Related
I'm pleased to present my repack of the stock ROM for the HTC Vision! READ THIS WHOLE POST BEFORE YOU START! No, really, it contains everything you need to know.
Remember that if you use this ROM, you do so entirely at your own risk!!
About MoDaCo stock ROM repacks
Unlike a MCR (MoDaCo Custom ROM) release, a stock ROM repack is as close to the stock ROM as possible. Only root / Superuser and an insecure boot image is added. The benefits of the repack are providing a rollback option in update zip format as well as providing an online kitchen to remove parts that are not required.
A MCR release of this ROM is also available!
Requirements
In order to use this ROM on your device, you must have a custom recovery image installed (Clockwork Mod).
THIS ROM SHOULD RUN ON BOTH THE G2 AND THE DESIRE Z!
Features
Repack of the 1.22.531.8 (OTA) ROM
Pre-rooted with su and Superuser Permissions by ChainsDD
Insecure boot image (ro.secure=0)
Changelog
Please see the post below this one for the changes in each release.
Installation
To install this ROM:
Download the zip file of your choice from the links below (or the online kitchen) and copy to your SD card
Restart your device in recovery mode
PERFORM A NANDROID BACKUP FROM THE MENU
Select the option to apply an update zip, and select the zip file you copied to your memory card
Upgrading
No wipe is explicitly required in order to use this ROM (unless you are coming from a 'Sense' ROM), however if you do encounter issues of any kind, it is recommended that you wipe your device and reproduce the issue before raising it here.
Downloads
This ROM is now available in the online kitchen - see the post below for details! In addition to the kitchen, a prebaked download is available.
DOWNLOAD
Thanks
It's impossible to mention everyone who contributes to the Android community by name, but to everyone out there who does great work and shares it with us all - you have my gratitude and respect.
And finally...
Details on how to donate should you wish to do so are in download topic at MoDaCo.
Enjoy!
P
Changelog
11/Nov r1
Initial Release
Let me know how you get on people!
MCR'd version and Sense stock / MCR for both G2/Z to follow (soon)!
P
just flashed this. pretty fast,
thanks paul!
COOKIN' ROMS LIKE A BOSS
Thanks, Paul. Looking forward to your SenseUI build for American Visions
Works perfectly. Very snappy. Using it with the ROM kitchen is a nice way to customize exactly the ROM you want. I used that to keep my old email.apk that doesn't ask for a alphanumeric password every time I want to use the phone.
Like butter
Is busybox preinstalled also? I'm sure it is...but just making sure
Actually, I don't see it in xbin, weird....
thank u so much for this... using sense with this phone was like installing kde on freebsd.... much rather have fluxbox...
if i flash this over bacon bits will this return me to the pre-bacon bits - post ota stock kernel without oc?
sino8r; said:
Is busybox preinstalled also? I'm sure it is...but just making sure
Actually, I don't see it in xbin, weird....
Click to expand...
Click to collapse
I installed it from the market after Titanium wouldn't run. Problem solved
JonInAtl said:
I installed it from the market after Titanium wouldn't run. Problem solved
Click to expand...
Click to collapse
Okay, good! I was having trouble installing last night so I just put in xbin manually. Thats no problem then... thanks!
sino8r said:
Is busybox preinstalled also? I'm sure it is...but just making sure
Actually, I don't see it in xbin, weird....
Click to expand...
Click to collapse
No, but i'm going to add it.
P
sundar2012 said:
if i flash this over bacon bits will this return me to the pre-bacon bits - post ota stock kernel without oc?
Click to expand...
Click to collapse
Correct.
P
Pual, I for the life of me can't seem to get this overclocked. I should be able to overclock this using the steps in the link below correct? Oh, and by the way I love the rom. I used baconbit, which was great until i found out I couldn't use my extended battery on it.
http://forum.xda-developers.com/showthread.php?t=813681
I've done a total wipe and installed your rom and my app with titanium. Here's the link.
I've put the ota ko file in the root of the my sd. And ran the attached .sh files in gscript, but all i get is errors.
Edit: nevermind I see that the OP to the overclocking post no longer supports it. I guess ill have to go with the new kernal and hope it works with extended batteries. Thanks for reading.
blaaaaa
i used this rom there was bs
pbedard said:
i used this rom there was bs
Click to expand...
Click to collapse
Who in the what now?
P
paulobrien said:
Who in the what now?
