I know this is a noob question bjt what is Chainfire? I heard before kn XDA TV but dont understand what is used for.... I also tried ro install the Chainfire 3D driver but my phone didn't boot after that... Now im currently using CM9 RC2.... Can i install the driver?
Sent from my GT-I8150 using xda app-developers app
Its used gaming for gaming for better graphic and performance
Sent from my GT-I8150 using xda premium
From what I have experienced using it, is that it lowers down the graphic performance so that the game can run smoothly. Speed at the cost of high end graphics
Sent from my GT-I8150 using xda premium
It is a GUI modification software, it is capable of lowering down graphic details so that a certain program can run in lower performance phones. But it does not support most games though, I tried, uninstalled. It can even reduce quality of your launcher if you wanted to. But then your phone will look bad.
all the previous posts are relatively correct but ill just tell you one thing
chainfire 3D DOESN'T SUPPORT ICS ROMS (ur currently on cm9 which is ics)
It works on MIUI (CM9 BASED). I've tried
Sent from my GT-I8150 using xda premium
imadiu said:
It works on MIUI (CM9 BASED). I've tried
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
the dev of the app was the one who said his app doesn't support ics or jb (it has no improvement when its installed and applied, no changes are done) so i guess if u can see any improvement using it on miui, u shall tell him
TiTAN-O-One said:
I know this is a noob question bjt what is Chainfire? I heard before kn XDA TV but dont understand what is used for.... I also tried ro install the Chainfire 3D driver but my phone didn't boot after that... Now im currently using CM9 RC2.... Can i install the driver?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
In a nutshell:
Gingerbread ROMs are known to have incomplete OpenGL ES support. 3D games *require* OpenGL ES. Chainfire 3D adds the necessary drivers to Gingerbread.
-- Sent from a GT-I8150 running ICS perfectly well. F'U, Sams#!t --
Thanks everyone for the BIG replies... Anyway I tried installing it on my CM9 ROM and it does work cos' i think i set everything to perfomance graphics and then when i reboot, EVERYTHING become distorted including the icons... Temple Run does work weirdly but it SO smooth using it... Now, due to my MASS flashing power, Im using MIUI and i will install Chainfire 3d
Sent from my GT-I8150 using xda app-developers app
TiTAN-O-One said:
Thanks everyone for the BIG replies... Anyway I tried installing it on my CM9 ROM and it does work cos' i think i set everything to perfomance graphics and then when i reboot, EVERYTHING become distorted including the icons... Temple Run does work weirdly but it SO smooth using it... Now, due to my MASS flashing power, Im using MIUI and i will install Chainfire 3d
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
MASS Flashing Power.
The Super Power of all XDA Members euahueahua
Yesh!!!
Sent from my GT-I8150 using xda app-developers app
mosta_9741 said:
all the previous posts are relatively correct but ill just tell you one thing
chainfire 3D DOESN'T SUPPORT ICS ROMS (ur currently on cm9 which is ics)
Click to expand...
Click to collapse
imadiu said:
It works on MIUI (CM9 BASED). I've tried
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
i've been using this app since my GB days with my wonder,,
and i can say that its working for me,,,
i've tried it with raiden legacy,, reduce to 16 bit,,, and now there's no white screen problem within the game compared to playing this one without chainfire3d
NICE! So in order to make gaming smoother, i have to reduce to 16 BIT? I tried with CM9 once and icons became distorted... :/ What configs do you use ?
Sent using my Smoothie ICS ROM
im on cm9 rc1 castagnaIT kernel 7.5
Xperia Launcher
CF3D v3.3
per-app OpenGL
Xperia Launcher
unroll textures --check
USED PLUGin -- Nvidia
just want to ask did u guys have the qrngd in the /system folder after using chainfire3d?coz i have that file and it messing with the seederv7 that i flash.
afif_7070 said:
just want to ask did u guys have the qrngd in the /system folder after using chainfire3d?coz i have that file and it messing with the seederv7 that i flash.
Click to expand...
Click to collapse
nope,,, i dont see one,, using root xplorer
Related
As the title suggests, why doesn't gamecih work with our galaxy w?
Sent from my GT-I8150 using XDA
Gary122 said:
As the title suggests, why doesn't gamecih work with our galaxy w?
Sent from my GT-I8150 using XDA
Click to expand...
