I want to return my phone back to stock and I have downloaded the following RUU however when I run it, it says that i have the incorrect version.
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27_Radio_5.1204.162.29_release_298897_signed.exe
My Cid is HTC__001 and im on hboot 1.36 and bootloader has been relocked. Could someone please advise what to do? Thanks.
Type this in fastboot:
Code:
fastboot getvar version-main
Post result here.
It's ok now. Run RUU as Administrator and it went straight though. Thanks
Thread Closed​
Solved​
Related
If I really really want to do a super duper factory reset. What should I do? I'm on ARHD 18.2 and hboot 1.39. 3.14.401.31 5.1204.162.29
Back to basic as far as i can...
I have issues with my wifi, I have to restart the wifi after awhile. My screen behave strange and in non responsive from time to time. The battery drains in like 8 hours, earlier it was ok for like 36 hours, that was i think when I used hboot 1.31. All this errors appeared when I went for hboot 1.39 I think.
I understand that downgrading hboot is not possible. But everything else?!?
Thanks for assisting.
Run a RUU for a super duper factory reset ruu.androidfiles.org
I guess you need to do the fastboot command
Fastboot getvar version-main
I think that the main version posted by henrik is from the custom rom that is based on 3.14.401.....
RUU failed.
Shoud I do anything pre RUU?
Fastboot something? Relock?
Yes the bootloader needs to be relocked. And you have to run the ruu with administrator rights. And keep the phone in the bootloader/fastboot usb mode
Are you sure you got the right ruu. Did you do
Fastboot getvar version-main
And did it came up with the same number you posted in the first post ?
Mr Hofs said:
Yes the bootloader needs to be relocked. And you have to run the ruu with administrator rights. And keep the phone in the bootloader/fastboot usb mode
Are you sure you got the right ruu. Did you do
Fastboot getvar version-main
And did it came up with the same number you posted in the first post ?
Click to expand...
Click to collapse
Yes same number.
When i lock it it will only boot to bootloader. To run RUU I need to get in to the phone.
Should I do anyting else in fastboot?
Regards
/Henrik
You can run the ruu in fastboot mode too.
Yeah like i said in my previous post
Thanks allot, now i'm back to scratch. The issues with the touchpanel is still there, the top part is not consistent sometime it works and sometime it doesn't. We will see if the batterylife is better.
Thanks again.
/Henrik
No problem mate, i hope it Works out fine for you in the end :thumbup:
CASE CLOSED !
Hlo, how manually update htc one x cid no. vodap021 to latest jelly bean version, it is possible to update vodap021 to jelly bean??
You have to see if there is an OTA update, or the firmware for upgrade to Jelly
Ah, the update is from vodafone and not from htc...
Yes you can ..... I need your main version number
Fastboot getvar version-main
Post the outcome please
Current android version 4.0.4
Android sense verson 4.1
Hboot version 0.95.0000
Vodafone doesn't update my phones android version.....if i check it from settings, about, check for update...shows there is no update available for ur device
Mr Hofs said:
Yes you can ..... I need your main version number
Fastboot getvar version-main
Post the outcome please
Click to expand...
Click to collapse
^^
Edit :
I checked it all myself, faster
I am assuming your bootloader is LOCKED ? if not put the phone in the bootloader and RELOCK the bootloader with this fastboot command
Fastboot oem lock
Then keep the phone in the bootloader and execute this file with admin rights, right click the ruu.exe and select
Run as administrator
http://bugsylawson.com/index.php/fi...22-radio-2120413520-release-275359-signedexe/
Then OTA to JB with the official way from the phones menu
I try this method but it shows the bettery is less than 30% even i charged battery 100% but it continuously show this error
Hi guys.Im new to HTC one X.I just bought an HTC one X from e-bay and it came pre rooted thought the phone looks brandnew.I tried to insert a sim and my phone keeps on showing an error saying process.com.android.phone is stopped and it does not show any signal bars.After several reboots sometimes signal bars do appear sometimes.But i am unable to make or recieve calls as my phone app keeps on force closing. My phone has stock ICS.
So if i flash a stock RUU will the problem be solved or is there anything that i can do to make my phone work?thank you.
I would recommend flashing a stock RUU.
You would need to check your CID and whether your bootloader is locked or unlocked. To do this, you can hold power+volume up down buttons to reboot phone to bootloader and see the first line.
The RUU you flash must match your CID.