P
Click to expand...
Click to collapse
that was comedy
thatruth132 said:
that was comedy
Click to expand...
Click to collapse
Lmfao!!
Sent from my T-Mobile G2 using XDA App
Android Development How-To: Compiling the Android/Linux kernel for the Epic Touch 4G.
NOW INCLUDES ROOT!!!
Introduction: This guide is meant for people who want to get started with android development and don't know where to start. This thread can also be used as a reference place for android development on the et4g. This guide well first be on compiling the android kernel and flashing it to your phone and, I well update it on a regular basis for more complex mods and such to get you familiar with the android platform. If at anytime anyone would like to add more to this, pm me with what you would like to add or fix. Android is an open-source wonderland and I feel like more people should experience the fun of android development. Just remember I am not responsible if you do something stupid and break your phone!
First, we are going to get familiar with the android kernel by compiling a stock build and flashing it with Odin to your et4g.
What you need to download to compile the kernel:
Samsung open-source kernel and platform files. Available at: Samsung Open Source
Type in: Sph-d710 in the search bar in the link and download latest source.
initramfs files (More on this later) (includes cwm, busy box, and of course root! Thanks to chris41g for his help.) Files available at: Initramfs Files
Tool chain for compiling: Available at: Arm-toolchain
Preferably Ubuntu or another Distro. Of Linux running on a partition or Virtual machine.
Step 1: Were going to unzip the source you got from Samsung and take a short look around.
unzip the source and unzip the file that says, “SPH-D710_GB_Kernel.tar.gz” and, open it up. You are now looking at the kernel source for the Epic touch 4g! Okay I well not go over to much whats is here but, I well add a more in depth look in the kernel soon.
Scroll to the bottom of the source and you should see a document that says, "makefile". We are just going to add a name for your stock compile of the kernel, to make it a little more special. Open it and go to where it says Extra version and add your last name ,just make it all lower case letters or it wont compile correctly. When you flash it to your phone, the about phone panel in setting well say: Kernel version: 2.6 [last name you chose] now.
Step 2: Lets get started!
Open terminal in Linux and change your directory to the kernel. You do this by putting,
“cd” and then typing where your kernel source is then hit enter. My terminal looked like this:
cd /home/shane/Desktop/SPH-D710_GB_Kernel
Click to expand...
Click to collapse
Step 3: Tell terminal where your tool chains you downloaded are located.
The kernel is compiled using a tool chain, and the terminal needs to know where the tool chain is to compile. (The tool chain is the folder called “arm-2009q3” )Start by typing this in the terminal:
export CROSS_COMPILE=
Click to expand...
Click to collapse
Then after that put where your tool chain is located. Also when you are entering where it is at, you need to put a “/bin/arm-none-eabi-” at the end of the directory. This shows the terminal that the compiling tools are under the folder bin and starts with arm-none-eabi- and the android compilation adds the last word for the compiler program it needs. (you can see this if you go into the bin folder under the “arm-2009q3 folder.) For adding the tool chain I entered this:
export CROSS_COMPILE=/home/shane/Desktop/arm-2009q3/bin/arm-none-eabi-
Click to expand...
Click to collapse
Then hit enter.
Step 4: Clean the kernel, enter configuration files and make the modules.
Enter this command:
sudo make clean
Click to expand...
Click to collapse
Then enter password and hit enter.
Then it well say something like:
make: /opt/toolchains/arm-2009q3/bin/arm-none-linux-gnueabi-gcc: Command not found
Click to expand...
Click to collapse
IGNORE THIS! It is just a fragment in a configuration file that says the toolchain is not in the default location. But, we changed the tool chain location in step 3 so it well compile correctly.
This cleans up and organizes the kernel for compilation.
Now enter this command in terminal:
make c1_rev05_na_spr_defconfig
Click to expand...
Click to collapse
This is the configuration files for the epic touch 4g and well compile the kernel based off what is in these files.
Now were going to compile all the modules so wifi,vibration... work.
Enter this in terminal:
make modules
Click to expand...
Click to collapse
Step 5: Moving the newly compiled modules to the initramfs/lib/modules folder.
We are now going to move the modules from the newly compiled modules to the initramfs files. So that wifi and vibration well be working in our kernel.
*Initramfs files are the root filesystem of the kernel and does processes the kernel can't do itself while its booting.
You can do this by terminal or by hand. We are just moving the modules to the initramfs to be used when compiling the kernel.