Click to collapse
I used to have this problem as you but i found this problem can solve by flash another rom. So it could be a bug of rom.
Thanks for the reply! Can I know what tomorrow you are using and if you think gamecih works on black notes?
Sent from my GT-I8150 using XDA
I tried gamecih in FAW rom but it doesn't work. Now I install cm9 and gamecih works
Posted by Joshua. If I have been helpful, press the button thanks.
blacknotes wont work on hybrid nor f.a.w as far as i know ...
i think its the framework prob ... because gamecih wont work on official ics and xlm8 is base on ics ?(im just making conclution please right me if im wrong )
ps sorry for my bad spelling and grammar
gamecih worked before an update. before this ics devices were buggy so the devs decided 'lets try make it compatible with ics' so they did but by doing this it deleted compatibility with all the 3.X.X devices and below. so now theyre trying to fix it but in the meantime until another update, try an outdated version. an outdated version will work. roms dont matter (unless its an ics rom. any rom that has ics should work.) they basicly balls'd everything up in the latest update.
Sent From The Phone Of Gamers
Can you upload a link to the older version?
Sent from my GT-I8150 using XDA
heres gamecih2:
http://download.pandaapp.com/android-app/gamecih2-cheating-hacker-2.2.2-id5198.html
Sent From The Phone Of Gamers
It crashed on my phone too I'm using the new rebelrom
Sent from my GT-I8150 using XDA
Gary122 said:
It crashed on my phone too I'm using the new rebelrom
Sent from my GT-I8150 using XDA
Click to expand...
Click to collapse
gamecih2? because thats no suprise if ur using a rom that isnt cm7/9. it may work on ur rom so check that usb debugging is on. if not then thats definately the rom. stock rom and cm9 are the only 2 roms that are definately confirmed working. others have a high chance of not working
Sent From The Phone Of Gamers
is your rebelrom using the lates xlm8 ?? if it does non of the cheating app will work even gameguardian ... i've tested it and fail.
its not the usb debug prob , but its the patch on the latest kernel
Try alternate cheat engine. Been using gamekiller trial version.
( ∩_∩ )づ Ħăiii˚ all
I love game and for me gamecih is important. I'm using xxlm6 which gamecih not working.. when I'm read on xda, I change my kernel to cow kernel and then gamecih is work perfect. If you want, you can use cow kernel for cheat game, after finish cheat your game, flash again to stock kernel or not...
Sorry for my english
Sent from my Galaxy Wonder using Tapatalk
Today i try with a version that i use in The original firmware But Now with faw rom don't work
Inviato dal mio GT-I8150 con Tapatalk 2
ianbkp2003 said:
( ∩_∩ )づ Ħăiii˚ all
I love game and for me gamecih is important. I'm using xxlm6 which gamecih not working.. when I'm read on xda, I change my kernel to cow kernel and then gamecih is work perfect. If you want, you can use cow kernel for cheat game, after finish cheat your game, flash again to stock kernel or not...
Sorry for my english
Sent from my Galaxy Wonder using Tapatalk
Click to expand...
Click to collapse
after i read your comment, i'm directly try to change cow kernel in my stock ROM DXLM3..
and boom! gameCIH it's working (USB debugging ON)..
thank you..
Vcliex said:
after i read your comment, i'm directly try to change cow kernel in my stock ROM DXLM3..
and boom! gameCIH it's working (USB debugging ON)..
thank you..
Click to expand...
Click to collapse
It works on ics too
Sent from my GT-I8150 using xda app-developers app
Gary122 said:
It works on ics too
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Not possible. GameCih doesn't work on ICS
Sent from my Samsung Galaxy W (GT-I8150) with CM9 Beta 1
iDelta said:
Not possible. GameCih doesn't work on ICS
Sent from my Samsung Galaxy W (GT-I8150) with CM9 Beta 1
Click to expand...
Click to collapse
But I've used it on PES using biohazard rom
Sent from my GT-I8150 using xda app-developers app
Gamecih works well on ICS.
Sent from Galaxy Wonder (dxlm2) - CM9 Beta 1 - forvivo's kernel v3.0 - JB Adreno libs v3
How is that possible? I try to hack GT Racing using GameCih but no results show up.
Sent from my Samsung Galaxy W (GT-I8150) with CM9 Beta 1
I had installed v6 supercharger on rooted stock rom .
