Hello i need rom from orange network for alcatel ot-908f or backup orange rom,i thanks sorry my bad english
Hy!!
Same problem...need ot-908 orange romania brand rom...
Hello!!!! this is Poland backup rom orange....."http://forum.cyanogenmod.pl/index.php/topic/655-alcatel-ot-908f-stock-rom-pl-android-222-orange-backup/"
gsmdreams100 said:
Hello i need rom from orange network for alcatel ot-908f or backup orange rom,i thanks sorry my bad english
Click to expand...
Click to collapse
hi all!!!!
my friends ive flashed my ot 908f with custom rom but it didnt work fone open as nomal showing android logo then alcatel logo and hangs there i know how back to the orignal rom but two things missing the rom and the main problem is that my pc does't reconise my phone i ve installed the drivers but nothing hppens i have android sdk and i've used adb tricks that i found on the net but my pc say's "UNKNOWN DEVISE IS PLUGED " :crying:
took it to arepair center same problem pc does not reconises my phone but mother bord is fine workiing fine
please help me what todo all my hopes hangs on yopur replays
Related
Hi, I am new to the world of MDA and have recently tried to upgrade using JASJAR_WWE_11353_137_10301 rom but now my phone is stuck (i think it is the bootloader" it says serial on top and changes to usb when i connect it to my cradle. After reading a couple of posts i was able to upload it with the same rom but instead of using ROMUgradeUT i used MaUpgradeUt_noID.exe but after it was still on the bootloader screen even though it had upgraded. If anyone can help me i will appreciate it.
Try other ROM
Hy !
If You see the loader, You may try to load an other ROM.
For me, it worked smotthly after using an other computer (a laptop). The USB link may be a source of problems too . ..
I used UniversalRUU with a thingonaspring build: worked fine. Good luck !
V.
hello all.
i just brought a second touch diamond unlocked but i'm having a few problems.
1. does not connect in windows 7 but however does connect to usb mode in bootloader.
now i tried flashing hard-spl onto the device, it goes to as far as the white progress bar, and does nothing.progress bar remains on 0%.
2. i did a hard rest and when the phone finally loaded it was in arabic, makes me wonder if the phone is imported. the s/n does work on the official website.
3. what i would like is help on connecting it to my computer and be able to slash a custom rom it.
please can sombebody please help me out of this pickle pls.
Try downgrading the radio to one below 1.02.xxxxx before flashing the HARDSpl
Also download Windows Mobile Device Centre from MS to get active sync running on the PC
ive done it
thanks all ive it,you guys are great.
thanks for all the advise.
Hello . Today i wanted to upgrade my Nexus With Paranoid 4beta4 .
my situatios it's this :
I downloaded the costum rom on my other leptop and i downloaded gapps too
I tried to sideload them and somehow managed to do it .. i say somehow becouse i had lot's of problem at drivers instalation
after i transfered the files i erased everithing on my Gnex so i can get a new clean OS (not smart i know)
and after i realized i tried to sideload the Os at least. didn't work at all .. My fastboot .. (the max where i ca get my Gnex in question right now ) gives this error "device not recognized " i tried to instal my other Gnex on the same laptop .. it worked .. i tough now i could do a sideload but .. when plugged in the other gnex (the one without os) same message . "device not recognized"
It's not the 1st time i deleted my os .. but 1st time that i could not sideload.. or get "device not recognized"
It's there any solution ? or i should get my other leptop back ?
Tancks for help and sorry for my english (i'm from romania)
dannyo4 said:
Hello . Today i wanted to upgrade my Nexus With Paranoid 4beta4 .
my situatios it's this :
I downloaded the costum rom on my other leptop and i downloaded gapps too
I tried to sideload them and somehow managed to do it .. i say somehow becouse i had lot's of problem at drivers instalation
after i transfered the files i erased everithing on my Gnex so i can get a new clean OS (not smart i know)
and after i realized i tried to sideload the Os at least. didn't work at all .. My fastboot .. (the max where i ca get my Gnex in question right now ) gives this error "device not recognized " i tried to instal my other Gnex on the same laptop .. it worked .. i tough now i could do a sideload but .. when plugged in the other gnex (the one without os) same message . "device not recognized"
It's not the 1st time i deleted my os .. but 1st time that i could not sideload.. or get "device not recognized"
It's there any solution ? or i should get my other leptop back ?