You can type this into terminal (Where it says “Path to initramfs” you need to replace with your own path to the initramfs folder + /lib/modules) :
cp drivers/samsung/j4fs/j4fs.ko Path to initramfs/lib/modules
cp drivers/scsi/scsi_wait_scan.ko Path to initramfs/lib/modules
cp drivers/bluetooth/bthid/bthid.ko Path to initramfs/lib/modules
cp drivers/net/wireless/bcm4330/dhd.ko Path to initramfs/lib/modules
cp drivers/samsung/vibetonz/vibrator.ko Path to initramfs/lib/modules
cp drivers/staging/westbridge/astoria/switch/cyasswitch.ko Path to initramfs/lib/modules
Click to expand...
Click to collapse
This copies the new modules out of the kernel source and puts them in the initramfs/lib/modules folder to be used later.
Now once you enter that press enter.
Step 7: Compiling the android kernel with initramfs.
Type this in terminal:
make -j5 CONFIG_INITRAMFS_SOURCE=Path to initramfs file
Click to expand...
Click to collapse
*Remember to replace the “path to initramfs file” with the path to the initramfs file.
Okay this well take anywhere from 5-15 mins. to compile depending on your system.
Step 8: Were done compiling, lets make something flashable for Odin!
Just type in terminal:
cd arch/arm/boot/
Click to expand...
Click to collapse
Then type:
tar cvf MyKernel.tar zImage
Click to expand...
Click to collapse
This well zip up the zimage (the kernel) you just compiled to something flashable in odin.
If you open up the kernel source file and go to arch/arm/boot you well see the zimage you compiled and, the Mykernel.tar file for Odin. Double check and right click on the zimage and make sure it is around 5-6 MB before flashing.
Step 9: Flashing to your phone.
Go to a windows computer and download Odin.(if you have rooted your phone using zedomax's method you should have it installed already)
Okay now open it up and place the Mykernel.tar file in the PDA section of Odin. Now download the drivers for your phone if you haven't.(I assume you already have.) Then put your phone in download mode (hold volume down button and power button on start up and push volume up button when the warning pops up) Now plug your phone into the computer and make sure “auto-reboot” is the only box checked in Odin. Hit start and your phone well be flashed with a kernel you compiled yourself! If you did this right your phone should start up. If it is stuck in a boot loop, immediately put back in download mode and flash to stock. Link available here to stock files:
http://forum.xda-developers.com/showthread.php?t=1409634
and, try to figure out what you did wrong while compiling and try again!
Good job you have finished!
Step 10: The future and your new phone!
I would like to include more android kernel mods and stuff in the future but, wanted to get this out there to get people familiar with the android compiling process. I want this guide to be something people reference as they start to develop, by using the methods here along with kernel and U.I mods on the platform being implemented in the future. My ultimate goal is to at least know I helped at least one person get into android development so, if I helped you please leave a reply or say thanks. If anyone has ideas to add to the post, please pm me.
Have fun developing!
I'll take this...
and this...
One more...
Awesome!!!! I have been patiently awaiting this. THANK YOU SOOO MUCH!!!!
Sent from my SPH-D710 using xda premium
Thank you! Definitely will be referring to this during my free time. Can't wait to see what else gets added
Sent from my SPH-D710 using xda premium
Awesome!! tyvm!!
Wow... How awesome is this? I have been looking for something like this for a long time. I will be watching for updates. Thank you very much.
all u need now is a video tutorial
My man!!! Thank you for this!!
Sent from this phone
Awesome guide, I am looking forward to giving this a go soon. Just curious but how difficult is the process to include a custom recovery?
dtm_stretch said:
Awesome guide, I am looking forward to giving this a go soon. Just curious but how difficult is the process to include a custom recovery?
Click to expand...
Click to collapse
It all depends if you wanted to flash a already made custom recovery (cwm) then we would just haved to root the kernel then build and flash the recovery. If you were to make a fully custom recovery with custom functions made by you then it could get a little more tricky but, I am guessing you just mean flashing a custom recovery like cwm. Which is not terribly hard but, not neccesary easy eather depending on how hard it is to obtain root.
I might update the guide in the future. Showing how to do something like this but, I have a few more ideas for the guide before I include this.
You nailed it, I was curious about adding root and CWM(or a variation of it). I am more than content with figuring out what you have posted so far.