But am 75% supercharged, and if i used build rather than local will be 100% and is it safe or i will get bootloops
Also after installation temple run lags more than before?
Sent from my G Wonder
mohza said:
I had installed v6 supercharger on rooted stock rom .
But am 75% supercharged, and if i used build rather than local will be 100% and is it safe or i will get bootloops
Sent from my G Wonder
Click to expand...
Click to collapse
Go ahead....It will be fast n automatically done
Sent from my GT-I8150 using xda premium
So its safe to use build and i will get 100 % .. Right
Sent from my GT-I8150
Yeap...
Sent from my GT-I8150 using xda premium
Thanks am 100% supercharged now
Sent from my GT-I8150
Gaming on stock ROM is not that good unless you use ICS CM9
Sent from my GT-I8150 using xda premium
Ok . But Am waiting for stable cm9 as i need camera
Sent from my GT-I8150
OK FYI my younger son does not allow GB on my W due to his Gaming Experience
Sent from my GT-I8150 using xda premium
So i think cm9 is great maybe i will give it a try
Sent from my GT-I8150
mohza said:
So i think cm9 is great maybe i will give it a try
Sent from my GT-I8150
Click to expand...
Click to collapse
Check this running on GB
http://www.youtube.com/watch?v=5PlqEHDcMLU&feature=youtube_gdata_player
Sent from my GT-I8150 using xda premium
why everytime i want to use the script supercharged RC8 at Rebel ROM and I've installed busybox version 1.19 when I run it through a script manager always fails and "busybox not found" Can anyone help me?
Use busybox not busybox installer and use v 1.19.4
Sent from my GT-I8150
mohza said:
Use busybox not busybox installer and use v 1.19.4
Sent from my GT-I8150
Click to expand...
Click to collapse
Srericson BusyBox
This will allow you to uninstall existing busybox install, and then install latest bb version.....I think now V 1.20.1
It is an Installer, as Busybox is GNU Public License s/w maintained by Denys Vlasenko....
For BusyBox info see http://busybox.net
mohza said:
Ok . But Am waiting for stable cm9 as i need camera
Sent from my GT-I8150
Click to expand...
Click to collapse
I'm using the rebel rom 3.0.6 and temple run goes really well!
Can i install ram manager with v6 supercharger?
Also which is better to use alone?
Sent from my GT-I8150
can someone tell me what really v6 supercharge does to our Wonder? and what is needed to install and how. thanks.
kemaro30 said:
can someone tell me what really v6 supercharge does to our Wonder? and what is needed to install and how. thanks.
Click to expand...
Click to collapse
It makes the phone run faster and smoother by adjusting the Low Memory Killer values. So it keeps a minimum amount of free memory so that the current activity will be smooth and lag free. In my case I've also removed a lot of bloatware(all Samsung hubs,etc) to free up the memory and together with the V6 script my stock ROM runs very smooth. This is the main thread:
http://forum.xda-developers.com/showthread.php?t=991276
PS: I advise you choose the suggested minfree values using the built in super minfree calculator. These are working nicely for me.
Sent from my Wonder
mohza said:
Can i install ram manager with v6 supercharger?
Also which is better to use alone?
Sent from my GT-I8150
Click to expand...
Click to collapse
Will be any conflicts ?
Any replies
Sent from my GT-I8150
2g11 said:
It makes the phone run faster and smoother by adjusting the Low Memory Killer values. So it keeps a minimum amount of free memory so that the current activity will be smooth and lag free. In my case I've also removed a lot of bloatware(all Samsung hubs,etc) to free up the memory and together with the V6 script my stock ROM runs very smooth. This is the main thread:
http://forum.xda-developers.com/showthread.php?t=991276
PS: I advise you choose the suggested minfree values using the built in super minfree calculator. These are working nicely for me.
Sent from my Wonder
Click to expand...
Click to collapse
is it like the RAM Manger PRO? can switch to balance to gaming to multitasking by adjusting the free memory? so you aren't experiencing any lag even once?
kemaro30 said:
is it like the RAM Manger PRO? can switch to balance to gaming to multitasking by adjusting the free memory? so you aren't experiencing any lag even once?
Click to expand...
Click to collapse
Never used RAM Manager so can't say much about it. The lag will never be 100% gone purely because this is android and it's memory management is designed to work in a way that results in some amount of lag. But I must say it is almost lag free. Very good.
