lock screen / unlock effect...tick light flare...To enable ink effect instead, tick ripple effect, exit settings and click on the ink color changer app in your app drawer..tick enable ink effect and pick any color..profit
4. WIFI ISSUES HAVE BEEN FIXED IN V2, DEVS MAY INCLUDE THIS IN A ROM NOW AS WELL(just thank me and the people mentioned if you do..) AND IT CAN BE FLASHED OVER ANY KERNEL, EVEN A BONE STOCK KERNEL WITH NO ISSUES AT ALL!!!!!
Again, for the third time..DO NOT FLASH THIS OVER AN ODEXED ROM, YOU WILL BORK YOUR SYSTEM!!!! If you aren't sure if it is or not read the op for the rom you are on, or ask someone in that particular thread
Confirmed working beautifully on:
Jedi master 4.3 rom
Swarm stock rom
I have been in contact with edkeys and we are trying to figure out the odex issue but nothing yet...when we have something concrete it'll be uploaded for ya guys
THE THANKS PART!!!
Please..i cannot stress it enough, take the time to thank these people on their respective threads as you would not be basking in the glory of this mod if it weren't for them..
1.Ffalete : For posting a version of the toggles mod on xda( also for his ext.jar from said mod, i couldn' t get ours to compile at all with these edits)
http://forum.xda-developers.com/showthread.php?t=2632173
2.Groucho : Awesome tutorial for the s3, and its how i did the toggles!
http://www.esp-desarrolladores.com/showthread.php?t=2359
3.Cnexus : This guy is a smali modding beast..lol, he has his own version of the torch mod and has done countless other mods and things in the sprint section, and has tried to help me however he could to get this going.
http://forum.xda-developers.com/showthread.php?t=2617564
4.Psycho4us4 : for testing and support!! You can find him all over these threads, thank him damnit!!
5.MattLowry : For the swarm rom and for testing this out!!!
http://forum.xda-developers.com/showthread.php?t=2564430
6.Edkeys : For the conch republic build of MK7 and for borking his system and testing..lol
http://forum.xda-developers.com/showthread.php?t=2631278
Screenshots will be in post # 2
Download :
http://www.androidfilehost.com/?fid=23329332407582097
Enjoy!
Sent from my SGH-T889 using xda app-developers app
Screenshots:
Sent from my SGH-T889 using xda app-developers app
Very nice looking work.
Hastily spouted for your befuddlement
Do i only need to flash it via recovery?
Sent from my SGH-T889V using xda app-developers app
Thanks coug!!! Good to see ya again!! Yeeup, all ya need to do is flash it, but i cant stress enough..DO NOT..REPEAT..DO NOT FLASH THIS IF YOU ARE RUNNING CONCH REPUBLIC OR CIPHERCODES ROM!!!!
Sent from my SGH-T889 using xda app-developers app
Excellent work manufan721! Glad you got this working
Sent from my LG-D959 using Tapatalk
i have question my wifi no workin no switch on
Sent from my SGH-T889 using xda app-developers app
Thanks! Working good here on Jedi, glad to have flashlight back and also the toggles for the S4/Note3 stuff to tinker with ....Not really working, but makes it easy to access the menu's for the settings.
Chris
boricua6 said:
i have question my wifi no workin no switch on
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Had the same issue. It seemed to popup after a reboot. I dirty flashed my rom (swarm v2) and all is fine and I still have all toggles.
Sent from my SGH-T889 using xda app-developers app
boricua6 said:
i have question my wifi no workin no switch on
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Thats an odd issue guys, are you both on swarm? What kernel are you using?
Sent from my SGH-T889 using xda app-developers app
manufan721 said:
Thats an odd issue guys, are you both on swarm? What kernel are you using?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I'm on swarm using kernel that came with it. Misspoke earlier, 25 toggles after dirty flash. Will reflash mod and see if issue pops back up.
Sent from my SGH-T889 using xda app-developers app
---------- Post added at 03:54 AM ---------- Previous post was at 03:28 AM ----------
Confirmed. Reflashed and no wifi. Wont turn on with toggle or system toggle.
Sent from my SGH-T889 using xda app-developers app
that seems to me like a kernel problem conflicting with the mod..no offense meant at all to the devil kernel devs as theyve worked hard to develop it but me personally im not a huge fan..it locks up and causes reboots constantly do me a favor and try a different kernel..whether its stock or my personal favorite agni..dont have a link to agni but can find it if ya need me to..try reflashing the mod and switch kernels and please report back..we'll get to the bottom of this..promise
Sent from my SGH-T889 using xda app-developers app
Also..check to make sure that md5 matches on both swarm rom and my mod..if it doesnt that could be the problem as well
Sent from my SGH-T889 using xda app-developers app
xmv540 said:
I'm on swarm using kernel that came with it. Misspoke earlier, 25 toggles after dirty flash. Will reflash mod and see if issue pops back up.
Sent from my SGH-T889 using xda app-developers app
---------- Post added at 03:54 AM ---------- Previous post was at 03:28 AM ----------
Confirmed. Reflashed and no wifi. Wont turn on with toggle or system toggle.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
My apologies guys, this mod is still in early phases of usage on our forum..After some testing on my phone I can confirm it is a kernel issue..This mod unfortunately will only work with a custom kernel such as agni or devil..WILL NOT WORK WITH STOCK KERNEL..I will be updating op soon with this info and links to both kernels, again..really sorry about the wifi issue guys my testers and I were on custom kernels and everything worked fine so it wasn't even thought of to be completely honest..so deodexed, custom kernel..uggh
Sent from my SGH-T889 using xda app-developers app
manufan721 said:
My apologies guys, this mod is still in early phases of usage on our forum..After some testing on my phone I can confirm it is a kernel issue..This mod unfortunately will only work with a custom kernel such as agni or devil..WILL NOT WORK WITH STOCK KERNEL..I will be updating op soon with this info and links to both kernels, again..really sorry about the wifi issue guys my testers and I were on custom kernels and everything worked fine so it wasn't even thought of to be completely honest..so deodexed, custom kernel..uggh
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
just an idea but could it be selinux messing with the mod? stock kernel I believe is set to enforcing but devil kernel I know is set to permissive (probably agni also). someone try using selinux mode changer app to test this idea
mattlowry said:
just an idea but could it be selinux messing with the mod? stock kernel I believe is set to enforcing but devil kernel I know is set to permissive (probably agni also). someone try using selinux mode changer app to test this idea
Click to expand...
Click to collapse
Negative on selinux mode changer. Still no wifi.
Sent from my SGH-T889 using xda app-developers app
I had these issues sometimes with my mods also.
Just reflash your kernel after (agni or w.e) and wifi will come back.
Also nice work @manufan721
Sent from my lightning fast Note II running MeanBean 2.0 SuperCharged
xmv540 said:
Negative on selinux mode changer. Still no wifi.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Yeah, i tried it as well, no go....havent tried to reflash a stock kernel after though..i'll hafta test that out..lol..not sure why people would even wanna stick to a stock kernel anyway when agni has everything you could want with init.d support, boeffla, and overclocking..but to each their own i guess..ill test reflashing a stock kernel later today and let ya know and i appreciate the thanks for the mod man, took me 2 weeks to figure it out..lol
Sent from my SGH-T889 using xda app-developers app
Gonna try it on gummy rom.
Thank you
No LoGiC said:
Gonna try it on gummy rom.
Thank you
Click to expand...
Click to collapse
this is for touchwiz 4.3 roms not aosp based roms