Thank you so much. This is absolutely great!
Sent from my SPH-D710 using XDA App
Awesome guide. Thank u so much for this. Hope for many more.
Sent from my Nexus S 4G using xda premium
Very awesome thanks for the share!!
Sent from my SPH-D710 using XDA App
Great Guide!
Very informative and well put, Thank You.
thank you very much for this! Gives me something new to try out. Thanks again!!!
Sent from my SPH-D710 using Tapatalk
Thanks for this effort. Unfortunately I don't have anything to contribute to your work. I consider myself a budding developer and have been diligently teaching myself to program with the use of some great texts over the last 2 weeks. While I have much to learn this guide and hopefully any additions you make will help me dive nose first into Android development like I've been hoping to for the last couple of years.
I hope you continue to add more into this guide and it becomes a great resource for others like me.
Great Job!
obelisk79 said:
Thanks for this effort. Unfortunately I don't have anything to contribute to your work. I consider myself a budding developer and have been diligently teaching myself to program with the use of some great texts over the last 2 weeks. While I have much to learn this guide and hopefully any additions you make will help me dive nose first into Android development like I've been hoping to for the last couple of years.
I hope you continue to add more into this guide and it becomes a great resource for others like me.
Great Job!
Click to expand...
Click to collapse
I hope it helps!
Spice Mi-350n Super thread !
DISCLAIMER: I'm not responsible for any damage caused to your device by these instructions (though it may not happen!).
Hi everyone,
this thread will have everything for your Spice-Mi 350n.
Put you general discussions here (or) at Spice Mi-350n thread !
NEW Spice Mi-350n dedicated website !! Under development !! Have a look at it HERE
____________________________________________________________________________________________________________________________
SPICY MODS
____________________________________________________________________________________________________________________________
Go here: http://forum.xda-developers.com/showthread.php?p=24955301#post24955301
____________________________________________________________________________________________________________________________
NEW CUSTOM ROMs !
(alphabetical)
____________________________________________________________________________________________________________________________
1. ROM ATLANTIS (deodexed) : HERE !
Click to expand...
Click to collapse
2. BALA's ROM(odexed & deodexed): HERE !
Click to expand...
Click to collapse
Everyone try and reply !!
____________________________________________________________________________________________________________________________
I . ROOTING :
____________________________________________________________________________________________________________________________
First of all root your phone. Didn't root your phone yet ? Don't worry. Follow this guide here: http://forum.xda-developers.com/showthread.php?t=1472026
____________________________________________________________________________________________________________________________
FLASHING TUTORIAL - UNBRICKING GUIDE :
____________________________________________________________________________________________________________________________
Flashing Tutorial (also for Unbricking your phone) by yasirmujtaba : http://forum.xda-developers.com/showthread.php?p=24516131#post24516131
HIT THANKS IF IT HELPED YOU !!
___________________________________________________________________________________________________________________________
II . BACK-UP STOCK ROM/ ROM DUMP :
___________________________________________________________________________________________________________________________
1) ROOT is necessary. It is recommended to put the phone in 'Airplane mode' so that it won't disturb the process and make sure you have ~500 mb space in SD card.
2) Download 'BackUpTools.rar' from Tools Box (scroll down) or attachments and extract it to your SD Card. You'll have 2 folders - 'gscript' and 'Install'.
3) Install 'GScriptLite.apk' from gscript folder.
3) After installation, open the 'GScriptLite' application -> Menu -> Add Script.
4) Tick 'Needs SU ?'
5) Click 'Load File' and select 'Back23.sh' and then select 'save'
6) Now Click on 'Back 23' and Super User will ask for Permission and allow it. Nothing more to touch. Wait for few minutes. After few mins, it will say 'Auto Close is Cancelled'. Now its safe to close.
7) Your Back-Up will be in 'backup_' folder located in your SD card's root.
It will have files named ' firmware.info, preloader.img, nvram.img, seccnfg.img, uboot.img, boot.img, recovery.img, secstatic. img, misc.img, logo.img, expdb.img, cache.img, system.img, data.img' in that folder. Copy it to your computer and keep it at a safe place. More Over if you are posting in the forums or sharing it online, don't include ' data.img, cache.img and nvram.img' as they contain your personal information.
______________________________________________________________________________________________________________________________
III . RECOVERY :
______________________________________________________________________________________________________________________________
Default android recovery lacks few important features such as 'Back-up/Restore', 'Partition SD' etc.