Sent from my Wonder
Hi guys, I opened this thread just to garner opinion about V6 supercharger and all other ram management scripts/apps, their effectiveness on our ICS roms. I use CM9 and just supercharged today, didn't really make a dramatic difference. In fact at times it feels more laggy than without supercharger. I'd like to know if anyone has a similar or different experience on any of the ICS roms for our phone.
2g11 said:
Hi guys, I opened this thread just to garner opinion about V6 supercharger and all other ram management scripts/apps, their effectiveness on our ICS roms. I use CM9 and just supercharged today, didn't really make a dramatic difference. In fact at times it feels more laggy than without supercharger. I'd like to know if anyone has a similar or different experience on any of the ICS roms for our phone.
Click to expand...
Click to collapse
Did u use the right way of using the v6,coz for ics u have to upload and download your system.jar from android mimics,bit different from the gb.
And i think v6 only would not be enough on ics,need more script like velocity or s97 juwe script and autokiller ram optimizer to boost the ram management that caused lag.
Sent from my EHNDROIX-i8150 using xda premium
dollyaja said:
Did u use the right way of using the v6,coz for ics u have to upload and download your system.jar from android mimics,bit different from the gb.
And i think v6 only would not be enough on ics,need more script like velocity or s97 juwe script and autokiller ram optimizer to boost the ram management that caused lag.
Sent from my EHNDROIX-i8150 using xda premium
Click to expand...
Click to collapse
Where can i find the other tweaks? Can you give me the link?
Sent from my BioWonder using xda premium
Try this one bro,the v6 already installed in this script. Just read first,nice script. It was built in my rom that im using right now.
http://forum.xda-developers.com/showthread.php?t=1854064
Sent from my EHNDROIX-i8150 using xda premium
dollyaja said:
Did u use the right way of using the v6,coz for ics u have to upload and download your system.jar from android mimics,bit different from the gb.
And i think v6 only would not be enough on ics,need more script like velocity or s97 juwe script and autokiller ram optimizer to boost the ram management that caused lag.
Sent from my EHNDROIX-i8150 using xda premium
Click to expand...
Click to collapse
Yes! Absolutely, I did the services.jar patch and got 100% supercharged. Still assessing the performance but at times its more laggy than without the supercharger.
dollyaja said:
Try this one bro,the v6 already installed in this script. Just read first,nice script. It was built in my rom that im using right now.
http://forum.xda-developers.com/showthread.php?t=1854064
Sent from my EHNDROIX-i8150 using xda premium
Click to expand...
Click to collapse
Thanks! Maybe I'll try out EHNDROIX soon. No lags at all?
Sent From My Wonder on CyanogenMod 9
dollyaja said:
Try this one bro,the v6 already installed in this script. Just read first,nice script. It was built in my rom that im using right now.
http://forum.xda-developers.com/showthread.php?t=1854064
Sent from my EHNDROIX-i8150 using xda premium
Click to expand...
Click to collapse
Which version of v6 that it use? And is it okay if i flash this mod and i use v6 by myself? Not from this rom?
Sent from my BioWonder using xda premium
I dont know which one but i check on system with root explorer theres a 99supercharger inside,i dont really know,but i have no problem at all using it for 3 days. Or u can ask on that freeky section.
Anyway,its better use one v6 script on ur system. Or it wont work at all,or maybe other issues
Sent from my EHNDROIX-i8150 using xda premium
dollyaja said:
I dont know which one but i check on system with root explorer theres a 99supercharger inside,i dont really know,but i have no problem at all using it for 3 days. Or u can ask on that freeky section.
Anyway,its better use one v6 script on ur system. Or it wont work at all,or maybe other issues
Sent from my EHNDROIX-i8150 using xda premium
Click to expand...
Click to collapse
I have asked the thread but no response atm. I know that. That's why if the included v6 is not the latest update from ics i will unsupercharge it and place the new one. That's why i need confirmation.
Sent from my BioWonder using xda premium
reddvilzz said:
I have asked the thread but no response atm. I know that. That's why if the included v6 is not the latest update from ics i will unsupercharge it and place the new one. That's why i need confirmation.
Sent from my BioWonder using xda premium
Click to expand...
