Hello,
Last week I updated my S3 to Android 4.1 (Jelly Bean) via Kies. The connection between the computer and the phone was fine. After it updated, I connected the phone again to backup my phone with Kies but on my phone I received the error "Unfortunately, MTP Application has stopped". I kept messing around with settings such as turning on and off USB debugging but that made no difference. I switched between PTP and MTP and some how it ended up working but that was short lived as it stopped working once again. I did some research and people have said to uninstall the drivers and let windows install the drivers or remove Kies and reinstall it but it still will not work. I have also tried different cables and USB ports and that didn't work. What can I do to fix this problem?
Phone: Samsung Galaxy S3 (i747m)
Carrier: Rogers Wireless
Rom: Stock Android 4.1 Jelly Bean No Root
Operating System: Windows 7 Ultimate SP1 64-bit
Bump?
Monkeymo13 said:
Bump?
Click to expand...
Click to collapse
I have this issue too and it's pissing me off.
I'm using a 32gb SD card and I can't transfer anything to it without taking it out of my phone.
I can't even transfer files from my internal SD to the sd card... using samsung's "my files" app, it just says transfer failed
I know there's nothing wrong with the SD card because it works just fine when I put it in the sd card adapter. I can also read files off of it just fine.
running stock rooted jb.
For me Unfortunately, MTP application has stopped problem is solved !!!
Read my post #6, problem is solved !!! very minor point but we tend to overlook it...
http://forum.xda-developers.com/showthread.php?t=2547187
Do vote me Thanks if your problem is solved...:good:
Related
Hi, i am new to XDA.
Recently got my SGS and everything is excellent, could not be happier, however i am at a loss on how to get my phone connected to Samsung Kies.
I can access the device using USB mass storage mode and debugging mode, but when it is set to Kies mode my SGS keeps showing that "preparing for Samsung Kies" or what ever it is screen and keeps flashing it on and off and will continuously do this until i remove the USB cable.
Anyone else have this issue and anyone know how to fix it?
Cheers!
http://forum.xda-developers.com/showthread.php?t=751275
Install teh latest Kies form Samsung Firmware Website.
Try this first.
Then if no joy.
Remove the sd card and try again.
If no joy then format the internal SD Memory usually solves the problem but remember to backup your applicatons to external SD card.
i have a videotron Galaxy S3 T-999V rooted and running FreeGS3 SuperSonic R5 rom (awesome rom)
just recently, when ever i connected my phone to the computer (running windows 7) and tried to copy files onto the external memory card, my computer could not copy it and gave me a message saying "sd card might be damaged etc...."
but then i tried to copy something onto my internal memory card and my computer again couldn't copy it, saying "the file could not be copied because the device may have stopped working or is corrupt etc"
i even tried Android file Transfer on my mac and it wouldn't recognize the phone when connected
i never had this problem before and it just recently came up unexpectedly, i've been running Ultimatum Rom 1.3 (ATT SGS3 rom, but has been working perfectly) on my T999 SGS3
is it a software or hardware problem? my phone works perfectly fine.i can copy and move files within in the phone, and when i put my microSD card into a SD card adapter my mac seems to recognize is and can copy files onto it right away
What i've done:
Turn on/off USB debugging mode
Turn on/off "Allow Mock Locations"
Installed android SDK on my pc
Installed all Samsung Drivers on my PC
installed Samsung Kies (still would not detect my phone)
Tried different roms (CM10, kyan Rom, Ultimatum 1.3)
Restored from Previous back-ups using CWM
Performing a full wipe and installing the rom again.
PLEASE HELP !!
any help would be greatly appreciated !!
FIX
rezihk said:
i have a videotron Galaxy S3 T-999V rooted and running FreeGS3 SuperSonic R5 rom (awesome rom)
just recently, when ever i connected my phone to the computer (running windows 7) and tried to copy files onto the external memory card, my computer could not copy it and gave me a message saying "sd card might be damaged etc...."
but then i tried to copy something onto my internal memory card and my computer again couldn't copy it, saying "the file could not be copied because the device may have stopped working or is corrupt etc"
i even tried Android file Transfer on my mac and it wouldn't recognize the phone when connected
i never had this problem before and it just recently came up unexpectedly, i've been running Ultimatum Rom 1.3 (ATT SGS3 rom, but has been working perfectly) on my T999 SGS3
is it a software or hardware problem? my phone works perfectly fine.i can copy and move files within in the phone, and when i put my microSD card into a SD card adapter my mac seems to recognize is and can copy files onto it right away
What i've done:
Turn on/off USB debugging mode
Turn on/off "Allow Mock Locations"
Installed android SDK on my pc
Installed all Samsung Drivers on my PC
installed Samsung Kies (still would not detect my phone)
Tried different roms (CM10, kyan Rom, Ultimatum 1.3)
Restored from Previous back-ups using CWM
Performing a full wipe and installing the rom again.
PLEASE HELP !!
any help would be greatly appreciated !!
Click to expand...