Here is a working recovery that can be replaced with your default recovery.
-- MODDED RECOVERY (4pda.ru):
[Working Successfully!]
Screen Shot
It is a very useful recovery with many features. It is a must if you want to mod your phone !
Downloads: download from the Tools Box or attachments.
Installation Instructions:
Extract the downloaded 'Modded Recovery.zip' to you SD card. It will have a *.img file.
Download and install MobileUncle Tools. Get it from Tools Box or attachments !
Install and open MobileUncle Tools -> Get Started -> Flash Recovery from SD -> Select the extracted *.img file. Allow it when it asks for SuperUser permission. It should take less than few minutes. Enjoy the new features !
IMPORTANT TIP: After installing modded recovery, do a full a nandroid backup.
Intructions: Go to Recovery mode[HOME button + Volume Up + Power Button] -> Backup/restore.
[IMP: NOT WORKING]ClockWorkMod [CWM] Recovery(China-Iphone.ru):
It is claimed that it works with every MTK6573, 650mhz, Android 2.3 (B63M) device.It is not working with our device. No problem. Modded recovery will do everything for you !
Download (AT YOUR OWN RISK): download from the Tools Box or attachments.
Same installation instructions. Even if you try this and it doesn't work, don't get afraid. Boot normally and flash MODDED RECOVERY through MobileUncle Tools ! Enjoy !
Well, if you think you can make it work, try and edit it !
____________________________________________________________________________________________________________________________________
TOOLS BOX :
____________________________________________________________________________________________________________________________________
ADB Drivers: Click HERE
Back Up Tools: Click HERE
Mobile Uncle Tools: Click HERE
Recovery:--Working Modded Recovery: Click HERE
--(Not Working) CWM Recovery: Click Click HERE
Super One Click v2.3.1: Click HERE
_____________________________________________________________________________________________________________________________
CREDITS:
_____________________________________________________________________________________________________________________________
Sincere credits to linerty, Highwaystar and all users of this phone, 4pda.ru, china-iphone.ru, moyfly.ru, more importantly GOOGLE TRANSLATE !! ! And cheers to all Spice Mi-350n users !
Few more to come !! Keep checking or subscribe this thread !!
Hit THANKS if i helped you
Flashing Tutorial ..........Coming Soon !
Last reserve !
awesome bro........
can you please provide
com.huan.launcher 's apk I deleted that mistakenly .....
good job... can you provide me build. prop. .. i seem to have messed up mine.
what is build.prop can you please explain
yasirmujtaba said:
what is build.prop can you please explain
Click to expand...
Click to collapse
it's one of the most important file. my video recording is not working because i messed up my build. prop. .. so don't mess with it if you don't know what you are doing. use root explorer and find it in system folder.. ..
copy the build. prop and give me if you can.
Im having a problem with Backing Up ROM
it shows close(Auto closing is canceled) instead of Disable
Now what should i do..
Plz help
yasirmujtaba said:
awesome bro........
can you please provide
com.huan.launcher 's apk I deleted that mistakenly .....
Click to expand...
Click to collapse
Default launcher error ?? Then here is the default launcher's [LauncherHQ] apk from /system/app !!
build.prop !
billamin said:
good job... can you provide me build. prop. .. i seem to have messed up mine.
Click to expand...
Click to collapse
build.prop from root !! Here it is !! (it is compressed as .rar and NOT renamed!)
Auto Closing is cancelled !
maitreyapatni said:
it shows close(Auto closing is canceled) instead of Disable
Now what should i do..
Plz help
Click to expand...
Click to collapse
Thanks man ! i had typed it wrong ! it is actually 'Auto Closing is cancelled' don't worry there's nothing in that....it is just a hint for you know that backing up is over !!
billamin said:
it's one of the most important file. my video recording is not working because i messed up my build. prop. .. so don't mess with it if you don't know what you are doing. use root explorer and find it in system folder.. ..
copy the build. prop and give me if you can.
Click to expand...
Click to collapse
Here it Is What You Want My New Firmware's Build.prop
Download It From Attachments
yasirmujtaba said:
Here it Is What You Want My New Firmware's Build.prop
Download It From Attachments
Click to expand...
Click to collapse
New Firmware ??????
balamu96m said:
New Firmware ??????
Click to expand...
Click to collapse
I mean the firmware just after Flashing...........