Click to collapse
I think the best way to find out is try it yourself,still can unsupercharged when it doesnt comfort u
Sent from my EHNDROIX-i8150 using xda premium
dollyaja said:
I think the best way to find out is try it yourself,still can unsupercharged when it doesnt comfort u
Click to expand...
Click to collapse
Yeah, you right. The best way to find a tweak/script that suit you properly is to test it by your own.
Thus, I recommend guys to test other known script - Thunderbolt script
I will test this mod later, which include LMK supercharge also :laugh:
Wow.. nice one.. can i combine this tweak with v6, kick ass kernelizer, 3g, and geekny engine? Would have try it though if it can
Sent from my BioWonder using xda premium
reddvilzz said:
Wow.. nice one.. can i combine this tweak with v6, kick ass kernelizer, 3g, and geekny engine? Would have try it though if it can
Sent from my BioWonder using xda premium
Click to expand...
Click to collapse
V6-kickass-3g=match but i dont think for v6 and geeky,if you read previous from freeky,theres already v6 inside those scripts(freeky and greeky) but well,just suggestion..like i said we'll never now till we try.
Gudluck trying,and if you please post the review if you find those combinations match,thanks a bunch :beer:
Sent from my EHNDROIX-i8150 using xda premium
hmm..had testing alotz of script and tweak with arco cm9, however only freeky engine and forfivo kernel works the best for me..(no supercharge)
anyway this is my experience along with my device, so you guys may have different opinion with me, well
Woohooo... said:
hmm..had testing alotz of script and tweak with arco cm9, however only freeky engine and forfivo kernel works the best for me..(no supercharge)
anyway this is my experience along with my device, so you guys may have different opinion with me, well
Click to expand...
Click to collapse
Ah,question for u bro,did u combine the forfivo kernel with this freeky/geeky,if it yes,which forvivo that u used? Coz im using v1 kernel with this geeky,and its damn good. Just trying to get more better performance if its possible,need opinion,thks
Sorry bad english
Sent from my EHNDROIX-i8150 using xda premium
dollyaja said:
Just trying to get more better performance if its possible,need opinion,thks
Click to expand...
Click to collapse
Okie, I will give a short conclude on what I'm doing on my phone now.
You right, I using both forfivo kernel v2.2 with freeky engine, pretty good and smooth so far, at least less lag I see
But 1 thing should mention here, geeky engine make my phone more worst, feel slow sometimes (I asked the dev and he not sure the problem too). Test yourself and see how.
So if you use freeky engine, you should move xbin to system instead of system/etc, otherwise zipalign may not work
Woohooo... said:
Okie, I will give a short conclude on what I'm doing on my phone now.
You right, I using both forfivo kernel v2.2 with freeky engine, pretty good and smooth so far, at least less lag I see
But 1 thing should mention here, geeky engine make my phone more worst, feel slow sometimes (I asked the dev and he not sure the problem too). Test yourself and see how.
So if you use freeky engine, you should move xbin to system instead of system/etc, otherwise zipalign may not work
Click to expand...
Click to collapse
Hmmm..or maybe theres a different between the freeky and geeky,so far for about 5hours ive been using this geeky engine+forfivo v1 and nothing bad happen
Or maybe ill make it 24 hours to see how it goes #insomnia time (testing and testing)
Sent from my EHNDROIX-i8150 using xda premium
I having a black screen when i select some games. The game seens to load, sound efects and etc, but no grafics, only a black screen. It is no happens in every game, just some. I´m using Slimbeam with stock kernel, and Seeder V7. There a configuration or some trick to solve this?
try using CHAINFIRE3d.....
If the game stays that way and TK asks for FC of the game, the game most likely don't fit your device. Try going pristine, and use kernel with bigmem.
I faced the same situation too... Jelly Bean sometimes cant run games like beach buggy blitz and Riptide gp... I use CM10 and SlimBean... Than i switch to ICS because its still not working...
Sent using my Smoothie ICS ROM
nisiomorais said:
I having a black screen when i select some games. The game seens to load, sound efects and etc, but no grafics, only a black screen. It is no happens in every game, just some. I´m using Slimbeam with stock kernel, and Seeder V7. There a configuration or some trick to solve this?
Click to expand...
Click to collapse
TiTAN-O-One said:
I faced the same situation too... Jelly Bean sometimes cant run games like beach buggy blitz and Riptide gp... I use CM10 and SlimBean... Than i switch to ICS because its still not working...