Tancks for help and sorry for my english (i'm from romania)
Click to expand...
Click to collapse
Have you tried to re-install a stock firmware? It may work.
tnx
elia222 said:
Have you tried to re-install a stock firmware? It may work.
Click to expand...
Click to collapse
I did that after painfull work .. And now i know that my usb part it's the fault here . tnx for help and where i can buy usb part that can be changed ??
Sorry for my english .
dannyo4 said:
I did that after painfull work .. And now i know that my usb part it's the fault here . tnx for help and where i can buy usb part that can be changed ??
Sorry for my english .
Click to expand...
Click to collapse
Try to search if you find something on ebay, or ask to samsung's assistence, but I don't know if it can be easily changed.
Hello all
I own a Xperia Arc LT15i
tried to update it, but when the middle it was extinguished the device and when I tried to turn it on again it was not respond only shows a green light repeatedly, but the screen remains black and when I'm trying to connected it to computer ,it only connect by flash boot. i tried to connected it by fast boot or PC Companion but no thing happened
Can you help me please
Adiga-Ahmad said:
Hello all
I own a Xperia Arc LT15i
tried to update it, but when the middle it was extinguished the device and when I tried to turn it on again it was not respond only shows a green light repeatedly, but the screen remains black and when I'm trying to connected it to computer ,it only connect by flash boot. i tried to connected it by fast boot or PC Companion but no thing happened
Can you help me please
Click to expand...
Click to collapse
With what did you try to upgrade and how? It seems your update has gone wrong, as you state, it got terminated in the middle? Probably if you connect through fastboot, or flashtool for windows, you can put in a new kernel and the rom. It seems your phones kernel is broken too. It should be fine once you install a new kernel and rom.
For how to do that please look at one of the tutorials here: http://forum.xda-developers.com/showthread.php?t=2320872
Hope it'll work out for you.
mhadjih said:
With what did you try to upgrade and how? It seems your update has gone wrong, as you state, it got terminated in the middle? Probably if you connect through fastboot, or flashtool for windows, you can put in a new kernel and the rom. It seems your phones kernel is broken too. It should be fine once you install a new kernel and rom.
For how to do that please look at one of the tutorials here: http://forum.xda-developers.com/showthread.php?t=2320872
Hope it'll work out for you.
Click to expand...
Click to collapse
Thanks for the reply
But so do I upload new kernel or to break the bootloader from these pages you gave it to me, so i have to work through a Fastboot, and this is the problem my device is not connected to the computers through the Fastboot, the mobile always on Flashboot, I tried to load the kernel via the Flash tools but useless, even the Pc Combanion i tried to flash a new software but no thing happened
sorry for my english friend ,,
Adiga-Ahmad said:
Thanks for the reply
But so do I upload new kernel or to break the bootloader from these pages you gave it to me, so i have to work through a Fastboot, and this is the problem my device is not connected to the computers through the Fastboot, the mobile always on Flashboot, I tried to load the kernel via the Flash tools but useless, even the Pc Combanion i tried to flash a new software but no thing happened
sorry for my english friend ,,
Click to expand...
Click to collapse
i can fix it ..contact me on gtalk [email protected]
my micromax android one sprout 4 device got fully bricked :crying: (dnt know the reason). i tried to flash stock rom through sp tool, the rom got installled sucessfully but also my phone doesn't turn on . also have problem in usb that, when im connecting usb, it keeps on connecting and disconnection . please help me:cyclops:. whatsapp-9751026364
Change the USB cable or check the SP tools drivers is it installed properly or not ?
nnaveenrajj said:
my micromax android one sprout 4 device got fully bricked :crying: (dnt know the reason). i tried to flash stock rom through sp tool, the rom got installled sucessfully but also my phone doesn't turn on . also have problem in usb that, when im connecting usb, it keeps on connecting and disconnection . please help me:cyclops:. whatsapp-9751026364
Click to expand...
Click to collapse
Stay connected with ur PC and try to flash ROM, do not disconnect ur phone until ur ROM get flashed...
Then u r good to go..??