---------- Post added at 02:04 PM ---------- Previous post was at 01:48 PM ----------
yasirmujtaba said:
I mean the firmware just after Flashing...........
Click to expand...
Click to collapse
I Have A Gift For You Friends
Here -
http://forum.xda-developers.com/showthread.php?p=23246387
yasirmujtaba said:
I mean the firmware just after Flashing...........
---------- Post added at 02:04 PM ---------- Previous post was at 01:48 PM ----------
I Have A Gift For You Friends
Here -
http://forum.xda-developers.com/showthread.php?p=23246387
Click to expand...
Click to collapse
Is that working ??? i can't try because i'm always using Wi-fi in my home.....if someone tries n reply, it would be helpful !!
balamu96m said:
Is that working ??? i can't try because i'm always using Wi-fi in my home.....if someone tries n reply, it would be helpful !!
Click to expand...
Click to collapse
You Can Turn Off Your Wifi And Then Try
Balance Must be Under 30 paisa
yasirmujtaba said:
You Can Turn Off Your Wifi And Then Try
Balance Must be Under 30 paisa
Click to expand...
Click to collapse
Former Rokr e6 user?? Member in motorolafans.com forums??
yup I am..........
build. prop edited
hi, here is the modified build.prop. check it out
Hi guys, I've opened this thread so we can talk about the camera developement for CM9.
Here is the link including files and a how-to.
Here is the second link if you want even clearler instructions (Thanks to texten)
andy did u try it?( camera work)
Sent from my GT-I8150 using xda premium
Nothing, isn't working for me...
EDIT: I've an alpha 3, flashed the zip, and checked the permissions... Waiting for Arco...
I think we are missing with something..hopefully our Mentor. arco68 have the time to pass thru ere..
Can somebody poke alisd too...NVM I think I just did
http://forum.xda-developers.com/showthread.php?p=26384027
Sent from my GT-I8150 using Tapatalk 2
We can wait xD
iSadic said:
Nothing, isn't working for me...
Click to expand...
Click to collapse
+1
I tried very quickly 'cuz I don't have much time, but oisis' update zip+alpha2 didn't work.
this link is better:
http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
have fun!
texten said:
this link is better:
http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
have fun!
Click to expand...
Click to collapse
tried the instructions, but not working...
mike_kenji said:
tried the instructions, but not working...
Click to expand...
Click to collapse
maybe you will need to replace the "firmware"folder in that zip with firmware folder of gingerbread for you device
also the same procedure for the "media_profile.xml" in etc...
this could work:
just take that zip in my post, replace firmware folder and the media_profile.xml with the ones of your latest gingerbread...
and follow the installation instructions in my post
texten said:
this link is better:
http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
have fun!
Click to expand...
Click to collapse
texten said:
maybe you will need to replace the "firmware"folder in that zip with firmware folder of gingerbread for you device
Click to expand...
Click to collapse
where can i find those files? is the camera working for you?
mike_kenji said:
where can i find those files? is the camera working for you?
Click to expand...
Click to collapse
look here http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
you can see whats working and whats not working...
you can use the camera_experimental-0.1.zip
but you need to replace the firmware folder and the media_profile.xml in that zip with the ones of the latest gingerbread for your device
and do not forget to follow the installation instructions
for your further development on camera, you can also use these "instructions for camera testers"
(maybe you will add these to post#1 of this topic here)
--------------------------
here are instructions for camera testers:
Few important things:
1. make notes, because we will need it to restore steps.
2. make a logcat:
Code:
adb logcat -d > logcat.txt
if you want, edit logs like that (less logs - easier to read, logs only related with camera):
Linux shell:
Code:
cat ./logcat.txt | grep camera > logcat.new.txt
Windows cmd:
Code:
type logcat.txt | findstr camera > nwelogcat.txt
3. If you will find in log that HAL cannot connect with camera do not post logs, because they are useless
4. Do not zip or rar logs = easier to read on phone
----------------------------------
Additional Links:
You can try files from these phones.
Phones with MSM8255:
- CDMA XPeria Play
- LG Revolution
- HTC Desire S
- Sony xperia mini,mini pro, neo etc - camera works
- My touch 4g - camera works
- Xperia play - camera works
- Htc desire s - camera works
- Huawei honor - official ICS
- Htc one V - no front camera but official ICS
- http://forum.xda-developers.com/showthread.php?t=1639634
Thanks to: Spider550 for links, he cannot post here yet.