Sent using my Smoothie ICS ROM
Click to expand...
Click to collapse
My suggestion is going pristine and if it is still there then try a GB rom and check if it is still there
santiagoruel13 said:
try using CHAINFIRE3d.....
Click to expand...
Click to collapse
The Dev said it won't work on ICS/JB some one said it worked on MIUI ICS but no one said it will work on JB, so no one should risk
Quite wrong, ICS will work... Its only jelly bean ROMS...
Sent using my Smoothie ICS ROM
Ok, chainfire won´t work, i actually instaled this Rom at Pristine way, the game shows no FC... I´m using the SlimBeam´s defaut kernel, Ondemand governor. Shoud I try another Kernel, so what Kernel do you suggest?
Thank you guys!
nisiomorais said:
Ok, chainfire won´t work, i actually instaled this Rom at Pristine way, the game shows no FC... I´m using the SlimBeam´s defaut kernel, Ondemand governor. Shoud I try another Kernel, so what Kernel do you suggest?
Thank you guys!
Click to expand...
Click to collapse
Backup using CWM and go GB for sometime, try the same games and give me a feedback
I personally love hadi's kernel, try it and tell me whaf do you think.
Sent from my GT-I8150 using xda app-developers app
7amada100 said:
Backup using CWM and go GB for sometime, try the same games and give me a feedback
I personally love hadi's kernel, try it and tell me whaf do you think.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Is this? http://forum.xda-developers.com/showthread.php?t=2076332
nisiomorais said:
Is this? http://forum.xda-developers.com/showthread.php?t=2076332
Click to expand...
Click to collapse
yes, and try hadi's config
7amada100 said:
yes, and try hadi's config
Click to expand...
Click to collapse
Doesn´t work, my fone got softbrick... weird... Tomorow i will check with Hadi on his tread about a solution for this instalation
Restoring now, thanks anyway!
You're using SlimBean... Hadiconfig is ICS... One of his version is for JB... Did you download tht?
Sent using my Smoothie ICS ROM
Yes, of course
Shoud i have to wipe data or do something before?
Sent from my GT-I8150 using xda app-developers app
nisiomorais said:
Yes, of course
Shoud i have to wipe data or do something before?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
no no, kernel flashing only need wipe cache/dalvik cache
TiTAN-O-One said:
You're using SlimBean... Hadiconfig is ICS... One of his version is for JB... Did you download tht?
Sent using my Smoothie ICS ROM
Click to expand...
Click to collapse
Hadi made a whole new thread for the JB Version
Sent from my GT-I8150 using xda app-developers app
Oh... CM10 thingy... Now i remembered.. My bad
Sent using my Smoothie ICS ROM
Ever had problems running Vector on your Galaxy Ace? Well dont worry because in this tutorial, I will show how to run Vector on your Galaxy ace.
Requirements:
Vector(U can download it from play store)
Chainfire3d(with all plugins installed)
Steps:
1. Go to Chainfire3d
2. Go to Default OpenGL settings
3. Tick Reduce texture quality
4. Tick Reduce texture size
5. Click Use a plugin then select Qualcomm
6. Exit CF3D and open Vector. U will get an error. Ignore that and press OK.
7. Enjoy your game! The game is a bit laggy but still playable.
Hit thanks if I helped you!
Note: You cannot view the intro video in the game.
WARNING! Do not use CF3D on ICS/JB or else your device will be BRICKED!
Tested this on stock roms and its working. If there are problems please reply.
æzñπácr_X
Dont use chainfire 3d on ics and jb because your phone will be brick
Sent from my GT-S5830 using xda app-developers app
kereta caretta said:
Dont use chainfire 3d on ics and jb because your phone will be brick
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the heads up. OP add this point or people may end up bricking. CF3D is not for ICS/JB.
EditOP, i however forgot to mention that it works partially on ics. However i dont know to how much extent it works. But still it is recommended not to use it on ics.
We could have had it all, Rolling in the Deep!
kereta caretta said:
Dont use chainfire 3d on ics and jb because your phone will be brick
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Ok. Its now added to the OP.
Sent from my GT-S5830
kereta caretta said:
Dont use chainfire 3d on ics and jb because your phone will be brick
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
then s5830i users have nothing to worry about
Sent from my GT-S5830i using xda app-developers app