Recommended for you:
RUUs: http://forum.xda-developers.com/wiki/HTC_One_X#Total_recovery_-_flashing_a_RUU_to_completely_restore_your_phone
About CID and other info: http://forum.xda-developers.com/showthread.php?t=2031359
Power button + volume down button (not up)
And post the outcome of this fastboot command
Fastboot getvar version-main
Tony Tan said:
I would recommend flashing a stock RUU.
You would need to check your CID and whether your bootloader is locked or unlocked. To do this, you can hold power+volume up down buttons to reboot phone to bootloader and see the first line.
The RUU you flash must match your CID.
Recommended for you:
RUUs: http://forum.xda-developers.com/wiki/HTC_One_X#Total_recovery_-_flashing_a_RUU_to_completely_restore_your_phone
About CID and other info: http://forum.xda-developers.com/showthread.php?t=2031359
Click to expand...
Click to collapse
Thanks for the help(i hit the thanks button too
one more question.Mine has got super CID.
So what RUU should i flash?
You mean Super CID 11111111?
Did you check with:
fastboot getvar cid
fastboot oem readcid
If my understanding is correct, you should be able to flash any RUU with any CID in that case.
Just make sure the RUU you are flashing is for your device model (HTC One X Endeavor, not HTC One XL or anything else)
I have never owned a supercid device though, so you might want to confirm with someone else.
For RUU downloads:
http://forum.xda-developers.com/showthread.php?t=2094113
http://forum.xda-developers.com/showthread.php?t=2189048
Credits to Mr Hofs for helping me find the links.
nuwanmw1988 said:
Thanks for the help(i hit the thanks button too
one more question.Mine has got super CID.
So what RUU should i flash?
Click to expand...
Click to collapse
Tony Tan said:
You mean Super CID 111111111?
Did you check with:
fastboot getvar cid
fastboot oem readcid
If my understanding is correct, you should be able to flash any RUU with any CID in that case.
Just make sure the RUU you are flashing is for your device model (HTC One X Endeavor, not HTC One XL or anything else)
I have never owned a supercid device though, so you might want to confirm with someone else.
For RUU downloads:
http://forum.xda-developers.com/showthread.php?t=2094113
http://forum.xda-developers.com/showthread.php?t=2189048
Credits to Mr Hofs for helping me find the links.
Click to expand...
Click to collapse
yup..its 11111111
Then you can flash any ruu basically !
Thanx guys..my phone is back to life now.
Sent from my HTC One X using xda premium
Hi. I wanted to go back to stock. So according to some link I referred to:
I typed in cmd
fastboot getvar version-main to know my version. It showed 1.29.401.11
My hboot is 1.39.
I downloaded the RUU: ruu_endeavor_u_jb_45_s_htc_europe_3.14.401.27_radio_5.1204.162.29_release_298897_signed
However, when I ran the RUU, it says the update could not be done "Error: 155"
I don't know what went wrong. Urgent help needed guys. My phone is still stuck on the black screen with htc logo in the middle. And if I run out of battery, it's going to be a big problem.
Please check this fastboot command:
fastboot getvar cid
And let me know what you will get back.
Issue Resolved
Hello all,
The issue has been resolved now. I was trying to run the 3.14.401.27 RUU, but it wasn't working. When I ran the 3.14.401.31 RUU, it worked.
It was pointed out to me by Mr. Hofs that the .27 RUU is for 1.36 HBOOT and the .31 RUU is for 1.39 HBOOT.
Thank you so much, Mr. Hofs, for pointing this out to me.:good:
i have tried to get back to stock by flashing an ruu file i downloaded RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
since my HOX is WWE. i tried to run the exe after re locking bootloader of course,but it gives an error (ERROR 140 BOOTLOADER VERSION ERROR) i tried it more than once so i figured the problem or i think i have my phone is running on 3.20.401.1 and the ruu is 3.14.401.31 i looked every where for 3.20.401.1 ruu but no luck have any one got a link for it?.or some one can help me solve this problem?
Ruu will never see the daylight with that number. If you want stock.....get one in the general section - nandroid backup collection ! More than enough to choose from
The nand has to match :
Fastboot getvar version-main
EDIT :
And if your CID is not present, take the 3.20.401 from another CID and and restore it, then flash back the stock recovery. Do not relock the bootloader (not needed) and update via about - software updates in the settings menu
if i flash a nandroid from another CID will it cause any problems?
downloading your 3.20.401.1 CID HTC__E11
No software issues won't be there. It's just that it's from another cid, it needs one official ota to pull the cid straight. After that you can also relock the bootloader if you wish