----------------------------------------------------------------------
if you make a logcat, do not forget to post which files you used.
folders for all files:
do not forget to set permissions for changed files/folders like all other files/folders there... and reboot after all changes you made!
*.so files to /system/lib
media_profile.xml to /system/etc
camera.apk to /system/app
firmware files to /system/firmware (maybe you have to create a folder)
---------
now you can start with testing.
for logcat = shutdown device - boot - start camtests - after that make a logcat directly.
texten said:
look here http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
you can see whats working and whats not working...
you can use the camera_experimental-0.1.zip
but you need to replace the firmware folder and the media_profile.xml in that zip with the ones of the latest gingerbread for your device
Click to expand...
Click to collapse
i'll try this in a while... thanks a lot... sorry for being a noob...
mike_kenji said:
i'll try this in a while... thanks a lot... sorry for being a noob...
Click to expand...
Click to collapse
no problem, maybe one other user of your device will give it a try
texten said:
no problem, maybe one other user of your device will give it a try
Click to expand...
Click to collapse
uhm... one last question, where do i put the firmware files? hehehe
*EDIT
nevermind, found it... thanks again!
mike_kenji said:
uhm... one last question, where do i put the firmware files? hehehe
Click to expand...
Click to collapse
open the zip file, delete the folder "firmware" and push your firmware folder from the latest gingerbread of your device on that place...
the same do with media_profile.xml
texten said:
open the zip file, delete the folder "firmware" and push your firmware folder from the latest gingerbread of your device on that place...
the same do with media_profile.xml
Click to expand...
Click to collapse
thanks.... wish me luck
mike_kenji said:
thanks.... wish me luck
Click to expand...
Click to collapse
good luck.
hahaha, i'm stuck on a bootloop.... try again...
AUTOSCRIPTS
Hi Everybody!
That's my first work for the Moto X Play so I hope You'll appreciate it.
It's simply an automatic flash script, just in case You won't have to remember all these shi*ty codes.
It's personally created and tested by me, so I'm sure it works, but I don't assume any responsibility for damaged devices.
!!REMEMBER! I DON'T PROVIDE ANY STOCK ROM!!
My script (as you'll see) works both with Ubuntu (and derivates), Fedora (yes, both with dnf and yum installer) and Windows.
If you have any question/suggest feel free to post it here and if I helped you feel free (too) to hit thank and maybe buy me a coca (I don't really like alchoholic drinks).
HOW TO1) Download it from MY GITHUB PAGE.
2) Put on your Home Folder (or anywhere You want).
3) Unzip it (You'll see a file called flash.sh, for linux users, and some files for windows users).
4) Open a terminal and cd the folder where you have saved flash.sh.
5) Copy the code below (for Linux) or simply double-click on flash.bat (for Windows. It doesn't request administrator privilegies).
Code:
$ chmod +x flash.sh
$ ./flash.sh
6) Follow the instructions on screen.
7) Enjoy.
BUGSAll the Scripts is tested personally by me before any upload so I'm sure they'll work. Anyway if you encounter any problems please post it in bug's tab HERE!
VERSIONSAutoScript Linux
Fixed Wipe and NoWipe options.
Added support for ArchLinux (both with pacman and yaourt)
BugFix
NEW:
1) Added sperimental support for Gentoo linux and other OS's with emerge (I haven't Gentoo so I don't assure it works as expected!)
2) One script for rule 'em all!
AutoScript Windows
Added a script for logcat.
Cleaned the codes on flash.bat.
Added ability to exit the script on any question simply press K.
Fix some bugs and clean code.
Added ability to relock the device
BugFix
F.A.Q.1) Why it doesn't work with device XYZ?
It's because my AutoScripts is developed only for Moto X Play.
2) The Scripts have only formatted my device. You piece of sh*t!!1!11!
Have you downloaded the ROM and put the files on the Flash's folder? You can find it HERE.
3) When do you upload an update?
I'll do it as soon as possible. Don't hassle me with that unuseful quest please.
4) Thank man, your work is fantastic!
Please hit thank button, don't write a post for that.
5) I've read your work and the codes is fuc*ing ugly and long.
I know. If you have a suggestion please tell me and I'll see if i can do anything.