Click to collapse
HEY I WENT THROUGH THE SAME ISSUES , just dial *#7284# then chose MTP+ADB that's it.
if it work please hit thank you :good:
I reimaged my PC, loaded the latest Samsung drivers, and now cannot see the external SD card on my PC. I am running Windows 7. Althougth I am running a custom ROM, I am the only one that cannot see the external SD card so I think it is my connection/drivers. I originally just installed the latest Samsung drivers, as part of troubleshooting I went ahead and installed the full Kies Air software. I can see the exteranal card fine in my phone and can transfer files fine within my phone. Any thoughts on what I need to set or do differently? I have reloaded the driver a couple of times. I have tried it with USB debugging on and off. ROM is a touchwiz based ROM, Project X V 2.6. (Any help appreciated.)
Edit: Just found out I had to switch from mass storage to MTB and then I can see the external drive.
sd
How do you do that?
ctslaton said:
I reimaged my PC, loaded the latest Samsung drivers, and now cannot see the external SD card on my PC. I am running Windows 7. Althougth I am running a custom ROM, I am the only one that cannot see the external SD card so I think it is my connection/drivers. I originally just installed the latest Samsung drivers, as part of troubleshooting I went ahead and installed the full Kies Air software. I can see the exteranal card fine in my phone and can transfer files fine within my phone. Any thoughts on what I need to set or do differently? I have reloaded the driver a couple of times. I have tried it with USB debugging on and off. ROM is a touchwiz based ROM, Project X V 2.6. (Any help appreciated.)
Edit: Just found out I had to switch from mass storage to MTB and then I can see the external drive.
Click to expand...
Click to collapse
i have tried searching threads for this problem but i only got confused....i hope some good people can help me with my note 2 international version problem....the pc does not detect my device...it has been a recent problem....it used to be detected by the pc but now it cant be detected...i also have tried different pc and cables and same results...it cant be detected as a usb storage device...funny thing about it is it charges and works well with otg cable...i tried connecting a mouse and a keyboard and it works...also can read usb flash disks....the only problem is i cant acess its internal contents because it not shown on pc.... i suspect it has something to do with a software....anybody please help me out in here....iam also currently project aosp rom,,,,i used xnote rom but usb connection is not detected as well...i also tried reverting back to stock rom but still no luck being detected,,,iam planning to format the internal sd card and installing stock rom to see if it fixes the problem...if anyone out there willing to help please do so...much appreciated...thanks in advance.....
white_wolf29 said:
i have tried searching threads for this problem but i only got confused....i hope some good people can help me with my note 2 international version problem....the pc does not detect my device...it has been a recent problem....it used to be detected by the pc but now it cant be detected...i also have tried different pc and cables and same results...it cant be detected as a usb storage device...funny thing about it is it charges and works well with otg cable...i tried connecting a mouse and a keyboard and it works...also can read usb flash disks....the only problem is i cant acess its internal contents because it not shown on pc.... i suspect it has something to do with a software....anybody please help me out in here....iam also currently project aosp rom,,,,i used xnote rom but usb connection is not detected as well...i also tried reverting back to stock rom but still no luck being detected,,,iam planning to format the internal sd card and installing stock rom to see if it fixes the problem...if anyone out there willing to help please do so...much appreciated...thanks in advance.....
Click to expand...
Click to collapse
first uninstall kies and samsung driver ,reboot.
reinstall samsung driver it will try to update just cancel the update and it will install fine. do not install kies now plug in your usb to the pc and then to the phone.
if it detects good if not then the usb flex of the phone is the culprit take it to ss for a repair and be ready to make it all stock and status normal and yes despite the bad flex it does charge the phone gone through the same prob before
I used to have a galaxy s 2 it would not be detected on the pc..because while it was charging at one time it fell down the whole weight of the phone landed on the stub/pin of the charger...it continued to charged though... took it to Samsung repair store they just changed a small circuit board which had the charger and Mic...very simple and fast hardly 5 min...if all fails for you..try this option
Sent from my GT-N7105 using Tapatalk 4
white_wolf29 said:
i have tried searching threads for this problem but i only got confused....i hope some good people can help me with my note 2 international version problem....the pc does not detect my device...it has been a recent problem....it used to be detected by the pc but now it cant be detected...i also have tried different pc and cables and same results...it cant be detected as a usb storage device...funny thing about it is it charges and works well with otg cable...i tried connecting a mouse and a keyboard and it works...also can read usb flash disks....the only problem is i cant acess its internal contents because it not shown on pc.... i suspect it has something to do with a software....anybody please help me out in here....iam also currently project aosp rom,,,,i used xnote rom but usb connection is not detected as well...i also tried reverting back to stock rom but still no luck being detected,,,iam planning to format the internal sd card and installing stock rom to see if it fixes the problem...if anyone out there willing to help please do so...much appreciated...thanks in advance.....
Click to expand...
Click to collapse
Reboot your PC.
I've got a trouble with my HOX when I upgrade my computer to Win 10.
I use ROM: XenonHD 5 Kernel 3.1.10 -cyanogenmod.
I have tried to mount SD card on computer with HTC sync and a bunch of MTP drivers but it haven't worked at all.
I have already uninstalled device and reconnected but it didn't work.
I have already actived USB debugging and didn't work.
Now, it is totally crazy that I can't mount my SD card to transfer data. I really need the help, does anyone have the driver for MTP or someone got that issue? Help me please, thanks all.