XDA:DevDB Information
AutoScripts, ROM for the Moto X Play
Contributors
ScardracS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Stock
Version Information
Status: Stable
Stable Release Date: 2016-06-19
Created 2016-06-19
Last Updated 2019-03-05
Reserved
Is this rooted? And bloats removed.?
Sent from my XT1562 using Tapatalk
manan001 said:
Is this rooted? And bloats removed.?
Sent from my XT1562 using Tapatalk
Click to expand...
Click to collapse
It's just a helper script to install stock
manan001 said:
Is this rooted? And bloats removed.?
Sent from my XT1562 using Tapatalk
Click to expand...
Click to collapse
No, It isn't. I could ask to @GtrCraft if I can use his rooted version.
ScardracS said:
No, It isn't. I could ask to @GtrCraft if I can use his rooted version.
Click to expand...
Click to collapse
Yeah go ahead, also can you make a script without the userdata wipe and tell us which stock version is present in the zip (variant, build number etc.)?
Sent from my XT1562 using XDA Labs
Windows script
I made a Windows version of the script.
Copy the Firmware into the folder
Run flash file and follow the instructions.
Download: https://drive.google.com/file/d/0B4ryT_zqtaHWWFhldFpfNFBjVDA/view?usp=sharing
It's possible to add support to dual sim xt..63 br?
Thx! Nice idea.
GtrCraft said:
Yeah go ahead, also can you make a script without the userdata wipe and tell us which stock version is present in the zip (variant, build number etc.)?
Sent from my XT1562 using XDA Labs
Click to expand...
Click to collapse
Thanks. The build is based on MPD24.107-52 for the XT1562
axxx007xxxz said:
I made a Windows version of the script.
Copy the Firmware into the folder
Run flash file and follow the instructions.
Download: https://drive.google.com/file/d/0B4ryT_zqtaHWWFhldFpfNFBjVDA/view?usp=sharing
Click to expand...
Click to collapse
Thanks man! I'll add it to my main script (with proper credits )
I'm uploading the V2 with the script for Windows, thanks to @axxx007xxxz, (I haven't tested if it work 'cause I haven't Windows).
In the script for linux I've also added the possibility to delete (or not) userdata
P.S.
For XT1563 and rooted version expect tomorrow 'cause I'm too busy, sorry
i need unlock the bootloader?
Sorry for my loong absence but I was really busy on the real world. I'm working on a few bugs of my AutoScript (I was missing some codes). I hope @axxx007xxxz will update his Script for Windows soon.
Tried this yesterday, works like a charm, I used the windows script.
@ismatab this script is for people who have unlocked their phone and want to return to stock build. If you have your bootloader locked you can't flash it
Uploading new build. Now you don't need to put your device in bootloader mode before plug it to the PC 'cause the script do it automatically
[ROM][STOCK][SCRIPT] Stock Rom with AutoFlash Script
ScardracS said:
Uploading new build. Now you don't need to put your device in bootloader mode before plug it to the PC 'cause the script do it automatically
Click to expand...
Click to collapse
I'll upload Windows script soon, sorry for the delay.
So right now i have CM13 installed, but would like to go back to stock. I am rooted and have an european version (dual Sim) I am on windows.
If i use the windows script, i just have to follow the instruction ? do i need to download a stock rom first ? is (/XT1562_LUX_RETEU_6.0.1_MPD24.107-52_cid7) the good one ?
It doesnt matter if i loose my data. i would prefer to actually as i want a fresh install.
Will i keep my phone rooted ?
Thanks for the tool and your answers !
Cheers
QuentinPdeB said:
So right now i have CM13 installed, but would like to go back to stock. I am rooted and have an european version (dual Sim) I am on windows.
If i use the windows script, i just have to follow the instruction ? do i need to download a stock rom first ? is (/XT1562_LUX_RETEU_6.0.1_MPD24.107-52_cid7) the good one ?
It doesnt matter if i loose my data. i would prefer to actually as i want a fresh install.
Will i keep my phone rooted ?
Thanks for the tool and your answers !
Cheers
Click to expand...
Click to collapse
If you open Download's tab you'll se a file called Stock vX.zip. It contains the stock rom plus the file script.bat. You have simply to double click on it.
For the ROM 6 .0.1 it most be added the system.img_sparsechunk.9 line to the script, also the Stock vX.zip dont say if is compatible with XT1563, the Windows.zip in other comments said this, also, in Windows Zip the ADB is missing.
Anyway, thaks for the script